Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a few powerpc bits & fixes for rc1.  A couple of str*cpy
  fixes, some fixes in handling the FSCR register on Power8 (controls
  the enabling of processor features), a 32-bit build fix and a couple
  more nits."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Set DSCR bit in FSCR setup
  powerpc: Add DSCR FSCR register bit definition
  powerpc: Fix setting FSCR for HV=0 and on secondary CPUs
  powerpc: Wireup the kcmp syscall to sys_ni
  powerpc: Remove unused BITOP_LE_SWIZZLE macro
  powerpc: Avoid link stack corruption in MMU on syscall entry path
  drivers/tty/hvc: Use strlcpy instead of strncpy
  powerpc/pseries/hvcserver: Fix strncpy buffer limit in location code
  powerpc: Fix compile of sha1-powerpc-asm.S on 32-bit

arch/powerpc/crypto/sha1-powerpc-asm.S

@@ -113,7 +113,7 @@
 	STEPUP4((t)+16, fn)
 
 _GLOBAL(powerpc_sha_transform)
-	PPC_STLU r1,-STACKFRAMESIZE(r1)
+	PPC_STLU r1,-INT_FRAME_SIZE(r1)
 	SAVE_8GPRS(14, r1)
 	SAVE_10GPRS(22, r1)
 
@@ -175,5 +175,5 @@ _GLOBAL(powerpc_sha_transform)
 
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)
-	addi	r1,r1,STACKFRAMESIZE
+	addi	r1,r1,INT_FRAME_SIZE
 	blr

arch/powerpc/include/asm/bitops.h

@@ -52,8 +52,6 @@
 #define smp_mb__before_clear_bit()	smp_mb()
 #define smp_mb__after_clear_bit()	smp_mb()
 
-#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
-
 /* Macro for generating the ***_bits() functions */
 #define DEFINE_BITOP(fn, op, prefix, postfix)	\
 static __inline__ void fn(unsigned long mask,	\

arch/powerpc/include/asm/reg.h

@@ -266,7 +266,8 @@
 #define SPRN_HSRR0	0x13A	/* Hypervisor Save/Restore 0 */
 #define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
 #define SPRN_FSCR	0x099	/* Facility Status & Control Register */
-#define FSCR_TAR	(1<<8)	/* Enable Target Adress Register */
+#define   FSCR_TAR	(1 << (63-55)) /* Enable Target Address Register */
+#define   FSCR_DSCR	(1 << (63-61)) /* Enable Data Stream Control Register */
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0	(1ul << (63-0))

arch/powerpc/include/asm/systbl.h

@@ -358,3 +358,4 @@ SYSCALL_SPU(setns)
 COMPAT_SYS(process_vm_readv)
 COMPAT_SYS(process_vm_writev)
 SYSCALL(finit_module)
+SYSCALL(ni_syscall) /* sys_kcmp */

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		354
+#define __NR_syscalls		355
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls

arch/powerpc/include/uapi/asm/unistd.h

@@ -376,6 +376,7 @@
 #define __NR_process_vm_readv	351
 #define __NR_process_vm_writev	352
 #define __NR_finit_module	353
+#define __NR_kcmp		354
 
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/cpu_setup_power.S

@@ -48,6 +48,7 @@ _GLOBAL(__restore_cpu_power7)
 
 _GLOBAL(__setup_cpu_power8)
 	mflr	r11
+	bl	__init_FSCR
 	bl	__init_hvmode_206
 	mtlr	r11
 	beqlr
@@ -56,13 +57,13 @@ _GLOBAL(__setup_cpu_power8)
 	mfspr	r3,SPRN_LPCR
 	oris	r3, r3, LPCR_AIL_3@h
 	bl	__init_LPCR
-	bl	__init_FSCR
 	bl	__init_TLB
 	mtlr	r11
 	blr
 
 _GLOBAL(__restore_cpu_power8)
 	mflr	r11
+	bl	__init_FSCR
 	mfmsr	r3
 	rldicl.	r0,r3,4,63
 	beqlr
@@ -115,7 +116,7 @@ __init_LPCR:
 
 __init_FSCR:
 	mfspr	r3,SPRN_FSCR
-	ori	r3,r3,FSCR_TAR
+	ori	r3,r3,FSCR_TAR|FSCR_DSCR
 	mtspr	SPRN_FSCR,r3
 	blr
 

arch/powerpc/kernel/exceptions-64s.S

@@ -74,13 +74,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)				\
 	mflr	r10 ;						\
 	ld	r12,PACAKBASE(r13) ; 				\
 	LOAD_HANDLER(r12, system_call_entry_direct) ;		\
-	mtlr	r12 ;						\
+	mtctr	r12 ;						\
 	mfspr	r12,SPRN_SRR1 ;					\
 	/* Re-use of r13... No spare regs to do this */	\
 	li	r13,MSR_RI ;					\
 	mtmsrd 	r13,1 ;						\
 	GET_PACA(r13) ;	/* get r13 back */			\
-	blr ;
+	bctr ;
 #else
 	/* We can branch directly */
 #define SYSCALL_PSERIES_2_DIRECT				\

arch/powerpc/platforms/pseries/hvcserver.c

@@ -23,6 +23,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/string.h>
 
 #include <asm/hvcall.h>
 #include <asm/hvcserver.h>
@@ -188,9 +189,9 @@ int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head,
 			= (unsigned int)last_p_partition_ID;
 
 		/* copy the Null-term char too */
-		strncpy(&next_partner_info->location_code[0],
+		strlcpy(&next_partner_info->location_code[0],
 			(char *)&pi_buff[2],
-			strlen((char *)&pi_buff[2]) + 1);
+			sizeof(next_partner_info->location_code));
 
 		list_add_tail(&(next_partner_info->node), head);
 		next_partner_info = NULL;

drivers/tty/hvc/hvcs.c

@@ -881,17 +881,12 @@ static struct vio_driver hvcs_vio_driver = {
 /* Only called from hvcs_get_pi please */
 static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd)
 {
-	int clclength;
-
 	hvcsd->p_unit_address = pi->unit_address;
 	hvcsd->p_partition_ID  = pi->partition_ID;
-	clclength = strlen(&pi->location_code[0]);
-	if (clclength > HVCS_CLC_LENGTH)
-		clclength = HVCS_CLC_LENGTH;
 
 	/* copy the null-term char too */
-	strncpy(&hvcsd->p_location_code[0],
-			&pi->location_code[0], clclength + 1);
+	strlcpy(&hvcsd->p_location_code[0],
+			&pi->location_code[0], sizeof(hvcsd->p_location_code));
 }
 
 /*