Commit a0286c7b authored by Nitin Yadav's avatar Nitin Yadav Committed by Vignesh Raghavendra

arm64: dts: ti: k3-am62: Add GPMC and ELM nodes

Add GPMC and ELM device tree nodes for AM62 SoC family.
Signed-off-by: default avatarNitin Yadav <n-yadav@ti.com>
Signed-off-by: default avatarRoger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240622-am62lp-sk-nand-v1-1-caee496eaf42@kernel.orgSigned-off-by: default avatarVignesh Raghavendra <vigneshr@ti.com>
parent 3a36c535
...@@ -1053,4 +1053,33 @@ dphy0: phy@30110000 { ...@@ -1053,4 +1053,33 @@ dphy0: phy@30110000 {
status = "disabled"; status = "disabled";
}; };
gpmc0: memory-controller@3b000000 {
compatible = "ti,am64-gpmc";
power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 80 0>;
clock-names = "fck";
reg = <0x00 0x03b000000 0x00 0x400>,
<0x00 0x050000000 0x00 0x8000000>;
reg-names = "cfg", "data";
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
gpmc,num-cs = <3>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
elm0: ecc@25010000 {
compatible = "ti,am64-elm";
reg = <0x00 0x25010000 0x00 0x2000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 54 0>;
clock-names = "fck";
status = "disabled";
};
}; };
...@@ -68,11 +68,13 @@ cbass_main: bus@f0000 { ...@@ -68,11 +68,13 @@ cbass_main: bus@f0000 {
<0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
<0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
<0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
<0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
<0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
<0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
<0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
<0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
<0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
<0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
<0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
<0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
<0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment