qlcnic: Fix bug in Tx completion path

o Driver is using common tx_clean_lock for all Tx queues. This patch
  adds per queue tx_clean_lock.
o Driver is not updating sw_consumer while processing Tx completion
  when interface is going down. Fixed in this patch.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -579,6 +579,8 @@ struct qlcnic_host_tx_ring {
 	dma_addr_t phys_addr;
 	dma_addr_t hw_cons_phys_addr;
 	struct netdev_queue *txq;
+	/* Lock to protect Tx descriptors cleanup */
+	spinlock_t tx_clean_lock;
 } ____cacheline_internodealigned_in_smp;
 
 /*
@@ -1095,7 +1097,6 @@ struct qlcnic_adapter {
 	struct qlcnic_filter_hash rx_fhash;
 	struct list_head vf_mc_list;
 
-	spinlock_t tx_clean_lock;
 	spinlock_t mac_learn_lock;
 	/* spinlock for catching rcv filters for eswitch traffic */
 	spinlock_t rx_mac_learn_lock;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c

@@ -134,6 +134,8 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter,
 	struct qlcnic_skb_frag *buffrag;
 	int i, j;
 
+	spin_lock(&tx_ring->tx_clean_lock);
+
 	cmd_buf = tx_ring->cmd_buf_arr;
 	for (i = 0; i < tx_ring->num_desc; i++) {
 		buffrag = cmd_buf->frag_array;
@@ -157,6 +159,8 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter,
 		}
 		cmd_buf++;
 	}
+
+	spin_unlock(&tx_ring->tx_clean_lock);
 }
 
 void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter)

drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c

@@ -782,7 +782,7 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter,
 	struct net_device *netdev = adapter->netdev;
 	struct qlcnic_skb_frag *frag;
 
-	if (!spin_trylock(&adapter->tx_clean_lock))
+	if (!spin_trylock(&tx_ring->tx_clean_lock))
 		return 1;
 
 	sw_consumer = tx_ring->sw_consumer;
@@ -811,8 +811,9 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter,
 			break;
 	}
 
-	if (count && netif_running(netdev)) {
 	tx_ring->sw_consumer = sw_consumer;
+
+	if (count && netif_running(netdev)) {
 		smp_mb();
 		if (netif_tx_queue_stopped(tx_ring->txq) &&
 		    netif_carrier_ok(netdev)) {
@@ -838,7 +839,8 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter,
 	 */
 	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
 	done = (sw_consumer == hw_consumer);
-	spin_unlock(&adapter->tx_clean_lock);
+
+	spin_unlock(&tx_ring->tx_clean_lock);
 
 	return done;
 }

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

@@ -1756,7 +1756,6 @@ void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev)
 	if (qlcnic_sriov_vf_check(adapter))
 		qlcnic_sriov_cleanup_async_list(&adapter->ahw->sriov->bc);
 	smp_mb();
-	spin_lock(&adapter->tx_clean_lock);
 	netif_carrier_off(netdev);
 	adapter->ahw->linkup = 0;
 	netif_tx_disable(netdev);
@@ -1777,7 +1776,6 @@ void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev)
 
 	for (ring = 0; ring < adapter->drv_tx_rings; ring++)
 		qlcnic_release_tx_buffers(adapter, &adapter->tx_ring[ring]);
-	spin_unlock(&adapter->tx_clean_lock);
 }
 
 /* Usage: During suspend and firmware recovery module */
@@ -2172,6 +2170,7 @@ int qlcnic_alloc_tx_rings(struct qlcnic_adapter *adapter,
 		}
 		memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
 		tx_ring->cmd_buf_arr = cmd_buf_arr;
+		spin_lock_init(&tx_ring->tx_clean_lock);
 	}
 
 	if (qlcnic_83xx_check(adapter) ||
@@ -2299,7 +2298,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rwlock_init(&adapter->ahw->crb_lock);
 	mutex_init(&adapter->ahw->mem_lock);
 
-	spin_lock_init(&adapter->tx_clean_lock);
 	INIT_LIST_HEAD(&adapter->mac_list);
 
 	qlcnic_register_dcb(adapter);