Commit a02cc9d3 authored by Michal Schmidt's avatar Michal Schmidt Committed by David S. Miller

bnx2x: allow adding VLANs while interface is down

Since implementing VLAN filtering in commit 05cc5a39
("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while
the interface is down:

  # ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10
  RTNETLINK answers: Bad address

and in dmesg (with bnx2x.debug=0x20):
  bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN
  configuration the interface is down

Other drivers have no problem with this.
Fix this peculiar behavior in the following way:
 - Accept requests to add/kill VID regardless of the device state.
   Maintain the requested list of VIDs in the bp->vlan_reg list.
 - If the device is up, try to configure the VID list into the hardware.
   If we run out of VLAN credits or encounter a failure configuring an
   entry, fall back to accepting all VLANs.
   If we successfully configure all entries from the list, turn the
   fallback off.
 - Use the same code for reconfiguring VLANs during NIC load.
Signed-off-by: default avatarMichal Schmidt <mschmidt@redhat.com>
Acked-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 4ef36e15
......@@ -12895,52 +12895,71 @@ static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add)
return rc;
}
int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
static int bnx2x_vlan_configure_vid_list(struct bnx2x *bp)
{
struct bnx2x_vlan_entry *vlan;
int rc = 0;
if (!bp->vlan_cnt) {
DP(NETIF_MSG_IFUP, "No need to re-configure vlan filters\n");
return 0;
}
/* Configure all non-configured entries */
list_for_each_entry(vlan, &bp->vlan_reg, link) {
/* Prepare for cleanup in case of errors */
if (rc) {
vlan->hw = false;
continue;
}
if (!vlan->hw)
if (vlan->hw)
continue;
DP(NETIF_MSG_IFUP, "Re-configuring vlan 0x%04x\n", vlan->vid);
if (bp->vlan_cnt >= bp->vlan_credit)
return -ENOBUFS;
rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
if (rc) {
BNX2X_ERR("Unable to configure VLAN %d\n", vlan->vid);
vlan->hw = false;
rc = -EINVAL;
continue;
BNX2X_ERR("Unable to config VLAN %d\n", vlan->vid);
return rc;
}
DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", vlan->vid);
vlan->hw = true;
bp->vlan_cnt++;
}
return rc;
return 0;
}
static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode)
{
bool need_accept_any_vlan;
need_accept_any_vlan = !!bnx2x_vlan_configure_vid_list(bp);
if (bp->accept_any_vlan != need_accept_any_vlan) {
bp->accept_any_vlan = need_accept_any_vlan;
DP(NETIF_MSG_IFUP, "Accept all VLAN %s\n",
bp->accept_any_vlan ? "raised" : "cleared");
if (set_rx_mode) {
if (IS_PF(bp))
bnx2x_set_rx_mode_inner(bp);
else
bnx2x_vfpf_storm_rx_mode(bp);
}
}
}
int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
{
struct bnx2x_vlan_entry *vlan;
/* The hw forgot all entries after reload */
list_for_each_entry(vlan, &bp->vlan_reg, link)
vlan->hw = false;
bp->vlan_cnt = 0;
/* Don't set rx mode here. Our caller will do it. */
bnx2x_vlan_configure(bp, false);
return 0;
}
static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
{
struct bnx2x *bp = netdev_priv(dev);
struct bnx2x_vlan_entry *vlan;
bool hw = false;
int rc = 0;
if (!netif_running(bp->dev)) {
DP(NETIF_MSG_IFUP,
"Ignoring VLAN configuration the interface is down\n");
return -EFAULT;
}
DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid);
......@@ -12948,93 +12967,47 @@ static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
if (!vlan)
return -ENOMEM;
bp->vlan_cnt++;
if (bp->vlan_cnt > bp->vlan_credit && !bp->accept_any_vlan) {
DP(NETIF_MSG_IFUP, "Accept all VLAN raised\n");
bp->accept_any_vlan = true;
if (IS_PF(bp))
bnx2x_set_rx_mode_inner(bp);
else
bnx2x_vfpf_storm_rx_mode(bp);
} else if (bp->vlan_cnt <= bp->vlan_credit) {
rc = __bnx2x_vlan_configure_vid(bp, vid, true);
hw = true;
}
vlan->vid = vid;
vlan->hw = hw;
if (!rc) {
list_add(&vlan->link, &bp->vlan_reg);
} else {
bp->vlan_cnt--;
kfree(vlan);
}
vlan->hw = false;
list_add_tail(&vlan->link, &bp->vlan_reg);
DP(NETIF_MSG_IFUP, "Adding VLAN result %d\n", rc);
if (netif_running(dev))
bnx2x_vlan_configure(bp, true);
return rc;
return 0;
}
static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
{
struct bnx2x *bp = netdev_priv(dev);
struct bnx2x_vlan_entry *vlan;
bool found = false;
int rc = 0;
if (!netif_running(bp->dev)) {
DP(NETIF_MSG_IFUP,
"Ignoring VLAN configuration the interface is down\n");
return -EFAULT;
}
DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid);
if (!bp->vlan_cnt) {
BNX2X_ERR("Unable to kill VLAN %d\n", vid);
return -EINVAL;
}
list_for_each_entry(vlan, &bp->vlan_reg, link)
if (vlan->vid == vid)
if (vlan->vid == vid) {
found = true;
break;
}
if (vlan->vid != vid) {
if (!found) {
BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid);
return -EINVAL;
}
if (vlan->hw)
if (netif_running(dev) && vlan->hw) {
rc = __bnx2x_vlan_configure_vid(bp, vid, false);
DP(NETIF_MSG_IFUP, "HW deconfigured for VLAN %d\n", vid);
bp->vlan_cnt--;
}
list_del(&vlan->link);
kfree(vlan);
bp->vlan_cnt--;
if (bp->vlan_cnt <= bp->vlan_credit && bp->accept_any_vlan) {
/* Configure all non-configured entries */
list_for_each_entry(vlan, &bp->vlan_reg, link) {
if (vlan->hw)
continue;
rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
if (rc) {
BNX2X_ERR("Unable to config VLAN %d\n",
vlan->vid);
continue;
}
DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n",
vlan->vid);
vlan->hw = true;
}
DP(NETIF_MSG_IFUP, "Accept all VLAN Removed\n");
bp->accept_any_vlan = false;
if (IS_PF(bp))
bnx2x_set_rx_mode_inner(bp);
else
bnx2x_vfpf_storm_rx_mode(bp);
}
if (netif_running(dev))
bnx2x_vlan_configure(bp, true);
DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment