cy82c693 update

drivers/ide/pci/cy82c693.h

+#ifndef CY82C693_H
+#define CY82C693_H
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+/* the current version */
+#define CY82_VERSION	"CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
+
+/*
+ *	The following are used to debug the driver.
+ */
+#define	CY82C693_DEBUG_LOGS	0
+#define	CY82C693_DEBUG_INFO	0
+
+/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */
+#undef CY82C693_SETDMA_CLOCK
+
+/*
+ *	NOTE: the value for busmaster timeout is tricky and I got it by
+ *	 trial and error!  By using a to low value will cause DMA timeouts
+ *	 and drop IDE performance, and by using a to high value will cause
+ *	 audio playback to scatter.
+ *	 If you know a better value or how to calc it, please let me know.
+ */
+
+/* twice the value written in cy82c693ub datasheet */
+#define BUSMASTER_TIMEOUT	0x50
+/*
+ * the value above was tested on my machine and it seems to work okay
+ */
+
+/* here are the offset definitions for the registers */
+#define CY82_IDE_CMDREG		0x04
+#define CY82_IDE_ADDRSETUP	0x48
+#define CY82_IDE_MASTER_IOR	0x4C	
+#define CY82_IDE_MASTER_IOW	0x4D	
+#define CY82_IDE_SLAVE_IOR	0x4E	
+#define CY82_IDE_SLAVE_IOW	0x4F
+#define CY82_IDE_MASTER_8BIT	0x50	
+#define CY82_IDE_SLAVE_8BIT	0x51	
+
+#define CY82_INDEX_PORT		0x22
+#define CY82_DATA_PORT		0x23
+
+#define CY82_INDEX_CTRLREG1	0x01
+#define CY82_INDEX_CHANNEL0	0x30
+#define CY82_INDEX_CHANNEL1	0x31
+#define CY82_INDEX_TIMEOUT	0x32
+
+/* the max PIO mode - from datasheet */
+#define CY82C693_MAX_PIO	4
+
+/* the min and max PCI bus speed in MHz - from datasheet */
+#define CY82C963_MIN_BUS_SPEED	25
+#define CY82C963_MAX_BUS_SPEED	33
+
+/* the struct for the PIO mode timings */
+typedef struct pio_clocks_s {
+        u8	address_time;	/* Address setup (clocks) */
+	u8	time_16r;	/* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
+	u8	time_16w;	/* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
+	u8	time_8;		/* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
+} pio_clocks_t;
+
+extern void init_setup_cy82c693(struct pci_dev *, ide_pci_device_t *);
+extern unsigned int init_chipset_cy82c693(struct pci_dev *, const char *);
+extern void init_hwif_cy82c693(ide_hwif_t *);
+extern void init_dma_cy82c693(ide_hwif_t *, unsigned long);
+
+static ide_pci_device_t cy82c693_chipsets[] __initdata = {
+	{
+		vendor:		PCI_VENDOR_ID_CONTAQ,
+		device:		PCI_DEVICE_ID_CONTAQ_82C693,
+		name:		"CY82C693",
+		init_setup:	init_setup_cy82c693,
+		init_chipset:	init_chipset_cy82c693,
+		init_iops:	NULL,
+		init_hwif:	init_hwif_cy82c693,
+		init_dma:	init_dma_cy82c693,
+		channels:	2,
+		autodma:	AUTODMA,
+		enablebits:	{{0x00,0x00,0x00}, {0x00,0x00,0x00}},
+		bootable:	ON_BOARD,
+		extra:		0,
+	},{
+		vendor:		0,
+		device:		0,
+		channels:	0,
+		bootable:	EOL,
+	}
+};
+
+#endif /* CY82C693_H */