powerpc/85xx: mpc8548cds - add 36-bit dts

Create mpc8548cds_36b.dts. Support 36-bit mode.
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8548cds_36b.dts

+/*
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	board_lbc: lbc: localbus@fe0005000 {
+		reg = <0xf 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xff000000 0x01000000
+			  0x1 0x0 0xf 0xf8004000 0x00001000>;
+
+	};
+
+	board_soc: soc: soc8548@fe0000000 {
+		ranges = <0 0xf 0xe0000000 0x100000>;
+	};
+
+	board_pci0: pci0: pci@fe0008000 {
+		reg = <0xf 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+	};
+
+	pci1: pci@fe0009000 {
+		reg = <0xf 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+	};
+
+	pci2: pcie@fe000a000 {
+		reg = <0xf 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	rio: rapidio@fe00c0000 {
+		reg = <0xf 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
+		};
+	};
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"