Merge tag 'arm-realview-dt-for-arm-soc' of...

Merge tag 'arm-realview-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Merge "RealView DeviceTree support for v3.19" from Linus Walleij:

- Device Tree implementation for the ARM RealView boards
- DTS file for the ARM RealView PB1176
- Updates on top of the same DTS file

* tag 'arm-realview-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: add MMCI to the PB1176 DTS
  ARM: realview: add KMIs to the PB1176 DTS
  ARM: realview: add FPGA UART4 to PB1176 DTS
  ARM: realview: add PL022 SSP/SPI block to PB1176 DTS
  ARM: realview: add RTC clocks to device tree
  ARM: realview: add charlcd to PB1176 device tree
  ARM: realview: add PL061 GPIO to the PB1176 DTS
  ARM: realview: move DT GIC to FPGA node
  ARM: realview: add device tree and bindings for PB1176
  ARM: realview: basic device tree implementation
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/arm-boards

@@ -92,3 +92,68 @@ Required nodes:
 - core-module: the root node to the Versatile platforms must have
   a core-module with regs and the compatible strings
   "arm,core-module-versatile", "syscon"
+
+ARM RealView Boards
+-------------------
+The RealView boards cover tailored evaluation boards that are used to explore
+the ARM11 and Cortex A-8 and Cortex A-9 processors.
+
+Required properties (in root node):
+	/* RealView Emulation Baseboard */
+	compatible = "arm,realview-eb";
+	 /* RealView Platform Baseboard for ARM1176JZF-S */
+	compatible = "arm,realview-pb1176";
+	/* RealView Platform Baseboard for ARM11 MPCore */
+	compatible = "arm,realview-pb11mp";
+	/* RealView Platform Baseboard for Cortex A-8 */
+	compatible = "arm,realview-pba8";
+	/* RealView Platform Baseboard Explore for Cortex A-9 */
+	compatible = "arm,realview-pbx";
+
+Required nodes:
+
+- soc: some node of the RealView platforms must be the SoC
+  node that contain the SoC-specific devices, withe the compatible
+  string set to one of these tuples:
+   "arm,realview-eb-soc", "simple-bus"
+   "arm,realview-pb1176-soc", "simple-bus"
+   "arm,realview-pb11mp-soc", "simple-bus"
+   "arm,realview-pba8-soc", "simple-bus"
+   "arm,realview-pbx-soc", "simple-bus"
+
+- syscon: some subnode of the RealView SoC node must be a
+  system controller node pointing to the control registers,
+  with the compatible string set to one of these tuples:
+   "arm,realview-eb-syscon", "syscon"
+   "arm,realview-pb1176-syscon", "syscon"
+   "arm,realview-pb11mp-syscon", "syscon"
+   "arm,realview-pba8-syscon", "syscon"
+   "arm,realview-pbx-syscon", "syscon"
+
+  Required properties for the system controller:
+  - regs: the location and size of the system controller registers,
+    one range of 0x1000 bytes.
+
+Example:
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "ARM RealView PB1176 with device tree";
+	compatible = "arm,realview-pb1176";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb1176-soc", "simple-bus";
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-syscon", "syscon";
+			reg = <0x10000000 0x1000>;
+		};
+
+	};
+};

Documentation/devicetree/bindings/arm/gic.txt

@@ -17,6 +17,7 @@ Main node required properties:
 	"arm,cortex-a7-gic"
 	"arm,arm11mp-gic"
 	"brcm,brahma-b15-gic"
+	"arm,arm1176jzf-devchip-gic"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source.  The type shall be a <u32> and the value shall be 3.

arch/arm/boot/dts/Makefile

@@ -364,6 +364,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3066a-bqcurie2.dtb \
 	rk3188-radxarock.dtb \

arch/arm/boot/dts/arm-realview-pb1176.dts

+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "ARM RealView PB1176";
+	compatible = "arm,realview-pb1176";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb1176_serial0;
+		serial1 = &pb1176_serial1;
+		serial2 = &pb1176_serial2;
+		serial3 = &pb1176_serial3;
+		serial4 = &fpga_serial;
+	};
+
+	memory {
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb1176-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pb1176-syscon", "syscon";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+		};
+
+		/* Primary DevChip GIC synthesized with the CPU */
+		intc_dc1176: interrupt-controller@10120000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10121000 0x1000>,
+			      <0x10120000 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,l220-cache";
+			reg = <0x10110000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s).
+			 */
+			arm,override-auxreg;
+			cache-size = <131072>; // 128kB
+			cache-sets = <512>;
+			cache-line-size = <32>;
+		};
+
+		pmu {
+			compatible = "arm,arm1176-pmu";
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer01: timer@10104000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10104000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10105000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10105000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		pb1176_rtc: rtc@10108000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10108000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_gpio0: gpio@1010a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x1010a000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_ssp: ssp@1010b000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1010b000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		pb1176_serial0: serial@1010c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010c000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial1: serial@1010d000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010d000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial2: serial@1010e000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010e000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial3: serial@1010f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010f000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+
+	/* These peripherals are inside the FPGA rather than the DevChip */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		fpga_mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
+					<0 2 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		fpga_kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_serial: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* This GIC on the board is cascaded off the DevChip GIC */
+		intc_fpga1176: interrupt-controller@10040000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		fpga_gpio0: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_gpio1: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+
+	};
+};

arch/arm/mach-realview/Kconfig

 menu "RealView platform type"
 	depends on ARCH_REALVIEW
 
+config REALVIEW_DT
+	bool "Support RealView(R) Device Tree based boot"
+	select ARM_GIC
+	select MFD_SYSCON
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_REALVIEW
+	select USE_OF
+	help
+	  Include support for booting the ARM(R) RealView(R) evaluation
+	  boards using a device tree machine description.
+
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC

arch/arm/mach-realview/Makefile

@@ -3,6 +3,7 @@
 #
 
 obj-y					:= core.o
+obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o

arch/arm/mach-realview/realview-dt.c

+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "core.h"
+
+static const char *realview_dt_platform_compat[] __initconst = {
+	"arm,realview-eb",
+	"arm,realview-pb1176",
+	"arm,realview-pb11mp",
+	"arm,realview-pba8",
+	"arm,realview-pbx",
+	NULL,
+};
+
+DT_MACHINE_START(REALVIEW_DT, "ARM RealView Machine (Device Tree Support)")
+#ifdef CONFIG_ZONE_DMA
+	.dma_zone_size	= SZ_256M,
+#endif
+	.dt_compat	= realview_dt_platform_compat,
+	.l2c_aux_val = 0x0,
+	.l2c_aux_mask = ~0x0,
+MACHINE_END

drivers/irqchip/irq-gic.c

@@ -1041,6 +1041,8 @@ gic_of_init(struct device_node *node, struct device_node *parent)
 	return 0;
 }
 IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init);
+IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init);
+IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init);
 IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
 IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
 IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);