selftests: Add ipv4 udp tests to fcnal-test

Add udp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.udp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/net/fcnal-test.sh

@@ -1022,6 +1022,384 @@ ipv4_tcp()
 	ipv4_tcp_vrf
 }
 
+################################################################################
+# IPv4 UDP
+
+ipv4_udp_novrf()
+{
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		run_cmd nettest -D -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -D -r ${a}
+	log_test_addr ${a} $? 0 "Device server"
+
+	#
+	# client
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client"
+
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client, device bind"
+
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client, device send via cmsg"
+
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server, unbound client"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -0 ${a} -1 ${a}
+		log_test_addr ${a} $? 0 "Global server, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -r ${a}
+	log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since address is out of device scope"
+		run_cmd nettest -s -D -d ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+	log_start
+	run_cmd nettest -s -D &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -C -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
+
+	log_start
+	run_cmd nettest -s -D &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -S -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection"
+
+	# IPv4 with device bind has really weird behavior - it overrides the
+	# fib lookup, generates an rtable and tries to send the packet. This
+	# causes failures for local traffic at different places
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail since addresses on loopback are out of device scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 2 "Global server, device client, local connection"
+
+		log_start
+		show_hint "Should fail since addresses on loopback are out of device scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C
+		log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
+
+		log_start
+		show_hint "Should fail since addresses on loopback are out of device scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S
+		log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -D -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local conn"
+
+	log_start
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 2 "No server, device client, local conn"
+}
+
+ipv4_udp_vrf()
+{
+	local a
+
+	# disable global server
+	log_subsection "Global server disabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=0
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "Fails because ingress is in a VRF and global server is disabled"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "Global server"
+
+		log_start
+		run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		log_start
+		run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Enslaved device server"
+
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+
+		log_start
+		show_hint "Should fail 'Connection refused' since global server is out of scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 1 "Global server, VRF client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection"
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
+
+	# enable global server
+	log_subsection "Global server enabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=1
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest -D -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+
+		log_start
+		run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		log_start
+		run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Enslaved device server"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# client tests
+	#
+	log_start
+	run_cmd_nsb nettest -D -s &
+	sleep 1
+	run_cmd nettest -d ${VRF} -D -r ${NSB_IP} -1 ${NSA_IP}
+	log_test $? 0 "VRF client"
+
+	log_start
+	run_cmd_nsb nettest -D -s &
+	sleep 1
+	run_cmd nettest -d ${NSA_DEV} -D -r ${NSB_IP} -1 ${NSA_IP}
+	log_test $? 0 "Enslaved device client"
+
+	# negative test - should fail
+	log_start
+	show_hint "Should fail 'Connection refused'"
+	run_cmd nettest -D -d ${VRF} -r ${NSB_IP}
+	log_test $? 1 "No server, VRF client"
+
+	log_start
+	show_hint "Should fail 'Connection refused'"
+	run_cmd nettest -D -d ${NSA_DEV} -r ${NSB_IP}
+	log_test $? 1 "No server, enslaved device client"
+
+	#
+	# local address tests
+	#
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -D -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, device client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
+
+	for a in ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -D -s -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
+	done
+
+	for a in ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -s -D -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+	done
+
+	# negative test - should fail
+	# verifies ECONNREFUSED
+	for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 1 "No server, VRF client, local conn"
+	done
+}
+
+ipv4_udp()
+{
+	which nettest >/dev/null
+	if [ $? -ne 0 ]; then
+		log_error "nettest not found; skipping tests"
+		return
+	fi
+
+	log_section "IPv4/UDP"
+	log_subsection "No VRF"
+
+	setup
+
+	# udp_l3mdev_accept should have no affect without VRF;
+	# run tests with it enabled and disabled to verify
+	log_subsection "udp_l3mdev_accept disabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=0
+	ipv4_udp_novrf
+	log_subsection "udp_l3mdev_accept enabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=1
+	ipv4_udp_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv4_udp_vrf
+}
+
 ################################################################################
 # IPv6
 
@@ -1690,7 +2068,7 @@ EOF
 ################################################################################
 # main
 
-TESTS_IPV4="ipv4_ping ipv4_tcp"
+TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp"
 TESTS_IPV6="ipv6_ping ipv6_tcp"
 PAUSE_ON_FAIL=no
 PAUSE=no
@@ -1731,6 +2109,7 @@ do
 	case $t in
 	ipv4_ping|ping)  ipv4_ping;;
 	ipv4_tcp|tcp)    ipv4_tcp;;
+	ipv4_udp|udp)    ipv4_udp;;
 
 	ipv6_ping|ping6) ipv6_ping;;
 	ipv6_tcp|tcp6)   ipv6_tcp;;