iio: adc: add max11410 adc driver

Adding support for max11410 24-bit, 1.9ksps delta-sigma adc which
has 3 differential reference and 10 differential channel inputs.
Inputs and references can be buffered internally. Inputs can also
be amplified with internal PGA.

Device has four digital filter modes: FIR50/60, FIR50, FIR60 and SINC4.
FIR 50Hz and 60Hz rejections can be enabled/disabled separately.
Digital filter selection affects sampling frequency range so driver
has to consider the configured filter when configuring sampling frequency.
Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20221003105903.229-2-Ibrahim.Tilki@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/adc/Kconfig

@@ -667,6 +667,19 @@ config MAX11205
 	  To compile this driver as a module, choose M here: the module will be
 	  called max11205.
 
+config MAX11410
+	tristate "Analog Devices MAX11410 ADC driver"
+	depends on SPI
+	select REGMAP_SPI
+	select IIO_BUFFER
+	select IIO_TRIGGER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Analog Devices MAX11410 ADCs.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max11410.
+
 config MAX1241
 	tristate "Maxim max1241 ADC driver"
 	depends on SPI_MASTER

drivers/iio/adc/Makefile

@@ -62,6 +62,7 @@ obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX11100) += max11100.o
 obj-$(CONFIG_MAX1118) += max1118.o
 obj-$(CONFIG_MAX11205) += max11205.o
+obj-$(CONFIG_MAX11410) += max11410.o
 obj-$(CONFIG_MAX1241) += max1241.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MAX9611) += max9611.o