net/macb: add scatter-gather hw feature
The scatter-gather feature will allow to enable the Generic Segmentation Offload. Generic Segmentation Offload can be enabled/disabled using ethtool -K DEVNAME gso on|off. e.g: ethtool -K eth0 gso off When enabled, the driver may be provided with socket buffers splitted into many fragments. These fragments need to be queued into the TX ring in reverse order, starting from to the last one down to the first one, to avoid a race condition with the MAC. Especially the 'TX_USED' bit in word 1 of the transmit buffer descriptor of the first fragment should be cleared at the very final step of the queueing algorithm. This will tell the hardware that fragments are ready to be sent. Also since the MAC only update the status word of the first buffer descriptor of the ethernet frame, the queueing algorithm can no longer expect a 'TX_USED' bit to be set by the MAC into the buffer descriptor following the one for last fragment of the skb. This is why the driver sets the 'TX_USED' bit before queueing any fragment, so the end of queue position is well defined for the MAC. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment