Commit a594eeb1 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman Committed by Bartlomiej Zolnierkiewicz

IDE: remove ide=reverse IDE core

This option is obsolete and can be removed safely.

It allows us to remove the pci_get_device_reverse() function from the
PCI core.
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 4b119e21
...@@ -269,8 +269,6 @@ Summary of ide driver parameters for kernel command line ...@@ -269,8 +269,6 @@ Summary of ide driver parameters for kernel command line
ability to bit test for detection is currently ability to bit test for detection is currently
unknown. unknown.
"ide=reverse" : formerly called to pci sub-system, but now local.
"ide=doubler" : probe/support IDE doublers on Amiga "ide=doubler" : probe/support IDE doublers on Amiga
There may be more options than shown -- use the source, Luke! There may be more options than shown -- use the source, Luke!
......
...@@ -763,7 +763,7 @@ and is between 256 and 4096 characters. It is defined in the file ...@@ -763,7 +763,7 @@ and is between 256 and 4096 characters. It is defined in the file
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]] Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
ide= [HW] (E)IDE subsystem ide= [HW] (E)IDE subsystem
Format: ide=nodma or ide=doubler or ide=reverse Format: ide=nodma or ide=doubler
See Documentation/ide/ide.txt. See Documentation/ide/ide.txt.
ide?= [HW] (E)IDE subsystem ide?= [HW] (E)IDE subsystem
......
...@@ -416,12 +416,6 @@ config BLK_DEV_OFFBOARD ...@@ -416,12 +416,6 @@ config BLK_DEV_OFFBOARD
This can improve the usability of some boot managers such as lilo This can improve the usability of some boot managers such as lilo
when booting from a drive on an off-board controller. when booting from a drive on an off-board controller.
If you say Y here, and you actually want to reverse the device scan
order as explained above, you also need to issue the kernel command
line option "ide=reverse". (Try "man bootparam" or see the
documentation of your boot loader (lilo or loadlin) about how to
pass options to the kernel at boot time.)
Note that, if you do this, the order of the hd* devices will be Note that, if you do this, the order of the hd* devices will be
rearranged which may require modification of fstab and other files. rearranged which may require modification of fstab and other files.
...@@ -615,8 +609,7 @@ config BLK_DEV_HPT366 ...@@ -615,8 +609,7 @@ config BLK_DEV_HPT366
reference to device 0x80. The other solution is to say Y to "Boot reference to device 0x80. The other solution is to say Y to "Boot
off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
your mother board has the chipset natively mounted. Regardless one your mother board has the chipset natively mounted. Regardless one
should use the fore mentioned option and call at LILO or include should use the fore mentioned option and call at LILO.
"ide=reverse" in LILO's append-line.
This driver requires dynamic tuning of the chipset during the This driver requires dynamic tuning of the chipset during the
ide-probe at boot. It is reported to support DVD II drives, by the ide-probe at boot. It is reported to support DVD II drives, by the
......
...@@ -88,13 +88,8 @@ static int __init ide_scan_pcibus(void) ...@@ -88,13 +88,8 @@ static int __init ide_scan_pcibus(void)
struct list_head *l, *n; struct list_head *l, *n;
pre_init = 0; pre_init = 0;
if (!ide_scan_direction)
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
ide_scan_pcidev(dev); ide_scan_pcidev(dev);
else
while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
dev)))
ide_scan_pcidev(dev);
/* /*
* Hand the drivers over to the PCI layer now we * Hand the drivers over to the PCI layer now we
......
...@@ -90,10 +90,6 @@ static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ ...@@ -90,10 +90,6 @@ static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */
DEFINE_MUTEX(ide_cfg_mtx); DEFINE_MUTEX(ide_cfg_mtx);
__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
#endif
int noautodma = 0; int noautodma = 0;
#ifdef CONFIG_BLK_DEV_IDEACPI #ifdef CONFIG_BLK_DEV_IDEACPI
...@@ -1217,14 +1213,6 @@ static int __init ide_setup(char *s) ...@@ -1217,14 +1213,6 @@ static int __init ide_setup(char *s)
goto obsolete_option; goto obsolete_option;
} }
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
if (!strcmp(s, "ide=reverse")) {
ide_scan_direction = 1;
printk(" : Enabled support for IDE inverse scan order.\n");
goto obsolete_option;
}
#endif
#ifdef CONFIG_BLK_DEV_IDEACPI #ifdef CONFIG_BLK_DEV_IDEACPI
if (!strcmp(s, "ide=noacpi")) { if (!strcmp(s, "ide=noacpi")) {
//printk(" : Disable IDE ACPI support.\n"); //printk(" : Disable IDE ACPI support.\n");
......
...@@ -990,7 +990,6 @@ extern void do_ide_request(struct request_queue *); ...@@ -990,7 +990,6 @@ extern void do_ide_request(struct request_queue *);
void ide_init_disk(struct gendisk *, ide_drive_t *); void ide_init_disk(struct gendisk *, ide_drive_t *);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
extern int ide_scan_direction;
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name); extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME) #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
#else #else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment