Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "I've been a bit slow gathering these:

   - drm/mst: one mutex leak in a fail path

   - radeon: two oops fixes, one dpm fix

   - i915: one messy set of fixes, where we revert the original fix, and
           pull back the proper set of fixes from -next on top.

   - nouveau: one fix for an illegal buffer placement.

  Doesn't look too bad, hopefully shouldn't be too much more"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/gem: return only valid domain when there's only one
  drm: fix mutex leak in drm_dp_get_mst_branch_device
  drm/amdgpu: add missing dpm check for KV dpm late init
  drm/amdgpu/dpm: don't add pwm attributes if DPM is disabled
  drm/radeon/dpm: don't add pwm attributes if DPM is disabled
  drm/i915: Add primary plane to mask if it's visible
  drm/i915: Move sprite/cursor plane disable to intel_sanitize_crtc()
  drm/i915: Assign hwmode after encoder state readout
  Revert "drm/i915: Add primary plane to mask if it's visible"
  drm/i915: Deny wrapping an userptr into a framebuffer
  drm/i915: Enable DPLL VGA mode before P1/P2 divider write
  drm/i915: Restore lost DPLL register write on gen2-4
  drm/i915: Flush pipecontrol post-sync writes
  drm/i915: Fix kerneldoc for i915_gem_shrink_all

drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c

@@ -294,10 +294,14 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj,
 	struct amdgpu_device *adev = dev_get_drvdata(dev);
 	umode_t effective_mode = attr->mode;
 
-	/* Skip limit attributes if DPM is not enabled */
+	/* Skip attributes if DPM is not enabled */
 	if (!adev->pm.dpm_enabled &&
 	    (attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
-	     attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+	     attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
 		return 0;
 
 	/* Skip fan attributes if fan is not present */

drivers/gpu/drm/amd/amdgpu/kv_dpm.c

@@ -2997,6 +2997,9 @@ static int kv_dpm_late_init(void *handle)
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 	int ret;
 
+	if (!amdgpu_dpm)
+		return 0;
+
 	/* init the sysfs and debugfs files late */
 	ret = amdgpu_pm_sysfs_init(adev);
 	if (ret)

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -1194,17 +1194,18 @@ static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_
 
 		list_for_each_entry(port, &mstb->ports, next) {
 			if (port->port_num == port_num) {
-				if (!port->mstb) {
+				mstb = port->mstb;
+				if (!mstb) {
 					DRM_ERROR("failed to lookup MSTB with lct %d, rad %02x\n", lct, rad[0]);
-					return NULL;
+					goto out;
 				}
 
-				mstb = port->mstb;
 				break;
 			}
 		}
 	}
 	kref_get(&mstb->kref);
+out:
 	mutex_unlock(&mgr->lock);
 	return mstb;
 }

drivers/gpu/drm/i915/i915_gem_shrinker.c

@@ -143,7 +143,7 @@ i915_gem_shrink(struct drm_i915_private *dev_priv,
 }
 
 /**
- * i915_gem_shrink - Shrink buffer object caches completely
+ * i915_gem_shrink_all - Shrink buffer object caches completely
  * @dev_priv: i915 device
  *
  * This is a simple wraper around i915_gem_shrink() to aggressively shrink all

drivers/gpu/drm/i915/i915_gem_userptr.c

@@ -804,7 +804,10 @@ static const struct drm_i915_gem_object_ops i915_gem_userptr_ops = {
  * Also note, that the object created here is not currently a "first class"
  * object, in that several ioctls are banned. These are the CPU access
  * ioctls: mmap(), pwrite and pread. In practice, you are expected to use
- * direct access via your pointer rather than use those ioctls.
+ * direct access via your pointer rather than use those ioctls. Another
+ * restriction is that we do not allow userptr surfaces to be pinned to the
+ * hardware and so we reject any attempt to create a framebuffer out of a
+ * userptr.
  *
  * If you think this is a good interface to use to pass GPU memory between
  * drivers, please use dma-buf instead. In fact, wherever possible use

drivers/gpu/drm/i915/intel_display.c

@@ -1724,6 +1724,15 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
 			   I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
 	}
 
+	/*
+	 * Apparently we need to have VGA mode enabled prior to changing
+	 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
+	 * dividers, even though the register value does change.
+	 */
+	I915_WRITE(reg, 0);
+
+	I915_WRITE(reg, dpll);
+
 	/* Wait for the clocks to stabilize. */
 	POSTING_READ(reg);
 	udelay(150);
@@ -14107,6 +14116,11 @@ static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
 	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
 	struct drm_i915_gem_object *obj = intel_fb->obj;
 
+	if (obj->userptr.mm) {
+		DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
+		return -EINVAL;
+	}
+
 	return drm_gem_handle_create(file, &obj->base, handle);
 }
 
@@ -14897,9 +14911,19 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 	/* restore vblank interrupts to correct state */
 	drm_crtc_vblank_reset(&crtc->base);
 	if (crtc->active) {
+		struct intel_plane *plane;
+
 		drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
 		update_scanline_offset(crtc);
 		drm_crtc_vblank_on(&crtc->base);
+
+		/* Disable everything but the primary plane */
+		for_each_intel_plane_on_crtc(dev, crtc, plane) {
+			if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
+				continue;
+
+			plane->disable_plane(&plane->base, &crtc->base);
+		}
 	}
 
 	/* We need to sanitize the plane -> pipe mapping first because this will
@@ -15067,38 +15091,25 @@ void i915_redisable_vga(struct drm_device *dev)
 	i915_redisable_vga_power_on(dev);
 }
 
-static bool primary_get_hw_state(struct intel_crtc *crtc)
+static bool primary_get_hw_state(struct intel_plane *plane)
 {
-	struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
 
-	return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE);
+	return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
 }
 
-static void readout_plane_state(struct intel_crtc *crtc,
-				struct intel_crtc_state *crtc_state)
+/* FIXME read out full plane state for all planes */
+static void readout_plane_state(struct intel_crtc *crtc)
 {
-	struct intel_plane *p;
-	struct intel_plane_state *plane_state;
-	bool active = crtc_state->base.active;
-
-	for_each_intel_plane(crtc->base.dev, p) {
-		if (crtc->pipe != p->pipe)
-			continue;
+	struct drm_plane *primary = crtc->base.primary;
+	struct intel_plane_state *plane_state =
+		to_intel_plane_state(primary->state);
 
-		plane_state = to_intel_plane_state(p->base.state);
+	plane_state->visible =
+		primary_get_hw_state(to_intel_plane(primary));
 
-		if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
-			plane_state->visible = primary_get_hw_state(crtc);
 	if (plane_state->visible)
-				crtc->base.state->plane_mask |=
-					1 << drm_plane_index(&p->base);
-		} else {
-			if (active)
-				p->disable_plane(&p->base, &crtc->base);
-
-			plane_state->visible = false;
-		}
-	}
+		crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
 }
 
 static void intel_modeset_readout_hw_state(struct drm_device *dev)
@@ -15121,34 +15132,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		crtc->base.state->active = crtc->active;
 		crtc->base.enabled = crtc->active;
 
-		memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
-		if (crtc->base.state->active) {
-			intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
-			intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
-			WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-
-			/*
-			 * The initial mode needs to be set in order to keep
-			 * the atomic core happy. It wants a valid mode if the
-			 * crtc's enabled, so we do the above call.
-			 *
-			 * At this point some state updated by the connectors
-			 * in their ->detect() callback has not run yet, so
-			 * no recalculation can be done yet.
-			 *
-			 * Even if we could do a recalculation and modeset
-			 * right now it would cause a double modeset if
-			 * fbdev or userspace chooses a different initial mode.
-			 *
-			 * If that happens, someone indicated they wanted a
-			 * mode change, which means it's safe to do a full
-			 * recalculation.
-			 */
-			crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
-		}
-
-		crtc->base.hwmode = crtc->config->base.adjusted_mode;
-		readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
+		readout_plane_state(crtc);
 
 		DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
 			      crtc->base.base.id,
@@ -15207,6 +15191,36 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			      connector->base.name,
 			      connector->base.encoder ? "enabled" : "disabled");
 	}
+
+	for_each_intel_crtc(dev, crtc) {
+		crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+		memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+		if (crtc->base.state->active) {
+			intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+			intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+			WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+			/*
+			 * The initial mode needs to be set in order to keep
+			 * the atomic core happy. It wants a valid mode if the
+			 * crtc's enabled, so we do the above call.
+			 *
+			 * At this point some state updated by the connectors
+			 * in their ->detect() callback has not run yet, so
+			 * no recalculation can be done yet.
+			 *
+			 * Even if we could do a recalculation and modeset
+			 * right now it would cause a double modeset if
+			 * fbdev or userspace chooses a different initial mode.
+			 *
+			 * If that happens, someone indicated they wanted a
+			 * mode change, which means it's safe to do a full
+			 * recalculation.
+			 */
+			crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+		}
+	}
 }
 
 /* Scan out the current hw modeset state,

drivers/gpu/drm/i915/intel_lrc.c

@@ -1659,6 +1659,7 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request,
 	if (flush_domains) {
 		flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
 		flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+		flags |= PIPE_CONTROL_FLUSH_ENABLE;
 	}
 
 	if (invalidate_domains) {

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -347,6 +347,7 @@ gen7_render_ring_flush(struct drm_i915_gem_request *req,
 	if (flush_domains) {
 		flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
 		flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+		flags |= PIPE_CONTROL_FLUSH_ENABLE;
 	}
 	if (invalidate_domains) {
 		flags |= PIPE_CONTROL_TLB_INVALIDATE;
@@ -418,6 +419,7 @@ gen8_render_ring_flush(struct drm_i915_gem_request *req,
 	if (flush_domains) {
 		flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
 		flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+		flags |= PIPE_CONTROL_FLUSH_ENABLE;
 	}
 	if (invalidate_domains) {
 		flags |= PIPE_CONTROL_TLB_INVALIDATE;

drivers/gpu/drm/nouveau/nouveau_gem.c

@@ -227,11 +227,12 @@ nouveau_gem_info(struct drm_file *file_priv, struct drm_gem_object *gem,
 	struct nouveau_bo *nvbo = nouveau_gem_object(gem);
 	struct nvkm_vma *vma;
 
-	if (nvbo->bo.mem.mem_type == TTM_PL_TT)
+	if (is_power_of_2(nvbo->valid_domains))
+		rep->domain = nvbo->valid_domains;
+	else if (nvbo->bo.mem.mem_type == TTM_PL_TT)
 		rep->domain = NOUVEAU_GEM_DOMAIN_GART;
 	else
 		rep->domain = NOUVEAU_GEM_DOMAIN_VRAM;
-
 	rep->offset = nvbo->bo.offset;
 	if (cli->vm) {
 		vma = nouveau_bo_vma_find(nvbo, cli->vm);

drivers/gpu/drm/radeon/radeon_pm.c

@@ -717,10 +717,14 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj,
 	struct radeon_device *rdev = dev_get_drvdata(dev);
 	umode_t effective_mode = attr->mode;
 
-	/* Skip limit attributes if DPM is not enabled */
+	/* Skip attributes if DPM is not enabled */
 	if (rdev->pm.pm_method != PM_METHOD_DPM &&
 	    (attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
-	     attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+	     attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+	     attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
 		return 0;
 
 	/* Skip fan attributes if fan is not present */