Merge branches 'acpi-drivers', 'acpi-pm', 'acpi-ec' and 'acpi-video'

* acpi-drivers:
  ACPI / GED: make evged.c explicitly non-modular
  ACPI / amba: Remove CLK_IS_ROOT
  ACPI / APD: Remove CLK_IS_ROOT
  ACPI: implement Generic Event Device

* acpi-pm:
  ACPI / PM: Introduce efi poweroff for HW-full platforms without _S5

* acpi-ec:
  ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis
  ACPI 2.0 / ECDT: Enable correct ECDT initialization order
  ACPI 2.0 / ECDT: Remove early namespace reference from EC
  ACPI 2.0 / ECDT: Split EC_FLAGS_HANDLERS_INSTALLED

* acpi-video:
  ACPI / video: mark acpi_video_get_levels() inline
  Thermal / ACPI / video: add INT3406 thermal driver
  ACPI/video: export acpi_video_get_levels
  video / backlight: remove the backlight_device_registered API
  video / backlight: add two APIs for drivers to use

arch/x86/platform/efi/quirks.c

@@ -373,5 +373,5 @@ bool efi_reboot_required(void)
 
 bool efi_poweroff_required(void)
 {
-	return !!acpi_gbl_reduced_hardware;
+	return acpi_gbl_reduced_hardware || acpi_no_s5;
 }

drivers/acpi/Makefile

@@ -47,6 +47,7 @@ acpi-$(CONFIG_ARM_AMBA)	+= acpi_amba.o
 acpi-y				+= int340x_thermal.o
 acpi-y				+= power.o
 acpi-y				+= event.o
+acpi-$(CONFIG_ACPI_REDUCED_HARDWARE_ONLY) += evged.o
 acpi-y				+= sysfs.o
 acpi-y				+= property.o
 acpi-$(CONFIG_X86)		+= acpi_cmos_rtc.o

drivers/acpi/acpi_amba.c

@@ -35,8 +35,7 @@ static void amba_register_dummy_clk(void)
 	if (amba_dummy_clk)
 		return;
 
-	amba_dummy_clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL,
-						CLK_IS_ROOT, 0);
+	amba_dummy_clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, 0, 0);
 	clk_register_clkdev(amba_dummy_clk, "apb_pclk", NULL);
 }
 

drivers/acpi/acpi_apd.c

@@ -62,8 +62,7 @@ static int acpi_apd_setup(struct apd_private_data *pdata)
 	if (dev_desc->fixed_clk_rate) {
 		clk = clk_register_fixed_rate(&pdata->adev->dev,
 					dev_name(&pdata->adev->dev),
-					NULL, CLK_IS_ROOT,
-					dev_desc->fixed_clk_rate);
+					NULL, 0, dev_desc->fixed_clk_rate);
 		clk_register_clkdev(clk, NULL, dev_name(&pdata->adev->dev));
 		pdata->clk = clk;
 	}

drivers/acpi/acpi_video.c

@@ -191,19 +191,6 @@ struct acpi_video_device_cap {
 	u8 _DDC:1;		/* Return the EDID for this device */
 };
 
-struct acpi_video_brightness_flags {
-	u8 _BCL_no_ac_battery_levels:1;	/* no AC/Battery levels in _BCL */
-	u8 _BCL_reversed:1;		/* _BCL package is in a reversed order */
-	u8 _BQC_use_index:1;		/* _BQC returns an index value */
-};
-
-struct acpi_video_device_brightness {
-	int curr;
-	int count;
-	int *levels;
-	struct acpi_video_brightness_flags flags;
-};
-
 struct acpi_video_device {
 	unsigned long device_id;
 	struct acpi_video_device_flags flags;
@@ -325,7 +312,7 @@ static const struct thermal_cooling_device_ops video_cooling_ops = {
  */
 
 static int
-acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
+acpi_video_device_lcd_query_levels(acpi_handle handle,
 				   union acpi_object **levels)
 {
 	int status;
@@ -335,7 +322,7 @@ acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
 
 	*levels = NULL;
 
-	status = acpi_evaluate_object(device->dev->handle, "_BCL", NULL, &buffer);
+	status = acpi_evaluate_object(handle, "_BCL", NULL, &buffer);
 	if (!ACPI_SUCCESS(status))
 		return status;
 	obj = (union acpi_object *)buffer.pointer;
@@ -766,36 +753,28 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
 	return 0;
 }
 
-
-/*
- *  Arg:
- *	device	: video output device (LCD, CRT, ..)
- *
- *  Return Value:
- *	Maximum brightness level
- *
- *  Allocate and initialize device->brightness.
- */
-
-static int
-acpi_video_init_brightness(struct acpi_video_device *device)
+int acpi_video_get_levels(struct acpi_device *device,
+			  struct acpi_video_device_brightness **dev_br)
 {
 	union acpi_object *obj = NULL;
 	int i, max_level = 0, count = 0, level_ac_battery = 0;
-	unsigned long long level, level_old;
 	union acpi_object *o;
 	struct acpi_video_device_brightness *br = NULL;
-	int result = -EINVAL;
+	int result = 0;
 	u32 value;
 
-	if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device, &obj))) {
+	if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device->handle,
+								&obj))) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available "
 						"LCD brightness level\n"));
+		result = -ENODEV;
 		goto out;
 	}
 
-	if (obj->package.count < 2)
+	if (obj->package.count < 2) {
+		result = -EINVAL;
 		goto out;
+	}
 
 	br = kzalloc(sizeof(*br), GFP_KERNEL);
 	if (!br) {
@@ -861,6 +840,38 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 			    "Found unordered _BCL package"));
 
 	br->count = count;
+	*dev_br = br;
+
+out:
+	kfree(obj);
+	return result;
+out_free:
+	kfree(br);
+	goto out;
+}
+EXPORT_SYMBOL(acpi_video_get_levels);
+
+/*
+ *  Arg:
+ *	device	: video output device (LCD, CRT, ..)
+ *
+ *  Return Value:
+ *	Maximum brightness level
+ *
+ *  Allocate and initialize device->brightness.
+ */
+
+static int
+acpi_video_init_brightness(struct acpi_video_device *device)
+{
+	int i, max_level = 0;
+	unsigned long long level, level_old;
+	struct acpi_video_device_brightness *br = NULL;
+	int result = -EINVAL;
+
+	result = acpi_video_get_levels(device->dev, &br);
+	if (result)
+		return result;
 	device->brightness = br;
 
 	/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
@@ -903,17 +914,13 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 		goto out_free_levels;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "found %d brightness levels\n", count - 2));
-	kfree(obj);
-	return result;
+			  "found %d brightness levels\n", br->count - 2));
+	return 0;
 
 out_free_levels:
 	kfree(br->levels);
-out_free:
 	kfree(br);
-out:
 	device->brightness = NULL;
-	kfree(obj);
 	return result;
 }
 

drivers/acpi/bus.c

@@ -925,11 +925,13 @@ void __init acpi_early_init(void)
 		goto error0;
 	}
 
-	status = acpi_load_tables();
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to load the System Description Tables\n");
-		goto error0;
+	if (acpi_gbl_group_module_level_code) {
+		status = acpi_load_tables();
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX
+			       "Unable to load the System Description Tables\n");
+			goto error0;
+		}
 	}
 
 #ifdef CONFIG_X86
@@ -995,17 +997,10 @@ static int __init acpi_bus_init(void)
 
 	acpi_os_initialize1();
 
-	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
-	if (ACPI_FAILURE(status)) {
-		printk(KERN_ERR PREFIX
-		       "Unable to start the ACPI Interpreter\n");
-		goto error1;
-	}
-
 	/*
 	 * ACPI 2.0 requires the EC driver to be loaded and work before
-	 * the EC device is found in the namespace (i.e. before acpi_initialize_objects()
-	 * is called).
+	 * the EC device is found in the namespace (i.e. before
+	 * acpi_load_tables() is called).
 	 *
 	 * This is accomplished by looking for the ECDT table, and getting
 	 * the EC parameters out of that.
@@ -1013,6 +1008,22 @@ static int __init acpi_bus_init(void)
 	status = acpi_ec_ecdt_probe();
 	/* Ignore result. Not having an ECDT is not fatal. */
 
+	if (!acpi_gbl_group_module_level_code) {
+		status = acpi_load_tables();
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX
+			       "Unable to load the System Description Tables\n");
+			goto error1;
+		}
+	}
+
+	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE);
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_ERR PREFIX
+		       "Unable to start the ACPI Interpreter\n");
+		goto error1;
+	}
+
 	status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX "Unable to initialize ACPI objects\n");

drivers/acpi/ec.c

@@ -105,8 +105,8 @@ enum ec_command {
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_QUERY_GUARDING,	/* Guard for SCI_EVT check */
-	EC_FLAGS_HANDLERS_INSTALLED,	/* Handlers for GPE and
-					 * OpReg are installed */
+	EC_FLAGS_GPE_HANDLER_INSTALLED,	/* GPE handler installed */
+	EC_FLAGS_EC_HANDLER_INSTALLED,	/* OpReg handler installed */
 	EC_FLAGS_STARTED,		/* Driver is started */
 	EC_FLAGS_STOPPED,		/* Driver is stopped */
 	EC_FLAGS_COMMAND_STORM,		/* GPE storms occurred to the
@@ -175,10 +175,9 @@ static void acpi_ec_event_processor(struct work_struct *work);
 struct acpi_ec *boot_ec, *first_ec;
 EXPORT_SYMBOL(first_ec);
 
-static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
-static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
 static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */
 static int EC_FLAGS_QUERY_HANDSHAKE; /* Needs QR_EC issued when SCI_EVT set */
+static int EC_FLAGS_CORRECT_ECDT; /* Needs ECDT port address correction */
 
 /* --------------------------------------------------------------------------
  *                           Logging/Debugging
@@ -367,7 +366,8 @@ static inline void acpi_ec_clear_gpe(struct acpi_ec *ec)
 static void acpi_ec_submit_request(struct acpi_ec *ec)
 {
 	ec->reference_count++;
-	if (ec->reference_count == 1)
+	if (test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags) &&
+	    ec->reference_count == 1)
 		acpi_ec_enable_gpe(ec, true);
 }
 
@@ -376,7 +376,8 @@ static void acpi_ec_complete_request(struct acpi_ec *ec)
 	bool flushed = false;
 
 	ec->reference_count--;
-	if (ec->reference_count == 0)
+	if (test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags) &&
+	    ec->reference_count == 0)
 		acpi_ec_disable_gpe(ec, true);
 	flushed = acpi_ec_flushed(ec);
 	if (flushed)
@@ -1287,52 +1288,64 @@ static int ec_install_handlers(struct acpi_ec *ec)
 {
 	acpi_status status;
 
-	if (test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
-		return 0;
-	status = acpi_install_gpe_raw_handler(NULL, ec->gpe,
-				  ACPI_GPE_EDGE_TRIGGERED,
-				  &acpi_ec_gpe_handler, ec);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
 	acpi_ec_start(ec, false);
-	status = acpi_install_address_space_handler(ec->handle,
-						    ACPI_ADR_SPACE_EC,
-						    &acpi_ec_space_handler,
-						    NULL, ec);
-	if (ACPI_FAILURE(status)) {
-		if (status == AE_NOT_FOUND) {
-			/*
-			 * Maybe OS fails in evaluating the _REG object.
-			 * The AE_NOT_FOUND error will be ignored and OS
-			 * continue to initialize EC.
-			 */
-			pr_err("Fail in evaluating the _REG object"
-				" of EC device. Broken bios is suspected.\n");
-		} else {
-			acpi_ec_stop(ec, false);
-			acpi_remove_gpe_handler(NULL, ec->gpe,
-				&acpi_ec_gpe_handler);
-			return -ENODEV;
+
+	if (!test_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags)) {
+		status = acpi_install_address_space_handler(ec->handle,
+							    ACPI_ADR_SPACE_EC,
+							    &acpi_ec_space_handler,
+							    NULL, ec);
+		if (ACPI_FAILURE(status)) {
+			if (status == AE_NOT_FOUND) {
+				/*
+				 * Maybe OS fails in evaluating the _REG
+				 * object. The AE_NOT_FOUND error will be
+				 * ignored and OS * continue to initialize
+				 * EC.
+				 */
+				pr_err("Fail in evaluating the _REG object"
+					" of EC device. Broken bios is suspected.\n");
+			} else {
+				acpi_ec_stop(ec, false);
+				return -ENODEV;
+			}
+		}
+		set_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags);
+	}
+
+	if (!test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags)) {
+		status = acpi_install_gpe_raw_handler(NULL, ec->gpe,
+					  ACPI_GPE_EDGE_TRIGGERED,
+					  &acpi_ec_gpe_handler, ec);
+		/* This is not fatal as we can poll EC events */
+		if (ACPI_SUCCESS(status)) {
+			set_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags);
+			if (test_bit(EC_FLAGS_STARTED, &ec->flags) &&
+			    ec->reference_count >= 1)
+				acpi_ec_enable_gpe(ec, true);
 		}
 	}
 
-	set_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
 	return 0;
 }
 
 static void ec_remove_handlers(struct acpi_ec *ec)
 {
-	if (!test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
-		return;
 	acpi_ec_stop(ec, false);
-	if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
-				ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
-		pr_err("failed to remove space handler\n");
-	if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
-				&acpi_ec_gpe_handler)))
-		pr_err("failed to remove gpe handler\n");
-	clear_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
+
+	if (test_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags)) {
+		if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
+					ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
+			pr_err("failed to remove space handler\n");
+		clear_bit(EC_FLAGS_EC_HANDLER_INSTALLED, &ec->flags);
+	}
+
+	if (test_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags)) {
+		if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
+					&acpi_ec_gpe_handler)))
+			pr_err("failed to remove gpe handler\n");
+		clear_bit(EC_FLAGS_GPE_HANDLER_INSTALLED, &ec->flags);
+	}
 }
 
 static int acpi_ec_add(struct acpi_device *device)
@@ -1344,11 +1357,12 @@ static int acpi_ec_add(struct acpi_device *device)
 	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
 
 	/* Check for boot EC */
-	if (boot_ec &&
-	    (boot_ec->handle == device->handle ||
-	     boot_ec->handle == ACPI_ROOT_OBJECT)) {
+	if (boot_ec) {
 		ec = boot_ec;
 		boot_ec = NULL;
+		ec_remove_handlers(ec);
+		if (first_ec == ec)
+			first_ec = NULL;
 	} else {
 		ec = make_acpi_ec();
 		if (!ec)
@@ -1434,7 +1448,7 @@ ec_parse_io_ports(struct acpi_resource *resource, void *context)
 
 int __init acpi_boot_ec_enable(void)
 {
-	if (!boot_ec || test_bit(EC_FLAGS_HANDLERS_INSTALLED, &boot_ec->flags))
+	if (!boot_ec)
 		return 0;
 	if (!ec_install_handlers(boot_ec)) {
 		first_ec = boot_ec;
@@ -1448,20 +1462,6 @@ static const struct acpi_device_id ec_device_ids[] = {
 	{"", 0},
 };
 
-/* Some BIOS do not survive early DSDT scan, skip it */
-static int ec_skip_dsdt_scan(const struct dmi_system_id *id)
-{
-	EC_FLAGS_SKIP_DSDT_SCAN = 1;
-	return 0;
-}
-
-/* ASUStek often supplies us with broken ECDT, validate it */
-static int ec_validate_ecdt(const struct dmi_system_id *id)
-{
-	EC_FLAGS_VALIDATE_ECDT = 1;
-	return 0;
-}
-
 #if 0
 /*
  * Some EC firmware variations refuses to respond QR_EC when SCI_EVT is not
@@ -1503,30 +1503,29 @@ static int ec_clear_on_resume(const struct dmi_system_id *id)
 	return 0;
 }
 
+static int ec_correct_ecdt(const struct dmi_system_id *id)
+{
+	pr_debug("Detected system needing ECDT address correction.\n");
+	EC_FLAGS_CORRECT_ECDT = 1;
+	return 0;
+}
+
 static struct dmi_system_id ec_dmi_table[] __initdata = {
 	{
-	ec_skip_dsdt_scan, "Compal JFL92", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
-	DMI_MATCH(DMI_BOARD_NAME, "JFL92") }, NULL},
+	ec_correct_ecdt, "Asus L4R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
+	DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
 	{
-	ec_validate_ecdt, "MSI MS-171F", {
+	ec_correct_ecdt, "Asus M6R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "0207"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
+	DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
+	{
+	ec_correct_ecdt, "MSI MS-171F", {
 	DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star"),
 	DMI_MATCH(DMI_PRODUCT_NAME, "MS-171F"),}, NULL},
 	{
-	ec_validate_ecdt, "ASUS hardware", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
-	{
-	ec_validate_ecdt, "ASUS hardware", {
-	DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc.") }, NULL},
-	{
-	ec_skip_dsdt_scan, "HP Folio 13", {
-	DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13"),}, NULL},
-	{
-	ec_validate_ecdt, "ASUS hardware", {
-	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer Inc."),
-	DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),}, NULL},
-	{
 	ec_clear_on_resume, "Samsung hardware", {
 	DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL},
 	{},
@@ -1534,8 +1533,8 @@ static struct dmi_system_id ec_dmi_table[] __initdata = {
 
 int __init acpi_ec_ecdt_probe(void)
 {
+	int ret = 0;
 	acpi_status status;
-	struct acpi_ec *saved_ec = NULL;
 	struct acpi_table_ecdt *ecdt_ptr;
 
 	boot_ec = make_acpi_ec();
@@ -1547,67 +1546,45 @@ int __init acpi_ec_ecdt_probe(void)
 	dmi_check_system(ec_dmi_table);
 	status = acpi_get_table(ACPI_SIG_ECDT, 1,
 				(struct acpi_table_header **)&ecdt_ptr);
-	if (ACPI_SUCCESS(status)) {
-		pr_info("EC description table is found, configuring boot EC\n");
-		boot_ec->command_addr = ecdt_ptr->control.address;
-		boot_ec->data_addr = ecdt_ptr->data.address;
-		boot_ec->gpe = ecdt_ptr->gpe;
-		boot_ec->handle = ACPI_ROOT_OBJECT;
-		acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id,
-				&boot_ec->handle);
-		/* Don't trust ECDT, which comes from ASUSTek */
-		if (!EC_FLAGS_VALIDATE_ECDT)
-			goto install;
-		saved_ec = kmemdup(boot_ec, sizeof(struct acpi_ec), GFP_KERNEL);
-		if (!saved_ec)
-			return -ENOMEM;
-	/* fall through */
+	if (ACPI_FAILURE(status)) {
+		ret = -ENODEV;
+		goto error;
 	}
 
-	if (EC_FLAGS_SKIP_DSDT_SCAN) {
-		kfree(saved_ec);
-		return -ENODEV;
+	if (!ecdt_ptr->control.address || !ecdt_ptr->data.address) {
+		/*
+		 * Asus X50GL:
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=11880
+		 */
+		ret = -ENODEV;
+		goto error;
 	}
 
-	/* This workaround is needed only on some broken machines,
-	 * which require early EC, but fail to provide ECDT */
-	pr_debug("Look up EC in DSDT\n");
-	status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
-					boot_ec, NULL);
-	/* Check that acpi_get_devices actually find something */
-	if (ACPI_FAILURE(status) || !boot_ec->handle)
-		goto error;
-	if (saved_ec) {
-		/* try to find good ECDT from ASUSTek */
-		if (saved_ec->command_addr != boot_ec->command_addr ||
-		    saved_ec->data_addr != boot_ec->data_addr ||
-		    saved_ec->gpe != boot_ec->gpe ||
-		    saved_ec->handle != boot_ec->handle)
-			pr_info("ASUSTek keeps feeding us with broken "
-			"ECDT tables, which are very hard to workaround. "
-			"Trying to use DSDT EC info instead. Please send "
-			"output of acpidump to linux-acpi@vger.kernel.org\n");
-		kfree(saved_ec);
-		saved_ec = NULL;
+	pr_info("EC description table is found, configuring boot EC\n");
+	if (EC_FLAGS_CORRECT_ECDT) {
+		/*
+		 * Asus L4R, Asus M6R
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=9399
+		 * MSI MS-171F
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=12461
+		 */
+		boot_ec->command_addr = ecdt_ptr->data.address;
+		boot_ec->data_addr = ecdt_ptr->control.address;
 	} else {
-		/* We really need to limit this workaround, the only ASUS,
-		* which needs it, has fake EC._INI method, so use it as flag.
-		* Keep boot_ec struct as it will be needed soon.
-		*/
-		if (!dmi_name_in_vendors("ASUS") ||
-		    !acpi_has_method(boot_ec->handle, "_INI"))
-			return -ENODEV;
+		boot_ec->command_addr = ecdt_ptr->control.address;
+		boot_ec->data_addr = ecdt_ptr->data.address;
 	}
-install:
-	if (!ec_install_handlers(boot_ec)) {
+	boot_ec->gpe = ecdt_ptr->gpe;
+	boot_ec->handle = ACPI_ROOT_OBJECT;
+	ret = ec_install_handlers(boot_ec);
+	if (!ret)
 		first_ec = boot_ec;
-		return 0;
-	}
 error:
-	kfree(boot_ec);
-	kfree(saved_ec);
-	boot_ec = NULL;
-	return -ENODEV;
+	if (ret) {
+		kfree(boot_ec);
+		boot_ec = NULL;
+	}
+	return ret;
 }
 
 static int param_set_event_clearing(const char *val, struct kernel_param *kp)

drivers/acpi/evged.c

+/*
+ * Generic Event Device for ACPI.
+ *
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Generic Event Device allows platforms to handle interrupts in ACPI
+ * ASL statements. It follows very similar to  _EVT method approach
+ * from GPIO events. All interrupts are listed in _CRS and the handler
+ * is written in _EVT method. Here is an example.
+ *
+ * Device (GED0)
+ * {
+ *
+ *     Name (_HID, "ACPI0013")
+ *     Name (_UID, 0)
+ *     Method (_CRS, 0x0, Serialized)
+ *     {
+ *		Name (RBUF, ResourceTemplate ()
+ *		{
+ *		Interrupt(ResourceConsumer, Edge, ActiveHigh, Shared, , , )
+ *		{123}
+ *		}
+ *     })
+ *
+ *     Method (_EVT, 1) {
+ *             if (Lequal(123, Arg0))
+ *             {
+ *             }
+ *     }
+ * }
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+
+#define MODULE_NAME	"acpi-ged"
+
+struct acpi_ged_event {
+	struct list_head node;
+	struct device *dev;
+	unsigned int gsi;
+	unsigned int irq;
+	acpi_handle handle;
+};
+
+static irqreturn_t acpi_ged_irq_handler(int irq, void *data)
+{
+	struct acpi_ged_event *event = data;
+	acpi_status acpi_ret;
+
+	acpi_ret = acpi_execute_simple_method(event->handle, NULL, event->gsi);
+	if (ACPI_FAILURE(acpi_ret))
+		dev_err_once(event->dev, "IRQ method execution failed\n");
+
+	return IRQ_HANDLED;
+}
+
+static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares,
+					      void *context)
+{
+	struct acpi_ged_event *event;
+	unsigned int irq;
+	unsigned int gsi;
+	unsigned int irqflags = IRQF_ONESHOT;
+	struct device *dev = context;
+	acpi_handle handle = ACPI_HANDLE(dev);
+	acpi_handle evt_handle;
+	struct resource r;
+	struct acpi_resource_irq *p = &ares->data.irq;
+	struct acpi_resource_extended_irq *pext = &ares->data.extended_irq;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_END_TAG)
+		return AE_OK;
+
+	if (!acpi_dev_resource_interrupt(ares, 0, &r)) {
+		dev_err(dev, "unable to parse IRQ resource\n");
+		return AE_ERROR;
+	}
+	if (ares->type == ACPI_RESOURCE_TYPE_IRQ)
+		gsi = p->interrupts[0];
+	else
+		gsi = pext->interrupts[0];
+
+	irq = r.start;
+
+	if (ACPI_FAILURE(acpi_get_handle(handle, "_EVT", &evt_handle))) {
+		dev_err(dev, "cannot locate _EVT method\n");
+		return AE_ERROR;
+	}
+
+	dev_info(dev, "GED listening GSI %u @ IRQ %u\n", gsi, irq);
+
+	event = devm_kzalloc(dev, sizeof(*event), GFP_KERNEL);
+	if (!event)
+		return AE_ERROR;
+
+	event->gsi = gsi;
+	event->dev = dev;
+	event->irq = irq;
+	event->handle = evt_handle;
+
+	if (r.flags & IORESOURCE_IRQ_SHAREABLE)
+		irqflags |= IRQF_SHARED;
+
+	if (devm_request_threaded_irq(dev, irq, NULL, acpi_ged_irq_handler,
+				      irqflags, "ACPI:Ged", event)) {
+		dev_err(dev, "failed to setup event handler for irq %u\n", irq);
+		return AE_ERROR;
+	}
+
+	return AE_OK;
+}
+
+static int ged_probe(struct platform_device *pdev)
+{
+	acpi_status acpi_ret;
+
+	acpi_ret = acpi_walk_resources(ACPI_HANDLE(&pdev->dev), "_CRS",
+				       acpi_ged_request_interrupt, &pdev->dev);
+	if (ACPI_FAILURE(acpi_ret)) {
+		dev_err(&pdev->dev, "unable to parse the _CRS record\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct acpi_device_id ged_acpi_ids[] = {
+	{"ACPI0013"},
+	{},
+};
+
+static struct platform_driver ged_driver = {
+	.probe = ged_probe,
+	.driver = {
+		.name = MODULE_NAME,
+		.acpi_match_table = ACPI_PTR(ged_acpi_ids),
+	},
+};
+builtin_platform_driver(ged_driver);

drivers/acpi/sleep.c

@@ -26,6 +26,11 @@
 #include "internal.h"
 #include "sleep.h"
 
+/*
+ * Some HW-full platforms do not have _S5, so they may need
+ * to leverage efi power off for a shutdown.
+ */
+bool acpi_no_s5;
 static u8 sleep_states[ACPI_S_STATE_COUNT];
 
 static void acpi_sleep_tts_switch(u32 acpi_state)
@@ -882,6 +887,8 @@ int __init acpi_sleep_init(void)
 		sleep_states[ACPI_STATE_S5] = 1;
 		pm_power_off_prepare = acpi_power_off_prepare;
 		pm_power_off = acpi_power_off;
+	} else {
+		acpi_no_s5 = true;
 	}
 
 	supported[0] = 0;

drivers/acpi/video_detect.c

@@ -358,7 +358,7 @@ enum acpi_backlight_type acpi_video_get_backlight_type(void)
 	if (!(video_caps & ACPI_VIDEO_BACKLIGHT))
 		return acpi_backlight_vendor;
 
-	if (acpi_osi_is_win8() && backlight_device_registered(BACKLIGHT_RAW))
+	if (acpi_osi_is_win8() && backlight_device_get_by_type(BACKLIGHT_RAW))
 		return acpi_backlight_native;
 
 	return acpi_backlight_video;

drivers/thermal/Kconfig

@@ -338,31 +338,9 @@ config INTEL_QUARK_DTS_THERMAL
 	  hot & critical. The critical trip point default value is set by
 	  underlying BIOS/Firmware.
 
-config INT340X_THERMAL
-	tristate "ACPI INT340X thermal drivers"
-	depends on X86 && ACPI
-	select THERMAL_GOV_USER_SPACE
-	select ACPI_THERMAL_REL
-	select ACPI_FAN
-	select INTEL_SOC_DTS_IOSF_CORE
-	select THERMAL_WRITABLE_TRIPS
-	help
-	  Newer laptops and tablets that use ACPI may have thermal sensors and
-	  other devices with thermal control capabilities outside the core
-	  CPU/SOC, for thermal safety reasons.
-	  They are exposed for the OS to use via the INT3400 ACPI device object
-	  as the master, and INT3401~INT340B ACPI device objects as the slaves.
-	  Enable this to expose the temperature information and cooling ability
-	  from these objects to userspace via the normal thermal framework.
-	  This means that a wide range of applications and GUI widgets can show
-	  the information to the user or use this information for making
-	  decisions. For example, the Intel Thermal Daemon can use this
-	  information to allow the user to select his laptop to run without
-	  turning on the fans.
-
-config ACPI_THERMAL_REL
-	tristate
-	depends on ACPI
+menu "ACPI INT340X thermal drivers"
+source drivers/thermal/int340x_thermal/Kconfig
+endmenu
 
 config INTEL_PCH_THERMAL
 	tristate "Intel PCH Thermal Reporting Driver"

drivers/thermal/int340x_thermal/Kconfig

+#
+# ACPI INT340x thermal drivers configuration
+#
+
+config INT340X_THERMAL
+	tristate "ACPI INT340X thermal drivers"
+	depends on X86 && ACPI
+	select THERMAL_GOV_USER_SPACE
+	select ACPI_THERMAL_REL
+	select ACPI_FAN
+	select INTEL_SOC_DTS_IOSF_CORE
+	help
+	  Newer laptops and tablets that use ACPI may have thermal sensors and
+	  other devices with thermal control capabilities outside the core
+	  CPU/SOC, for thermal safety reasons.
+	  They are exposed for the OS to use via the INT3400 ACPI device object
+	  as the master, and INT3401~INT340B ACPI device objects as the slaves.
+	  Enable this to expose the temperature information and cooling ability
+	  from these objects to userspace via the normal thermal framework.
+	  This means that a wide range of applications and GUI widgets can show
+	  the information to the user or use this information for making
+	  decisions. For example, the Intel Thermal Daemon can use this
+	  information to allow the user to select his laptop to run without
+	  turning on the fans.
+
+config ACPI_THERMAL_REL
+	tristate
+	depends on ACPI
+
+if INT340X_THERMAL
+
+config INT3406_THERMAL
+	tristate "ACPI INT3406 display thermal driver"
+	depends on ACPI_VIDEO
+	help
+	  The display thermal device represents the LED/LCD display panel
+	  that may or may not include touch support. The main function of
+	  the display thermal device is to allow control of the display
+	  brightness in order to address a thermal condition or to reduce
+	  power consumed by display device.
+
+endif

drivers/thermal/int340x_thermal/Makefile

@@ -3,4 +3,5 @@ obj-$(CONFIG_INT340X_THERMAL)	+= int340x_thermal_zone.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3402_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= int3403_thermal.o
 obj-$(CONFIG_INT340X_THERMAL)	+= processor_thermal_device.o
+obj-$(CONFIG_INT3406_THERMAL)	+= int3406_thermal.o
 obj-$(CONFIG_ACPI_THERMAL_REL)	+= acpi_thermal_rel.o

drivers/thermal/int340x_thermal/int3406_thermal.c

+/*
+ * INT3406 thermal driver for display participant device
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Authors: Aaron Lu <aaron.lu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/backlight.h>
+#include <linux/thermal.h>
+#include <acpi/video.h>
+
+#define INT3406_BRIGHTNESS_LIMITS_CHANGED	0x80
+
+struct int3406_thermal_data {
+	int upper_limit;
+	int upper_limit_index;
+	int lower_limit;
+	int lower_limit_index;
+	acpi_handle handle;
+	struct acpi_video_device_brightness *br;
+	struct backlight_device *raw_bd;
+	struct thermal_cooling_device *cooling_dev;
+};
+
+static int int3406_thermal_to_raw(int level, struct int3406_thermal_data *d)
+{
+	int max_level = d->br->levels[d->br->count - 1];
+	int raw_max = d->raw_bd->props.max_brightness;
+
+	return level * raw_max / max_level;
+}
+
+static int int3406_thermal_to_acpi(int level, struct int3406_thermal_data *d)
+{
+	int raw_max = d->raw_bd->props.max_brightness;
+	int max_level = d->br->levels[d->br->count - 1];
+
+	return level * max_level / raw_max;
+}
+
+static int
+int3406_thermal_get_max_state(struct thermal_cooling_device *cooling_dev,
+			      unsigned long *state)
+{
+	struct int3406_thermal_data *d = cooling_dev->devdata;
+	int index = d->lower_limit_index ? d->lower_limit_index : 2;
+
+	*state = d->br->count - 1 - index;
+	return 0;
+}
+
+static int
+int3406_thermal_set_cur_state(struct thermal_cooling_device *cooling_dev,
+			      unsigned long state)
+{
+	struct int3406_thermal_data *d = cooling_dev->devdata;
+	int level, raw_level;
+
+	if (state > d->br->count - 3)
+		return -EINVAL;
+
+	state = d->br->count - 1 - state;
+	level = d->br->levels[state];
+
+	if ((d->upper_limit && level > d->upper_limit) ||
+	    (d->lower_limit && level < d->lower_limit))
+		return -EINVAL;
+
+	raw_level = int3406_thermal_to_raw(level, d);
+	return backlight_device_set_brightness(d->raw_bd, raw_level);
+}
+
+static int
+int3406_thermal_get_cur_state(struct thermal_cooling_device *cooling_dev,
+			      unsigned long *state)
+{
+	struct int3406_thermal_data *d = cooling_dev->devdata;
+	int raw_level, level, i;
+	int *levels = d->br->levels;
+
+	raw_level = d->raw_bd->props.brightness;
+	level = int3406_thermal_to_acpi(raw_level, d);
+
+	/*
+	 * There is no 1:1 mapping between the firmware interface level with the
+	 * raw interface level, we will have to find one that is close enough.
+	 */
+	for (i = 2; i < d->br->count; i++) {
+		if (level < levels[i]) {
+			if (i == 2)
+				break;
+			if ((level - levels[i - 1]) < (levels[i] - level))
+				i--;
+			break;
+		}
+	}
+
+	*state = d->br->count - 1 - i;
+	return 0;
+}
+
+static const struct thermal_cooling_device_ops video_cooling_ops = {
+	.get_max_state = int3406_thermal_get_max_state,
+	.get_cur_state = int3406_thermal_get_cur_state,
+	.set_cur_state = int3406_thermal_set_cur_state,
+};
+
+static int int3406_thermal_get_index(int *array, int nr, int value)
+{
+	int i;
+
+	for (i = 0; i < nr; i++) {
+		if (array[i] == value)
+			break;
+	}
+	return i == nr ? -ENOENT : i;
+}
+
+static void int3406_thermal_get_limit(struct int3406_thermal_data *d)
+{
+	acpi_status status;
+	unsigned long long lower_limit, upper_limit;
+	int index;
+
+	status = acpi_evaluate_integer(d->handle, "DDDL", NULL, &lower_limit);
+	if (ACPI_SUCCESS(status)) {
+		index = int3406_thermal_get_index(d->br->levels, d->br->count,
+						  lower_limit);
+		if (index > 0) {
+			d->lower_limit = (int)lower_limit;
+			d->lower_limit_index = index;
+		}
+	}
+
+	status = acpi_evaluate_integer(d->handle, "DDPC", NULL, &upper_limit);
+	if (ACPI_SUCCESS(status)) {
+		index = int3406_thermal_get_index(d->br->levels, d->br->count,
+						  upper_limit);
+		if (index > 0) {
+			d->upper_limit = (int)upper_limit;
+			d->upper_limit_index = index;
+		}
+	}
+}
+
+static void int3406_notify(acpi_handle handle, u32 event, void *data)
+{
+	if (event == INT3406_BRIGHTNESS_LIMITS_CHANGED)
+		int3406_thermal_get_limit(data);
+}
+
+static int int3406_thermal_probe(struct platform_device *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	struct int3406_thermal_data *d;
+	struct backlight_device *bd;
+	int ret;
+
+	if (!ACPI_HANDLE(&pdev->dev))
+		return -ENODEV;
+
+	d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+	d->handle = ACPI_HANDLE(&pdev->dev);
+
+	bd = backlight_device_get_by_type(BACKLIGHT_RAW);
+	if (!bd)
+		return -ENODEV;
+	d->raw_bd = bd;
+
+	ret = acpi_video_get_levels(ACPI_COMPANION(&pdev->dev), &d->br);
+	if (ret)
+		return ret;
+
+	int3406_thermal_get_limit(d);
+
+	d->cooling_dev = thermal_cooling_device_register(acpi_device_bid(adev),
+							 d, &video_cooling_ops);
+	if (IS_ERR(d->cooling_dev))
+		goto err;
+
+	ret = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY,
+					  int3406_notify, d);
+	if (ret)
+		goto err_cdev;
+
+	platform_set_drvdata(pdev, d);
+
+	return 0;
+
+err_cdev:
+	thermal_cooling_device_unregister(d->cooling_dev);
+err:
+	kfree(d->br);
+	return -ENODEV;
+}
+
+static int int3406_thermal_remove(struct platform_device *pdev)
+{
+	struct int3406_thermal_data *d = platform_get_drvdata(pdev);
+
+	thermal_cooling_device_unregister(d->cooling_dev);
+	kfree(d->br);
+	return 0;
+}
+
+static const struct acpi_device_id int3406_thermal_match[] = {
+	{"INT3406", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, int3406_thermal_match);
+
+static struct platform_driver int3406_thermal_driver = {
+	.probe = int3406_thermal_probe,
+	.remove = int3406_thermal_remove,
+	.driver = {
+		   .name = "int3406 thermal",
+		   .owner = THIS_MODULE,
+		   .acpi_match_table = int3406_thermal_match,
+		   },
+};
+
+module_platform_driver(int3406_thermal_driver);
+
+MODULE_DESCRIPTION("INT3406 Thermal driver");
+MODULE_LICENSE("GPL v2");

drivers/video/backlight/backlight.c

@@ -164,18 +164,10 @@ static ssize_t brightness_show(struct device *dev,
 	return sprintf(buf, "%d\n", bd->props.brightness);
 }
 
-static ssize_t brightness_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
+int backlight_device_set_brightness(struct backlight_device *bd,
+				    unsigned long brightness)
 {
-	int rc;
-	struct backlight_device *bd = to_backlight_device(dev);
-	unsigned long brightness;
-
-	rc = kstrtoul(buf, 0, &brightness);
-	if (rc)
-		return rc;
-
-	rc = -ENXIO;
+	int rc = -ENXIO;
 
 	mutex_lock(&bd->ops_lock);
 	if (bd->ops) {
@@ -185,7 +177,7 @@ static ssize_t brightness_store(struct device *dev,
 			pr_debug("set brightness to %lu\n", brightness);
 			bd->props.brightness = brightness;
 			backlight_update_status(bd);
-			rc = count;
+			rc = 0;
 		}
 	}
 	mutex_unlock(&bd->ops_lock);
@@ -194,6 +186,23 @@ static ssize_t brightness_store(struct device *dev,
 
 	return rc;
 }
+EXPORT_SYMBOL(backlight_device_set_brightness);
+
+static ssize_t brightness_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int rc;
+	struct backlight_device *bd = to_backlight_device(dev);
+	unsigned long brightness;
+
+	rc = kstrtoul(buf, 0, &brightness);
+	if (rc)
+		return rc;
+
+	rc = backlight_device_set_brightness(bd, brightness);
+
+	return rc ? rc : count;
+}
 static DEVICE_ATTR_RW(brightness);
 
 static ssize_t type_show(struct device *dev, struct device_attribute *attr,
@@ -380,7 +389,7 @@ struct backlight_device *backlight_device_register(const char *name,
 }
 EXPORT_SYMBOL(backlight_device_register);
 
-bool backlight_device_registered(enum backlight_type type)
+struct backlight_device *backlight_device_get_by_type(enum backlight_type type)
 {
 	bool found = false;
 	struct backlight_device *bd;
@@ -394,9 +403,9 @@ bool backlight_device_registered(enum backlight_type type)
 	}
 	mutex_unlock(&backlight_dev_list_mutex);
 
-	return found;
+	return found ? bd : NULL;
 }
-EXPORT_SYMBOL(backlight_device_registered);
+EXPORT_SYMBOL(backlight_device_get_by_type);
 
 /**
  * backlight_device_unregister - unregisters a backlight device object.

include/acpi/acpixf.h

@@ -192,7 +192,7 @@ ACPI_INIT_GLOBAL(u8, acpi_gbl_do_not_use_xsdt, FALSE);
 /*
  * Optionally support group module level code.
  */
-ACPI_INIT_GLOBAL(u8, acpi_gbl_group_module_level_code, TRUE);
+ACPI_INIT_GLOBAL(u8, acpi_gbl_group_module_level_code, FALSE);
 
 /*
  * Optionally use 32-bit FADT addresses if and when there is a conflict

include/acpi/video.h

@@ -4,6 +4,19 @@
 #include <linux/errno.h> /* for ENODEV */
 #include <linux/types.h> /* for bool */
 
+struct acpi_video_brightness_flags {
+	u8 _BCL_no_ac_battery_levels:1;	/* no AC/Battery levels in _BCL */
+	u8 _BCL_reversed:1;		/* _BCL package is in a reversed order */
+	u8 _BQC_use_index:1;		/* _BQC returns an index value */
+};
+
+struct acpi_video_device_brightness {
+	int curr;
+	int count;
+	int *levels;
+	struct acpi_video_brightness_flags flags;
+};
+
 struct acpi_device;
 
 #define ACPI_VIDEO_CLASS	"video"
@@ -37,6 +50,8 @@ extern void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type);
  * may change over time and should not be cached.
  */
 extern bool acpi_video_handles_brightness_key_presses(void);
+extern int acpi_video_get_levels(struct acpi_device *device,
+				 struct acpi_video_device_brightness **dev_br);
 #else
 static inline int acpi_video_register(void) { return 0; }
 static inline void acpi_video_unregister(void) { return; }
@@ -56,6 +71,11 @@ static inline bool acpi_video_handles_brightness_key_presses(void)
 {
 	return false;
 }
+static inline int acpi_video_get_levels(struct acpi_device *device,
+			struct acpi_video_device_brightness **dev_br)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif

include/linux/acpi.h

@@ -278,6 +278,7 @@ void acpi_irq_stats_init(void);
 extern u32 acpi_irq_handled;
 extern u32 acpi_irq_not_handled;
 extern unsigned int acpi_sci_irq;
+extern bool acpi_no_s5;
 #define INVALID_ACPI_IRQ	((unsigned)-1)
 static inline bool acpi_sci_irq_valid(void)
 {

include/linux/backlight.h

@@ -141,9 +141,10 @@ extern void devm_backlight_device_unregister(struct device *dev,
 					struct backlight_device *bd);
 extern void backlight_force_update(struct backlight_device *bd,
 				   enum backlight_update_reason reason);
-extern bool backlight_device_registered(enum backlight_type type);
 extern int backlight_register_notifier(struct notifier_block *nb);
 extern int backlight_unregister_notifier(struct notifier_block *nb);
+extern struct backlight_device *backlight_device_get_by_type(enum backlight_type type);
+extern int backlight_device_set_brightness(struct backlight_device *bd, unsigned long brightness);
 
 #define to_backlight_device(obj) container_of(obj, struct backlight_device, dev)