Skip to content

L
linux
Commit a834911d authored by Neil Armstrong's avatar Neil Armstrong Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: sm8650: add initial SM8650 QRD dts 

Add initial QRD (Qualcomm Reference Device) DT, it supports
boot to shell with buttons, leds and USB peripheral.
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-5-b25fb781da52@linaro.orgSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 6fbdb3c1
Hide whitespace changes
Inline Side-by-side
Showing with 532 additions and 0 deletions
arch/arm64/boot/dts/qcom/Makefile
View file @ a834911d
......@@ -236,3 +236,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
arch/arm64/boot/dts/qcom/sm8650-qrd.dts 0 → 100644
View file @ a834911d
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8650.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 8
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d_a.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SM8650 QRD";
compatible = "qcom,sm8650-qrd", "qcom,sm8650";
aliases {
serial0 = &uart15;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&volume_up_n>;
pinctrl-names = "default";
key-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
vdd-bob1-supply = <&vph_pwr>;
vdd-bob2-supply = <&vph_pwr>;
vdd-l2-l13-l14-supply = <&vreg_bob1>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-l5-l16-supply = <&vreg_bob1>;
vdd-l6-l7-supply = <&vreg_bob1>;
vdd-l8-l9-supply = <&vreg_bob1>;
vdd-l11-supply = <&vreg_s1c_1p2>;
vdd-l12-supply = <&vreg_s6c_1p8>;
vdd-l15-supply = <&vreg_s6c_1p8>;
vdd-l17-supply = <&vreg_bob2>;
qcom,pmic-id = "b";
vreg_bob1: bob1 {
regulator-name = "vreg_bob1";
regulator-min-microvolt = <3296000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob2: bob2 {
regulator-name = "vreg_bob2";
regulator-min-microvolt = <2720000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p0: ldo2 {
regulator-name = "vreg_l2b_3p0";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5b_3p1: ldo5 {
regulator-name = "vreg_l5b_3p1";
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p8: ldo6 {
regulator-name = "vreg_l6b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_1p8: ldo7 {
regulator-name = "vreg_l7b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_1p8: ldo8 {
regulator-name = "vreg_l8b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p2: ldo11 {
regulator-name = "vreg_l11b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_1p8: ldo12 {
regulator-name = "vreg_l12b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_3p0: ldo13 {
regulator-name = "vreg_l13b_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p2: ldo14 {
regulator-name = "vreg_l14b_3p2";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_1p8: ldo15 {
regulator-name = "vreg_l15b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_2p8: ldo16 {
regulator-name = "vreg_l16b_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_2p5: ldo17 {
regulator-name = "vreg_l17b_2p5";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s1c_1p2>;
vdd-l2-supply = <&vreg_s1c_1p2>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
qcom,pmic-id = "c";
vreg_s1c_1p2: smps1 {
regulator-name = "vreg_s1c_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1348000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s2c_0p8: smps2 {
regulator-name = "vreg_s2c_0p8";
regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1036000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s3c_0p9: smps3 {
regulator-name = "vreg_s3c_0p9";
regulator-min-microvolt = <976000>;
regulator-max-microvolt = <1064000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s4c_1p2: smps4 {
regulator-name = "vreg_s4c_1p2";
regulator-min-microvolt = <1224000>;
regulator-max-microvolt = <1280000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5c_0p7: smps5 {
regulator-name = "vreg_s5c_0p7";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6c_1p8: smps6 {
regulator-name = "vreg_s6c_1p8";
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p2: ldo1 {
regulator-name = "vreg_l1c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_1p2: ldo3 {
regulator-name = "vreg_l3c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "d";
vreg_l1d_0p88: ldo1 {
regulator-name = "vreg_l1d_0p88";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l3-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "e";
vreg_l3e_0p9: ldo3 {
regulator-name = "vreg_l3e_0p9";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pm8550vs-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
vdd-l3-supply = <&vreg_s3c_0p9>;
qcom,pmic-id = "g";
vreg_l1g_0p91: ldo1 {
regulator-name = "vreg_l1g_0p91";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3g_0p91: ldo3 {
regulator-name = "vreg_l3g_0p91";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-5 {
compatible = "qcom,pm8550ve-rpmh-regulators";
vdd-l1-supply = <&vreg_s3c_0p9>;
vdd-l2-supply = <&vreg_s3c_0p9>;
vdd-l3-supply = <&vreg_s1c_1p2>;
vdd-s4-supply = <&vph_pwr>;
qcom,pmic-id = "i";
vreg_s4i_0p85: smps4 {
regulator-name = "vreg_s4i_0p85";
regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1004000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1i_0p88: ldo1 {
regulator-name = "vreg_l1i_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2i_0p88: ldo2 {
regulator-name = "vreg_l2i_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3i_1p2: ldo3 {
regulator-name = "vreg_l3i_0p91";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm8550_flash {
status = "okay";
led-0 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_YELLOW>;
led-sources = <1>, <4>;
led-max-microamp = <500000>;
flash-max-microamp = <2000000>;
flash-max-timeout-us = <1280000>;
function-enumerator = <0>;
};
led-1 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
led-sources = <2>, <3>;
led-max-microamp = <500000>;
flash-max-microamp = <2000000>;
flash-max-timeout-us = <1280000>;
function-enumerator = <1>;
};
};
&pm8550_gpios {
volume_up_n: volume-up-n-state {
pins = "gpio6";
function = "normal";
bias-pull-up;
input-enable;
power-source = <1>;
};
};
&pm8550_pwm {
status = "okay";
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@1 {
reg = <1>;
color = <LED_COLOR_ID_RED>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_BLUE>;
};
};
};
&pm8550b_eusb2_repeater {
vdd18-supply = <&vreg_l15b_1p8>;
vdd3-supply = <&vreg_l5b_3p1>;
};
&pmk8550_rtc {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
&tlmm {
/* Reserved I/Os for NFC */
gpio-reserved-ranges = <32 8>;
};
&uart15 {
status = "okay";
};
/*
* DPAUX -> WCD9395 -> USB_SBU -> USB-C
* eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
* USB SS -> NB7VPQ904MMUTWG -> USB-C
*/
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&usb_1_hsphy {
vdd-supply = <&vreg_l1i_0p88>;
vdda12-supply = <&vreg_l3i_1p2>;
phys = <&pm8550b_eusb2_repeater>;
status = "okay";
};
&usb_dp_qmpphy {
vdda-phy-supply = <&vreg_l3i_1p2>;
vdda-pll-supply = <&vreg_l3g_0p91>;
status = "okay";
};
&xo_board {
clock-frequency = <76800000>;
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7