Commit a85821fc authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits)
  HID: usbhid: initialize interface pointers early enough
  HID: extend mask for BUTTON usage page
  HID: hid-ntrig: Single touch mode tap
  HID: hid-ntrig: multitouch cleanup and fix
  HID: n-trig: remove unnecessary tool switching
  HID: hid-ntrig add multi input quirk and clean up
  HID: usbhid: introduce timeout for stuck ctrl/out URBs
  HID: magicmouse: coding style and probe failure fixes
  HID: remove MODULE_VERSION from new drivers
  HID: fix up Kconfig entry for MagicMouse
  HID: add a device driver for the Apple Magic Mouse.
  HID: Export hid_register_report
  HID: Support for MosArt multitouch panel
  HID: add pressure support for the Stantum multitouch panel
  HID: fixed bug in single-touch emulation on the stantum panel
  HID: fix typo in error message
  HID: add mapping for "AL Network Chat" usage
  HID: use multi input quirk for TouchPack touchscreen
  HID: make full-fledged hid-bus drivers properly selectable
  HID: make Wacom modesetting failures non-fatal
  ...
parents 10df38ca 14ef2b0c
......@@ -55,6 +55,12 @@ source "drivers/hid/usbhid/Kconfig"
menu "Special HID drivers"
depends on HID
config HID_3M_PCT
tristate "3M PCT"
depends on USB_HID
---help---
Support for 3M PCT touch screens.
config HID_A4TECH
tristate "A4 tech" if EMBEDDED
depends on USB_HID
......@@ -183,6 +189,23 @@ config LOGIRUMBLEPAD2_FF
Say Y here if you want to enable force feedback support for Logitech
Rumblepad 2 devices.
config LOGIG940_FF
bool "Logitech Flight System G940 force feedback support"
depends on HID_LOGITECH
select INPUT_FF_MEMLESS
help
Say Y here if you want to enable force feedback support for Logitech
Flight System G940 devices.
config HID_MAGICMOUSE
tristate "Apple MagicMouse multi-touch support"
depends on BT_HIDP
---help---
Support for the Apple Magic Mouse multi-touch.
Say Y here if you want support for the multi-touch features of the
Apple Wireless "Magic" Mouse.
config HID_MICROSOFT
tristate "Microsoft" if EMBEDDED
depends on USB_HID
......@@ -190,6 +213,12 @@ config HID_MICROSOFT
---help---
Support for Microsoft devices that are not fully compliant with HID standard.
config HID_MOSART
tristate "MosArt"
depends on USB_HID
---help---
Support for MosArt dual-touch panels.
config HID_MONTEREY
tristate "Monterey" if EMBEDDED
depends on USB_HID
......@@ -198,12 +227,18 @@ config HID_MONTEREY
Support for Monterey Genius KB29E.
config HID_NTRIG
tristate "NTrig" if EMBEDDED
tristate "NTrig"
depends on USB_HID
default !EMBEDDED
---help---
Support for N-Trig touch screen.
config HID_ORTEK
tristate "Ortek" if EMBEDDED
depends on USB_HID
default !EMBEDDED
---help---
Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
config HID_PANTHERLORD
tristate "Pantherlord support" if EMBEDDED
depends on USB_HID
......@@ -227,6 +262,12 @@ config HID_PETALYNX
---help---
Support for Petalynx Maxter remote control.
config HID_QUANTA
tristate "Quanta Optical Touch"
depends on USB_HID
---help---
Support for Quanta Optical Touch dual-touch panels.
config HID_SAMSUNG
tristate "Samsung" if EMBEDDED
depends on USB_HID
......@@ -241,6 +282,12 @@ config HID_SONY
---help---
Support for Sony PS3 controller.
config HID_STANTUM
tristate "Stantum"
depends on USB_HID
---help---
Support for Stantum multitouch panel.
config HID_SUNPLUS
tristate "Sunplus" if EMBEDDED
depends on USB_HID
......@@ -305,9 +352,8 @@ config THRUSTMASTER_FF
Rumble Force or Force Feedback Wheel.
config HID_WACOM
tristate "Wacom Bluetooth devices support" if EMBEDDED
tristate "Wacom Bluetooth devices support"
depends on BT_HIDP
default !EMBEDDED
---help---
Support for Wacom Graphire Bluetooth tablet.
......
......@@ -18,7 +18,11 @@ endif
ifdef CONFIG_LOGIRUMBLEPAD2_FF
hid-logitech-objs += hid-lg2ff.o
endif
ifdef CONFIG_LOGIG940_FF
hid-logitech-objs += hid-lg3ff.o
endif
obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
......@@ -31,14 +35,19 @@ obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
obj-$(CONFIG_HID_KYE) += hid-kye.o
obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
obj-$(CONFIG_HID_MOSART) += hid-mosart.o
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
obj-$(CONFIG_HID_QUANTA) += hid-quanta.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
obj-$(CONFIG_HID_STANTUM) += hid-stantum.o
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
......
/*
* HID driver for 3M PCT multitouch panels
*
* Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/usb.h>
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("3M PCT multitouch panels");
MODULE_LICENSE("GPL");
#include "hid-ids.h"
struct mmm_finger {
__s32 x, y;
__u8 rank;
bool touch, valid;
};
struct mmm_data {
struct mmm_finger f[10];
__u8 curid, num;
bool touch, valid;
};
static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_BUTTON:
return -1;
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_X);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_Y);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
}
return 0;
case HID_UP_DIGITIZER:
switch (usage->hid) {
/* we do not want to map these: no input-oriented meaning */
case 0x14:
case 0x23:
case HID_DG_INPUTMODE:
case HID_DG_DEVICEINDEX:
case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
case HID_DG_INRANGE:
case HID_DG_CONFIDENCE:
return -1;
case HID_DG_TIPSWITCH:
/* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1;
case HID_DG_CONTACTID:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID);
return 1;
}
/* let hid-input decide for the others */
return 0;
case 0xff000000:
/* we do not want to map these: no input-oriented meaning */
return -1;
}
return 0;
}
static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
if (usage->type == EV_KEY || usage->type == EV_ABS)
clear_bit(usage->code, *bit);
return 0;
}
/*
* this function is called when a whole packet has been received and processed,
* so that it can decide what to send to the input layer.
*/
static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
{
struct mmm_finger *oldest = 0;
bool pressed = false, released = false;
int i;
/*
* we need to iterate on all fingers to decide if we have a press
* or a release event in our touchscreen emulation.
*/
for (i = 0; i < 10; ++i) {
struct mmm_finger *f = &md->f[i];
if (!f->valid) {
/* this finger is just placeholder data, ignore */
} else if (f->touch) {
/* this finger is on the screen */
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i);
input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
input_mt_sync(input);
/*
* touchscreen emulation: maintain the age rank
* of this finger, decide if we have a press
*/
if (f->rank == 0) {
f->rank = ++(md->num);
if (f->rank == 1)
pressed = true;
}
if (f->rank == 1)
oldest = f;
} else {
/* this finger took off the screen */
/* touchscreen emulation: maintain age rank of others */
int j;
for (j = 0; j < 10; ++j) {
struct mmm_finger *g = &md->f[j];
if (g->rank > f->rank) {
g->rank--;
if (g->rank == 1)
oldest = g;
}
}
f->rank = 0;
--(md->num);
if (md->num == 0)
released = true;
}
f->valid = 0;
}
/* touchscreen emulation */
if (oldest) {
if (pressed)
input_event(input, EV_KEY, BTN_TOUCH, 1);
input_event(input, EV_ABS, ABS_X, oldest->x);
input_event(input, EV_ABS, ABS_Y, oldest->y);
} else if (released) {
input_event(input, EV_KEY, BTN_TOUCH, 0);
}
}
/*
* this function is called upon all reports
* so that we can accumulate contact point information,
* and call input_mt_sync after each point.
*/
static int mmm_event(struct hid_device *hid, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct mmm_data *md = hid_get_drvdata(hid);
/*
* strangely, this function can be called before
* field->hidinput is initialized!
*/
if (hid->claimed & HID_CLAIMED_INPUT) {
struct input_dev *input = field->hidinput->input;
switch (usage->hid) {
case HID_DG_TIPSWITCH:
md->touch = value;
break;
case HID_DG_CONFIDENCE:
md->valid = value;
break;
case HID_DG_CONTACTID:
if (md->valid) {
md->curid = value;
md->f[value].touch = md->touch;
md->f[value].valid = 1;
}
break;
case HID_GD_X:
if (md->valid)
md->f[md->curid].x = value;
break;
case HID_GD_Y:
if (md->valid)
md->f[md->curid].y = value;
break;
case HID_DG_CONTACTCOUNT:
mmm_filter_event(md, input);
break;
}
}
/* we have handled the hidinput part, now remains hiddev */
if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
struct mmm_data *md;
md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
if (!md) {
dev_err(&hdev->dev, "cannot allocate 3M data\n");
return -ENOMEM;
}
hid_set_drvdata(hdev, md);
ret = hid_parse(hdev);
if (!ret)
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
kfree(md);
return ret;
}
static void mmm_remove(struct hid_device *hdev)
{
hid_hw_stop(hdev);
kfree(hid_get_drvdata(hdev));
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id mmm_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
{ }
};
MODULE_DEVICE_TABLE(hid, mmm_devices);
static const struct hid_usage_id mmm_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
};
static struct hid_driver mmm_driver = {
.name = "3m-pct",
.id_table = mmm_devices,
.probe = mmm_probe,
.remove = mmm_remove,
.input_mapping = mmm_input_mapping,
.input_mapped = mmm_input_mapped,
.usage_table = mmm_grabbed_usages,
.event = mmm_event,
};
static int __init mmm_init(void)
{
return hid_register_driver(&mmm_driver);
}
static void __exit mmm_exit(void)
{
hid_unregister_driver(&mmm_driver);
}
module_init(mmm_init);
module_exit(mmm_exit);
MODULE_LICENSE("GPL");
......@@ -40,6 +40,11 @@ module_param(fnmode, uint, 0644);
MODULE_PARM_DESC(fnmode, "Mode of fn key on Apple keyboards (0 = disabled, "
"[1] = fkeyslast, 2 = fkeysfirst)");
static unsigned int iso_layout = 1;
module_param(iso_layout, uint, 0644);
MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. "
"(0 = disabled, [1] = enabled)");
struct apple_sc {
unsigned long quirks;
unsigned int fn_on;
......@@ -199,6 +204,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
}
}
if (iso_layout) {
if (asc->quirks & APPLE_ISO_KEYBOARD) {
trans = apple_find_translation(apple_iso_keyboard, usage->code);
if (trans) {
......@@ -206,6 +212,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
return 1;
}
}
}
return 0;
}
......
......@@ -4,7 +4,7 @@
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2006-2007 Jiri Kosina
* Copyright (c) 2006-2010 Jiri Kosina
*/
/*
......@@ -51,7 +51,7 @@ EXPORT_SYMBOL_GPL(hid_debug);
* Register a new report for a device.
*/
static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
{
struct hid_report_enum *report_enum = device->report_enum + type;
struct hid_report *report;
......@@ -75,6 +75,7 @@ static struct hid_report *hid_register_report(struct hid_device *device, unsigne
return report;
}
EXPORT_SYMBOL_GPL(hid_register_report);
/*
* Register a new field for this report.
......@@ -387,7 +388,8 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
__u32 data;
unsigned n;
if (item->size == 0) {
/* Local delimiter could have value 0, which allows size to be 0 */
if (item->size == 0 && item->tag != HID_LOCAL_ITEM_TAG_DELIMITER) {
dbg_hid("item data expected for local item\n");
return -1;
}
......@@ -1248,11 +1250,13 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
/* a list of devices for which there is a specialized driver on HID bus */
static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) },
......@@ -1324,6 +1328,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
......@@ -1337,10 +1342,15 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
......@@ -1543,8 +1553,9 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
......@@ -1661,8 +1672,6 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
......
......@@ -864,13 +864,13 @@ static const char **names[EV_MAX + 1] = {
[EV_SND] = sounds, [EV_REP] = repeats,
};
void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f) {
static void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f)
{
seq_printf(f, "%s.%s", events[type] ? events[type] : "?",
names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
}
void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
{
int i, j, k;
struct hid_report *report;
......
......@@ -18,6 +18,9 @@
#ifndef HID_IDS_H_FILE
#define HID_IDS_H_FILE
#define USB_VENDOR_ID_3M 0x0596
#define USB_DEVICE_ID_3M1968 0x0500
#define USB_VENDOR_ID_A4TECH 0x09da
#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
#define USB_DEVICE_ID_A4TECH_X5_005D 0x000a
......@@ -56,6 +59,7 @@
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
#define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d
#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e
#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f
#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
......@@ -96,9 +100,12 @@
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
#define USB_DEVICE_ID_APPLE_IRCONTROL4 0x8242
#define USB_VENDOR_ID_ASUS 0x0b05
#define USB_DEVICE_ID_ASUS_LCM 0x1726
#define USB_DEVICE_ID_ASUS_LCM2 0x175b
#define USB_VENDOR_ID_ASUS 0x0486
#define USB_DEVICE_ID_ASUS_T91MT 0x0185
#define USB_VENDOR_ID_ASUSTEK 0x0b05
#define USB_DEVICE_ID_ASUSTEK_LCM 0x1726
#define USB_DEVICE_ID_ASUSTEK_LCM2 0x175b
#define USB_VENDOR_ID_ATEN 0x0557
#define USB_DEVICE_ID_ATEN_UC100KM 0x2004
......@@ -169,6 +176,9 @@
#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
#define USB_VENDOR_ID_ETURBOTOUCH 0x22b9
#define USB_DEVICE_ID_ETURBOTOUCH 0x0006
#define USB_VENDOR_ID_ETT 0x0664
#define USB_DEVICE_ID_TC5UH 0x0309
......@@ -303,6 +313,7 @@
#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2 0xc219
#define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D 0xc283
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
#define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940 0xc287
#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_LOGITECH_WINGMAN_FFG 0xc293
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
......@@ -365,6 +376,9 @@
#define USB_VENDOR_ID_ONTRAK 0x0a07
#define USB_DEVICE_ID_ONTRAK_ADU100 0x0064
#define USB_VENDOR_ID_ORTEK 0x05a4
#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
#define USB_VENDOR_ID_PANJIT 0x134c
#define USB_VENDOR_ID_PANTHERLORD 0x0810
......@@ -382,9 +396,16 @@
#define USB_VENDOR_ID_POWERCOM 0x0d9f
#define USB_DEVICE_ID_POWERCOM_UPS 0x0002
#define USB_VENDOR_ID_PRODIGE 0x05af
#define USB_DEVICE_ID_PRODIGE_CORDLESS 0x3062
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
#define USB_VENDOR_ID_QUANTA 0x0408
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH 0x3000
#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN 0x3001
#define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
......@@ -396,18 +417,20 @@
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST 0x0046
#define USB_VENDOR_ID_STANTUM 0x1f87
#define USB_DEVICE_ID_MTP 0x0002
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
#define USB_VENDOR_ID_SUNPLUS 0x04fc
#define USB_DEVICE_ID_SUNPLUS_WDESKTOP 0x05d8
#define USB_VENDOR_ID_TENX 0x1130
#define USB_DEVICE_ID_TENX_IBUDDY1 0x0001
#define USB_DEVICE_ID_TENX_IBUDDY2 0x0002
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
#define USB_VENDOR_ID_TOUCHPACK 0x1bfd
#define USB_DEVICE_ID_TOUCHPACK_RTS 0x1688
#define USB_VENDOR_ID_TOPMAX 0x0663
#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
......
/*
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
* Copyright (c) 2006-2010 Jiri Kosina
*
* HID to Linux Input mapping
*/
......@@ -193,12 +193,17 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
break;
case HID_UP_BUTTON:
code = ((usage->hid - 1) & 0xf);
code = ((usage->hid - 1) & HID_USAGE);
switch (field->application) {
case HID_GD_MOUSE:
case HID_GD_POINTER: code += 0x110; break;
case HID_GD_JOYSTICK: code += 0x120; break;
case HID_GD_JOYSTICK:
if (code <= 0xf)
code += BTN_JOYSTICK;
else
code += BTN_TRIGGER_HAPPY;
break;
case HID_GD_GAMEPAD: code += 0x130; break;
default:
switch (field->physical) {
......@@ -400,6 +405,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
case 0x192: map_key_clear(KEY_CALC); break;
case 0x194: map_key_clear(KEY_FILE); break;
case 0x196: map_key_clear(KEY_WWW); break;
case 0x199: map_key_clear(KEY_CHAT); break;
case 0x19c: map_key_clear(KEY_LOGOFF); break;
case 0x19e: map_key_clear(KEY_COFFEE); break;
case 0x1a6: map_key_clear(KEY_HELP); break;
......
......@@ -34,6 +34,7 @@
#define LG_FF 0x200
#define LG_FF2 0x400
#define LG_RDESC_REL_ABS 0x800
#define LG_FF3 0x1000
/*
* Certain Logitech keyboards send in report #3 keys which are far
......@@ -266,7 +267,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
goto err_free;
}
if (quirks & (LG_FF | LG_FF2))
if (quirks & (LG_FF | LG_FF2 | LG_FF3))
connect_mask &= ~HID_CONNECT_FF;
ret = hid_hw_start(hdev, connect_mask);
......@@ -279,6 +280,8 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
lgff_init(hdev);
if (quirks & LG_FF2)
lg2ff_init(hdev);
if (quirks & LG_FF3)
lg3ff_init(hdev);
return 0;
err_free:
......@@ -331,6 +334,8 @@ static const struct hid_device_id lg_devices[] = {
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940),
.driver_data = LG_FF3 },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR),
.driver_data = LG_RDESC_REL_ABS },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER),
......
......@@ -13,4 +13,10 @@ int lg2ff_init(struct hid_device *hdev);
static inline int lg2ff_init(struct hid_device *hdev) { return -1; }
#endif
#ifdef CONFIG_LOGIG940_FF
int lg3ff_init(struct hid_device *hdev);
#else
static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
#endif
#endif
/*
* Force feedback support for Logitech Flight System G940
*
* Copyright (c) 2009 Gary Stein <LordCnidarian@gmail.com>
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include "usbhid/usbhid.h"
#include "hid-lg.h"
/*
* G940 Theory of Operation (from experimentation)
*
* There are 63 fields (only 3 of them currently used)
* 0 - seems to be command field
* 1 - 30 deal with the x axis
* 31 -60 deal with the y axis
*
* Field 1 is x axis constant force
* Field 31 is y axis constant force
*
* other interesting fields 1,2,3,4 on x axis
* (same for 31,32,33,34 on y axis)
*
* 0 0 127 127 makes the joystick autocenter hard
*
* 127 0 127 127 makes the joystick loose on the right,
* but stops all movemnt left
*
* -127 0 -127 -127 makes the joystick loose on the left,
* but stops all movement right
*
* 0 0 -127 -127 makes the joystick rattle very hard
*
* I'm sure these are effects that I don't know enough about them
*/
struct lg3ff_device {
struct hid_report *report;
};
static int hid_lg3ff_play(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
struct hid_device *hid = input_get_drvdata(dev);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
int x, y;
/*
* Maxusage should always be 63 (maximum fields)
* likely a better way to ensure this data is clean
*/
memset(report->field[0]->value, 0, sizeof(__s32)*report->field[0]->maxusage);
switch (effect->type) {
case FF_CONSTANT:
/*
* Already clamped in ff_memless
* 0 is center (different then other logitech)
*/
x = effect->u.ramp.start_level;
y = effect->u.ramp.end_level;
/* send command byte */
report->field[0]->value[0] = 0x51;
/*
* Sign backwards from other Force3d pro
* which get recast here in two's complement 8 bits
*/
report->field[0]->value[1] = (unsigned char)(-x);
report->field[0]->value[31] = (unsigned char)(-y);
usbhid_submit_report(hid, report, USB_DIR_OUT);
break;
}
return 0;
}
static void hid_lg3ff_set_autocenter(struct input_dev *dev, u16 magnitude)
{
struct hid_device *hid = input_get_drvdata(dev);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
/*
* Auto Centering probed from device
* NOTE: deadman's switch on G940 must be covered
* for effects to work
*/
report->field[0]->value[0] = 0x51;
report->field[0]->value[1] = 0x00;
report->field[0]->value[2] = 0x00;
report->field[0]->value[3] = 0x7F;
report->field[0]->value[4] = 0x7F;
report->field[0]->value[31] = 0x00;
report->field[0]->value[32] = 0x00;
report->field[0]->value[33] = 0x7F;
report->field[0]->value[34] = 0x7F;
usbhid_submit_report(hid, report, USB_DIR_OUT);
}
static const signed short ff3_joystick_ac[] = {
FF_CONSTANT,
FF_AUTOCENTER,
-1
};
int lg3ff_init(struct hid_device *hid)
{
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct input_dev *dev = hidinput->input;
struct hid_report *report;
struct hid_field *field;
const signed short *ff_bits = ff3_joystick_ac;
int error;
int i;
/* Find the report to use */
if (list_empty(report_list)) {
err_hid("No output report found");
return -1;
}
/* Check that the report looks ok */
report = list_entry(report_list->next, struct hid_report, list);
if (!report) {
err_hid("NULL output report");
return -1;
}
field = report->field[0];
if (!field) {
err_hid("NULL field");
return -1;
}
/* Assume single fixed device G940 */
for (i = 0; ff_bits[i] >= 0; i++)
set_bit(ff_bits[i], dev->ffbit);
error = input_ff_create_memless(dev, NULL, hid_lg3ff_play);
if (error)
return error;
if (test_bit(FF_AUTOCENTER, dev->ffbit))
dev->ff->set_autocenter = hid_lg3ff_set_autocenter;
dev_info(&hid->dev, "Force feedback for Logitech Flight System G940 by "
"Gary Stein <LordCnidarian@gmail.com>\n");
return 0;
}
......@@ -67,6 +67,7 @@ static const struct dev_type devices[] = {
{ 0x046d, 0xc219, ff_rumble },
{ 0x046d, 0xc283, ff_joystick },
{ 0x046d, 0xc286, ff_joystick_ac },
{ 0x046d, 0xc287, ff_joystick_ac },
{ 0x046d, 0xc293, ff_joystick },
{ 0x046d, 0xc294, ff_wheel },
{ 0x046d, 0xc295, ff_joystick },
......
This diff is collapsed.
/*
* HID driver for the multitouch panel on the ASUS EeePC T91MT
*
* Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
* Copyright (c) 2010 Teemu Tuominen <teemu.tuominen@cybercom.com>
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usbhid/usbhid.h"
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("MosArt dual-touch panel");
MODULE_LICENSE("GPL");
#include "hid-ids.h"
struct mosart_data {
__u16 x, y;
__u8 id;
bool valid; /* valid finger data, or just placeholder? */
bool first; /* is this the first finger in this frame? */
bool activity_now; /* at least one active finger in this frame? */
bool activity; /* at least one active finger previously? */
};
static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_X);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_Y);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
}
return 0;
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_CONFIDENCE:
case HID_DG_TIPSWITCH:
case HID_DG_INPUTMODE:
case HID_DG_DEVICEINDEX:
case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
case HID_DG_TIPPRESSURE:
case HID_DG_WIDTH:
case HID_DG_HEIGHT:
return -1;
case HID_DG_INRANGE:
/* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1;
case HID_DG_CONTACTID:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID);
return 1;
}
return 0;
case 0xff000000:
/* ignore HID features */
return -1;
}
return 0;
}
static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
if (usage->type == EV_KEY || usage->type == EV_ABS)
clear_bit(usage->code, *bit);
return 0;
}
/*
* this function is called when a whole finger has been parsed,
* so that it can decide what to send to the input layer.
*/
static void mosart_filter_event(struct mosart_data *td, struct input_dev *input)
{
td->first = !td->first; /* touchscreen emulation */
if (!td->valid) {
/*
* touchscreen emulation: if no finger in this frame is valid
* and there previously was finger activity, this is a release
*/
if (!td->first && !td->activity_now && td->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 0);
td->activity = false;
}
return;
}
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
input_mt_sync(input);
td->valid = false;
/* touchscreen emulation: if first active finger in this frame... */
if (!td->activity_now) {
/* if there was no previous activity, emit touch event */
if (!td->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 1);
td->activity = true;
}
td->activity_now = true;
/* and in any case this is our preferred finger */
input_event(input, EV_ABS, ABS_X, td->x);
input_event(input, EV_ABS, ABS_Y, td->y);
}
}
static int mosart_event(struct hid_device *hid, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct mosart_data *td = hid_get_drvdata(hid);
if (hid->claimed & HID_CLAIMED_INPUT) {
struct input_dev *input = field->hidinput->input;
switch (usage->hid) {
case HID_DG_INRANGE:
td->valid = !!value;
break;
case HID_GD_X:
td->x = value;
break;
case HID_GD_Y:
td->y = value;
mosart_filter_event(td, input);
break;
case HID_DG_CONTACTID:
td->id = value;
break;
case HID_DG_CONTACTCOUNT:
/* touch emulation: this is the last field in a frame */
td->first = false;
td->activity_now = false;
break;
case HID_DG_CONFIDENCE:
case HID_DG_TIPSWITCH:
/* avoid interference from generic hidinput handling */
break;
default:
/* fallback to the generic hidinput handling */
return 0;
}
}
/* we have handled the hidinput part, now remains hiddev */
if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
struct mosart_data *td;
td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate MosArt data\n");
return -ENOMEM;
}
td->valid = false;
td->activity = false;
td->activity_now = false;
td->first = false;
hid_set_drvdata(hdev, td);
/* currently, it's better to have one evdev device only */
#if 0
hdev->quirks |= HID_QUIRK_MULTI_INPUT;
#endif
ret = hid_parse(hdev);
if (ret == 0)
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret == 0) {
struct hid_report_enum *re = hdev->report_enum
+ HID_FEATURE_REPORT;
struct hid_report *r = re->report_id_hash[7];
r->field[0]->value[0] = 0x02;
usbhid_submit_report(hdev, r, USB_DIR_OUT);
} else
kfree(td);
return ret;
}
static void mosart_remove(struct hid_device *hdev)
{
hid_hw_stop(hdev);
kfree(hid_get_drvdata(hdev));
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id mosart_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
{ }
};
MODULE_DEVICE_TABLE(hid, mosart_devices);
static const struct hid_usage_id mosart_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
};
static struct hid_driver mosart_driver = {
.name = "mosart",
.id_table = mosart_devices,
.probe = mosart_probe,
.remove = mosart_remove,
.input_mapping = mosart_input_mapping,
.input_mapped = mosart_input_mapped,
.usage_table = mosart_grabbed_usages,
.event = mosart_event,
};
static int __init mosart_init(void)
{
return hid_register_driver(&mosart_driver);
}
static void __exit mosart_exit(void)
{
hid_unregister_driver(&mosart_driver);
}
module_init(mosart_init);
module_exit(mosart_exit);
......@@ -25,11 +25,16 @@
EV_KEY, (c))
struct ntrig_data {
__s32 x, y, id, w, h;
char reading_a_point, found_contact_id;
char pen_active;
char finger_active;
char inverted;
/* Incoming raw values for a single contact */
__u16 x, y, w, h;
__u16 id;
__u8 confidence;
bool reading_mt;
__u8 first_contact_confidence;
__u8 mt_footer[4];
__u8 mt_foot_count;
};
/*
......@@ -42,8 +47,11 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
/* No special mappings needed for the pen and single touch */
if (field->physical)
return 0;
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
......@@ -66,18 +74,12 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
case HID_UP_DIGITIZER:
switch (usage->hid) {
/* we do not want to map these for now */
case HID_DG_CONTACTID: /* value is useless */
case HID_DG_CONTACTID: /* Not trustworthy, squelch for now */
case HID_DG_INPUTMODE:
case HID_DG_DEVICEINDEX:
case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
return -1;
/* original mapping by Rafi Rubin */
case HID_DG_CONFIDENCE:
nt_map_key_clear(BTN_TOOL_DOUBLETAP);
return 1;
/* width/height mapped on TouchMajor/TouchMinor/Orientation */
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
......@@ -104,6 +106,10 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
/* No special mappings needed for the pen and single touch */
if (field->physical)
return 0;
if (usage->type == EV_KEY || usage->type == EV_REL
|| usage->type == EV_ABS)
clear_bit(usage->code, *bit);
......@@ -123,31 +129,30 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
struct input_dev *input = field->hidinput->input;
struct ntrig_data *nd = hid_get_drvdata(hid);
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
case HID_DG_INRANGE:
if (field->application & 0x3)
nd->pen_active = (value != 0);
else
nd->finger_active = (value != 0);
return 0;
case HID_DG_INVERT:
nd->inverted = value;
/* No special handling needed for the pen */
if (field->application == HID_DG_PEN)
return 0;
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
case 0xff000001:
/* Tag indicating the start of a multitouch group */
nd->reading_mt = 1;
nd->first_contact_confidence = 0;
break;
case HID_DG_CONFIDENCE:
nd->confidence = value;
break;
case HID_GD_X:
nd->x = value;
nd->reading_a_point = 1;
/* Clear the contact footer */
nd->mt_foot_count = 0;
break;
case HID_GD_Y:
nd->y = value;
break;
case HID_DG_CONTACTID:
nd->id = value;
/* we receive this only when in multitouch mode */
nd->found_contact_id = 1;
break;
case HID_DG_WIDTH:
nd->w = value;
......@@ -159,35 +164,13 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
* report received in a finger event. We want
* to emit a normal (X, Y) position
*/
if (!nd->found_contact_id) {
if (nd->pen_active && nd->finger_active) {
input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
}
if (!nd->reading_mt) {
input_report_key(input, BTN_TOOL_DOUBLETAP,
(nd->confidence != 0));
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
break;
case HID_DG_TIPPRESSURE:
/*
* when in single touch mode, this is the last
* report received in a pen event. We want
* to emit a normal (X, Y) position
*/
if (! nd->found_contact_id) {
if (nd->pen_active && nd->finger_active) {
input_report_key(input,
nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
, 0);
input_report_key(input,
nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
, 1);
}
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
input_event(input, EV_ABS, ABS_PRESSURE, value);
}
break;
case 0xff000002:
/*
* we receive this when the device is in multitouch
......@@ -195,10 +178,34 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
* this usage tells if the contact point is real
* or a placeholder
*/
if (!nd->reading_a_point || value != 1)
/* Shouldn't get more than 4 footer packets, so skip */
if (nd->mt_foot_count >= 4)
break;
nd->mt_footer[nd->mt_foot_count++] = value;
/* if the footer isn't complete break */
if (nd->mt_foot_count != 4)
break;
/* Pen activity signal, trigger end of touch. */
if (nd->mt_footer[2]) {
nd->confidence = 0;
break;
}
/* If the contact was invalid */
if (!(nd->confidence && nd->mt_footer[0])
|| nd->w <= 250
|| nd->h <= 190) {
nd->confidence = 0;
break;
}
/* emit a normal (X, Y) for the first point only */
if (nd->id == 0) {
nd->first_contact_confidence = nd->confidence;
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
......@@ -220,8 +227,39 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
ABS_MT_TOUCH_MINOR, nd->w);
}
input_mt_sync(field->hidinput->input);
nd->reading_a_point = 0;
nd->found_contact_id = 0;
break;
case HID_DG_CONTACTCOUNT: /* End of a multitouch group */
if (!nd->reading_mt)
break;
nd->reading_mt = 0;
if (nd->first_contact_confidence) {
switch (value) {
case 0: /* for single touch devices */
case 1:
input_report_key(input,
BTN_TOOL_DOUBLETAP, 1);
break;
case 2:
input_report_key(input,
BTN_TOOL_TRIPLETAP, 1);
break;
case 3:
default:
input_report_key(input,
BTN_TOOL_QUADTAP, 1);
}
input_report_key(input, BTN_TOUCH, 1);
} else {
input_report_key(input,
BTN_TOOL_DOUBLETAP, 0);
input_report_key(input,
BTN_TOOL_TRIPLETAP, 0);
input_report_key(input,
BTN_TOOL_QUADTAP, 0);
}
break;
default:
......@@ -231,7 +269,7 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
}
/* we have handled the hidinput part, now remains hiddev */
if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_hid_event)
hid->hiddev_hid_event(hid, field, usage, value);
return 1;
......@@ -241,23 +279,67 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
struct ntrig_data *nd;
struct hid_input *hidinput;
struct input_dev *input;
if (id->driver_data)
hdev->quirks |= HID_QUIRK_MULTI_INPUT;
nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
if (!nd) {
dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
return -ENOMEM;
}
nd->reading_a_point = 0;
nd->found_contact_id = 0;
nd->reading_mt = 0;
hid_set_drvdata(hdev, nd);
ret = hid_parse(hdev);
if (!ret)
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
dev_err(&hdev->dev, "parse failed\n");
goto err_free;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
if (ret) {
dev_err(&hdev->dev, "hw start failed\n");
goto err_free;
}
if (ret)
kfree (nd);
list_for_each_entry(hidinput, &hdev->inputs, list) {
input = hidinput->input;
switch (hidinput->report->field[0]->application) {
case HID_DG_PEN:
input->name = "N-Trig Pen";
break;
case HID_DG_TOUCHSCREEN:
__clear_bit(BTN_TOOL_PEN, input->keybit);
/*
* A little something special to enable
* two and three finger taps.
*/
__set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
__set_bit(BTN_TOOL_QUADTAP, input->keybit);
/*
* The physical touchscreen (single touch)
* input has a value for physical, whereas
* the multitouch only has logical input
* fields.
*/
input->name =
(hidinput->report->field[0]
->physical) ?
"N-Trig Touchscreen" :
"N-Trig MultiTouch";
break;
}
}
return 0;
err_free:
kfree(nd);
return ret;
}
......@@ -276,7 +358,7 @@ MODULE_DEVICE_TABLE(hid, ntrig_devices);
static const struct hid_usage_id ntrig_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1 }
};
static struct hid_driver ntrig_driver = {
......
/*
* HID driver for Ortek WKB-2000 (wireless keyboard + mouse trackpad).
* Fixes LogicalMaximum error in USB report description, see
* http://bugzilla.kernel.org/show_bug.cgi?id=14787
*
* Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
static void ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int rsize)
{
if (rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 "
"report descriptor.\n");
rdesc[55] = 0x92;
}
}
static const struct hid_device_id ortek_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
{ }
};
MODULE_DEVICE_TABLE(hid, ortek_devices);
static struct hid_driver ortek_driver = {
.name = "ortek",
.id_table = ortek_devices,
.report_fixup = ortek_report_fixup
};
static int __init ortek_init(void)
{
return hid_register_driver(&ortek_driver);
}
static void __exit ortek_exit(void)
{
hid_unregister_driver(&ortek_driver);
}
module_init(ortek_init);
module_exit(ortek_exit);
MODULE_LICENSE("GPL");
/*
* HID driver for Quanta Optical Touch dual-touch panels
*
* Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("Quanta dual-touch panel");
MODULE_LICENSE("GPL");
#include "hid-ids.h"
struct quanta_data {
__u16 x, y;
__u8 id;
bool valid; /* valid finger data, or just placeholder? */
bool first; /* is this the first finger in this frame? */
bool activity_now; /* at least one active finger in this frame? */
bool activity; /* at least one active finger previously? */
};
static int quanta_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_X);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_Y);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
}
return 0;
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_CONFIDENCE:
case HID_DG_TIPSWITCH:
case HID_DG_INPUTMODE:
case HID_DG_DEVICEINDEX:
case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
case HID_DG_TIPPRESSURE:
case HID_DG_WIDTH:
case HID_DG_HEIGHT:
return -1;
case HID_DG_INRANGE:
/* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1;
case HID_DG_CONTACTID:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID);
return 1;
}
return 0;
case 0xff000000:
/* ignore vendor-specific features */
return -1;
}
return 0;
}
static int quanta_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
if (usage->type == EV_KEY || usage->type == EV_ABS)
clear_bit(usage->code, *bit);
return 0;
}
/*
* this function is called when a whole finger has been parsed,
* so that it can decide what to send to the input layer.
*/
static void quanta_filter_event(struct quanta_data *td, struct input_dev *input)
{
td->first = !td->first; /* touchscreen emulation */
if (!td->valid) {
/*
* touchscreen emulation: if no finger in this frame is valid
* and there previously was finger activity, this is a release
*/
if (!td->first && !td->activity_now && td->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 0);
td->activity = false;
}
return;
}
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
input_mt_sync(input);
td->valid = false;
/* touchscreen emulation: if first active finger in this frame... */
if (!td->activity_now) {
/* if there was no previous activity, emit touch event */
if (!td->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 1);
td->activity = true;
}
td->activity_now = true;
/* and in any case this is our preferred finger */
input_event(input, EV_ABS, ABS_X, td->x);
input_event(input, EV_ABS, ABS_Y, td->y);
}
}
static int quanta_event(struct hid_device *hid, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct quanta_data *td = hid_get_drvdata(hid);
if (hid->claimed & HID_CLAIMED_INPUT) {
struct input_dev *input = field->hidinput->input;
switch (usage->hid) {
case HID_DG_INRANGE:
td->valid = !!value;
break;
case HID_GD_X:
td->x = value;
break;
case HID_GD_Y:
td->y = value;
quanta_filter_event(td, input);
break;
case HID_DG_CONTACTID:
td->id = value;
break;
case HID_DG_CONTACTCOUNT:
/* touch emulation: this is the last field in a frame */
td->first = false;
td->activity_now = false;
break;
case HID_DG_CONFIDENCE:
case HID_DG_TIPSWITCH:
/* avoid interference from generic hidinput handling */
break;
default:
/* fallback to the generic hidinput handling */
return 0;
}
}
/* we have handled the hidinput part, now remains hiddev */
if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
static int quanta_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
struct quanta_data *td;
td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate Quanta Touch data\n");
return -ENOMEM;
}
td->valid = false;
td->activity = false;
td->activity_now = false;
td->first = false;
hid_set_drvdata(hdev, td);
ret = hid_parse(hdev);
if (!ret)
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
kfree(td);
return ret;
}
static void quanta_remove(struct hid_device *hdev)
{
hid_hw_stop(hdev);
kfree(hid_get_drvdata(hdev));
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id quanta_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
{ }
};
MODULE_DEVICE_TABLE(hid, quanta_devices);
static const struct hid_usage_id quanta_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
};
static struct hid_driver quanta_driver = {
.name = "quanta-touch",
.id_table = quanta_devices,
.probe = quanta_probe,
.remove = quanta_remove,
.input_mapping = quanta_input_mapping,
.input_mapped = quanta_input_mapped,
.usage_table = quanta_grabbed_usages,
.event = quanta_event,
};
static int __init quanta_init(void)
{
return hid_register_driver(&quanta_driver);
}
static void __exit quanta_exit(void)
{
hid_unregister_driver(&quanta_driver);
}
module_init(quanta_init);
module_exit(quanta_exit);
......@@ -48,7 +48,7 @@ static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
* to "operational". Without this, the ps3 controller will not report any
* events.
*/
static int sony_set_operational(struct hid_device *hdev)
static int sony_set_operational_usb(struct hid_device *hdev)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
struct usb_device *dev = interface_to_usbdev(intf);
......@@ -73,6 +73,12 @@ static int sony_set_operational(struct hid_device *hdev)
return ret;
}
static int sony_set_operational_bt(struct hid_device *hdev)
{
unsigned char buf[] = { 0x53, 0xf4, 0x42, 0x03, 0x00, 0x00 };
return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
}
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
......@@ -81,7 +87,7 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
sc = kzalloc(sizeof(*sc), GFP_KERNEL);
if (sc == NULL) {
dev_err(&hdev->dev, "can't alloc apple descriptor\n");
dev_err(&hdev->dev, "can't alloc sony descriptor\n");
return -ENOMEM;
}
......@@ -101,7 +107,17 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
goto err_free;
}
ret = sony_set_operational(hdev);
switch (hdev->bus) {
case BUS_USB:
ret = sony_set_operational_usb(hdev);
break;
case BUS_BLUETOOTH:
ret = sony_set_operational_bt(hdev);
break;
default:
ret = 0;
}
if (ret < 0)
goto err_stop;
......@@ -121,6 +137,7 @@ static void sony_remove(struct hid_device *hdev)
static const struct hid_device_id sony_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
.driver_data = VAIO_RDESC_CONSTANT },
{ }
......
/*
* HID driver for Stantum multitouch panels
*
* Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("Stantum HID multitouch panels");
MODULE_LICENSE("GPL");
#include "hid-ids.h"
struct stantum_data {
__s32 x, y, z, w, h; /* x, y, pressure, width, height */
__u16 id; /* touch id */
bool valid; /* valid finger data, or just placeholder? */
bool first; /* first finger in the HID packet? */
bool activity; /* at least one active finger so far? */
};
static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_GENDESK:
switch (usage->hid) {
case HID_GD_X:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_X);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_X,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
case HID_GD_Y:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_POSITION_Y);
/* touchscreen emulation */
input_set_abs_params(hi->input, ABS_Y,
field->logical_minimum,
field->logical_maximum, 0, 0);
return 1;
}
return 0;
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_INRANGE:
case HID_DG_CONFIDENCE:
case HID_DG_INPUTMODE:
case HID_DG_DEVICEINDEX:
case HID_DG_CONTACTCOUNT:
case HID_DG_CONTACTMAX:
return -1;
case HID_DG_TIPSWITCH:
/* touchscreen emulation */
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MAJOR);
return 1;
case HID_DG_HEIGHT:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MINOR);
input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
1, 1, 0, 0);
return 1;
case HID_DG_TIPPRESSURE:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_PRESSURE);
return 1;
case HID_DG_CONTACTID:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TRACKING_ID);
return 1;
}
return 0;
case 0xff000000:
/* no input-oriented meaning */
return -1;
}
return 0;
}
static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
if (usage->type == EV_KEY || usage->type == EV_ABS)
clear_bit(usage->code, *bit);
return 0;
}
/*
* this function is called when a whole finger has been parsed,
* so that it can decide what to send to the input layer.
*/
static void stantum_filter_event(struct stantum_data *sd,
struct input_dev *input)
{
bool wide;
if (!sd->valid) {
/*
* touchscreen emulation: if the first finger is not valid and
* there previously was finger activity, this is a release
*/
if (sd->first && sd->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 0);
sd->activity = false;
}
return;
}
input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id);
input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y);
wide = (sd->w > sd->h);
input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h);
input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w);
input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z);
input_mt_sync(input);
sd->valid = false;
/* touchscreen emulation */
if (sd->first) {
if (!sd->activity) {
input_event(input, EV_KEY, BTN_TOUCH, 1);
sd->activity = true;
}
input_event(input, EV_ABS, ABS_X, sd->x);
input_event(input, EV_ABS, ABS_Y, sd->y);
}
sd->first = false;
}
static int stantum_event(struct hid_device *hid, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct stantum_data *sd = hid_get_drvdata(hid);
if (hid->claimed & HID_CLAIMED_INPUT) {
struct input_dev *input = field->hidinput->input;
switch (usage->hid) {
case HID_DG_INRANGE:
/* this is the last field in a finger */
stantum_filter_event(sd, input);
break;
case HID_DG_WIDTH:
sd->w = value;
break;
case HID_DG_HEIGHT:
sd->h = value;
break;
case HID_GD_X:
sd->x = value;
break;
case HID_GD_Y:
sd->y = value;
break;
case HID_DG_TIPPRESSURE:
sd->z = value;
break;
case HID_DG_CONTACTID:
sd->id = value;
break;
case HID_DG_CONFIDENCE:
sd->valid = !!value;
break;
case 0xff000002:
/* this comes only before the first finger */
sd->first = true;
break;
default:
/* ignore the others */
return 1;
}
}
/* we have handled the hidinput part, now remains hiddev */
if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
hid->hiddev_hid_event(hid, field, usage, value);
return 1;
}
static int stantum_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
int ret;
struct stantum_data *sd;
sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL);
if (!sd) {
dev_err(&hdev->dev, "cannot allocate Stantum data\n");
return -ENOMEM;
}
sd->valid = false;
sd->first = false;
sd->activity = false;
hid_set_drvdata(hdev, sd);
ret = hid_parse(hdev);
if (!ret)
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
kfree(sd);
return ret;
}
static void stantum_remove(struct hid_device *hdev)
{
hid_hw_stop(hdev);
kfree(hid_get_drvdata(hdev));
hid_set_drvdata(hdev, NULL);
}
static const struct hid_device_id stantum_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
{ }
};
MODULE_DEVICE_TABLE(hid, stantum_devices);
static const struct hid_usage_id stantum_grabbed_usages[] = {
{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
};
static struct hid_driver stantum_driver = {
.name = "stantum",
.id_table = stantum_devices,
.probe = stantum_probe,
.remove = stantum_remove,
.input_mapping = stantum_input_mapping,
.input_mapped = stantum_input_mapped,
.usage_table = stantum_grabbed_usages,
.event = stantum_event,
};
static int __init stantum_init(void)
{
return hid_register_driver(&stantum_driver);
}
static void __exit stantum_exit(void)
{
hid_unregister_driver(&stantum_driver);
}
module_init(stantum_init);
module_exit(stantum_exit);
......@@ -156,7 +156,9 @@ static int wacom_probe(struct hid_device *hdev,
struct hid_input *hidinput;
struct input_dev *input;
struct wacom_data *wdata;
char rep_data[2];
int ret;
int limit;
wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
if (wdata == NULL) {
......@@ -166,6 +168,7 @@ static int wacom_probe(struct hid_device *hdev,
hid_set_drvdata(hdev, wdata);
/* Parse the HID report now */
ret = hid_parse(hdev);
if (ret) {
dev_err(&hdev->dev, "parse failed\n");
......@@ -178,6 +181,31 @@ static int wacom_probe(struct hid_device *hdev,
goto err_free;
}
/*
* Note that if the raw queries fail, it's not a hard failure and it
* is safe to continue
*/
/* Set Wacom mode2 */
rep_data[0] = 0x03; rep_data[1] = 0x00;
limit = 3;
do {
ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
HID_FEATURE_REPORT);
} while (ret < 0 && limit-- > 0);
if (ret < 0)
dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
/* 0x06 - high reporting speed, 0x05 - low speed */
rep_data[0] = 0x06; rep_data[1] = 0x00;
limit = 3;
do {
ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
HID_FEATURE_REPORT);
} while (ret < 0 && limit-- > 0);
if (ret < 0)
dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
input = hidinput->input;
......
......@@ -134,7 +134,7 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t
goto out;
}
ret = dev->hid_output_raw_report(dev, buf, count);
ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT);
out:
kfree(buf);
return ret;
......
......@@ -5,7 +5,7 @@
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2007-2008 Oliver Neukum
* Copyright (c) 2006-2009 Jiri Kosina
* Copyright (c) 2006-2010 Jiri Kosina
*/
/*
......@@ -316,6 +316,7 @@ static int hid_submit_out(struct hid_device *hid)
err_hid("usb_submit_urb(out) failed");
return -1;
}
usbhid->last_out = jiffies;
} else {
/*
* queue work to wake up the device.
......@@ -377,6 +378,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
err_hid("usb_submit_urb(ctrl) failed");
return -1;
}
usbhid->last_ctrl = jiffies;
} else {
/*
* queue work to wake up the device.
......@@ -512,9 +514,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
usbhid->out[usbhid->outhead].report = report;
usbhid->outhead = head;
if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
if (hid_submit_out(hid))
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
} else {
/*
* the queue is known to run
* but an earlier request may be stuck
* we may need to time out
* no race because this is called under
* spinlock
*/
if (time_after(jiffies, usbhid->last_out + HZ * 5))
usb_unlink_urb(usbhid->urbout);
}
return;
}
......@@ -535,9 +548,20 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
usbhid->ctrl[usbhid->ctrlhead].dir = dir;
usbhid->ctrlhead = head;
if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
if (hid_submit_ctrl(hid))
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
} else {
/*
* the queue is known to run
* but an earlier request may be stuck
* we may need to time out
* no race because this is called under
* spinlock
*/
if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
usb_unlink_urb(usbhid->urbctrl);
}
}
void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
......@@ -774,7 +798,8 @@ static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
return 0;
}
static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count)
static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count,
unsigned char report_type)
{
struct usbhid_device *usbhid = hid->driver_data;
struct usb_device *dev = hid_to_usb_dev(hid);
......@@ -785,7 +810,7 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
((HID_OUTPUT_REPORT + 1) << 8) | *buf,
((report_type + 1) << 8) | *buf,
interface->desc.bInterfaceNumber, buf + 1, count - 1,
USB_CTRL_SET_TIMEOUT);
......@@ -981,9 +1006,6 @@ static int usbhid_start(struct hid_device *hid)
spin_lock_init(&usbhid->lock);
usbhid->intf = intf;
usbhid->ifnum = interface->desc.bInterfaceNumber;
usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
if (!usbhid->urbctrl) {
ret = -ENOMEM;
......@@ -1154,6 +1176,8 @@ static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *
hid->driver_data = usbhid;
usbhid->hid = hid;
usbhid->intf = intf;
usbhid->ifnum = interface->desc.bInterfaceNumber;
ret = hid_add_device(hid);
if (ret) {
......@@ -1342,7 +1366,7 @@ static int hid_reset_resume(struct usb_interface *intf)
#endif /* CONFIG_PM */
static struct usb_device_id hid_usb_ids [] = {
static const struct usb_device_id hid_usb_ids[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
.bInterfaceClass = USB_INTERFACE_CLASS_HID },
{ } /* Terminating entry */
......
......@@ -43,8 +43,10 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
{ USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
......@@ -57,6 +59,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
......
......@@ -80,12 +80,14 @@ struct usbhid_device {
unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
char *ctrlbuf; /* Control buffer */
dma_addr_t ctrlbuf_dma; /* Control buffer dma */
unsigned long last_ctrl; /* record of last output for timeouts */
struct urb *urbout; /* Output URB */
struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
unsigned char outhead, outtail; /* Output pipe fifo head & tail */
char *outbuf; /* Output buffer */
dma_addr_t outbuf_dma; /* Output buffer dma */
unsigned long last_out; /* record of last output for timeouts */
spinlock_t lock; /* fifo spinlock */
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
......
......@@ -501,7 +501,7 @@ struct hid_device { /* device report descriptor */
void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
/* handler for raw output data, used by hidraw */
int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t);
int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
/* debugging support via debugfs */
unsigned short debug;
......@@ -663,7 +663,7 @@ struct hid_ll_driver {
/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
/* We ignore a few input applications that are not widely used */
#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006)))
/* HID core API */
......@@ -690,6 +690,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int);
int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
void hid_output_report(struct hid_report *report, __u8 *data);
struct hid_device *hid_allocate_device(void);
struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
int hid_check_keys_pressed(struct hid_device *hid);
int hid_connect(struct hid_device *hid, unsigned int connect_mask);
......
......@@ -598,6 +598,48 @@ struct input_absinfo {
#define KEY_CAMERA_FOCUS 0x210
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
#define BTN_TRIGGER_HAPPY3 0x2c2
#define BTN_TRIGGER_HAPPY4 0x2c3
#define BTN_TRIGGER_HAPPY5 0x2c4
#define BTN_TRIGGER_HAPPY6 0x2c5
#define BTN_TRIGGER_HAPPY7 0x2c6
#define BTN_TRIGGER_HAPPY8 0x2c7
#define BTN_TRIGGER_HAPPY9 0x2c8
#define BTN_TRIGGER_HAPPY10 0x2c9
#define BTN_TRIGGER_HAPPY11 0x2ca
#define BTN_TRIGGER_HAPPY12 0x2cb
#define BTN_TRIGGER_HAPPY13 0x2cc
#define BTN_TRIGGER_HAPPY14 0x2cd
#define BTN_TRIGGER_HAPPY15 0x2ce
#define BTN_TRIGGER_HAPPY16 0x2cf
#define BTN_TRIGGER_HAPPY17 0x2d0
#define BTN_TRIGGER_HAPPY18 0x2d1
#define BTN_TRIGGER_HAPPY19 0x2d2
#define BTN_TRIGGER_HAPPY20 0x2d3
#define BTN_TRIGGER_HAPPY21 0x2d4
#define BTN_TRIGGER_HAPPY22 0x2d5
#define BTN_TRIGGER_HAPPY23 0x2d6
#define BTN_TRIGGER_HAPPY24 0x2d7
#define BTN_TRIGGER_HAPPY25 0x2d8
#define BTN_TRIGGER_HAPPY26 0x2d9
#define BTN_TRIGGER_HAPPY27 0x2da
#define BTN_TRIGGER_HAPPY28 0x2db
#define BTN_TRIGGER_HAPPY29 0x2dc
#define BTN_TRIGGER_HAPPY30 0x2dd
#define BTN_TRIGGER_HAPPY31 0x2de
#define BTN_TRIGGER_HAPPY32 0x2df
#define BTN_TRIGGER_HAPPY33 0x2e0
#define BTN_TRIGGER_HAPPY34 0x2e1
#define BTN_TRIGGER_HAPPY35 0x2e2
#define BTN_TRIGGER_HAPPY36 0x2e3
#define BTN_TRIGGER_HAPPY37 0x2e4
#define BTN_TRIGGER_HAPPY38 0x2e5
#define BTN_TRIGGER_HAPPY39 0x2e6
#define BTN_TRIGGER_HAPPY40 0x2e7
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define KEY_MAX 0x2ff
......
......@@ -313,10 +313,21 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep
return hidp_queue_report(session, buf, rsize);
}
static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
unsigned char report_type)
{
if (hidp_send_ctrl_message(hid->driver_data,
HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE,
switch (report_type) {
case HID_FEATURE_REPORT:
report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE;
break;
case HID_OUTPUT_REPORT:
report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
break;
default:
return -EINVAL;
}
if (hidp_send_ctrl_message(hid->driver_data, report_type,
data, count))
return -ENOMEM;
return count;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment