octeontx2-pf: TC flower offload support for ICMP type and code

Adds tc offload support for matching on ICMP type and code.

Example usage:
To enable adding tc ingress rules
        tc qdisc add dev eth0 ingress

TC rule drop the ICMP echo reply:
        tc filter add dev eth0 protocol ip parent ffff: \
        flower ip_proto icmp type 8 code 0 skip_sw action drop

TC rule to drop ICMPv6 echo reply:
        tc filter add dev eth0 protocol ipv6 parent ffff: flower \
        indev eth0 ip_proto icmpv6 type 128 code 0 action drop
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/octeontx2/af/mbox.h

@@ -1479,6 +1479,8 @@ struct flow_msg {
 #define OTX2_FLOWER_MASK_MPLS_TTL		GENMASK(7, 0)
 #define OTX2_FLOWER_MASK_MPLS_NON_TTL		GENMASK(31, 8)
 	u32 mpls_lse[4];
+	u8 icmp_type;
+	u8 icmp_code;
 };
 
 struct npc_install_flow_req {

drivers/net/ethernet/marvell/octeontx2/af/npc.h

@@ -214,6 +214,8 @@ enum key_fields {
 	NPC_MPLS3_TTL,
 	NPC_MPLS4_LBTCBOS,
 	NPC_MPLS4_TTL,
+	NPC_TYPE_ICMP,
+	NPC_CODE_ICMP,
 	NPC_HEADER_FIELDS_MAX,
 	NPC_CHAN = NPC_HEADER_FIELDS_MAX, /* Valid when Rx */
 	NPC_PF_FUNC, /* Valid when Tx */

drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c

@@ -2889,6 +2889,14 @@ static void rvu_dbg_npc_mcam_show_flows(struct seq_file *s,
 			RVU_DBG_PRINT_MPLS_TTL(rule->packet.mpls_lse[3],
 					       rule->mask.mpls_lse[3]);
 			break;
+		case NPC_TYPE_ICMP:
+			seq_printf(s, "%d ", rule->packet.icmp_type);
+			seq_printf(s, "mask 0x%x\n", rule->mask.icmp_type);
+			break;
+		case NPC_CODE_ICMP:
+			seq_printf(s, "%d ", rule->packet.icmp_code);
+			seq_printf(s, "mask 0x%x\n", rule->mask.icmp_code);
+			break;
 		default:
 			seq_puts(s, "\n");
 			break;

drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c

@@ -51,6 +51,8 @@ static const char * const npc_flow_names[] = {
 	[NPC_MPLS3_TTL]     = "lse depth 3 ttl",
 	[NPC_MPLS4_LBTCBOS] = "lse depth 4 label tc bos",
 	[NPC_MPLS4_TTL]     = "lse depth 4",
+	[NPC_TYPE_ICMP] = "icmp type",
+	[NPC_CODE_ICMP] = "icmp code",
 	[NPC_UNKNOWN]	= "unknown",
 };
 
@@ -526,6 +528,8 @@ do {									       \
 	NPC_SCAN_HDR(NPC_DPORT_TCP, NPC_LID_LD, NPC_LT_LD_TCP, 2, 2);
 	NPC_SCAN_HDR(NPC_SPORT_SCTP, NPC_LID_LD, NPC_LT_LD_SCTP, 0, 2);
 	NPC_SCAN_HDR(NPC_DPORT_SCTP, NPC_LID_LD, NPC_LT_LD_SCTP, 2, 2);
+	NPC_SCAN_HDR(NPC_TYPE_ICMP, NPC_LID_LD, NPC_LT_LD_ICMP, 0, 1);
+	NPC_SCAN_HDR(NPC_CODE_ICMP, NPC_LID_LD, NPC_LT_LD_ICMP, 1, 1);
 	NPC_SCAN_HDR(NPC_ETYPE_ETHER, NPC_LID_LA, NPC_LT_LA_ETHER, 12, 2);
 	NPC_SCAN_HDR(NPC_ETYPE_TAG1, NPC_LID_LB, NPC_LT_LB_CTAG, 4, 2);
 	NPC_SCAN_HDR(NPC_ETYPE_TAG2, NPC_LID_LB, NPC_LT_LB_STAG_QINQ, 8, 2);
@@ -555,7 +559,7 @@ static void npc_set_features(struct rvu *rvu, int blkaddr, u8 intf)
 {
 	struct npc_mcam *mcam = &rvu->hw->mcam;
 	u64 *features = &mcam->rx_features;
-	u64 tcp_udp_sctp;
+	u64 proto_flags;
 	int hdr;
 
 	if (is_npc_intf_tx(intf))
@@ -566,18 +570,21 @@ static void npc_set_features(struct rvu *rvu, int blkaddr, u8 intf)
 			*features |= BIT_ULL(hdr);
 	}
 
-	tcp_udp_sctp = BIT_ULL(NPC_SPORT_TCP) | BIT_ULL(NPC_SPORT_UDP) |
+	proto_flags = BIT_ULL(NPC_SPORT_TCP) | BIT_ULL(NPC_SPORT_UDP) |
 		       BIT_ULL(NPC_DPORT_TCP) | BIT_ULL(NPC_DPORT_UDP) |
-		       BIT_ULL(NPC_SPORT_SCTP) | BIT_ULL(NPC_DPORT_SCTP);
+		       BIT_ULL(NPC_SPORT_SCTP) | BIT_ULL(NPC_DPORT_SCTP) |
+		       BIT_ULL(NPC_SPORT_SCTP) | BIT_ULL(NPC_DPORT_SCTP) |
+		       BIT_ULL(NPC_TYPE_ICMP) | BIT_ULL(NPC_CODE_ICMP);
 
 	/* for tcp/udp/sctp corresponding layer type should be in the key */
-	if (*features & tcp_udp_sctp) {
+	if (*features & proto_flags) {
 		if (!npc_check_field(rvu, blkaddr, NPC_LD, intf))
-			*features &= ~tcp_udp_sctp;
+			*features &= ~proto_flags;
 		else
 			*features |= BIT_ULL(NPC_IPPROTO_TCP) |
 				     BIT_ULL(NPC_IPPROTO_UDP) |
-				     BIT_ULL(NPC_IPPROTO_SCTP);
+				     BIT_ULL(NPC_IPPROTO_SCTP) |
+				     BIT_ULL(NPC_IPPROTO_ICMP);
 	}
 
 	/* for AH/ICMP/ICMPv6/, check if corresponding layer type is present in the key */
@@ -971,6 +978,10 @@ do {									      \
 		       ntohs(mask->sport), 0);
 	NPC_WRITE_FLOW(NPC_DPORT_SCTP, dport, ntohs(pkt->dport), 0,
 		       ntohs(mask->dport), 0);
+	NPC_WRITE_FLOW(NPC_TYPE_ICMP, icmp_type, pkt->icmp_type, 0,
+		       mask->icmp_type, 0);
+	NPC_WRITE_FLOW(NPC_CODE_ICMP, icmp_code, pkt->icmp_code, 0,
+		       mask->icmp_code, 0);
 
 	NPC_WRITE_FLOW(NPC_IPSEC_SPI, spi, ntohl(pkt->spi), 0,
 		       ntohl(mask->spi), 0);

drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c

@@ -522,6 +522,7 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
 	      BIT_ULL(FLOW_DISSECTOR_KEY_PORTS) |
 	      BIT(FLOW_DISSECTOR_KEY_IPSEC) |
 	      BIT_ULL(FLOW_DISSECTOR_KEY_MPLS) |
+	      BIT_ULL(FLOW_DISSECTOR_KEY_ICMP) |
 	      BIT_ULL(FLOW_DISSECTOR_KEY_IP))))  {
 		netdev_info(nic->netdev, "unsupported flow used key 0x%llx",
 			    dissector->used_keys);
@@ -796,6 +797,19 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
 		}
 	}
 
+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ICMP)) {
+		struct flow_match_icmp match;
+
+		flow_rule_match_icmp(rule, &match);
+
+		flow_spec->icmp_type = match.key->type;
+		flow_mask->icmp_type = match.mask->type;
+		req->features |= BIT_ULL(NPC_TYPE_ICMP);
+
+		flow_spec->icmp_code = match.key->code;
+		flow_mask->icmp_code = match.mask->code;
+		req->features |= BIT_ULL(NPC_CODE_ICMP);
+	}
 	return otx2_tc_parse_actions(nic, &rule->action, req, f, node);
 }