media: dvb-usb: add T230 to dvbsky

commit 5fa88151 ("[media] dvb-usb-cxusb: Geniatech T230 - resync TS
FIFO after lock") does not solve the problem for all devices. This is the
same issue reported on the T230C, which was moved to the dvbsky.c driver
to work around this issue in commit 57422405 ("media: dvbsky: MyGica
T230C support").

In addition, the cxusb driver causes an oops when unplugging the device
while streaming; this problem does not happen any more.
Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/usb/dvb-usb-v2/dvbsky.c

@@ -552,11 +552,19 @@ static int dvbsky_mygica_t230c_attach(struct dvb_usb_adapter *adap)
 
 	/* attach tuner */
 	si2157_config.fe = adap->fe[0];
+	if (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_MYGICA_T230) {
+		si2157_config.if_port = 1;
+		state->i2c_client_tuner = dvb_module_probe("si2157", NULL,
+							   i2c_adapter,
+							   0x60,
+							   &si2157_config);
+	} else {
 		si2157_config.if_port = 0;
-
 		state->i2c_client_tuner = dvb_module_probe("si2157", "si2141",
 							   i2c_adapter,
-						   0x60, &si2157_config);
+							   0x60,
+							   &si2157_config);
+	}
 	if (!state->i2c_client_tuner) {
 		dvb_module_release(state->i2c_client_demod);
 		return -ENODEV;
@@ -778,6 +786,9 @@ static const struct usb_device_id dvbsky_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R4,
 		&dvbsky_s960_props, "Terratec Cinergy S2 Rev.4",
 		RC_MAP_DVBSKY) },
+	{ DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230,
+		&mygica_t230c_props, "MyGica Mini DVB-T2 USB Stick T230",
+		RC_MAP_TOTAL_MEDIA_IN_HAND_02) },
 	{ DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230C,
 		&mygica_t230c_props, "MyGica Mini DVB-T2 USB Stick T230C",
 		RC_MAP_TOTAL_MEDIA_IN_HAND_02) },