Merge tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - qcom-wdt dt-bindings improvements and additions (like MSM8994 and
   MDM9615)

 - mtk_wdt: Add reset_by_toprgu support

 - devm_clk_get_enabled() helper changes

 - Fix kmemleak in watchdog_cdev_register

 - watchdog sysfs improvements

 - Other fixes and small improvements

* tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits)
  watchdog: at91rm9200: Only warn once about problems in .remove()
  watchdog: mt7621-wdt: avoid ralink architecture dependent code
  watchdog: mt7621-wdt: avoid static global declarations
  dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers
  watchdog: sbsa_wdog: Make sure the timeout programming is within the limits
  dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
  watchdog: report options in sysfs
  watchdog: report fw_version in sysfs
  dt-bindings: watchdog: fsl-imx: document suspend in wait mode
  watchdog: imx2_wdg: suspend watchdog in WAIT mode
  watchdog: pcwd_usb: Fix attempting to access uninitialized memory
  dt-bindings: watchdog: qcom-wdt: merge MSM timer
  dt-bindings: watchdog: qcom-wdt: allow interrupts
  dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
  dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
  dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
  dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
  watchdog: Fix kmemleak in watchdog_cdev_register
  watchdog: Include <linux/kstrtox.h> when appropriate
  watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
  ...

Documentation/ABI/testing/sysfs-class-watchdog

@@ -6,6 +6,19 @@ Description:
 		device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
 		ioctl interface.
 
+What:		/sys/class/watchdog/watchdogn/options
+Date:		April 2023
+Contact:	Thomas Weißschuh
+Description:
+		It is a read only file. It contains options of watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/fw_version
+Date:		April 2023
+Contact:	Thomas Weißschuh
+Description:
+		It is a read only file. It contains firmware version of
+		watchdog device.
+
 What:		/sys/class/watchdog/watchdogn/identity
 Date:		August 2015
 Contact:	Wim Van Sebroeck <wim@iguana.be>

Documentation/devicetree/bindings/timer/qcom,msm-timer.txt

-* MSM Timer
-
-Properties:
-
-- compatible : Should at least contain "qcom,msm-timer". More specific
-               properties specify which subsystem the timers are paired with.
-
-               "qcom,kpss-timer" - krait subsystem
-               "qcom,scss-timer" - scorpion subsystem
-
-- interrupts : Interrupts for the debug timer, the first general purpose
-               timer, and optionally a second general purpose timer, and
-               optionally as well, 2 watchdog interrupts, in that order.
-
-- reg : Specifies the base address of the timer registers.
-
-- clocks: Reference to the parent clocks, one per output clock. The parents
-          must appear in the same order as the clock names.
-
-- clock-names: The name of the clocks as free-form strings. They should be in
-               the same order as the clocks.
-
-- clock-frequency : The frequency of the debug timer and the general purpose
-                    timer(s) in Hz in that order.
-
-Optional:
-
-- cpu-offset : per-cpu offset used when the timer is accessed without the
-               CPU remapping facilities. The offset is
-               cpu-offset + (0x10000 * cpu-nr).
-
-Example:
-
-       timer@200a000 {
-               compatible = "qcom,scss-timer", "qcom,msm-timer";
-               interrupts = <1 1 0x301>,
-                            <1 2 0x301>,
-                            <1 3 0x301>,
-                            <1 4 0x301>,
-                            <1 5 0x301>;
-               reg = <0x0200a000 0x100>;
-               clock-frequency = <19200000>,
-                                 <32768>;
-               clocks = <&sleep_clk>;
-               clock-names = "sleep";
-               cpu-offset = <0x40000>;
-       };

Documentation/devicetree/bindings/watchdog/amlogic,meson6-wdt.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/amlogic,meson6-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 SoCs Watchdog timer
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson6-wdt
+          - amlogic,meson8-wdt
+          - amlogic,meson8b-wdt
+      - items:
+          - const: amlogic,meson8m2-wdt
+          - const: amlogic,meson8b-wdt
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    wdt: watchdog@c1109900 {
+        compatible = "amlogic,meson6-wdt";
+        reg = <0xc1109900 0x8>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+        timeout-sec = <10>;
+    };

Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml

@@ -9,9 +9,6 @@ title: Freescale i.MX Watchdog Timer (WDT) Controller
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
 
-allOf:
-  - $ref: "watchdog.yaml#"
-
 properties:
   compatible:
     oneOf:
@@ -55,11 +52,45 @@ properties:
       If present, the watchdog device is configured to assert its
       external reset (WDOG_B) instead of issuing a software reset.
 
+  fsl,suspend-in-wait:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      If present, the watchdog device is suspended in WAIT mode
+      (Suspend-to-Idle). Only supported on certain devices.
+
 required:
   - compatible
   - interrupts
   - reg
 
+allOf:
+  - $ref: watchdog.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx25-wdt
+                - fsl,imx35-wdt
+                - fsl,imx50-wdt
+                - fsl,imx51-wdt
+                - fsl,imx53-wdt
+                - fsl,imx6q-wdt
+                - fsl,imx6sl-wdt
+                - fsl,imx6sll-wdt
+                - fsl,imx6sx-wdt
+                - fsl,imx6ul-wdt
+                - fsl,imx7d-wdt
+                - fsl,imx8mm-wdt
+                - fsl,imx8mn-wdt
+                - fsl,imx8mp-wdt
+                - fsl,imx8mq-wdt
+                - fsl,vf610-wdt
+    then:
+      properties:
+        fsl,suspend-in-wait: false
+
 unevaluatedProperties: false
 
 examples:

Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/gpio-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled watchdog
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  compatible:
+    const: linux,wdt-gpio
+
+  gpios:
+    maxItems: 1
+    description: GPIO connected to the WDT reset pin
+
+  hw_algo:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Algorithm used by the driver
+    oneOf:
+      - description:
+          Either a high-to-low or a low-to-high transition clears the WDT counter.
+          The watchdog timer is disabled when GPIO is left floating or connected
+          to a three-state buffer.
+        const: toggle
+      - description:
+          Low or high level starts counting WDT timeout, the opposite level
+          disables the WDT.
+          Active level is determined by the GPIO flags.
+        const: level
+
+  hw_margin_ms:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum time to reset watchdog circuit (in milliseconds)
+    minimum: 2
+    maximum: 65535
+
+  always-running:
+    type: boolean
+    description:
+      If the watchdog timer cannot be disabled, add this flag to have the driver
+      keep toggling the signal without a client.
+      It will only cease to toggle the signal when the device is open and the
+      timeout elapsed.
+
+required:
+  - compatible
+  - gpios
+  - hw_algo
+  - hw_margin_ms
+
+unevaluatedProperties: false

Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml

@@ -19,6 +19,12 @@ properties:
   reg:
     maxItems: 1
 
+  mediatek,sysctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to system controller 'sysc' syscon node which
+      controls system registers
+
 required:
   - compatible
   - reg
@@ -30,4 +36,5 @@ examples:
     watchdog@100 {
       compatible = "mediatek,mt7621-wdt";
       reg = <0x100 0x100>;
+      mediatek,sysctl = <&sysc>;
     };

Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml

@@ -52,6 +52,12 @@ properties:
     description: Disable sending output reset signal
     type: boolean
 
+  mediatek,reset-by-toprgu:
+    description: The Top Reset Generation Unit (TOPRGU) generates reset signals
+      and distributes them to each IP. If present, the watchdog timer will be
+      reset by TOPRGU once system resets.
+    type: boolean
+
   '#reset-cells':
     const: 1
 

Documentation/devicetree/bindings/watchdog/meson-wdt.txt

-Meson SoCs Watchdog timer
-
-Required properties:
-
-- compatible : depending on the SoC this should be one of:
-	"amlogic,meson6-wdt" on Meson6 SoCs
-	"amlogic,meson8-wdt" and "amlogic,meson6-wdt" on Meson8 SoCs
-	"amlogic,meson8b-wdt" on Meson8b SoCs
-	"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-Example:
-
-wdt: watchdog@c1109900 {
-	compatible = "amlogic,meson6-wdt";
-	reg = <0xc1109900 0x8>;
-	timeout-sec = <10>;
-};

Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml

@@ -9,15 +9,18 @@ title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer
 maintainers:
   - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
 
-allOf:
-  - $ref: watchdog.yaml#
-
 properties:
+  $nodename:
+    pattern: "^(watchdog|timer)@[0-9a-f]+$"
+
   compatible:
     oneOf:
       - items:
           - enum:
+              - qcom,kpss-wdt-ipq4019
+              - qcom,apss-wdt-msm8994
               - qcom,apss-wdt-qcs404
+              - qcom,apss-wdt-sa8775p
               - qcom,apss-wdt-sc7180
               - qcom,apss-wdt-sc7280
               - qcom,apss-wdt-sc8180x
@@ -29,15 +32,19 @@ properties:
               - qcom,apss-wdt-sm8150
               - qcom,apss-wdt-sm8250
           - const: qcom,kpss-wdt
+      - const: qcom,kpss-wdt
+        deprecated: true
+      - items:
+          - const: qcom,scss-timer
+          - const: qcom,msm-timer
       - items:
           - enum:
-              - qcom,kpss-wdt
-              - qcom,kpss-timer
               - qcom,kpss-wdt-apq8064
-              - qcom,kpss-wdt-ipq4019
               - qcom,kpss-wdt-ipq8064
+              - qcom,kpss-wdt-mdm9615
               - qcom,kpss-wdt-msm8960
-              - qcom,scss-timer
+          - const: qcom,kpss-timer
+          - const: qcom,msm-timer
 
   reg:
     maxItems: 1
@@ -45,18 +52,87 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: sleep
+
+  clock-frequency:
+    description:
+      The frequency of the general purpose timer in Hz.
+
+  cpu-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Per-CPU offset used when the timer is accessed without the CPU remapping
+      facilities. The offset is cpu-offset + (0x10000 * cpu-nr).
+
+  interrupts:
+    minItems: 1
+    maxItems: 5
+
 required:
   - compatible
   - reg
   - clocks
 
+allOf:
+  - $ref: watchdog.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,kpss-wdt
+    then:
+      properties:
+        clock-frequency: false
+        cpu-offset: false
+        interrupts:
+          minItems: 1
+          items:
+            - description: Bark
+            - description: Bite
+
+    else:
+      properties:
+        interrupts:
+          minItems: 3
+          items:
+            - description: Debug
+            - description: First general purpose timer
+            - description: Second general purpose timer
+            - description: First watchdog
+            - description: Second watchdog
+      required:
+        - clock-frequency
+
 unevaluatedProperties: false
 
 examples:
   - |
-    watchdog@208a038 {
-      compatible = "qcom,kpss-wdt-ipq8064";
-      reg = <0x0208a038 0x40>;
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@17c10000 {
+      compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
+      reg = <0x17c10000 0x1000>;
       clocks = <&sleep_clk>;
+      interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
       timeout-sec = <10>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@200a000 {
+      compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", "qcom,msm-timer";
+      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+      reg = <0x0200a000 0x100>;
+      clock-frequency = <25000000>;
+      clocks = <&sleep_clk>;
+      clock-names = "sleep";
+      cpu-offset = <0x80000>;
+    };

Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml

@@ -26,7 +26,7 @@ properties:
 
       - items:
           - enum:
-              - renesas,r9a07g043-wdt    # RZ/G2UL
+              - renesas,r9a07g043-wdt    # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-wdt    # RZ/G2{L,LC}
               - renesas,r9a07g054-wdt    # RZ/V2L
           - const: renesas,rzg2l-wdt

Documentation/devicetree/bindings/watchdog/watchdog.yaml

@@ -14,10 +14,15 @@ description: |
   This document describes generic bindings which can be used to
   describe watchdog devices in a device tree.
 
-properties:
+select:
+  properties:
     $nodename:
       pattern: "^watchdog(@.*|-[0-9a-f])?$"
 
+properties:
+  $nodename:
+    pattern: "^(timer|watchdog)(@.*|-[0-9a-f])?$"
+
   timeout-sec:
     description:
       Contains the watchdog timeout in seconds.

drivers/watchdog/Kconfig

@@ -1871,7 +1871,9 @@ config GXP_WATCHDOG
 config MT7621_WDT
 	tristate "Mediatek SoC watchdog"
 	select WATCHDOG_CORE
-	depends on SOC_MT7620 || SOC_MT7621
+	select REGMAP_MMIO
+	select MFD_SYSCON
+	depends on SOC_MT7620 || SOC_MT7621 || COMPILE_TEST
 	help
 	  Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
 

drivers/watchdog/apple_wdt.c

@@ -136,11 +136,6 @@ static int apple_wdt_restart(struct watchdog_device *wdd, unsigned long mode,
 	return 0;
 }
 
-static void apple_wdt_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static struct watchdog_ops apple_wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = apple_wdt_start,
@@ -162,7 +157,6 @@ static int apple_wdt_probe(struct platform_device *pdev)
 	struct apple_wdt *wdt;
 	struct clk *clk;
 	u32 wdt_ctrl;
-	int ret;
 
 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 	if (!wdt)
@@ -172,19 +166,9 @@ static int apple_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->regs))
 		return PTR_ERR(wdt->regs);
 
-	clk = devm_clk_get(dev, NULL);
+	clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
-
-	ret = clk_prepare_enable(clk);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(dev, apple_wdt_clk_disable_unprepare,
-				       clk);
-	if (ret)
-		return ret;
-
 	wdt->clk_rate = clk_get_rate(clk);
 	if (!wdt->clk_rate)
 		return -EINVAL;

drivers/watchdog/armada_37xx_wdt.c

@@ -246,11 +246,6 @@ static const struct watchdog_ops armada_37xx_wdt_ops = {
 	.get_timeleft = armada_37xx_wdt_get_timeleft,
 };
 
-static void armada_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int armada_37xx_wdt_probe(struct platform_device *pdev)
 {
 	struct armada_37xx_watchdog *dev;
@@ -280,18 +275,10 @@ static int armada_37xx_wdt_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* init clock */
-	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
 
-	ret = clk_prepare_enable(dev->clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(&pdev->dev,
-				       armada_clk_disable_unprepare, dev->clk);
-	if (ret)
-		return ret;
-
 	dev->clk_rate = clk_get_rate(dev->clk);
 	if (!dev->clk_rate)
 		return -EINVAL;

drivers/watchdog/aspeed_wdt.c

@@ -10,6 +10,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/kstrtox.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>

drivers/watchdog/at91rm9200_wdt.c

@@ -270,7 +270,7 @@ static int at91wdt_remove(struct platform_device *pdev)
 	misc_deregister(&at91wdt_miscdev);
 	at91wdt_miscdev.parent = NULL;
 
-	return res;
+	return 0;
 }
 
 static void at91wdt_shutdown(struct platform_device *pdev)

drivers/watchdog/at91sam9_wdt.c

@@ -206,9 +206,8 @@ static int at91_wdt_init(struct platform_device *pdev, struct at91wdt *wdt)
 			 "min heartbeat and max heartbeat might be too close for the system to handle it correctly\n");
 
 	if ((tmp & AT91_WDT_WDFIEN) && wdt->irq) {
-		err = request_irq(wdt->irq, wdt_interrupt,
-				  IRQF_SHARED | IRQF_IRQPOLL |
-				  IRQF_NO_SUSPEND,
+		err = devm_request_irq(dev, wdt->irq, wdt_interrupt,
+				       IRQF_SHARED | IRQF_IRQPOLL | IRQF_NO_SUSPEND,
 				       pdev->name, wdt);
 		if (err)
 			return err;

drivers/watchdog/bcm7038_wdt.c

@@ -127,11 +127,6 @@ static const struct watchdog_ops bcm7038_wdt_ops = {
 	.get_timeleft	= bcm7038_wdt_get_timeleft,
 };
 
-static void bcm7038_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int bcm7038_wdt_probe(struct platform_device *pdev)
 {
 	struct bcm7038_wdt_platform_data *pdata = pdev->dev.platform_data;
@@ -153,17 +148,9 @@ static int bcm7038_wdt_probe(struct platform_device *pdev)
 	if (pdata && pdata->clk_name)
 		clk_name = pdata->clk_name;
 
-	wdt->clk = devm_clk_get(dev, clk_name);
+	wdt->clk = devm_clk_get_enabled(dev, clk_name);
 	/* If unable to get clock, use default frequency */
 	if (!IS_ERR(wdt->clk)) {
-		err = clk_prepare_enable(wdt->clk);
-		if (err)
-			return err;
-		err = devm_add_action_or_reset(dev,
-					       bcm7038_clk_disable_unprepare,
-					       wdt->clk);
-		if (err)
-			return err;
 		wdt->rate = clk_get_rate(wdt->clk);
 		/* Prevent divide-by-zero exception */
 		if (!wdt->rate)

drivers/watchdog/cadence_wdt.c

@@ -274,11 +274,6 @@ static const struct watchdog_ops cdns_wdt_ops = {
 	.set_timeout = cdns_wdt_settimeout,
 };
 
-static void cdns_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 /************************Platform Operations*****************************/
 /**
  * cdns_wdt_probe - Probe call for the device.
@@ -333,21 +328,11 @@ static int cdns_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_reboot(cdns_wdt_device);
 	watchdog_set_drvdata(cdns_wdt_device, wdt);
 
-	wdt->clk = devm_clk_get(dev, NULL);
+	wdt->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(wdt->clk))
 		return dev_err_probe(dev, PTR_ERR(wdt->clk),
 				     "input clock not found\n");
 
-	ret = clk_prepare_enable(wdt->clk);
-	if (ret) {
-		dev_err(dev, "unable to enable clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, cdns_clk_disable_unprepare,
-				       wdt->clk);
-	if (ret)
-		return ret;
-
 	clock_f = clk_get_rate(wdt->clk);
 	if (clock_f <= CDNS_WDT_CLK_75MHZ) {
 		wdt->prescaler = CDNS_WDT_PRESCALE_512;

drivers/watchdog/da9062_wdt.c

@@ -155,11 +155,20 @@ static int da9062_wdt_restart(struct watchdog_device *wdd, unsigned long action,
 {
 	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
 	struct i2c_client *client = to_i2c_client(wdt->hw->dev);
+	union i2c_smbus_data msg;
 	int ret;
 
-	/* Don't use regmap because it is not atomic safe */
-	ret = i2c_smbus_write_byte_data(client, DA9062AA_CONTROL_F,
-					DA9062AA_SHUTDOWN_MASK);
+	/*
+	 * Don't use regmap because it is not atomic safe. Additionally, use
+	 * unlocked flavor of i2c_smbus_xfer to avoid scenario where i2c bus
+	 * might be previously locked by some process unable to release the
+	 * lock due to interrupts already being disabled at this late stage.
+	 */
+	msg.byte = DA9062AA_SHUTDOWN_MASK;
+	ret = __i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			       I2C_SMBUS_WRITE, DA9062AA_CONTROL_F,
+			       I2C_SMBUS_BYTE_DATA, &msg);
+
 	if (ret < 0)
 		dev_alert(wdt->hw->dev, "Failed to shutdown (err = %d)\n",
 			  ret);

drivers/watchdog/da9063_wdt.c

@@ -174,11 +174,20 @@ static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action,
 {
 	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
 	struct i2c_client *client = to_i2c_client(da9063->dev);
+	union i2c_smbus_data msg;
 	int ret;
 
-	/* Don't use regmap because it is not atomic safe */
-	ret = i2c_smbus_write_byte_data(client, DA9063_REG_CONTROL_F,
-					DA9063_SHUTDOWN);
+	/*
+	 * Don't use regmap because it is not atomic safe. Additionally, use
+	 * unlocked flavor of i2c_smbus_xfer to avoid scenario where i2c bus
+	 * might previously be locked by some process unable to release the
+	 * lock due to interrupts already being disabled at this late stage.
+	 */
+	msg.byte = DA9063_SHUTDOWN;
+	ret = __i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			I2C_SMBUS_WRITE, DA9063_REG_CONTROL_F,
+			I2C_SMBUS_BYTE_DATA, &msg);
+
 	if (ret < 0)
 		dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n",
 			  ret);

drivers/watchdog/davinci_wdt.c

@@ -189,14 +189,8 @@ static const struct watchdog_ops davinci_wdt_ops = {
 	.restart	= davinci_wdt_restart,
 };
 
-static void davinci_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int davinci_wdt_probe(struct platform_device *pdev)
 {
-	int ret = 0;
 	struct device *dev = &pdev->dev;
 	struct watchdog_device *wdd;
 	struct davinci_wdt_device *davinci_wdt;
@@ -205,21 +199,11 @@ static int davinci_wdt_probe(struct platform_device *pdev)
 	if (!davinci_wdt)
 		return -ENOMEM;
 
-	davinci_wdt->clk = devm_clk_get(dev, NULL);
+	davinci_wdt->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(davinci_wdt->clk))
 		return dev_err_probe(dev, PTR_ERR(davinci_wdt->clk),
 				     "failed to get clock node\n");
 
-	ret = clk_prepare_enable(davinci_wdt->clk);
-	if (ret) {
-		dev_err(dev, "failed to prepare clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, davinci_clk_disable_unprepare,
-				       davinci_wdt->clk);
-	if (ret)
-		return ret;
-
 	platform_set_drvdata(pdev, davinci_wdt);
 
 	wdd			= &davinci_wdt->wdd;

drivers/watchdog/dw_wdt.c

@@ -663,6 +663,7 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dw_wdt);
 
 	watchdog_set_restart_priority(wdd, 128);
+	watchdog_stop_on_reboot(wdd);
 
 	ret = watchdog_register_device(wdd);
 	if (ret)

drivers/watchdog/iTCO_wdt.c

@@ -441,11 +441,10 @@ static bool iTCO_wdt_set_running(struct iTCO_wdt_private *p)
  *	Kernel Interfaces
  */
 
-static const struct watchdog_info ident = {
+static struct watchdog_info ident = {
 	.options =		WDIOF_SETTIMEOUT |
 				WDIOF_KEEPALIVEPING |
 				WDIOF_MAGICCLOSE,
-	.firmware_version =	0,
 	.identity =		DRV_NAME,
 };
 
@@ -563,6 +562,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 		break;
 	}
 
+	ident.firmware_version = p->iTCO_version;
 	p->wddev.info = &ident,
 	p->wddev.ops = &iTCO_wdt_ops,
 	p->wddev.bootstatus = 0;

drivers/watchdog/imgpdc_wdt.c

@@ -175,16 +175,11 @@ static const struct watchdog_ops pdc_wdt_ops = {
 	.restart        = pdc_wdt_restart,
 };
 
-static void pdc_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int pdc_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	u64 div;
-	int ret, val;
+	int val;
 	unsigned long clk_rate;
 	struct pdc_wdt_dev *pdc_wdt;
 
@@ -196,38 +191,18 @@ static int pdc_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(pdc_wdt->base))
 		return PTR_ERR(pdc_wdt->base);
 
-	pdc_wdt->sys_clk = devm_clk_get(dev, "sys");
+	pdc_wdt->sys_clk = devm_clk_get_enabled(dev, "sys");
 	if (IS_ERR(pdc_wdt->sys_clk)) {
 		dev_err(dev, "failed to get the sys clock\n");
 		return PTR_ERR(pdc_wdt->sys_clk);
 	}
 
-	pdc_wdt->wdt_clk = devm_clk_get(dev, "wdt");
+	pdc_wdt->wdt_clk = devm_clk_get_enabled(dev, "wdt");
 	if (IS_ERR(pdc_wdt->wdt_clk)) {
 		dev_err(dev, "failed to get the wdt clock\n");
 		return PTR_ERR(pdc_wdt->wdt_clk);
 	}
 
-	ret = clk_prepare_enable(pdc_wdt->sys_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable sys clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
-				       pdc_wdt->sys_clk);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(pdc_wdt->wdt_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable wdt clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
-				       pdc_wdt->wdt_clk);
-	if (ret)
-		return ret;
-
 	/* We use the clock rate to calculate the max timeout */
 	clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
 	if (clk_rate == 0) {

drivers/watchdog/imx2_wdt.c

@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/watchdog.h>
@@ -35,6 +36,7 @@
 
 #define IMX2_WDT_WCR		0x00		/* Control Register */
 #define IMX2_WDT_WCR_WT		(0xFF << 8)	/* -> Watchdog Timeout Field */
+#define IMX2_WDT_WCR_WDW	BIT(7)		/* -> Watchdog disable for WAIT */
 #define IMX2_WDT_WCR_WDA	BIT(5)		/* -> External Reset WDOG_B */
 #define IMX2_WDT_WCR_SRS	BIT(4)		/* -> Software Reset Signal */
 #define IMX2_WDT_WCR_WRE	BIT(3)		/* -> WDOG Reset Enable */
@@ -60,13 +62,19 @@
 
 #define WDOG_SEC_TO_COUNT(s)	((s * 2 - 1) << 8)
 
+struct imx2_wdt_data {
+	bool wdw_supported;
+};
+
 struct imx2_wdt_device {
 	struct clk *clk;
 	struct regmap *regmap;
 	struct watchdog_device wdog;
+	const struct imx2_wdt_data *data;
 	bool ext_reset;
 	bool clk_is_on;
 	bool no_ping;
+	bool sleep_wait;
 };
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -129,6 +137,9 @@ static inline void imx2_wdt_setup(struct watchdog_device *wdog)
 
 	/* Suspend timer in low power mode, write once-only */
 	val |= IMX2_WDT_WCR_WDZST;
+	/* Suspend timer in low power WAIT mode, write once-only */
+	if (wdev->sleep_wait)
+		val |= IMX2_WDT_WCR_WDW;
 	/* Strip the old watchdog Time-Out value */
 	val &= ~IMX2_WDT_WCR_WT;
 	/* Generate internal chip-level reset if WDOG times out */
@@ -292,6 +303,8 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	wdog->max_hw_heartbeat_ms = IMX2_WDT_MAX_TIME * 1000;
 	wdog->parent		= dev;
 
+	wdev->data = of_device_get_match_data(dev);
+
 	ret = platform_get_irq(pdev, 0);
 	if (ret > 0)
 		if (!devm_request_irq(dev, ret, imx2_wdt_isr, 0,
@@ -313,9 +326,18 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 
 	wdev->ext_reset = of_property_read_bool(dev->of_node,
 						"fsl,ext-reset-output");
+
+	if (of_property_read_bool(dev->of_node, "fsl,suspend-in-wait")) {
+		if (!wdev->data->wdw_supported) {
+			dev_err(dev, "suspend-in-wait not supported\n");
+			return -EINVAL;
+		}
+		wdev->sleep_wait = true;
+	}
+
 	/*
 	 * The i.MX7D doesn't support low power mode, so we need to ping the watchdog
-	 * during suspend.
+	 * during suspend. Interaction with "fsl,suspend-in-wait" is unknown!
 	 */
 	wdev->no_ping = !of_device_is_compatible(dev->of_node, "fsl,imx7d-wdt");
 	platform_set_drvdata(pdev, wdog);
@@ -417,9 +439,36 @@ static int __maybe_unused imx2_wdt_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(imx2_wdt_pm_ops, imx2_wdt_suspend,
 			 imx2_wdt_resume);
 
+struct imx2_wdt_data imx_wdt = {
+	.wdw_supported = true,
+};
+
+struct imx2_wdt_data imx_wdt_legacy = {
+	.wdw_supported = false,
+};
+
 static const struct of_device_id imx2_wdt_dt_ids[] = {
-	{ .compatible = "fsl,imx21-wdt", },
-	{ .compatible = "fsl,imx7d-wdt", },
+	{ .compatible = "fsl,imx21-wdt", .data = &imx_wdt_legacy },
+	{ .compatible = "fsl,imx25-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx27-wdt", .data = &imx_wdt_legacy },
+	{ .compatible = "fsl,imx31-wdt", .data = &imx_wdt_legacy },
+	{ .compatible = "fsl,imx35-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx50-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx51-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx53-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx6q-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx6sl-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx6sll-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx6sx-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx6ul-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx7d-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx8mm-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx8mn-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx8mp-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,imx8mq-wdt", .data = &imx_wdt },
+	{ .compatible = "fsl,ls1012a-wdt", .data = &imx_wdt_legacy },
+	{ .compatible = "fsl,ls1043a-wdt", .data = &imx_wdt_legacy },
+	{ .compatible = "fsl,vf610-wdt", .data = &imx_wdt },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids);

drivers/watchdog/imx7ulp_wdt.c

@@ -299,11 +299,6 @@ static int imx7ulp_wdt_init(struct imx7ulp_wdt_device *wdt, unsigned int timeout
 	return ret;
 }
 
-static void imx7ulp_wdt_action(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int imx7ulp_wdt_probe(struct platform_device *pdev)
 {
 	struct imx7ulp_wdt_device *imx7ulp_wdt;
@@ -321,7 +316,7 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(imx7ulp_wdt->base))
 		return PTR_ERR(imx7ulp_wdt->base);
 
-	imx7ulp_wdt->clk = devm_clk_get(dev, NULL);
+	imx7ulp_wdt->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(imx7ulp_wdt->clk)) {
 		dev_err(dev, "Failed to get watchdog clock\n");
 		return PTR_ERR(imx7ulp_wdt->clk);
@@ -336,14 +331,6 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
 		dev_info(dev, "imx7ulp wdt probe\n");
 	}
 
-	ret = clk_prepare_enable(imx7ulp_wdt->clk);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(dev, imx7ulp_wdt_action, imx7ulp_wdt->clk);
-	if (ret)
-		return ret;
-
 	wdog = &imx7ulp_wdt->wdd;
 	wdog->info = &imx7ulp_wdt_info;
 	wdog->ops = &imx7ulp_wdt_ops;

drivers/watchdog/lpc18xx_wdt.c

@@ -197,16 +197,10 @@ static const struct watchdog_ops lpc18xx_wdt_ops = {
 	.restart        = lpc18xx_wdt_restart,
 };
 
-static void lpc18xx_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int lpc18xx_wdt_probe(struct platform_device *pdev)
 {
 	struct lpc18xx_wdt_dev *lpc18xx_wdt;
 	struct device *dev = &pdev->dev;
-	int ret;
 
 	lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL);
 	if (!lpc18xx_wdt)
@@ -216,38 +210,18 @@ static int lpc18xx_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(lpc18xx_wdt->base))
 		return PTR_ERR(lpc18xx_wdt->base);
 
-	lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg");
+	lpc18xx_wdt->reg_clk = devm_clk_get_enabled(dev, "reg");
 	if (IS_ERR(lpc18xx_wdt->reg_clk)) {
 		dev_err(dev, "failed to get the reg clock\n");
 		return PTR_ERR(lpc18xx_wdt->reg_clk);
 	}
 
-	lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk");
+	lpc18xx_wdt->wdt_clk = devm_clk_get_enabled(dev, "wdtclk");
 	if (IS_ERR(lpc18xx_wdt->wdt_clk)) {
 		dev_err(dev, "failed to get the wdt clock\n");
 		return PTR_ERR(lpc18xx_wdt->wdt_clk);
 	}
 
-	ret = clk_prepare_enable(lpc18xx_wdt->reg_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable sys clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare,
-				       lpc18xx_wdt->reg_clk);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable wdt clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare,
-				       lpc18xx_wdt->wdt_clk);
-	if (ret)
-		return ret;
-
 	/* We use the clock rate to calculate timeouts */
 	lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk);
 	if (lpc18xx_wdt->clk_rate == 0) {

drivers/watchdog/meson_gxbb_wdt.c

@@ -146,16 +146,10 @@ static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
 
-static void meson_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct meson_gxbb_wdt *data;
-	int ret;
 	u32 ctrl_reg;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
@@ -166,18 +160,10 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(data->reg_base))
 		return PTR_ERR(data->reg_base);
 
-	data->clk = devm_clk_get(dev, NULL);
+	data->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(data->clk))
 		return PTR_ERR(data->clk);
 
-	ret = clk_prepare_enable(data->clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(dev, meson_clk_disable_unprepare,
-				       data->clk);
-	if (ret)
-		return ret;
-
 	platform_set_drvdata(pdev, data);
 
 	data->wdt_dev.parent = dev;

drivers/watchdog/mt7621_wdt.c

@@ -15,8 +15,8 @@
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
 #include <linux/mod_devicetable.h>
-
-#include <asm/mach-ralink/ralink_regs.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define SYSC_RSTSTAT			0x38
 #define WDT_RST_CAUSE			BIT(1)
@@ -31,8 +31,12 @@
 #define TMR1CTL_RESTART			BIT(9)
 #define TMR1CTL_PRESCALE_SHIFT		16
 
-static void __iomem *mt7621_wdt_base;
-static struct reset_control *mt7621_wdt_reset;
+struct mt7621_wdt_data {
+	void __iomem *base;
+	struct reset_control *rst;
+	struct regmap *sysc;
+	struct watchdog_device wdt;
+};
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, bool, 0);
@@ -40,27 +44,31 @@ MODULE_PARM_DESC(nowayout,
 		 "Watchdog cannot be stopped once started (default="
 		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
-static inline void rt_wdt_w32(unsigned reg, u32 val)
+static inline void rt_wdt_w32(void __iomem *base, unsigned int reg, u32 val)
 {
-	iowrite32(val, mt7621_wdt_base + reg);
+	iowrite32(val, base + reg);
 }
 
-static inline u32 rt_wdt_r32(unsigned reg)
+static inline u32 rt_wdt_r32(void __iomem *base, unsigned int reg)
 {
-	return ioread32(mt7621_wdt_base + reg);
+	return ioread32(base + reg);
 }
 
 static int mt7621_wdt_ping(struct watchdog_device *w)
 {
-	rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
+	struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
+
+	rt_wdt_w32(drvdata->base, TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
 
 	return 0;
 }
 
 static int mt7621_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
 {
+	struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
+
 	w->timeout = t;
-	rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
+	rt_wdt_w32(drvdata->base, TIMER_REG_TMR1LOAD, t * 1000);
 	mt7621_wdt_ping(w);
 
 	return 0;
@@ -68,36 +76,41 @@ static int mt7621_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
 
 static int mt7621_wdt_start(struct watchdog_device *w)
 {
+	struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
 	u32 t;
 
 	/* set the prescaler to 1ms == 1000us */
-	rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT);
+	rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT);
 
 	mt7621_wdt_set_timeout(w, w->timeout);
 
-	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+	t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL);
 	t |= TMR1CTL_ENABLE;
-	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+	rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t);
 
 	return 0;
 }
 
 static int mt7621_wdt_stop(struct watchdog_device *w)
 {
+	struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
 	u32 t;
 
 	mt7621_wdt_ping(w);
 
-	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+	t = rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL);
 	t &= ~TMR1CTL_ENABLE;
-	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+	rt_wdt_w32(drvdata->base, TIMER_REG_TMR1CTL, t);
 
 	return 0;
 }
 
-static int mt7621_wdt_bootcause(void)
+static int mt7621_wdt_bootcause(struct mt7621_wdt_data *d)
 {
-	if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
+	u32 val;
+
+	regmap_read(d->sysc, SYSC_RSTSTAT, &val);
+	if (val & WDT_RST_CAUSE)
 		return WDIOF_CARDRESET;
 
 	return 0;
@@ -105,7 +118,9 @@ static int mt7621_wdt_bootcause(void)
 
 static int mt7621_wdt_is_running(struct watchdog_device *w)
 {
-	return !!(rt_wdt_r32(TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE);
+	struct mt7621_wdt_data *drvdata = watchdog_get_drvdata(w);
+
+	return !!(rt_wdt_r32(drvdata->base, TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE);
 }
 
 static const struct watchdog_info mt7621_wdt_info = {
@@ -121,30 +136,47 @@ static const struct watchdog_ops mt7621_wdt_ops = {
 	.set_timeout = mt7621_wdt_set_timeout,
 };
 
-static struct watchdog_device mt7621_wdt_dev = {
-	.info = &mt7621_wdt_info,
-	.ops = &mt7621_wdt_ops,
-	.min_timeout = 1,
-	.max_timeout = 0xfffful / 1000,
-};
-
 static int mt7621_wdt_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
-	mt7621_wdt_base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(mt7621_wdt_base))
-		return PTR_ERR(mt7621_wdt_base);
+	struct watchdog_device *mt7621_wdt;
+	struct mt7621_wdt_data *drvdata;
+	int err;
+
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->sysc = syscon_regmap_lookup_by_phandle(np, "mediatek,sysctl");
+	if (IS_ERR(drvdata->sysc)) {
+		drvdata->sysc = syscon_regmap_lookup_by_compatible("mediatek,mt7621-sysc");
+		if (IS_ERR(drvdata->sysc))
+			return PTR_ERR(drvdata->sysc);
+	}
+
+	drvdata->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(drvdata->base))
+		return PTR_ERR(drvdata->base);
+
+	drvdata->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (!IS_ERR(drvdata->rst))
+		reset_control_deassert(drvdata->rst);
+
+	mt7621_wdt = &drvdata->wdt;
+	mt7621_wdt->info = &mt7621_wdt_info;
+	mt7621_wdt->ops = &mt7621_wdt_ops;
+	mt7621_wdt->min_timeout = 1;
+	mt7621_wdt->max_timeout = 0xfffful / 1000;
+	mt7621_wdt->parent = dev;
 
-	mt7621_wdt_reset = devm_reset_control_get_exclusive(dev, NULL);
-	if (!IS_ERR(mt7621_wdt_reset))
-		reset_control_deassert(mt7621_wdt_reset);
+	mt7621_wdt->bootstatus = mt7621_wdt_bootcause(drvdata);
 
-	mt7621_wdt_dev.bootstatus = mt7621_wdt_bootcause();
+	watchdog_init_timeout(mt7621_wdt, mt7621_wdt->max_timeout, dev);
+	watchdog_set_nowayout(mt7621_wdt, nowayout);
+	watchdog_set_drvdata(mt7621_wdt, drvdata);
 
-	watchdog_init_timeout(&mt7621_wdt_dev, mt7621_wdt_dev.max_timeout,
-			      dev);
-	watchdog_set_nowayout(&mt7621_wdt_dev, nowayout);
-	if (mt7621_wdt_is_running(&mt7621_wdt_dev)) {
+	if (mt7621_wdt_is_running(mt7621_wdt)) {
 		/*
 		 * Make sure to apply timeout from watchdog core, taking
 		 * the prescaler of this driver here into account (the
@@ -154,17 +186,25 @@ static int mt7621_wdt_probe(struct platform_device *pdev)
 		 * we first disable the watchdog, set the new prescaler
 		 * and timeout, and then re-enable the watchdog.
 		 */
-		mt7621_wdt_stop(&mt7621_wdt_dev);
-		mt7621_wdt_start(&mt7621_wdt_dev);
-		set_bit(WDOG_HW_RUNNING, &mt7621_wdt_dev.status);
+		mt7621_wdt_stop(mt7621_wdt);
+		mt7621_wdt_start(mt7621_wdt);
+		set_bit(WDOG_HW_RUNNING, &mt7621_wdt->status);
 	}
 
-	return devm_watchdog_register_device(dev, &mt7621_wdt_dev);
+	err = devm_watchdog_register_device(dev, &drvdata->wdt);
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
 }
 
 static void mt7621_wdt_shutdown(struct platform_device *pdev)
 {
-	mt7621_wdt_stop(&mt7621_wdt_dev);
+	struct mt7621_wdt_data *drvdata = platform_get_drvdata(pdev);
+
+	mt7621_wdt_stop(&drvdata->wdt);
 }
 
 static const struct of_device_id mt7621_wdt_match[] = {

drivers/watchdog/mtk_wdt.c

@@ -50,6 +50,7 @@
 #define WDT_MODE_IRQ_EN		(1 << 3)
 #define WDT_MODE_AUTO_START	(1 << 4)
 #define WDT_MODE_DUAL_EN	(1 << 6)
+#define WDT_MODE_CNT_SEL	(1 << 8)
 #define WDT_MODE_KEY		0x22000000
 
 #define WDT_SWRST		0x14
@@ -70,6 +71,7 @@ struct mtk_wdt_dev {
 	spinlock_t lock; /* protects WDT_SWSYSRST reg */
 	struct reset_controller_dev rcdev;
 	bool disable_wdt_extrst;
+	bool reset_by_toprgu;
 };
 
 struct mtk_wdt_data {
@@ -279,6 +281,8 @@ static int mtk_wdt_start(struct watchdog_device *wdt_dev)
 		reg &= ~(WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
 	if (mtk_wdt->disable_wdt_extrst)
 		reg &= ~WDT_MODE_EXRST_EN;
+	if (mtk_wdt->reset_by_toprgu)
+		reg |= WDT_MODE_CNT_SEL;
 	reg |= (WDT_MODE_EN | WDT_MODE_KEY);
 	iowrite32(reg, wdt_base + WDT_MODE);
 
@@ -408,6 +412,9 @@ static int mtk_wdt_probe(struct platform_device *pdev)
 	mtk_wdt->disable_wdt_extrst =
 		of_property_read_bool(dev->of_node, "mediatek,disable-extrst");
 
+	mtk_wdt->reset_by_toprgu =
+		of_property_read_bool(dev->of_node, "mediatek,reset-by-toprgu");
+
 	return 0;
 }
 

drivers/watchdog/of_xilinx_wdt.c

@@ -154,11 +154,6 @@ static u32 xwdt_selftest(struct xwdt_device *xdev)
 		return XWT_TIMER_FAILED;
 }
 
-static void xwdt_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int xwdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -193,7 +188,7 @@ static int xwdt_probe(struct platform_device *pdev)
 
 	watchdog_set_nowayout(xilinx_wdt_wdd, enable_once);
 
-	xdev->clk = devm_clk_get(dev, NULL);
+	xdev->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(xdev->clk)) {
 		if (PTR_ERR(xdev->clk) != -ENOENT)
 			return PTR_ERR(xdev->clk);
@@ -211,15 +206,6 @@ static int xwdt_probe(struct platform_device *pdev)
 				 "The watchdog clock freq cannot be obtained\n");
 	} else {
 		pfreq = clk_get_rate(xdev->clk);
-		rc = clk_prepare_enable(xdev->clk);
-		if (rc) {
-			dev_err(dev, "unable to enable clock\n");
-			return rc;
-		}
-		rc = devm_add_action_or_reset(dev, xwdt_clk_disable_unprepare,
-					      xdev->clk);
-		if (rc)
-			return rc;
 	}
 
 	/*

drivers/watchdog/pcwd_usb.c

@@ -325,7 +325,8 @@ static int usb_pcwd_set_heartbeat(struct usb_pcwd_private *usb_pcwd, int t)
 static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd,
 							int *temperature)
 {
-	unsigned char msb, lsb;
+	unsigned char msb = 0x00;
+	unsigned char lsb = 0x00;
 
 	usb_pcwd_send_command(usb_pcwd, CMD_READ_TEMP, &msb, &lsb);
 
@@ -341,7 +342,8 @@ static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd,
 static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd,
 								int *time_left)
 {
-	unsigned char msb, lsb;
+	unsigned char msb = 0x00;
+	unsigned char lsb = 0x00;
 
 	/* Read the time that's left before rebooting */
 	/* Note: if the board is not yet armed then we will read 0xFFFF */

drivers/watchdog/pic32-dmt.c

@@ -164,11 +164,6 @@ static struct watchdog_device pic32_dmt_wdd = {
 	.ops		= &pic32_dmt_fops,
 };
 
-static void pic32_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int pic32_dmt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -184,20 +179,12 @@ static int pic32_dmt_probe(struct platform_device *pdev)
 	if (IS_ERR(dmt->regs))
 		return PTR_ERR(dmt->regs);
 
-	dmt->clk = devm_clk_get(dev, NULL);
+	dmt->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(dmt->clk)) {
 		dev_err(dev, "clk not found\n");
 		return PTR_ERR(dmt->clk);
 	}
 
-	ret = clk_prepare_enable(dmt->clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(dev, pic32_clk_disable_unprepare,
-				       dmt->clk);
-	if (ret)
-		return ret;
-
 	wdd->timeout = pic32_dmt_get_timeout_secs(dmt);
 	if (!wdd->timeout) {
 		dev_err(dev, "failed to read watchdog register timeout\n");

drivers/watchdog/pic32-wdt.c

@@ -162,11 +162,6 @@ static const struct of_device_id pic32_wdt_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, pic32_wdt_dt_ids);
 
-static void pic32_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int pic32_wdt_drv_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -186,22 +181,12 @@ static int pic32_wdt_drv_probe(struct platform_device *pdev)
 	if (!wdt->rst_base)
 		return -ENOMEM;
 
-	wdt->clk = devm_clk_get(dev, NULL);
+	wdt->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(wdt->clk)) {
 		dev_err(dev, "clk not found\n");
 		return PTR_ERR(wdt->clk);
 	}
 
-	ret = clk_prepare_enable(wdt->clk);
-	if (ret) {
-		dev_err(dev, "clk enable failed\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, pic32_clk_disable_unprepare,
-				       wdt->clk);
-	if (ret)
-		return ret;
-
 	if (pic32_wdt_is_win_enabled(wdt)) {
 		dev_err(dev, "windowed-clear mode is not supported.\n");
 		return -ENODEV;

drivers/watchdog/pnx4008_wdt.c

@@ -179,11 +179,6 @@ static struct watchdog_device pnx4008_wdd = {
 	.max_timeout = MAX_HEARTBEAT,
 };
 
-static void pnx4008_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int pnx4008_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -195,18 +190,10 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt_base))
 		return PTR_ERR(wdt_base);
 
-	wdt_clk = devm_clk_get(dev, NULL);
+	wdt_clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(wdt_clk))
 		return PTR_ERR(wdt_clk);
 
-	ret = clk_prepare_enable(wdt_clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(dev, pnx4008_clk_disable_unprepare,
-				       wdt_clk);
-	if (ret)
-		return ret;
-
 	pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
 			WDIOF_CARDRESET : 0;
 	pnx4008_wdd.parent = dev;

drivers/watchdog/qcom-wdt.c

@@ -175,11 +175,6 @@ static const struct watchdog_info qcom_wdt_pt_info = {
 	.identity	= KBUILD_MODNAME,
 };
 
-static void qcom_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static const struct qcom_wdt_match_data match_data_apcs_tmr = {
 	.offset = reg_offset_data_apcs_tmr,
 	.pretimeout = false,
@@ -226,21 +221,12 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
-	clk = devm_clk_get(dev, NULL);
+	clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(dev, "failed to get input clock\n");
 		return PTR_ERR(clk);
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(dev, "failed to setup clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, clk);
-	if (ret)
-		return ret;
-
 	/*
 	 * We use the clock rate to calculate the max timeout, so ensure it's
 	 * not zero to avoid a divide-by-zero exception.

drivers/watchdog/realtek_otto_wdt.c

@@ -235,27 +235,14 @@ static const struct watchdog_info otto_wdt_info = {
 		WDIOF_PRETIMEOUT,
 };
 
-static void otto_wdt_clock_action(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int otto_wdt_probe_clk(struct otto_wdt_ctrl *ctrl)
 {
-	struct clk *clk = devm_clk_get(ctrl->dev, NULL);
-	int ret;
+	struct clk *clk;
 
+	clk = devm_clk_get_enabled(ctrl->dev, NULL);
 	if (IS_ERR(clk))
 		return dev_err_probe(ctrl->dev, PTR_ERR(clk), "Failed to get clock\n");
 
-	ret = clk_prepare_enable(clk);
-	if (ret)
-		return dev_err_probe(ctrl->dev, ret, "Failed to enable clock\n");
-
-	ret = devm_add_action_or_reset(ctrl->dev, otto_wdt_clock_action, clk);
-	if (ret)
-		return ret;
-
 	ctrl->clk_rate_khz = clk_get_rate(clk) / 1000;
 	if (ctrl->clk_rate_khz == 0)
 		return dev_err_probe(ctrl->dev, -ENXIO, "Failed to get clock rate\n");

drivers/watchdog/rtd119x_wdt.c

@@ -94,16 +94,10 @@ static const struct of_device_id rtd119x_wdt_dt_ids[] = {
 	 { }
 };
 
-static void rtd119x_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int rtd119x_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rtd119x_watchdog_device *data;
-	int ret;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -113,18 +107,10 @@ static int rtd119x_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(data->base))
 		return PTR_ERR(data->base);
 
-	data->clk = devm_clk_get(dev, NULL);
+	data->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(data->clk))
 		return PTR_ERR(data->clk);
 
-	ret = clk_prepare_enable(data->clk);
-	if (ret)
-		return ret;
-	ret = devm_add_action_or_reset(dev, rtd119x_clk_disable_unprepare,
-				       data->clk);
-	if (ret)
-		return ret;
-
 	data->wdt_dev.info = &rtd119x_wdt_info;
 	data->wdt_dev.ops = &rtd119x_wdt_ops;
 	data->wdt_dev.timeout = 120;

drivers/watchdog/rzg2l_wdt.c

@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -35,6 +36,8 @@
 
 #define F2CYCLE_NSEC(f)			(1000000000 / (f))
 
+#define RZV2M_A_NSEC			730
+
 static bool nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
@@ -51,11 +54,35 @@ struct rzg2l_wdt_priv {
 	struct reset_control *rstc;
 	unsigned long osc_clk_rate;
 	unsigned long delay;
+	unsigned long minimum_assertion_period;
 	struct clk *pclk;
 	struct clk *osc_clk;
 	enum rz_wdt_type devtype;
 };
 
+static int rzg2l_wdt_reset(struct rzg2l_wdt_priv *priv)
+{
+	int err, status;
+
+	if (priv->devtype == WDT_RZV2M) {
+		/* WDT needs TYPE-B reset control */
+		err = reset_control_assert(priv->rstc);
+		if (err)
+			return err;
+		ndelay(priv->minimum_assertion_period);
+		err = reset_control_deassert(priv->rstc);
+		if (err)
+			return err;
+		err = read_poll_timeout(reset_control_status, status,
+					status != 1, 0, 1000, false,
+					priv->rstc);
+	} else {
+		err = reset_control_reset(priv->rstc);
+	}
+
+	return err;
+}
+
 static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv)
 {
 	/* delay timer when change the setting register */
@@ -115,25 +142,23 @@ static int rzg2l_wdt_stop(struct watchdog_device *wdev)
 {
 	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
 
+	rzg2l_wdt_reset(priv);
 	pm_runtime_put(wdev->parent);
-	reset_control_reset(priv->rstc);
 
 	return 0;
 }
 
 static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned int timeout)
 {
-	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
-
 	wdev->timeout = timeout;
 
 	/*
 	 * If the watchdog is active, reset the module for updating the WDTSET
-	 * register so that it is updated with new timeout values.
+	 * register by calling rzg2l_wdt_stop() (which internally calls reset_control_reset()
+	 * to reset the module) so that it is updated with new timeout values.
 	 */
 	if (watchdog_active(wdev)) {
-		pm_runtime_put(wdev->parent);
-		reset_control_reset(priv->rstc);
+		rzg2l_wdt_stop(wdev);
 		rzg2l_wdt_start(wdev);
 	}
 
@@ -156,6 +181,7 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
 		rzg2l_wdt_write(priv, PEEN_FORCE, PEEN);
 	} else {
 		/* RZ/V2M doesn't have parity error registers */
+		rzg2l_wdt_reset(priv);
 
 		wdev->timeout = 0;
 
@@ -253,6 +279,13 @@ static int rzg2l_wdt_probe(struct platform_device *pdev)
 
 	priv->devtype = (uintptr_t)of_device_get_match_data(dev);
 
+	if (priv->devtype == WDT_RZV2M) {
+		priv->minimum_assertion_period = RZV2M_A_NSEC +
+			3 * F2CYCLE_NSEC(pclk_rate) + 5 *
+			max(F2CYCLE_NSEC(priv->osc_clk_rate),
+			    F2CYCLE_NSEC(pclk_rate));
+	}
+
 	pm_runtime_enable(&pdev->dev);
 
 	priv->wdev.info = &rzg2l_wdt_ident;

drivers/watchdog/rzn1_wdt.c

@@ -98,11 +98,6 @@ static const struct watchdog_ops rzn1_wdt_ops = {
 	.ping = rzn1_wdt_ping,
 };
 
-static void rzn1_wdt_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int rzn1_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -132,23 +127,12 @@ static int rzn1_wdt_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	clk = devm_clk_get(dev, NULL);
+	clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(dev, "failed to get the clock\n");
 		return PTR_ERR(clk);
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(dev, "failed to prepare/enable the clock\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev, rzn1_wdt_clk_disable_unprepare,
-				       clk);
-	if (ret)
-		return ret;
-
 	clk_rate = clk_get_rate(clk);
 	if (!clk_rate) {
 		dev_err(dev, "failed to get the clock rate\n");

drivers/watchdog/sbsa_gwdt.c

@@ -150,6 +150,7 @@ static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd,
 	struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
 
 	wdd->timeout = timeout;
+	timeout = clamp_t(unsigned int, timeout, 1, wdd->max_hw_heartbeat_ms / 1000);
 
 	if (action)
 		sbsa_gwdt_reg_write(gwdt->clk * timeout, gwdt);

drivers/watchdog/visconti_wdt.c

@@ -112,11 +112,6 @@ static const struct watchdog_ops visconti_wdt_ops = {
 	.set_timeout	= visconti_wdt_set_timeout,
 };
 
-static void visconti_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int visconti_wdt_probe(struct platform_device *pdev)
 {
 	struct watchdog_device *wdev;
@@ -134,20 +129,10 @@ static int visconti_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
-	clk = devm_clk_get(dev, NULL);
+	clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(clk))
 		return dev_err_probe(dev, PTR_ERR(clk), "Could not get clock\n");
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(dev, "Could not enable clock\n");
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev, visconti_clk_disable_unprepare, clk);
-	if (ret)
-		return ret;
-
 	clk_freq = clk_get_rate(clk);
 	if (!clk_freq)
 		return -EINVAL;

drivers/watchdog/watchdog_dev.c

@@ -35,6 +35,7 @@
 #include <linux/init.h>		/* For __init/__exit/... */
 #include <linux/hrtimer.h>	/* For hrtimers */
 #include <linux/kernel.h>	/* For printk/panic/... */
+#include <linux/kstrtox.h>	/* For kstrto* */
 #include <linux/kthread.h>	/* For kthread_work */
 #include <linux/miscdevice.h>	/* For handling misc devices */
 #include <linux/module.h>	/* For module stuff/... */
@@ -546,6 +547,24 @@ static ssize_t pretimeout_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(pretimeout);
 
+static ssize_t options_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "0x%x\n", wdd->info->options);
+}
+static DEVICE_ATTR_RO(options);
+
+static ssize_t fw_version_show(struct device *dev, struct device_attribute *attr,
+			       char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", wdd->info->firmware_version);
+}
+static DEVICE_ATTR_RO(fw_version);
+
 static ssize_t identity_show(struct device *dev, struct device_attribute *attr,
 				char *buf)
 {
@@ -617,6 +636,8 @@ static umode_t wdt_is_visible(struct kobject *kobj, struct attribute *attr,
 }
 static struct attribute *wdt_attrs[] = {
 	&dev_attr_state.attr,
+	&dev_attr_options.attr,
+	&dev_attr_fw_version.attr,
 	&dev_attr_identity.attr,
 	&dev_attr_timeout.attr,
 	&dev_attr_min_timeout.attr,
@@ -1061,8 +1082,8 @@ static int watchdog_cdev_register(struct watchdog_device *wdd)
 		if (wdd->id == 0) {
 			misc_deregister(&watchdog_miscdev);
 			old_wd_data = NULL;
-			put_device(&wd_data->dev);
 		}
+		put_device(&wd_data->dev);
 		return err;
 	}
 

drivers/watchdog/wdat_wdt.c

@@ -301,13 +301,12 @@ static const struct watchdog_info wdat_wdt_info = {
 	.identity = "wdat_wdt",
 };
 
-static const struct watchdog_ops wdat_wdt_ops = {
+static struct watchdog_ops wdat_wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = wdat_wdt_start,
 	.stop = wdat_wdt_stop,
 	.ping = wdat_wdt_ping,
 	.set_timeout = wdat_wdt_set_timeout,
-	.get_timeleft = wdat_wdt_get_timeleft,
 };
 
 static int wdat_wdt_probe(struct platform_device *pdev)
@@ -436,6 +435,9 @@ static int wdat_wdt_probe(struct platform_device *pdev)
 		list_add_tail(&instr->node, instructions);
 	}
 
+	if (wdat->instructions[ACPI_WDAT_GET_CURRENT_COUNTDOWN])
+		wdat_wdt_ops.get_timeleft = wdat_wdt_get_timeleft;
+
 	wdat_wdt_boot_status(wdat);
 	wdat_wdt_set_running(wdat);
 

drivers/watchdog/ziirave_wdt.c

@@ -593,8 +593,7 @@ static int ziirave_wdt_init_duration(struct i2c_client *client)
 					 reset_duration);
 }
 
-static int ziirave_wdt_probe(struct i2c_client *client,
-			     const struct i2c_device_id *id)
+static int ziirave_wdt_probe(struct i2c_client *client)
 {
 	int ret;
 	struct ziirave_wdt_data *w_priv;
@@ -732,7 +731,7 @@ static struct i2c_driver ziirave_wdt_driver = {
 		.name = "ziirave_wdt",
 		.of_match_table = zrv_wdt_of_match,
 	},
-	.probe = ziirave_wdt_probe,
+	.probe_new = ziirave_wdt_probe,
 	.remove = ziirave_wdt_remove,
 	.id_table = ziirave_wdt_id,
 };