net: phy: Add phydev_warn()

Not all new style LINK_MODE bits can be converted into old style
SUPPORTED bits. We need to warn when such a conversion is attempted.
Add a helper for this.

Convert all pr_warn() calls to phydev_warn() where possible.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/at803x.c

@@ -357,7 +357,7 @@ static int at803x_aneg_done(struct phy_device *phydev)
 
 	/* check if the SGMII link is OK. */
 	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
-		pr_warn("803x_aneg_done: SGMII link is not ok\n");
+		phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
 		aneg_done = 0;
 	}
 	/* switch back to copper page */

drivers/net/phy/dp83640.c

@@ -553,16 +553,17 @@ static void enable_status_frames(struct phy_device *phydev, bool on)
 	mutex_unlock(&clock->extreg_lock);
 
 	if (!phydev->attached_dev) {
-		pr_warn("expected to find an attached netdevice\n");
+		phydev_warn(phydev,
+			    "expected to find an attached netdevice\n");
 		return;
 	}
 
 	if (on) {
 		if (dev_mc_add(phydev->attached_dev, status_frame_dst))
-			pr_warn("failed to add mc address\n");
+			phydev_warn(phydev, "failed to add mc address\n");
 	} else {
 		if (dev_mc_del(phydev->attached_dev, status_frame_dst))
-			pr_warn("failed to delete mc address\n");
+			phydev_warn(phydev, "failed to delete mc address\n");
 	}
 }
 

drivers/net/phy/marvell.c

@@ -638,7 +638,7 @@ static void marvell_config_led(struct phy_device *phydev)
 	err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
 			      def_config);
 	if (err < 0)
-		pr_warn("Fail to config marvell phy LED.\n");
+		phydev_warn(phydev, "Fail to config marvell phy LED.\n");
 }
 
 static int marvell_config_init(struct phy_device *phydev)

drivers/net/phy/marvell10g.c

@@ -337,7 +337,7 @@ static int mv3310_config_init(struct phy_device *phydev)
 	}
 
 	if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported))
-		dev_warn(&phydev->mdio.dev,
+		phydev_warn(phydev,
 			    "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n",
 			    __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
 

drivers/net/phy/microchip.c

@@ -88,7 +88,7 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 	/* Save current page */
 	save_page = phy_save_page(phydev);
 	if (save_page < 0) {
-		pr_warn("Failed to get current page\n");
+		phydev_warn(phydev, "Failed to get current page\n");
 		goto err;
 	}
 
@@ -98,14 +98,14 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
 			  (data & 0xFFFF));
 	if (ret < 0) {
-		pr_warn("Failed to write TR low data\n");
+		phydev_warn(phydev, "Failed to write TR low data\n");
 		goto err;
 	}
 
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
 			  (data & 0x00FF0000) >> 16);
 	if (ret < 0) {
-		pr_warn("Failed to write TR high data\n");
+		phydev_warn(phydev, "Failed to write TR high data\n");
 		goto err;
 	}
 
@@ -115,14 +115,15 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
 	if (ret < 0) {
-		pr_warn("Failed to write data in reg\n");
+		phydev_warn(phydev, "Failed to write data in reg\n");
 		goto err;
 	}
 
 	usleep_range(1000, 2000);/* Wait for Data to be written */
 	val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
 	if (!(val & 0x8000))
-		pr_warn("TR Register[0x%X] configuration failed\n", regaddr);
+		phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
+			    regaddr);
 err:
 	return phy_restore_page(phydev, save_page, ret);
 }
@@ -137,7 +138,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0F82]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x06.
 	 * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
@@ -145,7 +146,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x168C]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
 
 	/* Get access to Channel b'10, Node b'1111, Register 0x11.
 	 * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
@@ -153,7 +154,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x17A2]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x10.
 	 * Write 24-bit value 0xEEFFDD to register. Setting
@@ -162,7 +163,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A0]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x13.
 	 * Write 24-bit value 0x071448 to register. Setting
@@ -170,7 +171,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A6]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x12.
 	 * Write 24-bit value 0x13132F to register. Setting
@@ -178,7 +179,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A4]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x14.
 	 * Write 24-bit value 0x0 to register. Setting eee_3level_delay,
@@ -186,7 +187,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A8]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
 
 	/* Get access to Channel b'01, Node b'1111, Register 0x34.
 	 * Write 24-bit value 0x91B06C to register. Setting
@@ -195,7 +196,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0FE8]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
 
 	/* Get access to Channel b'01, Node b'1111, Register 0x3E.
 	 * Write 24-bit value 0xC0A028 to register. Setting
@@ -204,7 +205,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0FFC]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
 
 	/* Get access to Channel b'01, Node b'1111, Register 0x35.
 	 * Write 24-bit value 0x041600 to register. Setting
@@ -213,14 +214,14 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0FEA]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x03.
 	 * Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x1686]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
 }
 
 static int lan88xx_probe(struct phy_device *phydev)

include/linux/phy.h

@@ -968,6 +968,9 @@ static inline void phy_device_reset(struct phy_device *phydev, int value)
 #define phydev_err(_phydev, format, args...)	\
 	dev_err(&_phydev->mdio.dev, format, ##args)
 
+#define phydev_warn(_phydev, format, args...)	\
+	dev_warn(&_phydev->mdio.dev, format, ##args)
+
 #define phydev_dbg(_phydev, format, args...)	\
 	dev_dbg(&_phydev->mdio.dev, format, ##args)