Skip to content

L
linux
Commit adca3e61 authored by Andreas Faerber's avatar Andreas Faerber Committed by Kukjin Kim
Browse files
Options

ARM: dts: Clean up exynos5250-smdk5250 

Use the new style for referencing inherited nodes and use symbolic
names. Goal is the alignment of all exynos5250 based device trees
for comparison.
Signed-off-by: default avatarAndreas Faerber <afaerber@suse.de>
Reviewed-by: default avatarTomasz Figa <t.figa@samsung.com>
[kgene.kim@samsung.com: rebased and squashed]
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 5140e29d
Hide whitespace changes
Inline Side-by-side
Showing with 312 additions and 307 deletions
arch/arm/boot/dts/exynos5250-smdk5250.dts
View file @ adca3e61
...@@ -7,9 +7,11 @@ ...@@ -7,9 +7,11 @@
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
/dts-v1/; /dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi" #include "exynos5250.dtsi"
/ { / {
...@@ -27,165 +29,6 @@ chosen { ...@@ -27,165 +29,6 @@ chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
}; };
rtc@101E0000 {
status = "okay";
};
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
status = "okay";
eeprom@50 {
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
max77686@09 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
interrupts = <2 0>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "P1.0V_LDO_OUT1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "P1.2V_LDO_OUT2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "P1.8V_LDO_OUT3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "P2.8V_LDO_OUT4";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo5_reg: LDO5 {
regulator-name = "P1.8V_LDO_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo6_reg: LDO6 {
regulator-name = "P1.1V_LDO_OUT6";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo11_reg: LDO11 {
regulator-name = "P1.8V_LDO_OUT11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo13_reg: LDO13 {
regulator-name = "P1.8V_LDO_OUT13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
vdd: fixed-regulator@0 { vdd: fixed-regulator@0 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "vdd-supply"; regulator-name = "vdd-supply";
...@@ -210,199 +53,360 @@ spkvdd: fixed-regulator@2 { ...@@ -210,199 +53,360 @@ spkvdd: fixed-regulator@2 {
regulator-always-on; regulator-always-on;
}; };
i2c@12C70000 { sound {
samsung,i2c-sda-delay = <100>; compatible = "samsung,smdk-wm8994";
samsung,i2c-max-bus-freq = <20000>;
status = "okay";
eeprom@51 { samsung,i2s-controller = <&i2s0>;
compatible = "samsung,s524ad0xd1"; samsung,audio-codec = <&wm8994>;
reg = <0x51>; };
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
clock-frequency = <24000000>;
}; };
wm8994: wm8994@1a { codec_mclk: codec-mclk {
compatible = "wlf,wm8994"; compatible = "fixed-clock";
reg = <0x1a>; #clock-cells = <0>;
clock-frequency = <16934000>;
};
};
};
gpio-controller; &dp {
#gpio-cells = <2>; samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
status = "okay";
};
clocks = <&codec_mclk>; &ehci {
clock-names = "MCLK1"; samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
};
AVDD2-supply = <&vdd>; &fimd {
CPVDD-supply = <&vdd>; status = "okay";
DBVDD-supply = <&dbvdd>;
SPKVDD1-supply = <&spkvdd>; display-timings {
SPKVDD2-supply = <&spkvdd>; native-mode = <&timing0>;
timing0: timing@0 {
/* 1280x800 */
clock-frequency = <50000>;
hactive = <1280>;
vactive = <800>;
hfront-porch = <4>;
hback-porch = <4>;
hsync-len = <4>;
vback-porch = <4>;
vfront-porch = <4>;
vsync-len = <4>;
}; };
}; };
};
i2c@121D0000 { &hdmi {
samsung,i2c-sda-delay = <100>; hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
samsung,i2c-max-bus-freq = <40000>; };
samsung,i2c-slave-addr = <0x38>;
status = "okay";
sata_phy_i2c:sata-phy@38 { &i2c_0 {
compatible = "samsung,exynos-sataphy-i2c"; status = "okay";
reg = <0x38>; samsung,i2c-sda-delay = <100>;
}; samsung,i2c-max-bus-freq = <20000>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
}; };
i2c@12C80000 { max77686@09 {
samsung,i2c-sda-delay = <100>; compatible = "maxim,max77686";
samsung,i2c-max-bus-freq = <66000>; reg = <0x09>;
status = "okay"; interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "P1.0V_LDO_OUT1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
hdmiddc@50 { ldo2_reg: LDO2 {
compatible = "samsung,exynos4210-hdmiddc"; regulator-name = "P1.2V_LDO_OUT2";
reg = <0x50>; regulator-min-microvolt = <1200000>;
}; regulator-max-microvolt = <1200000>;
}; regulator-always-on;
};
i2c@12CE0000 { ldo3_reg: LDO3 {
samsung,i2c-sda-delay = <100>; regulator-name = "P1.8V_LDO_OUT3";
samsung,i2c-max-bus-freq = <66000>; regulator-min-microvolt = <1800000>;
status = "okay"; regulator-max-microvolt = <1800000>;
regulator-always-on;
};
hdmiphy@38 { ldo4_reg: LDO4 {
compatible = "samsung,exynos4212-hdmiphy"; regulator-name = "P2.8V_LDO_OUT4";
reg = <0x38>; regulator-min-microvolt = <2800000>;
}; regulator-max-microvolt = <2800000>;
}; };
sata@122F0000 { ldo5_reg: LDO5 {
status = "okay"; regulator-name = "P1.8V_LDO_OUT5";
}; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
sata-phy@12170000 { ldo6_reg: LDO6 {
status = "okay"; regulator-name = "P1.1V_LDO_OUT6";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; regulator-min-microvolt = <1100000>;
}; regulator-max-microvolt = <1100000>;
regulator-always-on;
};
mmc@12200000 { ldo7_reg: LDO7 {
status = "okay"; regulator-name = "P1.1V_LDO_OUT7";
num-slots = <1>; regulator-min-microvolt = <1100000>;
broken-cd; regulator-max-microvolt = <1100000>;
card-detect-delay = <200>; regulator-always-on;
samsung,dw-mshc-ciu-div = <3>; };
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
bus-width = <8>;
cap-mmc-highspeed;
};
mmc@12220000 { ldo8_reg: LDO8 {
status = "okay"; regulator-name = "P1.0V_LDO_OUT8";
num-slots = <1>; regulator-min-microvolt = <1000000>;
card-detect-delay = <200>; regulator-max-microvolt = <1000000>;
samsung,dw-mshc-ciu-div = <3>; };
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>; ldo10_reg: LDO10 {
pinctrl-names = "default"; regulator-name = "P1.8V_LDO_OUT10";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; regulator-min-microvolt = <1800000>;
bus-width = <4>; regulator-max-microvolt = <1800000>;
disable-wp; };
cap-sd-highspeed;
};
spi_1: spi@12d30000 { ldo11_reg: LDO11 {
cs-gpios = <&gpa2 5 0>; regulator-name = "P1.8V_LDO_OUT11";
status = "okay"; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
w25q80bw@0 { ldo12_reg: LDO12 {
#address-cells = <1>; regulator-name = "P3.0V_LDO_OUT12";
#size-cells = <1>; regulator-min-microvolt = <3000000>;
compatible = "w25x80"; regulator-max-microvolt = <3000000>;
reg = <0>; };
spi-max-frequency = <1000000>;
controller-data { ldo13_reg: LDO13 {
samsung,spi-feedback-delay = <0>; regulator-name = "P1.8V_LDO_OUT13";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
}; };
partition@0 { ldo14_reg: LDO14 {
label = "U-Boot"; regulator-name = "P1.8V_LDO_OUT14";
reg = <0x0 0x40000>; regulator-min-microvolt = <1800000>;
read-only; regulator-max-microvolt = <1800000>;
}; };
partition@40000 { ldo15_reg: LDO15 {
label = "Kernel"; regulator-name = "P1.0V_LDO_OUT15";
reg = <0x40000 0xc0000>; regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
}; };
}; };
}; };
};
hdmi { &i2c_1 {
hpd-gpio = <&gpx3 7 0>; status = "okay";
}; samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
codec@11000000 { eeprom@51 {
samsung,mfc-r = <0x43000000 0x800000>; compatible = "samsung,s524ad0xd1";
samsung,mfc-l = <0x51000000 0x800000>; reg = <0x51>;
}; };
i2s0: i2s@03830000 { wm8994: wm8994@1a {
status = "okay"; compatible = "wlf,wm8994";
reg = <0x1a>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&codec_mclk>;
clock-names = "MCLK1";
AVDD2-supply = <&vdd>;
CPVDD-supply = <&vdd>;
DBVDD-supply = <&dbvdd>;
SPKVDD1-supply = <&spkvdd>;
SPKVDD2-supply = <&spkvdd>;
}; };
};
sound { &i2c_2 {
compatible = "samsung,smdk-wm8994"; status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
samsung,i2s-controller = <&i2s0>; hdmiddc@50 {
samsung,audio-codec = <&wm8994>; compatible = "samsung,exynos4210-hdmiddc";
reg = <0x50>;
}; };
};
&i2c_8 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
usb@12110000 { hdmiphy@38 {
samsung,vbus-gpio = <&gpx2 6 0>; compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
}; };
};
&i2c_9 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
samsung,i2c-slave-addr = <0x38>;
dp-controller@145B0000 { sata_phy_i2c: sata-phy@38 {
samsung,color-space = <0>; compatible = "samsung,exynos-sataphy-i2c";
samsung,dynamic-range = <0>; reg = <0x38>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
status = "okay";
}; };
};
fimd@14400000 { &i2s0 {
status = "okay"; status = "okay";
display-timings { };
native-mode = <&timing0>;
timing0: timing@0 { &mfc {
/* 1280x800 */ samsung,mfc-r = <0x43000000 0x800000>;
clock-frequency = <50000>; samsung,mfc-l = <0x51000000 0x800000>;
hactive = <1280>; };
vactive = <800>;
hfront-porch = <4>; &mmc_0 {
hback-porch = <4>; status = "okay";
hsync-len = <4>; num-slots = <1>;
vback-porch = <4>; broken-cd;
vfront-porch = <4>; card-detect-delay = <200>;
vsync-len = <4>; samsung,dw-mshc-ciu-div = <3>;
}; samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
bus-width = <8>;
cap-mmc-highspeed;
};
&mmc_2 {
status = "okay";
num-slots = <1>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
};
&rtc {
status = "okay";
};
&sata {
status = "okay";
};
&sata_phy {
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
&spi_1 {
status = "okay";
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
reg = <0>;
spi-max-frequency = <1000000>;
controller-data {
samsung,spi-feedback-delay = <0>;
}; };
};
fixed-rate-clocks { partition@0 {
xxti { label = "U-Boot";
compatible = "samsung,clock-xxti"; reg = <0x0 0x40000>;
clock-frequency = <24000000>; read-only;
}; };
codec_mclk: codec-mclk { partition@40000 {
compatible = "fixed-clock"; label = "Kernel";
#clock-cells = <0>; reg = <0x40000 0xc0000>;
clock-frequency = <16934000>;
}; };
}; };
}; };
arch/arm/boot/dts/exynos5250-snow.dts
View file @ adca3e61
...@@ -226,6 +226,7 @@ panel: panel { ...@@ -226,6 +226,7 @@ panel: panel {
power-supply = <&fet6>; power-supply = <&fet6>;
backlight = <&backlight>; backlight = <&backlight>;
}; };
};
&dp { &dp {
status = "okay"; status = "okay";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7