Commit adceac2c authored by Geert Uytterhoeven's avatar Geert Uytterhoeven

drm: renesas: shmobile: Move interface handling to connector setup

Move legacy interface handling to the connector setup code.
Set up bus_flags and bus_formats in display_info according to the
bus format and panel information from platform data, to make it more
similar with DT-based connector/bridge/panel setup.
This will allow us to use the same LCD interface setup code for both
legacy and DT-based systems.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/912f615eb87c847804a268200ab57c63453c65d4.1694767209.git.geert+renesas@glider.be
parent fa32c6bc
...@@ -8,6 +8,7 @@ ...@@ -8,6 +8,7 @@
*/ */
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/media-bus-format.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <drm/drm_crtc.h> #include <drm/drm_crtc.h>
...@@ -39,20 +40,55 @@ ...@@ -39,20 +40,55 @@
* CRTC * CRTC
*/ */
static const struct {
u32 fmt;
u32 ldmt1r;
} shmob_drm_bus_fmts[] = {
{ MEDIA_BUS_FMT_RGB888_3X8, LDMT1R_MIFTYP_RGB8 },
{ MEDIA_BUS_FMT_RGB666_2X9_BE, LDMT1R_MIFTYP_RGB9 },
{ MEDIA_BUS_FMT_RGB888_2X12_BE, LDMT1R_MIFTYP_RGB12A },
{ MEDIA_BUS_FMT_RGB444_1X12, LDMT1R_MIFTYP_RGB12B },
{ MEDIA_BUS_FMT_RGB565_1X16, LDMT1R_MIFTYP_RGB16 },
{ MEDIA_BUS_FMT_RGB666_1X18, LDMT1R_MIFTYP_RGB18 },
{ MEDIA_BUS_FMT_RGB888_1X24, LDMT1R_MIFTYP_RGB24 },
{ MEDIA_BUS_FMT_UYVY8_1X16, LDMT1R_MIFTYP_YCBCR },
};
static void shmob_drm_crtc_setup_geometry(struct shmob_drm_crtc *scrtc) static void shmob_drm_crtc_setup_geometry(struct shmob_drm_crtc *scrtc)
{ {
struct drm_crtc *crtc = &scrtc->crtc; struct drm_crtc *crtc = &scrtc->crtc;
struct shmob_drm_device *sdev = to_shmob_device(crtc->dev); struct shmob_drm_device *sdev = to_shmob_device(crtc->dev);
enum display_flags dpy_flags = sdev->connector.mode->flags; const struct drm_display_info *info = &sdev->connector->display_info;
const struct drm_display_mode *mode = &crtc->mode; const struct drm_display_mode *mode = &crtc->mode;
unsigned int i;
u32 value; u32 value;
value = sdev->ldmt1r if (!info->num_bus_formats || !info->bus_formats) {
| ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : LDMT1R_VPOL) dev_warn(sdev->dev, "No bus format reported, using RGB888\n");
| ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : LDMT1R_HPOL) value = LDMT1R_MIFTYP_RGB24;
| ((dpy_flags & DISPLAY_FLAGS_PIXDATA_POSEDGE) ? LDMT1R_DWPOL : 0) } else {
| ((dpy_flags & DISPLAY_FLAGS_DE_LOW) ? LDMT1R_DIPOL : 0); for (i = 0; i < ARRAY_SIZE(shmob_drm_bus_fmts); i++) {
if (shmob_drm_bus_fmts[i].fmt == info->bus_formats[0])
break;
}
if (i < ARRAY_SIZE(shmob_drm_bus_fmts)) {
value = shmob_drm_bus_fmts[i].ldmt1r;
} else {
dev_warn(sdev->dev,
"unsupported bus format 0x%x, using RGB888\n",
info->bus_formats[0]);
value = LDMT1R_MIFTYP_RGB24;
}
}
if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
value |= LDMT1R_DWPOL;
if (info->bus_flags & DRM_BUS_FLAG_DE_LOW)
value |= LDMT1R_DIPOL;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
value |= LDMT1R_VPOL;
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
value |= LDMT1R_HPOL;
lcdc_write(sdev, LDMT1R, value); lcdc_write(sdev, LDMT1R, value);
value = ((mode->hdisplay / 8) << 16) /* HDCN */ value = ((mode->hdisplay / 8) << 16) /* HDCN */
...@@ -479,7 +515,7 @@ static bool shmob_drm_encoder_mode_fixup(struct drm_encoder *encoder, ...@@ -479,7 +515,7 @@ static bool shmob_drm_encoder_mode_fixup(struct drm_encoder *encoder,
{ {
struct drm_device *dev = encoder->dev; struct drm_device *dev = encoder->dev;
struct shmob_drm_device *sdev = to_shmob_device(dev); struct shmob_drm_device *sdev = to_shmob_device(dev);
struct drm_connector *connector = &sdev->connector.connector; struct drm_connector *connector = sdev->connector;
const struct drm_display_mode *panel_mode; const struct drm_display_mode *panel_mode;
if (list_empty(&connector->modes)) { if (list_empty(&connector->modes)) {
...@@ -581,6 +617,8 @@ static void shmob_drm_connector_destroy(struct drm_connector *connector) ...@@ -581,6 +617,8 @@ static void shmob_drm_connector_destroy(struct drm_connector *connector)
{ {
drm_connector_unregister(connector); drm_connector_unregister(connector);
drm_connector_cleanup(connector); drm_connector_cleanup(connector);
kfree(connector);
} }
static const struct drm_connector_funcs connector_funcs = { static const struct drm_connector_funcs connector_funcs = {
...@@ -589,26 +627,74 @@ static const struct drm_connector_funcs connector_funcs = { ...@@ -589,26 +627,74 @@ static const struct drm_connector_funcs connector_funcs = {
.destroy = shmob_drm_connector_destroy, .destroy = shmob_drm_connector_destroy,
}; };
int shmob_drm_connector_create(struct shmob_drm_device *sdev, static struct drm_connector *
shmob_drm_connector_init(struct shmob_drm_device *sdev,
struct drm_encoder *encoder) struct drm_encoder *encoder)
{ {
struct shmob_drm_connector *scon = &sdev->connector; u32 bus_fmt = sdev->pdata->iface.bus_fmt;
struct drm_connector *connector = &scon->connector; struct shmob_drm_connector *scon;
struct drm_connector *connector;
struct drm_display_info *info;
unsigned int i;
int ret; int ret;
for (i = 0; i < ARRAY_SIZE(shmob_drm_bus_fmts); i++) {
if (shmob_drm_bus_fmts[i].fmt == bus_fmt)
break;
}
if (i == ARRAY_SIZE(shmob_drm_bus_fmts)) {
dev_err(sdev->dev, "unsupported bus format 0x%x\n", bus_fmt);
return ERR_PTR(-EINVAL);
}
scon = kzalloc(sizeof(*scon), GFP_KERNEL);
if (!scon)
return ERR_PTR(-ENOMEM);
connector = &scon->connector;
scon->encoder = encoder; scon->encoder = encoder;
scon->mode = &sdev->pdata->panel.mode; scon->mode = &sdev->pdata->panel.mode;
connector->display_info.width_mm = sdev->pdata->panel.width_mm; info = &connector->display_info;
connector->display_info.height_mm = sdev->pdata->panel.height_mm; info->width_mm = sdev->pdata->panel.width_mm;
info->height_mm = sdev->pdata->panel.height_mm;
if (scon->mode->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
if (scon->mode->flags & DISPLAY_FLAGS_DE_LOW)
info->bus_flags |= DRM_BUS_FLAG_DE_LOW;
ret = drm_display_info_set_bus_formats(info, &bus_fmt, 1);
if (ret < 0) {
kfree(scon);
return ERR_PTR(ret);
}
ret = drm_connector_init(&sdev->ddev, connector, &connector_funcs, ret = drm_connector_init(&sdev->ddev, connector, &connector_funcs,
DRM_MODE_CONNECTOR_DPI); DRM_MODE_CONNECTOR_DPI);
if (ret < 0) if (ret < 0) {
return ret; kfree(scon);
return ERR_PTR(ret);
}
drm_connector_helper_add(connector, &connector_helper_funcs); drm_connector_helper_add(connector, &connector_helper_funcs);
return connector;
}
int shmob_drm_connector_create(struct shmob_drm_device *sdev,
struct drm_encoder *encoder)
{
struct drm_connector *connector;
int ret;
connector = shmob_drm_connector_init(sdev, encoder);
if (IS_ERR(connector)) {
dev_err(sdev->dev, "failed to created connector: %pe\n",
connector);
return PTR_ERR(connector);
}
ret = drm_connector_attach_encoder(connector, encoder); ret = drm_connector_attach_encoder(connector, encoder);
if (ret < 0) if (ret < 0)
goto error; goto error;
...@@ -617,6 +703,8 @@ int shmob_drm_connector_create(struct shmob_drm_device *sdev, ...@@ -617,6 +703,8 @@ int shmob_drm_connector_create(struct shmob_drm_device *sdev,
drm_object_property_set_value(&connector->base, drm_object_property_set_value(&connector->base,
sdev->ddev.mode_config.dpms_property, DRM_MODE_DPMS_OFF); sdev->ddev.mode_config.dpms_property, DRM_MODE_DPMS_OFF);
sdev->connector = connector;
return 0; return 0;
error: error:
......
...@@ -9,7 +9,6 @@ ...@@ -9,7 +9,6 @@
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/media-bus-format.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
...@@ -33,35 +32,6 @@ ...@@ -33,35 +32,6 @@
* Hardware initialization * Hardware initialization
*/ */
static int shmob_drm_init_interface(struct shmob_drm_device *sdev)
{
static const struct {
u32 fmt;
u32 ldmt1r;
} bus_fmts[] = {
{ MEDIA_BUS_FMT_RGB888_3X8, LDMT1R_MIFTYP_RGB8 },
{ MEDIA_BUS_FMT_RGB666_2X9_BE, LDMT1R_MIFTYP_RGB9 },
{ MEDIA_BUS_FMT_RGB888_2X12_BE, LDMT1R_MIFTYP_RGB12A },
{ MEDIA_BUS_FMT_RGB444_1X12, LDMT1R_MIFTYP_RGB12B },
{ MEDIA_BUS_FMT_RGB565_1X16, LDMT1R_MIFTYP_RGB16 },
{ MEDIA_BUS_FMT_RGB666_1X18, LDMT1R_MIFTYP_RGB18 },
{ MEDIA_BUS_FMT_RGB888_1X24, LDMT1R_MIFTYP_RGB24 },
{ MEDIA_BUS_FMT_UYVY8_1X16, LDMT1R_MIFTYP_YCBCR },
};
unsigned int i;
for (i = 0; i < ARRAY_SIZE(bus_fmts); i++) {
if (bus_fmts[i].fmt == sdev->pdata->iface.bus_fmt) {
sdev->ldmt1r = bus_fmts[i].ldmt1r;
return 0;
}
}
dev_err(sdev->dev, "unsupported bus format 0x%x\n",
sdev->pdata->iface.bus_fmt);
return -EINVAL;
}
static int shmob_drm_setup_clocks(struct shmob_drm_device *sdev, static int shmob_drm_setup_clocks(struct shmob_drm_device *sdev,
enum shmob_drm_clk_source clksrc) enum shmob_drm_clk_source clksrc)
{ {
...@@ -246,10 +216,6 @@ static int shmob_drm_probe(struct platform_device *pdev) ...@@ -246,10 +216,6 @@ static int shmob_drm_probe(struct platform_device *pdev)
if (ret) if (ret)
return ret; return ret;
ret = shmob_drm_init_interface(sdev);
if (ret < 0)
return ret;
ret = shmob_drm_modeset_init(sdev); ret = shmob_drm_modeset_init(sdev);
if (ret < 0) if (ret < 0)
return dev_err_probe(&pdev->dev, ret, return dev_err_probe(&pdev->dev, ret,
......
...@@ -27,7 +27,6 @@ struct shmob_drm_device { ...@@ -27,7 +27,6 @@ struct shmob_drm_device {
void __iomem *mmio; void __iomem *mmio;
struct clk *clock; struct clk *clock;
u32 lddckr; u32 lddckr;
u32 ldmt1r;
unsigned int irq; unsigned int irq;
spinlock_t irq_lock; /* Protects hardware LDINTR register */ spinlock_t irq_lock; /* Protects hardware LDINTR register */
...@@ -36,7 +35,7 @@ struct shmob_drm_device { ...@@ -36,7 +35,7 @@ struct shmob_drm_device {
struct shmob_drm_crtc crtc; struct shmob_drm_crtc crtc;
struct drm_encoder encoder; struct drm_encoder encoder;
struct shmob_drm_connector connector; struct drm_connector *connector;
}; };
static inline struct shmob_drm_device *to_shmob_device(struct drm_device *dev) static inline struct shmob_drm_device *to_shmob_device(struct drm_device *dev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment