Commit ae0122b6 authored by Larry Finger's avatar Larry Finger Committed by Kalle Valo

rtlwifi: rtl_pci: Fix formatting problems in pci.c

Checkpatch.pl reports a number of formatting problems in this source
file. None of the changes cause any functional changes in the driver.
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 6bc05d5d
......@@ -54,8 +54,7 @@ static const u8 ac_to_hwq[] = {
BK_QUEUE
};
static u8 _rtl_mac_to_hwqueue(struct ieee80211_hw *hw,
struct sk_buff *skb)
static u8 _rtl_mac_to_hwqueue(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
__le16 fc = rtl_get_fc(skb);
......@@ -104,20 +103,18 @@ static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
break;
case 3:
/*
* Always enable ASPM and Clock Req
/* Always enable ASPM and Clock Req
* from initialization to halt.
* */
*/
ppsc->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM);
ppsc->reg_rfps_level |= (RT_RF_PS_LEVEL_ALWAYS_ASPM |
RT_RF_OFF_LEVL_CLK_REQ);
break;
case 4:
/*
* Always enable ASPM without Clock Req
/* Always enable ASPM without Clock Req
* from initialization to halt.
* */
*/
ppsc->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM |
RT_RF_OFF_LEVL_CLK_REQ);
ppsc->reg_rfps_level |= RT_RF_PS_LEVEL_ALWAYS_ASPM;
......@@ -180,10 +177,11 @@ static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
}
/* toshiba aspm issue, toshiba will set aspm selfly
* so we should not set aspm in driver */
* so we should not set aspm in driver
*/
pci_read_config_byte(rtlpci->pdev, 0x80, &init_aspm);
if (rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8192SE &&
init_aspm == 0x43)
init_aspm == 0x43)
ppsc->support_aspm = false;
}
......@@ -263,8 +261,7 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw)
udelay(50);
}
/*
*Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for
/*Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for
*power saving We should follow the sequence to enable
*RTL8192SE first then enable Pci Bridge ASPM
*or the system will show bluescreen.
......@@ -334,7 +331,7 @@ static bool rtl_pci_get_amd_l1_patch(struct ieee80211_hw *hw)
bool status = false;
u8 offset_e0;
unsigned offset_e4;
unsigned int offset_e4;
pci_write_config_byte(rtlpci->pdev, 0xe0, 0xa0);
......@@ -369,12 +366,12 @@ static bool rtl_pci_check_buddy_priv(struct ieee80211_hw *hw,
"tpcipriv->ndis_adapter.funcnumber %x\n",
tpcipriv->ndis_adapter.funcnumber);
if ((pcipriv->ndis_adapter.busnumber ==
tpcipriv->ndis_adapter.busnumber) &&
(pcipriv->ndis_adapter.devnumber ==
tpcipriv->ndis_adapter.devnumber) &&
(pcipriv->ndis_adapter.funcnumber !=
tpcipriv->ndis_adapter.funcnumber)) {
if (pcipriv->ndis_adapter.busnumber ==
tpcipriv->ndis_adapter.busnumber &&
pcipriv->ndis_adapter.devnumber ==
tpcipriv->ndis_adapter.devnumber &&
pcipriv->ndis_adapter.funcnumber !=
tpcipriv->ndis_adapter.funcnumber) {
find_buddy_priv = true;
break;
}
......@@ -407,7 +404,7 @@ static void rtl_pci_get_linkcontrol_field(struct ieee80211_hw *hw)
}
static void rtl_pci_parse_configuration(struct pci_dev *pdev,
struct ieee80211_hw *hw)
struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
......@@ -441,7 +438,6 @@ static void rtl_pci_init_aspm(struct ieee80211_hw *hw)
rtl_pci_enable_aspm(hw);
RT_SET_PS_LEVEL(ppsc, RT_RF_PS_LEVEL_ALWAYS_ASPM);
}
}
static void _rtl_pci_io_handler_init(struct device *dev,
......@@ -458,11 +454,11 @@ static void _rtl_pci_io_handler_init(struct device *dev,
rtlpriv->io.read8_sync = pci_read8_sync;
rtlpriv->io.read16_sync = pci_read16_sync;
rtlpriv->io.read32_sync = pci_read32_sync;
}
static bool _rtl_update_earlymode_info(struct ieee80211_hw *hw,
struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc, u8 tid)
struct sk_buff *skb,
struct rtl_tcb_desc *tcb_desc, u8 tid)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
......@@ -520,13 +516,15 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
(rtlpriv->buddy_priv &&
rtlpriv->buddy_priv->easy_concurrent_ctl.switch_in_process)))
return;
/* we juse use em for BE/BK/VI/VO */
/* we just use em for BE/BK/VI/VO */
for (tid = 7; tid >= 0; tid--) {
u8 hw_queue = ac_to_hwq[rtl_tid_to_ac(tid)];
struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
while (!mac->act_scanning &&
rtlpriv->psc.rfpwr_state == ERFON) {
struct rtl_tcb_desc tcb_desc;
memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
spin_lock_bh(&rtlpriv->locks.waitq_lock);
......@@ -541,7 +539,8 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
spin_unlock_bh(&rtlpriv->locks.waitq_lock);
/* Some macaddr can't do early mode. like
* multicast/broadcast/no_qos data */
* multicast/broadcast/no_qos data
*/
info = IEEE80211_SKB_CB(skb);
if (info->flags & IEEE80211_TX_CTL_AMPDU)
_rtl_update_earlymode_info(hw, skb,
......@@ -552,7 +551,6 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
}
}
static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
......@@ -603,7 +601,6 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
if (prio == TXCMD_QUEUE) {
dev_kfree_skb(skb);
goto tx_status_ok;
}
/* for sw LPS, just after NULL skb send out, we can
......@@ -643,15 +640,12 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
ieee80211_tx_status_irqsafe(hw, skb);
if ((ring->entries - skb_queue_len(&ring->queue)) <= 4) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"more desc left, wake skb_queue@%d, ring->idx = %d, skb_queue_len = 0x%x\n",
prio, ring->idx,
skb_queue_len(&ring->queue));
ieee80211_wake_queue(hw,
skb_get_queue_mapping
(skb));
ieee80211_wake_queue(hw, skb_get_queue_mapping(skb));
}
tx_status_ok:
skb = NULL;
......@@ -659,7 +653,7 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
if (((rtlpriv->link_info.num_rx_inperiod +
rtlpriv->link_info.num_tx_inperiod) > 8) ||
(rtlpriv->link_info.num_rx_inperiod > 2))
rtlpriv->link_info.num_rx_inperiod > 2)
rtl_lps_leave(hw);
}
......@@ -817,7 +811,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
if (unlikely(!new_skb))
goto no_new;
memset(&rx_status , 0 , sizeof(rx_status));
memset(&rx_status, 0, sizeof(rx_status));
rtlpriv->cfg->ops->query_rx_desc(hw, &stats,
&rx_status, (u8 *)pdesc, skb);
......@@ -847,12 +841,11 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
/* handle command packet here */
if (rtlpriv->cfg->ops->rx_command_packet &&
rtlpriv->cfg->ops->rx_command_packet(hw, &stats, skb)) {
dev_kfree_skb_any(skb);
goto new_trx_end;
dev_kfree_skb_any(skb);
goto new_trx_end;
}
/*
* NOTICE This can not be use for mac80211,
/* NOTICE This can not be use for mac80211,
* this is done in mac80211 code,
* if done here sec DHCP will fail
* skb_trim(skb, skb->len - 4);
......@@ -889,9 +882,8 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
/* for sw lps */
rtl_swlps_beacon(hw, (void *)skb->data, skb->len);
rtl_recognize_peer(hw, (void *)skb->data, skb->len);
if ((rtlpriv->mac80211.opmode == NL80211_IFTYPE_AP) &&
(rtlpriv->rtlhal.current_bandtype ==
BAND_ON_2_4G) &&
if (rtlpriv->mac80211.opmode == NL80211_IFTYPE_AP &&
rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G &&
(ieee80211_is_beacon(fc) ||
ieee80211_is_probe_resp(fc))) {
dev_kfree_skb_any(skb);
......@@ -913,7 +905,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
}
if (((rtlpriv->link_info.num_rx_inperiod +
rtlpriv->link_info.num_tx_inperiod) > 8) ||
(rtlpriv->link_info.num_rx_inperiod > 2))
rtlpriv->link_info.num_rx_inperiod > 2)
rtl_lps_leave(hw);
skb = new_skb;
no_new:
......@@ -952,30 +944,27 @@ static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id)
if (rtlpci->irq_enabled == 0)
return ret;
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock , flags);
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
rtlpriv->cfg->ops->disable_interrupt(hw);
/*read ISR: 4/8bytes */
rtlpriv->cfg->ops->interrupt_recognized(hw, &inta, &intb);
/*Shared IRQ or HW disappared */
/*Shared IRQ or HW disappeared */
if (!inta || inta == 0xffff)
goto done;
/*<1> beacon related */
if (inta & rtlpriv->cfg->maps[RTL_IMR_TBDOK]) {
if (inta & rtlpriv->cfg->maps[RTL_IMR_TBDOK])
RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
"beacon ok interrupt!\n");
}
if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_TBDER])) {
if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_TBDER]))
RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
"beacon err interrupt!\n");
}
if (inta & rtlpriv->cfg->maps[RTL_IMR_BDOK]) {
if (inta & rtlpriv->cfg->maps[RTL_IMR_BDOK])
RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, "beacon interrupt!\n");
}
if (inta & rtlpriv->cfg->maps[RTL_IMR_BCNINT]) {
RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
......@@ -1130,7 +1119,7 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
/*NB: the beacon data buffer must be 32-bit aligned. */
pskb = ieee80211_beacon_get(hw, mac->vif);
if (pskb == NULL)
if (!pskb)
return;
hdr = rtl_get_hdr(pskb);
info = IEEE80211_SKB_CB(pskb);
......@@ -1152,7 +1141,6 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true, HW_DESC_OWN,
&temp_one);
}
return;
}
static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
......@@ -1171,8 +1159,7 @@ static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++)
rtlpci->txringcount[i] = desc_num;
/*
*we just alloc 2 desc for beacon queue,
/*we just alloc 2 desc for beacon queue,
*because we just need first desc in hw beacon.
*/
rtlpci->txringcount[BEACON_QUEUE] = 2;
......@@ -1189,7 +1176,7 @@ static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
}
static void _rtl_pci_init_struct(struct ieee80211_hw *hw,
struct pci_dev *pdev)
struct pci_dev *pdev)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
......@@ -1361,7 +1348,7 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw, int rxring_idx)
}
static void _rtl_pci_free_tx_ring(struct ieee80211_hw *hw,
unsigned int prio)
unsigned int prio)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
......@@ -1378,8 +1365,7 @@ static void _rtl_pci_free_tx_ring(struct ieee80211_hw *hw,
entry = (u8 *)(&ring->desc[ring->idx]);
pci_unmap_single(rtlpci->pdev,
rtlpriv->cfg->
ops->get_desc(hw, (u8 *)entry,
rtlpriv->cfg->ops->get_desc(hw, (u8 *)entry,
true,
HW_DESC_TXBUFF_ADDR),
skb->len, PCI_DMA_TODEVICE);
......@@ -1451,8 +1437,7 @@ static int _rtl_pci_init_trx_ring(struct ieee80211_hw *hw)
}
for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++) {
ret = _rtl_pci_init_tx_ring(hw, i,
rtlpci->txringcount[i]);
ret = _rtl_pci_init_tx_ring(hw, i, rtlpci->txringcount[i]);
if (ret)
goto err_free_rings;
}
......@@ -1500,7 +1485,7 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
/* force the rx_ring[RX_MPDU_QUEUE/
* RX_CMD_QUEUE].idx to the first one
*new trx flow, do nothing
*/
*/
if (!rtlpriv->use_new_trx_flow &&
rtlpci->rx_ring[rxring_idx].desc) {
struct rtl_rx_desc *entry = NULL;
......@@ -1510,8 +1495,8 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
entry = &rtlpci->rx_ring[rxring_idx].desc[i];
bufferaddress =
rtlpriv->cfg->ops->get_desc(hw, (u8 *)entry,
false , HW_DESC_RXBUFF_ADDR);
memset((u8 *)entry , 0 ,
false, HW_DESC_RXBUFF_ADDR);
memset((u8 *)entry, 0,
sizeof(*rtlpci->rx_ring
[rxring_idx].desc));/*clear one entry*/
if (rtlpriv->use_new_trx_flow) {
......@@ -1540,8 +1525,7 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
rtlpci->rx_ring[rxring_idx].idx = 0;
}
/*
*after reset, release previous pending packet,
/*after reset, release previous pending packet,
*and force the tx idx to the first one
*/
spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
......@@ -1642,7 +1626,7 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
if (rtlpriv->psc.sw_ps_enabled) {
if (ieee80211_is_data(fc) && !ieee80211_is_nullfunc(fc) &&
!ieee80211_has_pm(fc))
!ieee80211_has_pm(fc))
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
}
......@@ -1674,7 +1658,7 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
own = (u8)rtlpriv->cfg->ops->get_desc(hw, (u8 *)pdesc,
true, HW_DESC_OWN);
if ((own == 1) && (hw_queue != BEACON_QUEUE)) {
if (own == 1 && hw_queue != BEACON_QUEUE) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%x\n",
hw_queue, ring->idx, idx,
......@@ -1688,11 +1672,10 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
if (rtlpriv->cfg->ops->get_available_desc &&
rtlpriv->cfg->ops->get_available_desc(hw, hw_queue) == 0) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"get_available_desc fail\n");
spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock,
flags);
return skb->len;
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"get_available_desc fail\n");
spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
return skb->len;
}
if (ieee80211_is_data(fc))
......@@ -1751,7 +1734,7 @@ static void rtl_pci_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
ring = &pcipriv->dev.tx_ring[queue_id];
queue_len = skb_queue_len(&ring->queue);
if (queue_len == 0 || queue_id == BEACON_QUEUE ||
queue_id == TXCMD_QUEUE) {
queue_id == TXCMD_QUEUE) {
queue_id--;
continue;
} else {
......@@ -1761,7 +1744,7 @@ static void rtl_pci_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
/* we just wait 1s for all queues */
if (rtlpriv->psc.rfpwr_state == ERFOFF ||
is_hal_stop(rtlhal) || i >= 200)
is_hal_stop(rtlhal) || i >= 200)
return;
}
}
......@@ -1779,7 +1762,6 @@ static void rtl_pci_deinit(struct ieee80211_hw *hw)
flush_workqueue(rtlpriv->works.rtl_wq);
destroy_workqueue(rtlpriv->works.rtl_wq);
}
static int rtl_pci_init(struct ieee80211_hw *hw, struct pci_dev *pdev)
......@@ -1837,7 +1819,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)
rtlpci->up_first_time = false;
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "rtl_pci_start OK\n");
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%s OK\n", __func__);
return 0;
}
......@@ -1848,13 +1830,12 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
unsigned long flags;
u8 RFInProgressTimeOut = 0;
u8 rf_timeout = 0;
if (rtlpriv->cfg->ops->get_btc_status())
rtlpriv->btcoexist.btc_ops->btc_halt_notify();
/*
*should be before disable interrupt&adapter
/*should be before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
......@@ -1866,12 +1847,12 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flags);
while (ppsc->rfchange_inprogress) {
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flags);
if (RFInProgressTimeOut > 100) {
if (rf_timeout > 100) {
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flags);
break;
}
mdelay(1);
RFInProgressTimeOut++;
rf_timeout++;
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flags);
}
ppsc->rfchange_inprogress = true;
......@@ -1891,7 +1872,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
}
static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
struct ieee80211_hw *hw)
struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
......@@ -1946,13 +1927,12 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
venderid, deviceid);
rtlhal->hw_type = HARDWARE_TYPE_RTL8192SE;
break;
}
} else if (deviceid == RTL_PCI_8723AE_DID) {
rtlhal->hw_type = HARDWARE_TYPE_RTL8723AE;
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
"8723AE PCI-E is found - "
"vid/did=%x/%x\n", venderid, deviceid);
"8723AE PCI-E is found - vid/did=%x/%x\n",
venderid, deviceid);
} else if (deviceid == RTL_PCI_8192CET_DID ||
deviceid == RTL_PCI_8192CE_DID ||
deviceid == RTL_PCI_8191CE_DID ||
......@@ -1972,21 +1952,21 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"Find adapter, Hardware type is 8188EE\n");
} else if (deviceid == RTL_PCI_8723BE_DID) {
rtlhal->hw_type = HARDWARE_TYPE_RTL8723BE;
RT_TRACE(rtlpriv, COMP_INIT , DBG_LOUD,
"Find adapter, Hardware type is 8723BE\n");
rtlhal->hw_type = HARDWARE_TYPE_RTL8723BE;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"Find adapter, Hardware type is 8723BE\n");
} else if (deviceid == RTL_PCI_8192EE_DID) {
rtlhal->hw_type = HARDWARE_TYPE_RTL8192EE;
RT_TRACE(rtlpriv, COMP_INIT , DBG_LOUD,
"Find adapter, Hardware type is 8192EE\n");
rtlhal->hw_type = HARDWARE_TYPE_RTL8192EE;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"Find adapter, Hardware type is 8192EE\n");
} else if (deviceid == RTL_PCI_8821AE_DID) {
rtlhal->hw_type = HARDWARE_TYPE_RTL8821AE;
RT_TRACE(rtlpriv, COMP_INIT , DBG_LOUD,
"Find adapter, Hardware type is 8821AE\n");
rtlhal->hw_type = HARDWARE_TYPE_RTL8821AE;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"Find adapter, Hardware type is 8821AE\n");
} else if (deviceid == RTL_PCI_8812AE_DID) {
rtlhal->hw_type = HARDWARE_TYPE_RTL8812AE;
RT_TRACE(rtlpriv, COMP_INIT , DBG_LOUD,
"Find adapter, Hardware type is 8812AE\n");
rtlhal->hw_type = HARDWARE_TYPE_RTL8812AE;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"Find adapter, Hardware type is 8812AE\n");
} else {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Err: Unknown device - vid/did=%x/%x\n",
......@@ -2109,7 +2089,7 @@ static int rtl_pci_intr_mode_msi(struct ieee80211_hw *hw)
rtlpci->using_msi = true;
RT_TRACE(rtlpriv, COMP_INIT|COMP_INTR, DBG_DMESG,
RT_TRACE(rtlpriv, COMP_INIT | COMP_INTR, DBG_DMESG,
"MSI Interrupt Mode!\n");
return 0;
}
......@@ -2127,7 +2107,7 @@ static int rtl_pci_intr_mode_legacy(struct ieee80211_hw *hw)
return ret;
rtlpci->using_msi = false;
RT_TRACE(rtlpriv, COMP_INIT|COMP_INTR, DBG_DMESG,
RT_TRACE(rtlpriv, COMP_INIT | COMP_INTR, DBG_DMESG,
"Pin-based Interrupt Mode!\n");
return 0;
}
......@@ -2164,7 +2144,7 @@ static void platform_enable_dma64(struct pci_dev *pdev, bool dma64)
}
int rtl_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
const struct pci_device_id *id)
{
struct ieee80211_hw *hw = NULL;
......@@ -2343,7 +2323,6 @@ int rtl_pci_probe(struct pci_dev *pdev,
pci_disable_device(pdev);
return err;
}
EXPORT_SYMBOL(rtl_pci_probe);
......@@ -2402,20 +2381,20 @@ EXPORT_SYMBOL(rtl_pci_disconnect);
#ifdef CONFIG_PM_SLEEP
/***************************************
kernel pci power state define:
PCI_D0 ((pci_power_t __force) 0)
PCI_D1 ((pci_power_t __force) 1)
PCI_D2 ((pci_power_t __force) 2)
PCI_D3hot ((pci_power_t __force) 3)
PCI_D3cold ((pci_power_t __force) 4)
PCI_UNKNOWN ((pci_power_t __force) 5)
This function is called when system
goes into suspend state mac80211 will
call rtl_mac_stop() from the mac80211
suspend function first, So there is
no need to call hw_disable here.
****************************************/
* kernel pci power state define:
* PCI_D0 ((pci_power_t __force) 0)
* PCI_D1 ((pci_power_t __force) 1)
* PCI_D2 ((pci_power_t __force) 2)
* PCI_D3hot ((pci_power_t __force) 3)
* PCI_D3cold ((pci_power_t __force) 4)
* PCI_UNKNOWN ((pci_power_t __force) 5)
* This function is called when system
* goes into suspend state mac80211 will
* call rtl_mac_stop() from the mac80211
* suspend function first, So there is
* no need to call hw_disable here.
****************************************/
int rtl_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment