Commit ae8e530a authored by Ricardo Ribalda Delgado's avatar Ricardo Ribalda Delgado Committed by Felipe Balbi

usb: gadget: net2280: Code Cleanup

- Move logical continuations to end of line
- Improve spacing
Signed-off-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent fae3c158
......@@ -100,9 +100,9 @@ static bool use_dma_chaining;
static bool use_msi = true;
/* "modprobe net2280 use_dma=n" etc */
module_param(use_dma, bool, S_IRUGO);
module_param(use_dma_chaining, bool, S_IRUGO);
module_param(use_msi, bool, S_IRUGO);
module_param(use_dma, bool, 0444);
module_param(use_dma_chaining, bool, 0444);
module_param(use_msi, bool, 0444);
/* mode 0 == ep-{a,b,c,d} 1K fifo each
* mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
......@@ -111,7 +111,7 @@ module_param(use_msi, bool, S_IRUGO);
static ushort fifo_mode;
/* "modprobe net2280 fifo_mode=1" etc */
module_param (fifo_mode, ushort, 0644);
module_param(fifo_mode, ushort, 0644);
/* enable_suspend -- When enabled, the driver will respond to
* USB suspend requests by powering down the NET2280. Otherwise,
......@@ -121,7 +121,7 @@ module_param (fifo_mode, ushort, 0644);
static bool enable_suspend;
/* "modprobe net2280 enable_suspend=1" etc */
module_param(enable_suspend, bool, S_IRUGO);
module_param(enable_suspend, bool, 0444);
/* force full-speed operation */
static bool full_speed;
......@@ -169,8 +169,8 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 };
ep = container_of(_ep, struct net2280_ep, ep);
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT)
if (!_ep || !desc || ep->desc || _ep->name == ep0name ||
desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dev = ep->dev;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
......@@ -220,9 +220,9 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
tmp = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
if (tmp == USB_ENDPOINT_XFER_INT) {
/* erratum 0105 workaround prevents hs NYET */
if (dev->chiprev == 0100
&& dev->gadget.speed == USB_SPEED_HIGH
&& !(desc->bEndpointAddress & USB_DIR_IN))
if (dev->chiprev == 0100 &&
dev->gadget.speed == USB_SPEED_HIGH &&
!(desc->bEndpointAddress & USB_DIR_IN))
writel(BIT(CLEAR_NAK_OUT_PACKETS_MODE),
&ep->regs->ep_rsp);
} else if (tmp == USB_ENDPOINT_XFER_BULK) {
......@@ -402,8 +402,8 @@ static void ep_reset_228x(struct net2280_regs __iomem *regs,
BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
BIT(DATA_IN_TOKEN_INTERRUPT)
, &ep->regs->ep_stat);
BIT(DATA_IN_TOKEN_INTERRUPT),
&ep->regs->ep_stat);
/* fifo size is handled separately */
}
......@@ -425,9 +425,9 @@ static void ep_reset_338x(struct net2280_regs __iomem *regs,
writel(BIT(DMA_ABORT_DONE_INTERRUPT) |
BIT(DMA_PAUSE_DONE_INTERRUPT) |
BIT(DMA_SCATTER_GATHER_DONE_INTERRUPT) |
BIT(DMA_TRANSACTION_DONE_INTERRUPT)
/* | BIT(DMA_ABORT) */
, &ep->dma->dmastat);
BIT(DMA_TRANSACTION_DONE_INTERRUPT),
/* | BIT(DMA_ABORT), */
&ep->dma->dmastat);
dmastat = readl(&ep->dma->dmastat);
if (dmastat == 0x5002) {
......@@ -618,15 +618,15 @@ static void out_flush(struct net2280_ep *ep)
statp = &ep->regs->ep_stat;
writel(BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
BIT(DATA_PACKET_RECEIVED_INTERRUPT)
, statp);
BIT(DATA_PACKET_RECEIVED_INTERRUPT),
statp);
writel(BIT(FIFO_FLUSH), statp);
/* Make sure that stap is written */
mb();
tmp = readl(statp);
if (tmp & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)
if (tmp & BIT(DATA_OUT_PING_TOKEN_INTERRUPT) &&
/* high speed did bulk NYET; fifo isn't filling */
&& ep->dev->gadget.speed == USB_SPEED_FULL) {
ep->dev->gadget.speed == USB_SPEED_FULL) {
unsigned usec;
usec = 50; /* 64 byte bulk/interrupt */
......@@ -653,8 +653,8 @@ static int read_fifo(struct net2280_ep *ep, struct net2280_request *req)
/* erratum 0106 ... packets coming in during fifo reads might
* be incompletely rejected. not all cases have workarounds.
*/
if (ep->dev->chiprev == 0x0100
&& ep->dev->gadget.speed == USB_SPEED_FULL) {
if (ep->dev->chiprev == 0x0100 &&
ep->dev->gadget.speed == USB_SPEED_FULL) {
udelay(1);
tmp = readl(&ep->regs->ep_stat);
if ((tmp & BIT(NAK_OUT_PACKETS)))
......@@ -726,8 +726,8 @@ static int read_fifo(struct net2280_ep *ep, struct net2280_request *req)
(void) readl(&ep->regs->ep_rsp);
}
return is_short || ((req->req.actual == req->req.length)
&& !req->req.zero);
return is_short || ((req->req.actual == req->req.length) &&
!req->req.zero);
}
/* fill out dma descriptor to match a given request */
......@@ -744,8 +744,8 @@ static void fill_dma_desc(struct net2280_ep *ep,
*/
if (ep->is_in)
dmacount |= BIT(DMA_DIRECTION);
if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0)
|| ep->dev->pdev->device != 0x2280)
if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) ||
ep->dev->pdev->device != 0x2280)
dmacount |= BIT(END_OF_CHAIN);
req->valid = valid;
......@@ -836,8 +836,8 @@ static void start_dma(struct net2280_ep *ep, struct net2280_request *req)
/* dma irq, faking scatterlist status */
req->td->dmacount = cpu_to_le32(req->req.length - tmp);
writel(BIT(DMA_DONE_INTERRUPT_ENABLE)
| tmp, &dma->dmacount);
writel(BIT(DMA_DONE_INTERRUPT_ENABLE) | tmp,
&dma->dmacount);
req->td->dmadesc = 0;
req->valid = 1;
......@@ -1120,8 +1120,8 @@ static void scan_dma_completions(struct net2280_ep *ep)
/* single transfer mode */
dma_done(ep, req, tmp, 0);
break;
} else if (!ep->is_in
&& (req->req.length % ep->ep.maxpacket) != 0) {
} else if (!ep->is_in &&
(req->req.length % ep->ep.maxpacket) != 0) {
tmp = readl(&ep->regs->ep_stat);
if (ep->dev->pdev->vendor == PCI_VENDOR_ID_PLX)
return dma_done(ep, req, tmp, 0);
......@@ -1317,8 +1317,8 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
writel(le32_to_cpu(req->td->dmadesc),
&ep->dma->dmadesc);
if (req->td->dmacount & dma_done_ie)
writel(readl(&ep->dma->dmacount)
| le32_to_cpu(dma_done_ie),
writel(readl(&ep->dma->dmacount) |
le32_to_cpu(dma_done_ie),
&ep->dma->dmacount);
} else {
struct net2280_request *prev;
......@@ -2255,8 +2255,8 @@ static void ep0_start_228x(struct net2280 *dev)
{
writel(BIT(CLEAR_EP_HIDE_STATUS_PHASE) |
BIT(CLEAR_NAK_OUT_PACKETS) |
BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)
, &dev->epregs[0].ep_rsp);
BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE),
&dev->epregs[0].ep_rsp);
/*
* hardware optionally handles a bunch of standard requests
......@@ -2268,8 +2268,8 @@ static void ep0_start_228x(struct net2280 *dev)
BIT(SET_ADDRESS) |
BIT(DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP) |
BIT(GET_DEVICE_STATUS) |
BIT(GET_INTERFACE_STATUS)
, &dev->usb->stdrsp);
BIT(GET_INTERFACE_STATUS),
&dev->usb->stdrsp);
writel(BIT(USB_ROOT_PORT_WAKEUP_ENABLE) |
BIT(SELF_POWERED_USB_DEVICE) |
BIT(REMOTE_WAKEUP_SUPPORT) |
......@@ -2330,8 +2330,8 @@ static void ep0_start_338x(struct net2280 *dev)
/* enable irqs so we can see ep0 and general operation */
writel(BIT(SETUP_PACKET_INTERRUPT_ENABLE) |
BIT(ENDPOINT_0_INTERRUPT_ENABLE)
, &dev->regs->pciirqenb0);
BIT(ENDPOINT_0_INTERRUPT_ENABLE),
&dev->regs->pciirqenb0);
writel(BIT(PCI_INTERRUPT_ENABLE) |
BIT(ROOT_PORT_RESET_INTERRUPT_ENABLE) |
BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE) |
......@@ -2366,8 +2366,8 @@ static int net2280_start(struct usb_gadget *_gadget,
* (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
* "must not be used in normal operation"
*/
if (!driver || driver->max_speed < USB_SPEED_HIGH
|| !driver->setup)
if (!driver || driver->max_speed < USB_SPEED_HIGH ||
!driver->setup)
return -EINVAL;
dev = container_of(_gadget, struct net2280, gadget);
......@@ -2542,10 +2542,10 @@ static void handle_ep_small(struct net2280_ep *ep)
}
mode = 2;
/* an extra OUT token is an error */
} else if (((t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT))
&& req
&& req->req.actual == req->req.length)
|| (ep->responded && !req)) {
} else if (((t & BIT(DATA_OUT_PING_TOKEN_INTERRUPT)) &&
req &&
req->req.actual == req->req.length) ||
(ep->responded && !req)) {
ep->dev->protocol_stall = 1;
set_halt(ep);
ep->stopped = 1;
......@@ -2576,8 +2576,8 @@ static void handle_ep_small(struct net2280_ep *ep)
* dma handles (M >= N), may empty the queue
*/
scan_dma_completions(ep);
if (unlikely(list_empty(&ep->queue)
|| ep->out_overflow)) {
if (unlikely(list_empty(&ep->queue) ||
ep->out_overflow)) {
req = NULL;
break;
}
......@@ -2611,9 +2611,9 @@ static void handle_ep_small(struct net2280_ep *ep)
}
/* also flush to prevent erratum 0106 trouble */
if (unlikely(ep->out_overflow
|| (ep->dev->chiprev == 0x0100
&& ep->dev->gadget.speed
if (unlikely(ep->out_overflow ||
(ep->dev->chiprev == 0x0100 &&
ep->dev->gadget.speed
== USB_SPEED_FULL))) {
out_flush(ep);
ep->out_overflow = 0;
......@@ -2808,9 +2808,9 @@ static void ep_stall(struct net2280_ep *ep, int stall)
val = readl(&ep->regs->ep_rsp);
val |= BIT(CLEAR_ENDPOINT_HALT) |
BIT(CLEAR_ENDPOINT_TOGGLE);
writel(val
/* | BIT(CLEAR_NAK_PACKETS)*/
, &ep->regs->ep_rsp);
writel(val,
/* | BIT(CLEAR_NAK_PACKETS),*/
&ep->regs->ep_rsp);
ep->is_halt = 0;
val = readl(&ep->regs->ep_rsp);
}
......@@ -3125,8 +3125,8 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
BIT(DATA_PACKET_RECEIVED_INTERRUPT) |
BIT(DATA_PACKET_TRANSMITTED_INTERRUPT) |
BIT(DATA_OUT_PING_TOKEN_INTERRUPT) |
BIT(DATA_IN_TOKEN_INTERRUPT)
, &ep->regs->ep_stat);
BIT(DATA_IN_TOKEN_INTERRUPT),
&ep->regs->ep_stat);
}
u.raw[0] = readl(&dev->usb->setup0123);
u.raw[1] = readl(&dev->usb->setup4567);
......@@ -3206,8 +3206,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
if (w_value != USB_ENDPOINT_HALT
|| w_length != 0)
if (w_value != USB_ENDPOINT_HALT || w_length != 0)
goto do_stall;
e = get_ep_by_addr(dev, w_index);
if (!e)
......@@ -3233,8 +3232,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
/* hw handles device features */
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
goto delegate;
if (w_value != USB_ENDPOINT_HALT
|| w_length != 0)
if (w_value != USB_ENDPOINT_HALT || w_length != 0)
goto do_stall;
e = get_ep_by_addr(dev, w_index);
if (!e)
......@@ -3326,12 +3324,11 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat)
*/
if (stat & tmp) {
writel(tmp, &dev->regs->irqstat1);
if ((((stat & BIT(ROOT_PORT_RESET_INTERRUPT))
&& ((readl(&dev->usb->usbstat) & mask)
== 0))
|| ((readl(&dev->usb->usbctl)
& BIT(VBUS_PIN)) == 0)
) && (dev->gadget.speed != USB_SPEED_UNKNOWN)) {
if ((((stat & BIT(ROOT_PORT_RESET_INTERRUPT)) &&
(readl(&dev->usb->usbstat) & mask)) ||
((readl(&dev->usb->usbctl) &
BIT(VBUS_PIN)) == 0)) &&
(dev->gadget.speed != USB_SPEED_UNKNOWN)) {
DEBUG(dev, "disconnect %s\n",
dev->driver->driver.name);
stop_activity(dev, dev->driver);
......@@ -3560,7 +3557,7 @@ static void net2280_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
device_remove_file(&pdev->dev, &dev_attr_registers);
INFO (dev, "unbind\n");
INFO(dev, "unbind\n");
}
/* wrap this driver around the specified device, but
......@@ -3783,14 +3780,14 @@ static const struct pci_device_id pci_ids[] = { {
.device = 0x2280,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
}, {
}, {
.class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_PLX_LEGACY,
.device = 0x2282,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
},
{
.class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
.class_mask = ~0,
......
......@@ -117,8 +117,8 @@ static inline void allow_status(struct net2280_ep *ep)
/* ep0 only */
writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
BIT(CLEAR_NAK_OUT_PACKETS) |
BIT(CLEAR_NAK_OUT_PACKETS_MODE)
, &ep->regs->ep_rsp);
BIT(CLEAR_NAK_OUT_PACKETS_MODE),
&ep->regs->ep_rsp);
ep->stopped = 1;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment