Merge tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Back to regular scheduled fixes pull request, mainly a bunch of msm,
  some i915 and otherwise a few scattered, one memory crasher in the
  nouveau GSP paths is helping stabilise that work.

  msm:
   - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
   - Remove duplicate call to drm_kms_helper_poll_init() in
     msm_drm_init()
   - Fix the safe_lut_tbl[] for sc8280xp to match downstream
   - Don't attach the drm_dp_set_subconnector_property() for eDP
   - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
     there is a bootup crash on multiple targets
   - Remove unnecessary NULL check left behind during cleanup

  i915:
   - Fix race between DP MST connectore registration and setup
   - Fix GT memory leak on probe error path

  panel:
   - Fixes for innolux and auo,b101uan08.3 panel.
   - Fix Himax83102-j02 timings.

  ivpu:
   - Fix ivpu MMIO reset.

  ast:
   - AST fix on connetor disconnection.

  nouveau:
   - gsp memory corruption fix

  rockchip:
   - color fix"

* tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm:
  nouveau/gsp: allocate enough space for all channel ids.
  drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP
  drm/ast: Disconnect BMC if physical connector is connected
  accel/ivpu/37xx: Fix hangs related to MMIO reset
  drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full
  drm/i915: do not clean GT table on error path
  drm/i915/dp_mst: Fix race between connector registration and setup
  drm/panel: simple: Fix Innolux G101ICE-L01 timings
  drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
  drm/msm: remove unnecessary NULL check
  drm/panel: auo,b101uan08.3: Fine tune the panel power sequence
  drm/msm/dp: attach the DP subconnector property
  drm/msm/dp: don't touch DP subconnector property in eDP case
  drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog
  drm/msm: remove exra drm_kms_helper_poll_init() call
  drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy

drivers/accel/ivpu/ivpu_hw_37xx.c

@@ -502,6 +502,16 @@ static int ivpu_boot_pwr_domain_enable(struct ivpu_device *vdev)
 	return ret;
 }
 
+static int ivpu_boot_pwr_domain_disable(struct ivpu_device *vdev)
+{
+	ivpu_boot_dpu_active_drive(vdev, false);
+	ivpu_boot_pwr_island_isolation_drive(vdev, true);
+	ivpu_boot_pwr_island_trickle_drive(vdev, false);
+	ivpu_boot_pwr_island_drive(vdev, false);
+
+	return ivpu_boot_wait_for_pwr_island_status(vdev, 0x0);
+}
+
 static void ivpu_boot_no_snoop_enable(struct ivpu_device *vdev)
 {
 	u32 val = REGV_RD32(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES);
@@ -600,25 +610,17 @@ static int ivpu_hw_37xx_info_init(struct ivpu_device *vdev)
 
 static int ivpu_hw_37xx_reset(struct ivpu_device *vdev)
 {
-	int ret;
-	u32 val;
-
-	if (IVPU_WA(punit_disabled))
-		return 0;
+	int ret = 0;
 
-	ret = REGB_POLL_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, 0, TIMEOUT_US);
-	if (ret) {
-		ivpu_err(vdev, "Timed out waiting for TRIGGER bit\n");
-		return ret;
+	if (ivpu_boot_pwr_domain_disable(vdev)) {
+		ivpu_err(vdev, "Failed to disable power domain\n");
+		ret = -EIO;
 	}
 
-	val = REGB_RD32(VPU_37XX_BUTTRESS_VPU_IP_RESET);
-	val = REG_SET_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, val);
-	REGB_WR32(VPU_37XX_BUTTRESS_VPU_IP_RESET, val);
-
-	ret = REGB_POLL_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, 0, TIMEOUT_US);
-	if (ret)
-		ivpu_err(vdev, "Timed out waiting for RESET completion\n");
+	if (ivpu_pll_disable(vdev)) {
+		ivpu_err(vdev, "Failed to disable PLL\n");
+		ret = -EIO;
+	}
 
 	return ret;
 }
@@ -651,10 +653,6 @@ static int ivpu_hw_37xx_power_up(struct ivpu_device *vdev)
 {
 	int ret;
 
-	ret = ivpu_hw_37xx_reset(vdev);
-	if (ret)
-		ivpu_warn(vdev, "Failed to reset HW: %d\n", ret);
-
 	ret = ivpu_hw_37xx_d0i3_disable(vdev);
 	if (ret)
 		ivpu_warn(vdev, "Failed to disable D0I3: %d\n", ret);
@@ -722,11 +720,11 @@ static int ivpu_hw_37xx_power_down(struct ivpu_device *vdev)
 {
 	int ret = 0;
 
-	if (!ivpu_hw_37xx_is_idle(vdev) && ivpu_hw_37xx_reset(vdev))
-		ivpu_err(vdev, "Failed to reset the VPU\n");
+	if (!ivpu_hw_37xx_is_idle(vdev))
+		ivpu_warn(vdev, "VPU not idle during power down\n");
 
-	if (ivpu_pll_disable(vdev)) {
-		ivpu_err(vdev, "Failed to disable PLL\n");
+	if (ivpu_hw_37xx_reset(vdev)) {
+		ivpu_err(vdev, "Failed to reset VPU\n");
 		ret = -EIO;
 	}
 

drivers/gpu/drm/ast/ast_drv.h

@@ -174,6 +174,17 @@ to_ast_sil164_connector(struct drm_connector *connector)
 	return container_of(connector, struct ast_sil164_connector, base);
 }
 
+struct ast_bmc_connector {
+	struct drm_connector base;
+	struct drm_connector *physical_connector;
+};
+
+static inline struct ast_bmc_connector *
+to_ast_bmc_connector(struct drm_connector *connector)
+{
+	return container_of(connector, struct ast_bmc_connector, base);
+}
+
 /*
  * Device
  */
@@ -218,7 +229,7 @@ struct ast_device {
 		} astdp;
 		struct {
 			struct drm_encoder encoder;
-			struct drm_connector connector;
+			struct ast_bmc_connector bmc_connector;
 		} bmc;
 	} output;
 

drivers/gpu/drm/ast/ast_mode.c

@@ -1767,6 +1767,30 @@ static const struct drm_encoder_funcs ast_bmc_encoder_funcs = {
 	.destroy = drm_encoder_cleanup,
 };
 
+static int ast_bmc_connector_helper_detect_ctx(struct drm_connector *connector,
+					       struct drm_modeset_acquire_ctx *ctx,
+					       bool force)
+{
+	struct ast_bmc_connector *bmc_connector = to_ast_bmc_connector(connector);
+	struct drm_connector *physical_connector = bmc_connector->physical_connector;
+
+	/*
+	 * Most user-space compositors cannot handle more than one connected
+	 * connector per CRTC. Hence, we only mark the BMC as connected if the
+	 * physical connector is disconnected. If the physical connector's status
+	 * is connected or unknown, the BMC remains disconnected. This has no
+	 * effect on the output of the BMC.
+	 *
+	 * FIXME: Remove this logic once user-space compositors can handle more
+	 *        than one connector per CRTC. The BMC should always be connected.
+	 */
+
+	if (physical_connector && physical_connector->status == connector_status_disconnected)
+		return connector_status_connected;
+
+	return connector_status_disconnected;
+}
+
 static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector)
 {
 	return drm_add_modes_noedid(connector, 4096, 4096);
@@ -1774,6 +1798,7 @@ static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector)
 
 static const struct drm_connector_helper_funcs ast_bmc_connector_helper_funcs = {
 	.get_modes = ast_bmc_connector_helper_get_modes,
+	.detect_ctx = ast_bmc_connector_helper_detect_ctx,
 };
 
 static const struct drm_connector_funcs ast_bmc_connector_funcs = {
@@ -1784,12 +1809,33 @@ static const struct drm_connector_funcs ast_bmc_connector_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
-static int ast_bmc_output_init(struct ast_device *ast)
+static int ast_bmc_connector_init(struct drm_device *dev,
+				  struct ast_bmc_connector *bmc_connector,
+				  struct drm_connector *physical_connector)
+{
+	struct drm_connector *connector = &bmc_connector->base;
+	int ret;
+
+	ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs,
+				 DRM_MODE_CONNECTOR_VIRTUAL);
+	if (ret)
+		return ret;
+
+	drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs);
+
+	bmc_connector->physical_connector = physical_connector;
+
+	return 0;
+}
+
+static int ast_bmc_output_init(struct ast_device *ast,
+			       struct drm_connector *physical_connector)
 {
 	struct drm_device *dev = &ast->base;
 	struct drm_crtc *crtc = &ast->crtc;
 	struct drm_encoder *encoder = &ast->output.bmc.encoder;
-	struct drm_connector *connector = &ast->output.bmc.connector;
+	struct ast_bmc_connector *bmc_connector = &ast->output.bmc.bmc_connector;
+	struct drm_connector *connector = &bmc_connector->base;
 	int ret;
 
 	ret = drm_encoder_init(dev, encoder,
@@ -1799,13 +1845,10 @@ static int ast_bmc_output_init(struct ast_device *ast)
 		return ret;
 	encoder->possible_crtcs = drm_crtc_mask(crtc);
 
-	ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs,
-				 DRM_MODE_CONNECTOR_VIRTUAL);
+	ret = ast_bmc_connector_init(dev, bmc_connector, physical_connector);
 	if (ret)
 		return ret;
 
-	drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs);
-
 	ret = drm_connector_attach_encoder(connector, encoder);
 	if (ret)
 		return ret;
@@ -1864,6 +1907,7 @@ static const struct drm_mode_config_funcs ast_mode_config_funcs = {
 int ast_mode_config_init(struct ast_device *ast)
 {
 	struct drm_device *dev = &ast->base;
+	struct drm_connector *physical_connector = NULL;
 	int ret;
 
 	ret = drmm_mode_config_init(dev);
@@ -1904,23 +1948,27 @@ int ast_mode_config_init(struct ast_device *ast)
 		ret = ast_vga_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.vga.vga_connector.base;
 	}
 	if (ast->tx_chip_types & AST_TX_SIL164_BIT) {
 		ret = ast_sil164_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.sil164.sil164_connector.base;
 	}
 	if (ast->tx_chip_types & AST_TX_DP501_BIT) {
 		ret = ast_dp501_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.dp501.connector;
 	}
 	if (ast->tx_chip_types & AST_TX_ASTDP_BIT) {
 		ret = ast_astdp_output_init(ast);
 		if (ret)
 			return ret;
+		physical_connector = &ast->output.astdp.connector;
 	}
-	ret = ast_bmc_output_init(ast);
+	ret = ast_bmc_output_init(ast, physical_connector);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/i915/display/intel_dp_mst.c

@@ -1161,6 +1161,14 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
 	intel_connector->port = port;
 	drm_dp_mst_get_port_malloc(port);
 
+	/*
+	 * TODO: set the AUX for the actual MST port decompressing the stream.
+	 * At the moment the driver only supports enabling this globally in the
+	 * first downstream MST branch, via intel_dp's (root port) AUX.
+	 */
+	intel_connector->dp.dsc_decompression_aux = &intel_dp->aux;
+	intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
+
 	connector = &intel_connector->base;
 	ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
 				 DRM_MODE_CONNECTOR_DisplayPort);
@@ -1172,14 +1180,6 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
 
 	drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs);
 
-	/*
-	 * TODO: set the AUX for the actual MST port decompressing the stream.
-	 * At the moment the driver only supports enabling this globally in the
-	 * first downstream MST branch, via intel_dp's (root port) AUX.
-	 */
-	intel_connector->dp.dsc_decompression_aux = &intel_dp->aux;
-	intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
-
 	for_each_pipe(dev_priv, pipe) {
 		struct drm_encoder *enc =
 			&intel_dp->mst_encoders[pipe]->base.base;

drivers/gpu/drm/i915/gt/intel_gt.c

@@ -982,8 +982,6 @@ int intel_gt_probe_all(struct drm_i915_private *i915)
 
 err:
 	i915_probe_error(i915, "Failed to initialize %s! (%d)\n", gtdef->name, ret);
-	intel_gt_release_all(i915);
-
 	return ret;
 }
 
@@ -1002,15 +1000,6 @@ int intel_gt_tiles_init(struct drm_i915_private *i915)
 	return 0;
 }
 
-void intel_gt_release_all(struct drm_i915_private *i915)
-{
-	struct intel_gt *gt;
-	unsigned int id;
-
-	for_each_gt(gt, i915, id)
-		i915->gt[id] = NULL;
-}
-
 void intel_gt_info_print(const struct intel_gt_info *info,
 			 struct drm_printer *p)
 {

drivers/gpu/drm/i915/i915_driver.c

@@ -782,7 +782,7 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ret = i915_driver_mmio_probe(i915);
 	if (ret < 0)
-		goto out_tiles_cleanup;
+		goto out_runtime_pm_put;
 
 	ret = i915_driver_hw_probe(i915);
 	if (ret < 0)
@@ -842,8 +842,6 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	i915_ggtt_driver_late_release(i915);
 out_cleanup_mmio:
 	i915_driver_mmio_release(i915);
-out_tiles_cleanup:
-	intel_gt_release_all(i915);
 out_runtime_pm_put:
 	enable_rpm_wakeref_asserts(&i915->runtime_pm);
 	i915_driver_late_release(i915);

drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h

@@ -406,6 +406,7 @@ static const struct dpu_perf_cfg sc8280xp_perf_data = {
 	.min_llcc_ib = 0,
 	.min_dram_ib = 800000,
 	.danger_lut_tbl = {0xf, 0xffff, 0x0},
+	.safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sc8180x_qos_linear),
 		.entries = sc8180x_qos_linear

drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c

@@ -844,7 +844,6 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
 
 	return 0;
 fail:
-	if (mdp5_kms)
 	mdp5_destroy(mdp5_kms);
 	return ret;
 }

drivers/gpu/drm/msm/dp/dp_display.c

@@ -365,9 +365,11 @@ static int dp_display_send_hpd_notification(struct dp_display_private *dp,
 	/* reset video pattern flag on disconnect */
 	if (!hpd) {
 		dp->panel->video_test = false;
+		if (!dp->dp_display.is_edp)
 			drm_dp_set_subconnector_property(dp->dp_display.connector,
 							 connector_status_disconnected,
-						 dp->panel->dpcd, dp->panel->downstream_ports);
+							 dp->panel->dpcd,
+							 dp->panel->downstream_ports);
 	}
 
 	dp->dp_display.is_connected = hpd;
@@ -396,8 +398,11 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
 
 	dp_link_process_request(dp->link);
 
-	drm_dp_set_subconnector_property(dp->dp_display.connector, connector_status_connected,
-					 dp->panel->dpcd, dp->panel->downstream_ports);
+	if (!dp->dp_display.is_edp)
+		drm_dp_set_subconnector_property(dp->dp_display.connector,
+						 connector_status_connected,
+						 dp->panel->dpcd,
+						 dp->panel->downstream_ports);
 
 	edid = dp->panel->edid;
 

drivers/gpu/drm/msm/dp/dp_drm.c

@@ -345,6 +345,9 @@ struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display, struct dr
 	if (IS_ERR(connector))
 		return connector;
 
+	if (!dp_display->is_edp)
+		drm_connector_attach_dp_subconnector_property(connector);
+
 	drm_connector_attach_encoder(connector, encoder);
 
 	return connector;

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

@@ -918,7 +918,7 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
 		if (phy->cphy_mode) {
 			vreg_ctrl_0 = 0x45;
-			vreg_ctrl_1 = 0x45;
+			vreg_ctrl_1 = 0x41;
 			glbl_rescode_top_ctrl = 0x00;
 			glbl_rescode_bot_ctrl = 0x00;
 		} else {

drivers/gpu/drm/msm/msm_drv.c

@@ -288,8 +288,6 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)
 	if (ret)
 		goto err_msm_uninit;
 
-	drm_kms_helper_poll_init(ddev);
-
 	if (priv->kms_init) {
 		drm_kms_helper_poll_init(ddev);
 		msm_fbdev_setup(ddev);

drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c

@@ -539,7 +539,7 @@ r535_fifo_runl_ctor(struct nvkm_fifo *fifo)
 	struct nvkm_runl *runl;
 	struct nvkm_engn *engn;
 	u32 cgids = 2048;
-	u32 chids = 2048 / CHID_PER_USERD;
+	u32 chids = 2048;
 	int ret;
 	NV2080_CTRL_FIFO_GET_DEVICE_INFO_TABLE_PARAMS *ctrl;
 

drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

@@ -1709,6 +1709,7 @@ static const struct panel_desc auo_b101uan08_3_desc = {
 	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
 		      MIPI_DSI_MODE_LPM,
 	.init_cmds = auo_b101uan08_3_init_cmd,
+	.lp11_before_reset = true,
 };
 
 static const struct drm_display_mode boe_tv105wum_nw0_default_mode = {
@@ -1766,11 +1767,11 @@ static const struct panel_desc starry_qfh032011_53g_desc = {
 };
 
 static const struct drm_display_mode starry_himax83102_j02_default_mode = {
-	.clock = 161600,
+	.clock = 162850,
 	.hdisplay = 1200,
-	.hsync_start = 1200 + 40,
-	.hsync_end = 1200 + 40 + 20,
-	.htotal = 1200 + 40 + 20 + 40,
+	.hsync_start = 1200 + 50,
+	.hsync_end = 1200 + 50 + 20,
+	.htotal = 1200 + 50 + 20 + 50,
 	.vdisplay = 1920,
 	.vsync_start = 1920 + 116,
 	.vsync_end = 1920 + 116 + 8,

drivers/gpu/drm/panel/panel-simple.c

@@ -2379,13 +2379,13 @@ static const struct panel_desc innolux_g070y2_t02 = {
 static const struct display_timing innolux_g101ice_l01_timing = {
 	.pixelclock = { 60400000, 71100000, 74700000 },
 	.hactive = { 1280, 1280, 1280 },
-	.hfront_porch = { 41, 80, 100 },
-	.hback_porch = { 40, 79, 99 },
-	.hsync_len = { 1, 1, 1 },
+	.hfront_porch = { 30, 60, 70 },
+	.hback_porch = { 30, 60, 70 },
+	.hsync_len = { 22, 40, 60 },
 	.vactive = { 800, 800, 800 },
-	.vfront_porch = { 5, 11, 14 },
-	.vback_porch = { 4, 11, 14 },
-	.vsync_len = { 1, 1, 1 },
+	.vfront_porch = { 3, 8, 14 },
+	.vback_porch = { 3, 8, 14 },
+	.vsync_len = { 4, 7, 12 },
 	.flags = DISPLAY_FLAGS_DE_HIGH,
 };
 
@@ -2402,6 +2402,7 @@ static const struct panel_desc innolux_g101ice_l01 = {
 		.disable = 200,
 	},
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -247,14 +247,22 @@ static inline void vop_cfg_done(struct vop *vop)
 	VOP_REG_SET(vop, common, cfg_done, 1);
 }
 
-static bool has_rb_swapped(uint32_t format)
+static bool has_rb_swapped(uint32_t version, uint32_t format)
 {
 	switch (format) {
 	case DRM_FORMAT_XBGR8888:
 	case DRM_FORMAT_ABGR8888:
-	case DRM_FORMAT_BGR888:
 	case DRM_FORMAT_BGR565:
 		return true;
+	/*
+	 * full framework (IP version 3.x) only need rb swapped for RGB888 and
+	 * little framework (IP version 2.x) only need rb swapped for BGR888,
+	 * check for 3.x to also only rb swap BGR888 for unknown vop version
+	 */
+	case DRM_FORMAT_RGB888:
+		return VOP_MAJOR(version) == 3;
+	case DRM_FORMAT_BGR888:
+		return VOP_MAJOR(version) != 3;
 	default:
 		return false;
 	}
@@ -1030,7 +1038,7 @@ static void vop_plane_atomic_update(struct drm_plane *plane,
 	VOP_WIN_SET(vop, win, dsp_info, dsp_info);
 	VOP_WIN_SET(vop, win, dsp_st, dsp_st);
 
-	rb_swap = has_rb_swapped(fb->format->format);
+	rb_swap = has_rb_swapped(vop->data->version, fb->format->format);
 	VOP_WIN_SET(vop, win, rb_swap, rb_swap);
 
 	/*