arm64: dts: zynqmp: Add DisplayPort subsystem

Add a DT node for the DisplayPort subsystem, a hard IP present in the
Zynq Ultrascale+ MPSoC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/4d978aef852cacdfb35aa8e50d648a787e73b90c.1611232558.git.michal.simek@xilinx.com

arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi

@@ -231,3 +231,9 @@ &lpd_watchdog {
 &zynqmp_dpdma {
 	clocks = <&zynqmp_clk DPDMA_REF>;
 };
+
+&zynqmp_dpsub {
+	clocks = <&zynqmp_clk TOPSW_LSBUS>,
+		 <&zynqmp_clk DP_AUDIO_REF>,
+		 <&zynqmp_clk DP_VIDEO_REF>;
+};

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -12,6 +12,7 @@
  * the License, or (at your option) any later version.
  */
 
+#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
 #include <dt-bindings/power/xlnx-zynqmp-power.h>
 #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
 
@@ -857,5 +858,26 @@ zynqmp_dpdma: dma-controller@fd4c0000 {
 			clock-names = "axi_clk";
 			#dma-cells = <1>;
 		};
+
+		zynqmp_dpsub: display@fd4a0000 {
+			compatible = "xlnx,zynqmp-dpsub-1.7";
+			status = "disabled";
+			reg = <0x0 0xfd4a0000 0x0 0x1000>,
+			      <0x0 0xfd4aa000 0x0 0x1000>,
+			      <0x0 0xfd4ab000 0x0 0x1000>,
+			      <0x0 0xfd4ac000 0x0 0x1000>;
+			reg-names = "dp", "blend", "av_buf", "aud";
+			interrupts = <0 119 4>;
+			interrupt-parent = <&gic>;
+			clock-names = "dp_apb_clk", "dp_aud_clk",
+				      "dp_vtc_pixel_clk_in";
+			power-domains = <&zynqmp_firmware PD_DP>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
+			dma-names = "vid0", "vid1", "vid2", "gfx0";
+			dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+		};
 	};
 };