Commit b13c7a88 authored by Łukasz Stelmach's avatar Łukasz Stelmach Committed by Jakub Kicinski

dt-bindings: net: Add bindings for AX88796C SPI Ethernet Adapter

Add bindings for AX88796C SPI Ethernet Adapter.
Signed-off-by: default avatarŁukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 4def0acb
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ASIX AX88796C SPI Ethernet Adapter
maintainers:
- Łukasz Stelmach <l.stelmach@samsung.com>
description: |
ASIX AX88796C is an Ethernet controller with a built in PHY. This
describes SPI mode of the chip.
The node for this driver must be a child node of an SPI controller,
hence all mandatory properties described in
../spi/spi-controller.yaml must be specified.
allOf:
- $ref: ethernet-controller.yaml#
properties:
compatible:
const: asix,ax88796c
reg:
maxItems: 1
spi-max-frequency:
maximum: 40000000
interrupts:
maxItems: 1
reset-gpios:
description:
A GPIO line handling reset of the chip. As the line is active low,
it should be marked GPIO_ACTIVE_LOW.
maxItems: 1
local-mac-address: true
mac-address: true
required:
- compatible
- reg
- spi-max-frequency
- interrupts
- reset-gpios
additionalProperties: false
examples:
# Artik5 eval board
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
spi0 {
#address-cells = <1>;
#size-cells = <0>;
ethernet@0 {
compatible = "asix,ax88796c";
reg = <0x0>;
local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
interrupt-parent = <&gpx2>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <40000000>;
reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment