Merge branch 'mv88e6xxx-rework-reset-and-PPU-code'
Vivien Didelot says:
====================
net: dsa: mv88e6xxx: rework reset and PPU code
Old Marvell chips (like 88E6060) don't have a PHY Polling Unit (PPU).
Next chips (like 88E6185) have a PPU, which has exclusive access to the
PHY registers, thus must be disabled before access.
Newer chips (like 88E6352) have an indirect mechanism to access the PHY
registers whenever, thus loose control over the PPU (always enabled).
Here's a summary:
Model | PPU? | Has PPU ctrl? | PPU state readable? | PHY access
----- | ---- | -------------- | ------------------- | ----------
6060 | no | no | no | direct
6185 | yes | yes, PPUEn bit | yes, PPUState 2-bit | direct w/ PPU dis.
6352 | yes | no | yes, PPUState 1-bit | indirect
6390 | yes | no | yes, InitState bit | indirect
Depending on the PPU control, a switch may have to restart the PPU when
resetting the switch. Once the switch is reset, we must wait for the PPU
state to be active polling again before accessing the registers.
For that purpose, add new operations to the chips to enable/disable the
PPU, and execute software reset. With these new ops in place, rework the
switch reset code and finally get rid of the MV88E6XXX_FLAG_PPU* flags.
Changes in v3:
- consider 6097 as 6352 (no PPU ops and use mv88e6352_g1_reset).
Changes in v2:
- wait in ppu/reset ops so that ppu_polling is not needed anymore.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment