Commit b374d522 authored by Jakub Kicinski's avatar Jakub Kicinski

Merge branch 'rework-tx-fault-fixups'

Russell King says:

====================
Rework tx fault fixups

This series reworks the tx-fault fixup and then improves the Nokia GPON
workaround to also ignore the RX LOS signal as well. We do this by
introducing a mask of hardware pin states that should be ignored,
converting the tx-fault fixup to use that, and then augmenting it for
RX LOS.
====================

Link: https://lore.kernel.org/r/ZRwYJXRizvkhm83M@shell.armlinux.org.ukSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents 98bdeae9 5ffe330e
......@@ -257,6 +257,7 @@ struct sfp {
unsigned int state_hw_drive;
unsigned int state_hw_mask;
unsigned int state_soft_mask;
unsigned int state_ignore_mask;
unsigned int state;
struct delayed_work poll;
......@@ -280,7 +281,6 @@ struct sfp {
unsigned int rs_state_mask;
bool have_a2;
bool tx_fault_ignore;
const struct sfp_quirk *quirk;
......@@ -345,9 +345,24 @@ static void sfp_fixup_long_startup(struct sfp *sfp)
sfp->module_t_start_up = T_START_UP_BAD_GPON;
}
static void sfp_fixup_ignore_los(struct sfp *sfp)
{
/* This forces LOS to zero, so we ignore transitions */
sfp->state_ignore_mask |= SFP_F_LOS;
/* Make sure that LOS options are clear */
sfp->id.ext.options &= ~cpu_to_be16(SFP_OPTIONS_LOS_INVERTED |
SFP_OPTIONS_LOS_NORMAL);
}
static void sfp_fixup_ignore_tx_fault(struct sfp *sfp)
{
sfp->tx_fault_ignore = true;
sfp->state_ignore_mask |= SFP_F_TX_FAULT;
}
static void sfp_fixup_nokia(struct sfp *sfp)
{
sfp_fixup_long_startup(sfp);
sfp_fixup_ignore_los(sfp);
}
// For 10GBASE-T short-reach modules
......@@ -446,7 +461,7 @@ static const struct sfp_quirk sfp_quirks[] = {
// Alcatel Lucent G-010S-A can operate at 2500base-X, but report 3.2GBd
// NRZ in their EEPROM
SFP_QUIRK("ALCATELLUCENT", "3FE46541AA", sfp_quirk_2500basex,
sfp_fixup_long_startup),
sfp_fixup_nokia),
// Fiberstore SFP-10G-T doesn't identify as copper, and uses the
// Rollball protocol to talk to the PHY.
......@@ -792,7 +807,8 @@ static void sfp_soft_start_poll(struct sfp *sfp)
mutex_lock(&sfp->st_mutex);
// Poll the soft state for hardware pins we want to ignore
sfp->state_soft_mask = ~sfp->state_hw_mask & mask;
sfp->state_soft_mask = ~sfp->state_hw_mask & ~sfp->state_ignore_mask &
mask;
if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) &&
!sfp->need_poll)
......@@ -2317,7 +2333,7 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
sfp->module_t_start_up = T_START_UP;
sfp->module_t_wait = T_WAIT;
sfp->tx_fault_ignore = false;
sfp->state_ignore_mask = 0;
if (sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SFI ||
sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SR ||
......@@ -2340,6 +2356,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
if (sfp->quirk && sfp->quirk->fixup)
sfp->quirk->fixup(sfp);
sfp->state_hw_mask &= ~sfp->state_ignore_mask;
mutex_unlock(&sfp->st_mutex);
return 0;
......@@ -2841,9 +2859,6 @@ static void sfp_check_state(struct sfp *sfp)
mutex_lock(&sfp->st_mutex);
state = sfp_get_state(sfp);
changed = state ^ sfp->state;
if (sfp->tx_fault_ignore)
changed &= SFP_F_PRESENT | SFP_F_LOS;
else
changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
for (i = 0; i < GPIO_MAX; i++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment