Skip to content

L
linux
Commit b64b0b76 authored by Pavel Machek's avatar Pavel Machek Committed by Eric Miao
Browse files
Options

[ARM] pxa/zaurus: cleanup sharpsl_pm.c 

This fixes checkpatch/style problems in sharpsl_pm.c, allowing me to
submit real fixes next.
Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarEric Miao <eric.y.miao@gmail.com>
parent 61333c63
Show whitespace changes
Inline Side-by-side
Showing with 59 additions and 59 deletions
arch/arm/mach-pxa/sharpsl_pm.c
View file @ b64b0b76
......@@ -165,19 +165,20 @@ struct battery_thresh spitz_battery_levels_noac[] = {
};
/* MAX1111 Commands */
#define MAXCTRL_PD0 1u << 0
#define MAXCTRL_PD1 1u << 1
#define MAXCTRL_SGL 1u << 2
#define MAXCTRL_UNI 1u << 3
#define MAXCTRL_PD0 (1u << 0)
#define MAXCTRL_PD1 (1u << 1)
#define MAXCTRL_SGL (1u << 2)
#define MAXCTRL_UNI (1u << 3)
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR 1u << 7
#define MAXCTRL_STR (1u << 7)
/*
* Read MAX1111 ADC
*/
int sharpsl_pm_pxa_read_max1111(int channel)
{
if (machine_is_tosa()) // Ugly, better move this function into another module
/* Ugly, better move this function into another module */
if (machine_is_tosa())
return 0;
#ifdef CONFIG_CORGI_SSP_DEPRECATED
......@@ -238,7 +239,7 @@ EXPORT_SYMBOL(sharpsl_battery_kick);
static void sharpsl_battery_thread(struct work_struct *private_)
{
int voltage, percent, apm_status, i = 0;
int voltage, percent, apm_status, i;
if (!sharpsl_pm.machinfo)
return;
......@@ -250,15 +251,14 @@ static void sharpsl_battery_thread(struct work_struct *private_)
&& time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
schedule_delayed_work(&toggle_charger, 0);
while(1) {
for (i = 0; i < 5; i++) {
voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
if (voltage > 0) break;
if (i++ > 5) {
voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
if (voltage > 0)
break;
}
if (voltage <= 0) {
voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
}
voltage = sharpsl_average_value(voltage);
......@@ -267,7 +267,9 @@ static void sharpsl_battery_thread(struct work_struct *private_)
/* At low battery voltages, the voltage has a tendency to start
creeping back up so we try to avoid this here */
if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
|| (apm_status == APM_BATTERY_STATUS_HIGH)
|| percent <= sharpsl_pm.battstat.mainbat_percent) {
sharpsl_pm.battstat.mainbat_voltage = voltage;
sharpsl_pm.battstat.mainbat_status = apm_status;
sharpsl_pm.battstat.mainbat_percent = percent;
......@@ -279,8 +281,8 @@ static void sharpsl_battery_thread(struct work_struct *private_)
#ifdef CONFIG_BACKLIGHT_CORGI
/* If battery is low. limit backlight intensity to save power. */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
|| (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
sharpsl_pm.machinfo->backlight_limit(1);
sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
......@@ -346,7 +348,7 @@ static void sharpsl_charge_error(void)
static void sharpsl_charge_toggle(struct work_struct *private_)
{
dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
sharpsl_charge_off();
......@@ -368,7 +370,7 @@ static void sharpsl_ac_timer(unsigned long data)
{
int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
sharpsl_average_clear();
if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
......@@ -472,14 +474,14 @@ static int sharpsl_average_value(int ad)
sharpsl_ad[sharpsl_ad_index] = ad;
sharpsl_ad_index++;
if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
sharpsl_ad[i] = sharpsl_ad[i+1];
sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
}
for (i=0; i < sharpsl_ad_index; i++)
for (i = 0; i < sharpsl_ad_index; i++)
ad_val += sharpsl_ad[i];
return (ad_val / sharpsl_ad_index);
return ad_val / sharpsl_ad_index;
}
/*
......@@ -492,8 +494,8 @@ static int get_select_val(int *val)
/* Find MAX val */
temp = val[0];
j=0;
for (i=1; i<5; i++) {
j = 0;
for (i = 1; i < 5; i++) {
if (temp < val[i]) {
temp = val[i];
j = i;
......@@ -502,21 +504,21 @@ static int get_select_val(int *val)
/* Find MIN val */
temp = val[4];
k=4;
for (i=3; i>=0; i--) {
k = 4;
for (i = 3; i >= 0; i--) {
if (temp > val[i]) {
temp = val[i];
k = i;
}
}
for (i=0; i<5; i++)
if (i != j && i != k )
for (i = 0; i < 5; i++)
if (i != j && i != k)
sum += val[i];
dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
return (sum/3);
return sum/3;
}
static int sharpsl_check_battery_temp(void)
......@@ -524,7 +526,7 @@ static int sharpsl_check_battery_temp(void)
int val, i, buff[5];
/* Check battery temperature */
for (i=0; i<5; i++) {
for (i = 0; i < 5; i++) {
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
sharpsl_pm.machinfo->measure_temp(1);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
......@@ -557,7 +559,7 @@ static int sharpsl_check_battery_voltage(void)
sharpsl_pm.machinfo->discharge1(1);
/* Check battery voltage */
for (i=0; i<5; i++) {
for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
}
......@@ -581,16 +583,16 @@ static int sharpsl_ac_check(void)
{
int temp, i, buff[5];
for (i=0; i<5; i++) {
for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
}
temp = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
return -1;
}
......@@ -624,9 +626,9 @@ static int sharpsl_pm_resume(struct platform_device *pdev)
static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
/* not charging and AC-IN! */
if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
......@@ -644,12 +646,12 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
RTSR &= RTSR_ALE;
RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
} else if (alarm_enable) {
RTSR &= RTSR_ALE;
RTAR = alarm_time;
dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
} else {
dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
}
......@@ -658,19 +660,18 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
sharpsl_pm.machinfo->postsuspend();
dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
}
static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
{
if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
}
if(sharpsl_off_charge_battery()) {
if (sharpsl_off_charge_battery()) {
dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
......@@ -697,7 +698,7 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
corgi_goto_sleep(alarm_time, alarm_status, state);
while (corgi_enter_suspend(alarm_time,alarm_status,state))
while (corgi_enter_suspend(alarm_time, alarm_status, state))
{}
if (sharpsl_pm.machinfo->earlyresume)
......@@ -732,7 +733,7 @@ static int sharpsl_fatal_check(void)
sharpsl_pm.machinfo->discharge1(1);
/* Check battery : check inserting battery ? */
for (i=0; i<5; i++) {
for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
}
......@@ -812,7 +813,7 @@ static int sharpsl_off_charge_battery(void)
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
while(1) {
while (1) {
/* Check if any wakeup event had occurred */
if (sharpsl_pm.machinfo->charger_wakeup() != 0)
return 0;
......@@ -835,9 +836,9 @@ static int sharpsl_off_charge_battery(void)
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
while(1) {
while (1) {
/* Check if any wakeup event had occurred */
if (sharpsl_pm.machinfo->charger_wakeup() != 0)
if (sharpsl_pm.machinfo->charger_wakeup())
return 0;
/* Check for timeout */
if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
......@@ -864,12 +865,12 @@ static int sharpsl_off_charge_battery(void)
static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
}
static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
}
static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
......@@ -943,8 +944,7 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
}
}
if (sharpsl_pm.machinfo->batfull_irq)
{
if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
......
arch/arm/mach-pxa/spitz_pm.c
View file @ b64b0b76
......@@ -103,7 +103,7 @@ static void spitz_presuspend(void)
PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
PKSR = 0xffffffff; // clear
PKSR = 0xffffffff; /* clear */
/* nRESET_OUT Disable */
PSLR |= PSLR_SL_ROD;
......@@ -149,7 +149,7 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
if (resume_on_alarm && (PEDR & PWER_RTC))
is_resume |= PWER_RTC;
dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
return is_resume;
}
......@@ -160,7 +160,7 @@ static unsigned long spitz_charger_wakeup(void)
unsigned long spitzpm_read_devdata(int type)
{
switch(type) {
switch (type) {
case SHARPSL_STATUS_ACIN:
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7