arm64: dts: sdm845: Add CPU capacity values

Specify the relative CPU capacity of all SDM845 AP cores.

The values were provided by Qualcomm engineers.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Andy Gross <agross@kernel.org>

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -190,6 +190,7 @@ CPU0: cpu@0 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <607>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
@@ -207,6 +208,7 @@ CPU1: cpu@100 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <607>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
@@ -221,6 +223,7 @@ CPU2: cpu@200 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <607>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
@@ -235,6 +238,7 @@ CPU3: cpu@300 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <607>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
@@ -249,6 +253,7 @@ CPU4: cpu@400 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
@@ -263,6 +268,7 @@ CPU5: cpu@500 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
@@ -277,6 +283,7 @@ CPU6: cpu@600 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
@@ -291,6 +298,7 @@ CPU7: cpu@700 {
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;