Merge tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A new driver this cycle is making the bulk of the changes and the
  rx8010 driver has been rework to use the modern APIs.

  Summary:

  Subsystem:
   - new generic DT properties: aux-voltage-chargeable,
     trickle-voltage-millivolt

  New driver:
   - Microcrystal RV-3032

  Drivers:
   - ds1307: use aux-voltage-chargeable
   - r9701, rx8010: modernization of the driver
   - rv3028: fix clock output, trickle resistor values, RAM
     configuration registers"

* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: r9701: set range
  rtc: r9701: convert to devm_rtc_allocate_device
  rtc: r9701: stop setting RWKCNT
  rtc: r9701: remove useless memset
  rtc: r9701: stop setting a default time
  rtc: r9701: remove leftover comment
  rtc: rv3032: Add a driver for Microcrystal RV-3032
  dt-bindings: rtc: rv3032: add RV-3032 bindings
  dt-bindings: rtc: add trickle-voltage-millivolt
  rtc: rv3028: ensure ram configuration registers are saved
  rtc: rv3028: factorize EERD bit handling
  rtc: rv3028: fix trickle resistor values
  rtc: rv3028: fix clock output support
  rtc: mt6397: Remove unused member dev
  rtc: rv8803: simplify the return expression of rv8803_nvram_write
  rtc: meson: simplify the return expression of meson_vrtc_probe
  rtc: rx8010: rename rx8010_init_client() to rx8010_init()
  rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
  rtc: ds1307: consider aux-voltage-chargeable
  rtc: ds1307: store previous charge default per chip
  ...

Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microcrystal,rv3032.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip RV-3032 RTC Device Tree Bindings
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: microcrystal,rv3032
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  trickle-resistor-ohms:
+    enum:
+      - 1000
+      - 2000
+      - 7000
+      - 11000
+
+  trickle-voltage-millivolt:
+    enum:
+      - 1750
+      - 3000
+      - 4400
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "microcrystal,rv3032";
+            reg = <0x51>;
+            status = "okay";
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            trickle-resistor-ohms = <7000>;
+            trickle-voltage-millivolt = <1750>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/rtc/rtc-ds1307.txt

@@ -31,9 +31,16 @@ Optional properties:
 	Selected resistor for trickle charger
 	Possible values are 250, 2000, 4000
 	Should be given if trickle charger should be enabled
-- trickle-diode-disable : ds1339, ds1340 and ds 1388 only
+- aux-voltage-chargeable: ds1339, ds1340, ds1388 and rx8130 only
+	Tells whether the battery/supercap of the RTC (if any) is
+	chargeable or not.
+	Possible values are 0 (not chargeable), 1 (chargeable)
+
+Deprecated properties:
+- trickle-diode-disable : ds1339, ds1340 and ds1388 only
 	Do not use internal trickle charger diode
 	Should be given if internal trickle charger diode should be disabled
+	(superseded by aux-voltage-chargeable)
 
 Example:
 	ds1339: rtc@68 {

Documentation/devicetree/bindings/rtc/rtc.yaml

@@ -17,6 +17,15 @@ properties:
   $nodename:
     pattern: "^rtc(@.*|-[0-9a-f])*$"
 
+  aux-voltage-chargeable:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Tells whether the battery/supercap of the RTC (if any) is
+      chargeable or not:
+      0: not chargeable
+      1: chargeable
+
   quartz-load-femtofarads:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -35,6 +44,7 @@ properties:
     description:
       Do not use internal trickle charger diode. Should be given if
       internal trickle charger diode should be disabled.
+    deprecated: true
 
   trickle-resistor-ohms:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -42,6 +52,12 @@ properties:
       Selected resistor for trickle charger. Should be given
       if trickle charger should be enabled.
 
+  trickle-voltage-millivolt:
+    description:
+      Selected voltage for trickle charger. Should be given
+      if trickle charger should be enabled and the trickle voltage is different
+      from the RTC main power supply.
+
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
     description:

drivers/rtc/Kconfig

@@ -669,6 +669,16 @@ config RTC_DRV_RV3028
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rv3028.
 
+config RTC_DRV_RV3032
+	tristate "Micro Crystal RV3032"
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Micro Crystal
+	  RV3032.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rv3032.
+
 config RTC_DRV_RV8803
 	tristate "Micro Crystal RV8803, Epson RX8900"
 	help

drivers/rtc/Makefile

@@ -141,6 +141,7 @@ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
 obj-$(CONFIG_RTC_DRV_RTD119X)	+= rtc-rtd119x.o
 obj-$(CONFIG_RTC_DRV_RV3028)	+= rtc-rv3028.o
 obj-$(CONFIG_RTC_DRV_RV3029C2)	+= rtc-rv3029c2.o
+obj-$(CONFIG_RTC_DRV_RV3032)	+= rtc-rv3032.o
 obj-$(CONFIG_RTC_DRV_RV8803)	+= rtc-rv8803.o
 obj-$(CONFIG_RTC_DRV_RX4581)	+= rtc-rx4581.o
 obj-$(CONFIG_RTC_DRV_RX6110)	+= rtc-rx6110.o

drivers/rtc/rtc-cmos.c

@@ -1006,6 +1006,7 @@ static int cmos_suspend(struct device *dev)
 			enable_irq_wake(cmos->irq);
 	}
 
+	memset(&cmos->saved_wkalrm, 0, sizeof(struct rtc_wkalrm));
 	cmos_read_alarm(dev, &cmos->saved_wkalrm);
 
 	dev_dbg(dev, "suspend%s, ctrl %02x\n",
@@ -1054,6 +1055,7 @@ static void cmos_check_wkalrm(struct device *dev)
 		return;
 	}
 
+	memset(&current_alarm, 0, sizeof(struct rtc_wkalrm));
 	cmos_read_alarm(dev, &current_alarm);
 	t_current_expires = rtc_tm_to_time64(&current_alarm.time);
 	t_saved_expires = rtc_tm_to_time64(&cmos->saved_wkalrm.time);

drivers/rtc/rtc-ds1307.c

@@ -122,6 +122,9 @@ enum ds_type {
 #define RX8130_REG_FLAG_AF		BIT(3)
 #define RX8130_REG_CONTROL0		0x1e
 #define RX8130_REG_CONTROL0_AIE		BIT(3)
+#define RX8130_REG_CONTROL1		0x1f
+#define RX8130_REG_CONTROL1_INIEN	BIT(4)
+#define RX8130_REG_CONTROL1_CHGEN	BIT(5)
 
 #define MCP794XX_REG_CONTROL		0x07
 #	define MCP794XX_BIT_ALM0_EN	0x10
@@ -153,6 +156,7 @@ enum ds_type {
 #define DS1388_REG_CONTROL		0x0c
 #	define DS1388_BIT_RST		BIT(0)
 #	define DS1388_BIT_WDE		BIT(1)
+#	define DS1388_BIT_nEOSC		BIT(7)
 
 /* negative offset step is -2.034ppm */
 #define M41TXX_NEG_OFFSET_STEP_PPB	2034
@@ -190,6 +194,15 @@ struct chip_desc {
 	u16			trickle_charger_reg;
 	u8			(*do_trickle_setup)(struct ds1307 *, u32,
 						    bool);
+	/* Does the RTC require trickle-resistor-ohms to select the value of
+	 * the resistor between Vcc and Vbackup?
+	 */
+	bool			requires_trickle_resistor;
+	/* Some RTC's batteries and supercaps were charged by default, others
+	 * allow charging but were not configured previously to do so.
+	 * Remember this behavior to stay backwards compatible.
+	 */
+	bool			charge_default;
 };
 
 static const struct chip_desc chips[last_ds_type];
@@ -352,6 +365,10 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
 		regmap_update_bits(ds1307->regmap, DS1340_REG_FLAG,
 				   DS1340_BIT_OSF, 0);
 		break;
+	case ds_1388:
+		regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
+				   DS1388_BIT_OSF, 0);
+		break;
 	case mcp794xx:
 		/*
 		 * these bits were cleared when preparing the date/time
@@ -507,6 +524,8 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
 	u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
 		DS1307_TRICKLE_CHARGER_NO_DIODE;
 
+	setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
+
 	switch (ohms) {
 	case 250:
 		setup |= DS1307_TRICKLE_CHARGER_250_OHM;
@@ -525,6 +544,16 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
 	return setup;
 }
 
+static u8 do_trickle_setup_rx8130(struct ds1307 *ds1307, u32 ohms, bool diode)
+{
+	/* make sure that the backup battery is enabled */
+	u8 setup = RX8130_REG_CONTROL1_INIEN;
+	if (diode)
+		setup |= RX8130_REG_CONTROL1_CHGEN;
+
+	return setup;
+}
+
 static irqreturn_t rx8130_irq(int irq, void *dev_id)
 {
 	struct ds1307           *ds1307 = dev_id;
@@ -979,6 +1008,8 @@ static const struct chip_desc chips[last_ds_type] = {
 		.bbsqi_bit	= DS1339_BIT_BBSQI,
 		.trickle_charger_reg = 0x10,
 		.do_trickle_setup = &do_trickle_setup_ds1339,
+		.requires_trickle_resistor = true,
+		.charge_default = true,
 	},
 	[ds_1340] = {
 		.century_reg	= DS1307_REG_HOUR,
@@ -986,6 +1017,8 @@ static const struct chip_desc chips[last_ds_type] = {
 		.century_bit	= DS1340_BIT_CENTURY,
 		.do_trickle_setup = &do_trickle_setup_ds1339,
 		.trickle_charger_reg = 0x08,
+		.requires_trickle_resistor = true,
+		.charge_default = true,
 	},
 	[ds_1341] = {
 		.century_reg	= DS1307_REG_MONTH,
@@ -1009,6 +1042,8 @@ static const struct chip_desc chips[last_ds_type] = {
 		.offset		= 0x10,
 		.irq_handler = rx8130_irq,
 		.rtc_ops = &rx8130_rtc_ops,
+		.trickle_charger_reg = RX8130_REG_CONTROL1,
+		.do_trickle_setup = &do_trickle_setup_rx8130,
 	},
 	[m41t0] = {
 		.rtc_ops	= &m41txx_rtc_ops,
@@ -1293,18 +1328,37 @@ static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
 static u8 ds1307_trickle_init(struct ds1307 *ds1307,
 			      const struct chip_desc *chip)
 {
-	u32 ohms;
-	bool diode = true;
+	u32 ohms, chargeable;
+	bool diode = chip->charge_default;
 
 	if (!chip->do_trickle_setup)
 		return 0;
 
 	if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
-				     &ohms))
+				     &ohms) && chip->requires_trickle_resistor)
 		return 0;
 
-	if (device_property_read_bool(ds1307->dev, "trickle-diode-disable"))
+	/* aux-voltage-chargeable takes precedence over the deprecated
+	 * trickle-diode-disable
+	 */
+	if (!device_property_read_u32(ds1307->dev, "aux-voltage-chargeable",
+				     &chargeable)) {
+		switch (chargeable) {
+		case 0:
+			diode = false;
+			break;
+		case 1:
+			diode = true;
+			break;
+		default:
+			dev_warn(ds1307->dev,
+				 "unsupported aux-voltage-chargeable value\n");
+			break;
+		}
+	} else if (device_property_read_bool(ds1307->dev,
+					     "trickle-diode-disable")) {
 		diode = false;
+	}
 
 	return chip->do_trickle_setup(ds1307, ohms, diode);
 }
@@ -1758,7 +1812,6 @@ static int ds1307_probe(struct i2c_client *client,
 		trickle_charger_setup = pdata->trickle_charger_setup;
 
 	if (trickle_charger_setup && chip->trickle_charger_reg) {
-		trickle_charger_setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
 		dev_dbg(ds1307->dev,
 			"writing trickle charger info 0x%x to 0x%x\n",
 			trickle_charger_setup, chip->trickle_charger_reg);
@@ -1881,6 +1934,19 @@ static int ds1307_probe(struct i2c_client *client,
 				     DS1307_REG_HOUR << 4 | 0x08, hour);
 		}
 		break;
+	case ds_1388:
+		err = regmap_read(ds1307->regmap, DS1388_REG_CONTROL, &tmp);
+		if (err) {
+			dev_dbg(ds1307->dev, "read error %d\n", err);
+			goto exit;
+		}
+
+		/* oscillator off?  turn it on, so clock can tick. */
+		if (tmp & DS1388_BIT_nEOSC) {
+			tmp &= ~DS1388_BIT_nEOSC;
+			regmap_write(ds1307->regmap, DS1388_REG_CONTROL, tmp);
+		}
+		break;
 	default:
 		break;
 	}

drivers/rtc/rtc-ds1685.c

@@ -193,12 +193,12 @@ ds1685_rtc_begin_data_access(struct ds1685_priv *rtc)
 	rtc->write(rtc, RTC_CTRL_B,
 		   (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
 
+	/* Switch to Bank 1 */
+	ds1685_rtc_switch_to_bank1(rtc);
+
 	/* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
 	while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
 		cpu_relax();
-
-	/* Switch to Bank 1 */
-	ds1685_rtc_switch_to_bank1(rtc);
 }
 
 /**
@@ -213,7 +213,7 @@ static inline void
 ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
 {
 	/* Switch back to Bank 0 */
-	ds1685_rtc_switch_to_bank1(rtc);
+	ds1685_rtc_switch_to_bank0(rtc);
 
 	/* Clear the SET bit in Ctrl B */
 	rtc->write(rtc, RTC_CTRL_B,

drivers/rtc/rtc-fsl-ftm-alarm.c

@@ -3,7 +3,7 @@
  * Freescale FlexTimer Module (FTM) alarm device driver.
  *
  * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  *
  */
 
@@ -312,7 +312,7 @@ static const struct of_device_id ftm_rtc_match[] = {
 };
 
 static const struct acpi_device_id ftm_imx_acpi_ids[] = {
-	{"NXP0011",},
+	{"NXP0014",},
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, ftm_imx_acpi_ids);

drivers/rtc/rtc-meson-vrtc.c

@@ -65,7 +65,6 @@ static const struct rtc_class_ops meson_vrtc_ops = {
 static int meson_vrtc_probe(struct platform_device *pdev)
 {
 	struct meson_vrtc_data *vrtc;
-	int ret;
 
 	vrtc = devm_kzalloc(&pdev->dev, sizeof(*vrtc), GFP_KERNEL);
 	if (!vrtc)
@@ -84,11 +83,7 @@ static int meson_vrtc_probe(struct platform_device *pdev)
 		return PTR_ERR(vrtc->rtc);
 
 	vrtc->rtc->ops = &meson_vrtc_ops;
-	ret = rtc_register_device(vrtc->rtc);
-	if (ret)
-		return ret;
-
-	return 0;
+	return rtc_register_device(vrtc->rtc);
 }
 
 static int __maybe_unused meson_vrtc_suspend(struct device *dev)

drivers/rtc/rtc-mt6397.c

@@ -31,7 +31,8 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 					MTK_RTC_POLL_DELAY_US,
 					MTK_RTC_POLL_TIMEOUT);
 	if (ret < 0)
-		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
+		dev_err(rtc->rtc_dev->dev.parent,
+			"failed to write WRTGR: %d\n", ret);
 
 	return ret;
 }

drivers/rtc/rtc-pcf2127.c

@@ -559,7 +559,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 	pcf2127->rtc->set_start_time = true; /* Sets actual start to 1970 */
 	pcf2127->rtc->uie_unsupported = 1;
 
-	if (alarm_irq >= 0) {
+	if (alarm_irq > 0) {
 		ret = devm_request_threaded_irq(dev, alarm_irq, NULL,
 						pcf2127_rtc_irq,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
@@ -570,7 +570,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 		}
 	}
 
-	if (alarm_irq >= 0 || device_property_read_bool(dev, "wakeup-source")) {
+	if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) {
 		device_init_wakeup(dev, true);
 		pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops;
 	}

drivers/rtc/rtc-r9701.c

@@ -75,8 +75,6 @@ static int r9701_get_datetime(struct device *dev, struct rtc_time *dt)
 	if (ret)
 		return ret;
 
-	memset(dt, 0, sizeof(*dt));
-
 	dt->tm_sec = bcd2bin(buf[0]); /* RSECCNT */
 	dt->tm_min = bcd2bin(buf[1]); /* RMINCNT */
 	dt->tm_hour = bcd2bin(buf[2]); /* RHRCNT */
@@ -85,20 +83,12 @@ static int r9701_get_datetime(struct device *dev, struct rtc_time *dt)
 	dt->tm_mon = bcd2bin(buf[4]) - 1; /* RMONCNT */
 	dt->tm_year = bcd2bin(buf[5]) + 100; /* RYRCNT */
 
-	/* the rtc device may contain illegal values on power up
-	 * according to the data sheet. make sure they are valid.
-	 */
-
 	return 0;
 }
 
 static int r9701_set_datetime(struct device *dev, struct rtc_time *dt)
 {
-	int ret, year;
-
-	year = dt->tm_year + 1900;
-	if (year >= 2100 || year < 2000)
-		return -EINVAL;
+	int ret;
 
 	ret = write_reg(dev, RHRCNT, bin2bcd(dt->tm_hour));
 	ret = ret ? ret : write_reg(dev, RMINCNT, bin2bcd(dt->tm_min));
@@ -106,7 +96,6 @@ static int r9701_set_datetime(struct device *dev, struct rtc_time *dt)
 	ret = ret ? ret : write_reg(dev, RDAYCNT, bin2bcd(dt->tm_mday));
 	ret = ret ? ret : write_reg(dev, RMONCNT, bin2bcd(dt->tm_mon + 1));
 	ret = ret ? ret : write_reg(dev, RYRCNT, bin2bcd(dt->tm_year - 100));
-	ret = ret ? ret : write_reg(dev, RWKCNT, 1 << dt->tm_wday);
 
 	return ret;
 }
@@ -119,7 +108,6 @@ static const struct rtc_class_ops r9701_rtc_ops = {
 static int r9701_probe(struct spi_device *spi)
 {
 	struct rtc_device *rtc;
-	struct rtc_time dt;
 	unsigned char tmp;
 	int res;
 
@@ -130,35 +118,16 @@ static int r9701_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	/*
-	 * The device seems to be present. Now check if the registers
-	 * contain invalid values. If so, try to write a default date:
-	 * 2000/1/1 00:00:00
-	 */
-	if (r9701_get_datetime(&spi->dev, &dt)) {
-		dev_info(&spi->dev, "trying to repair invalid date/time\n");
-		dt.tm_sec  = 0;
-		dt.tm_min  = 0;
-		dt.tm_hour = 0;
-		dt.tm_mday = 1;
-		dt.tm_mon  = 0;
-		dt.tm_year = 100;
-
-		if (r9701_set_datetime(&spi->dev, &dt) ||
-				r9701_get_datetime(&spi->dev, &dt)) {
-			dev_err(&spi->dev, "cannot repair RTC register\n");
-			return -ENODEV;
-		}
-	}
-
-	rtc = devm_rtc_device_register(&spi->dev, "r9701",
-				&r9701_rtc_ops, THIS_MODULE);
+	rtc = devm_rtc_allocate_device(&spi->dev);
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
 
 	spi_set_drvdata(spi, rtc);
+	rtc->ops = &r9701_rtc_ops;
+	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rtc->range_max = RTC_TIMESTAMP_END_2099;
 
-	return 0;
+	return rtc_register_device(rtc);
 }
 
 static struct spi_driver r9701_driver = {

drivers/rtc/rtc-rs5c313.c

@@ -366,15 +366,15 @@ static const struct rtc_class_ops rs5c313_rtc_ops = {
 
 static int rs5c313_rtc_probe(struct platform_device *pdev)
 {
-	struct rtc_device *rtc = devm_rtc_device_register(&pdev->dev, "rs5c313",
-				&rs5c313_rtc_ops, THIS_MODULE);
+	struct rtc_device *rtc;
 
-	if (IS_ERR(rtc))
-		return PTR_ERR(rtc);
+	rs5c313_init_port();
+	rs5c313_check_xstp_bit();
 
-	platform_set_drvdata(pdev, rtc);
+	rtc = devm_rtc_device_register(&pdev->dev, "rs5c313", &rs5c313_rtc_ops,
+				       THIS_MODULE);
 
-	return 0;
+	return PTR_ERR_OR_ZERO(rtc);
 }
 
 static struct platform_driver rs5c313_rtc_platform_driver = {
@@ -384,27 +384,7 @@ static struct platform_driver rs5c313_rtc_platform_driver = {
 	.probe	= rs5c313_rtc_probe,
 };
 
-static int __init rs5c313_rtc_init(void)
-{
-	int err;
-
-	err = platform_driver_register(&rs5c313_rtc_platform_driver);
-	if (err)
-		return err;
-
-	rs5c313_init_port();
-	rs5c313_check_xstp_bit();
-
-	return 0;
-}
-
-static void __exit rs5c313_rtc_exit(void)
-{
-	platform_driver_unregister(&rs5c313_rtc_platform_driver);
-}
-
-module_init(rs5c313_rtc_init);
-module_exit(rs5c313_rtc_exit);
+module_platform_driver(rs5c313_rtc_platform_driver);
 
 MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
 MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver");

drivers/rtc/rtc-rv3028.c

@@ -71,6 +71,7 @@
 
 #define RV3028_EVT_CTRL_TSR		BIT(2)
 
+#define RV3028_EEPROM_CMD_UPDATE	0x11
 #define RV3028_EEPROM_CMD_WRITE		0x21
 #define RV3028_EEPROM_CMD_READ		0x22
 
@@ -95,7 +96,7 @@ struct rv3028_data {
 #endif
 };
 
-static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000};
+static u16 rv3028_trickle_resistors[] = {3000, 5000, 9000, 15000};
 
 static ssize_t timestamp0_store(struct device *dev,
 				struct device_attribute *attr,
@@ -171,6 +172,88 @@ static const struct attribute_group rv3028_attr_group = {
 	.attrs	= rv3028_attrs,
 };
 
+static int rv3028_exit_eerd(struct rv3028_data *rv3028, u32 eerd)
+{
+	if (eerd)
+		return 0;
+
+	return regmap_update_bits(rv3028->regmap, RV3028_CTRL1, RV3028_CTRL1_EERD, 0);
+}
+
+static int rv3028_enter_eerd(struct rv3028_data *rv3028, u32 *eerd)
+{
+	u32 ctrl1, status;
+	int ret;
+
+	ret = regmap_read(rv3028->regmap, RV3028_CTRL1, &ctrl1);
+	if (ret)
+		return ret;
+
+	*eerd = ctrl1 & RV3028_CTRL1_EERD;
+	if (*eerd)
+		return 0;
+
+	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
+				 RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
+				       !(status & RV3028_STATUS_EEBUSY),
+				       RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
+	if (ret) {
+		rv3028_exit_eerd(rv3028, *eerd);
+
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rv3028_update_eeprom(struct rv3028_data *rv3028, u32 eerd)
+{
+	u32 status;
+	int ret;
+
+	ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
+	if (ret)
+		goto exit_eerd;
+
+	ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, RV3028_EEPROM_CMD_UPDATE);
+	if (ret)
+		goto exit_eerd;
+
+	usleep_range(63000, RV3028_EEBUSY_TIMEOUT);
+
+	ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
+				       !(status & RV3028_STATUS_EEBUSY),
+				       RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
+
+exit_eerd:
+	rv3028_exit_eerd(rv3028, eerd);
+
+	return ret;
+}
+
+static int rv3028_update_cfg(struct rv3028_data *rv3028, unsigned int reg,
+			     unsigned int mask, unsigned int val)
+{
+	u32 eerd;
+	int ret;
+
+	ret = rv3028_enter_eerd(rv3028, &eerd);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(rv3028->regmap, reg, mask, val);
+	if (ret) {
+		rv3028_exit_eerd(rv3028, eerd);
+		return ret;
+	}
+
+	return rv3028_update_eeprom(rv3028, eerd);
+}
+
 static irqreturn_t rv3028_handle_irq(int irq, void *dev_id)
 {
 	struct rv3028_data *rv3028 = dev_id;
@@ -404,17 +487,32 @@ static int rv3028_read_offset(struct device *dev, long *offset)
 static int rv3028_set_offset(struct device *dev, long offset)
 {
 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
+	u32 eerd;
 	int ret;
 
 	offset = clamp(offset, -244141L, 243187L) * 1000;
 	offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
 
+	ret = rv3028_enter_eerd(rv3028, &eerd);
+	if (ret)
+		return ret;
+
 	ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1);
 	if (ret < 0)
-		return ret;
+		goto exit_eerd;
+
+	ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
+				 offset << 7);
+	if (ret < 0)
+		goto exit_eerd;
+
+	return rv3028_update_eeprom(rv3028, eerd);
+
+exit_eerd:
+	rv3028_exit_eerd(rv3028, eerd);
+
+	return ret;
 
-	return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
-				  offset << 7);
 }
 
 static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
@@ -451,49 +549,36 @@ static int rv3028_nvram_read(void *priv, unsigned int offset, void *val,
 static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
 			       size_t bytes)
 {
-	u32 status, ctrl1;
-	int i, ret, err;
+	struct rv3028_data *rv3028 = priv;
+	u32 status, eerd;
+	int i, ret;
 	u8 *buf = val;
 
-	ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
+	ret = rv3028_enter_eerd(rv3028, &eerd);
 	if (ret)
 		return ret;
 
-	if (!(ctrl1 & RV3028_CTRL1_EERD)) {
-		ret = regmap_update_bits(priv, RV3028_CTRL1,
-					 RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
-		if (ret)
-			return ret;
-
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
-					       !(status & RV3028_STATUS_EEBUSY),
-					       RV3028_EEBUSY_POLL,
-					       RV3028_EEBUSY_TIMEOUT);
-		if (ret)
-			goto restore_eerd;
-	}
-
 	for (i = 0; i < bytes; i++) {
-		ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_DATA, buf[i]);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD,
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
 				   RV3028_EEPROM_CMD_WRITE);
 		if (ret)
 			goto restore_eerd;
 
 		usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
 
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+		ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
 					       !(status & RV3028_STATUS_EEBUSY),
 					       RV3028_EEBUSY_POLL,
 					       RV3028_EEBUSY_TIMEOUT);
@@ -502,13 +587,7 @@ static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
 	}
 
 restore_eerd:
-	if (!(ctrl1 & RV3028_CTRL1_EERD))
-	{
-		err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
-					 0);
-		if (err && !ret)
-			ret = err;
-	}
+	rv3028_exit_eerd(rv3028, eerd);
 
 	return ret;
 }
@@ -516,63 +595,44 @@ static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
 static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val,
 			      size_t bytes)
 {
-	u32 status, ctrl1, data;
-	int i, ret, err;
+	struct rv3028_data *rv3028 = priv;
+	u32 status, eerd, data;
+	int i, ret;
 	u8 *buf = val;
 
-	ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
+	ret = rv3028_enter_eerd(rv3028, &eerd);
 	if (ret)
 		return ret;
 
-	if (!(ctrl1 & RV3028_CTRL1_EERD)) {
-		ret = regmap_update_bits(priv, RV3028_CTRL1,
-					 RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
-		if (ret)
-			return ret;
-
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
-					       !(status & RV3028_STATUS_EEBUSY),
-					       RV3028_EEBUSY_POLL,
-					       RV3028_EEBUSY_TIMEOUT);
-		if (ret)
-			goto restore_eerd;
-	}
-
 	for (i = 0; i < bytes; i++) {
-		ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_write(priv, RV3028_EEPROM_CMD,
+		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
 				   RV3028_EEPROM_CMD_READ);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
+		ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
 					       !(status & RV3028_STATUS_EEBUSY),
 					       RV3028_EEBUSY_POLL,
 					       RV3028_EEBUSY_TIMEOUT);
 		if (ret)
 			goto restore_eerd;
 
-		ret = regmap_read(priv, RV3028_EEPROM_DATA, &data);
+		ret = regmap_read(rv3028->regmap, RV3028_EEPROM_DATA, &data);
 		if (ret)
 			goto restore_eerd;
 		buf[i] = data;
 	}
 
 restore_eerd:
-	if (!(ctrl1 & RV3028_CTRL1_EERD))
-	{
-		err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
-					 0);
-		if (err && !ret)
-			ret = err;
-	}
+	rv3028_exit_eerd(rv3028, eerd);
 
 	return ret;
 }
@@ -619,24 +679,23 @@ static int rv3028_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 				  unsigned long parent_rate)
 {
 	int i, ret;
+	u32 enabled;
 	struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
 
+	ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &enabled);
+	if (ret < 0)
+		return ret;
+
 	ret = regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0);
 	if (ret < 0)
 		return ret;
 
-	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) {
-		if (clkout_rates[i] == rate) {
-			ret = regmap_update_bits(rv3028->regmap,
-						 RV3028_CLKOUT,
-						 RV3028_CLKOUT_FD_MASK, i);
-			if (ret < 0)
-				return ret;
+	enabled &= RV3028_CLKOUT_CLKOE;
 
-			return regmap_write(rv3028->regmap, RV3028_CLKOUT,
-				RV3028_CLKOUT_CLKSY | RV3028_CLKOUT_CLKOE);
-		}
-	}
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate)
+			return rv3028_update_cfg(rv3028, RV3028_CLKOUT, 0xff,
+						 RV3028_CLKOUT_CLKSY | enabled | i);
 
 	return -EINVAL;
 }
@@ -811,10 +870,8 @@ static int rv3028_probe(struct i2c_client *client)
 				break;
 
 		if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
-			ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
-						 RV3028_BACKUP_TCE |
-						 RV3028_BACKUP_TCR_MASK,
-						 RV3028_BACKUP_TCE | i);
+			ret = rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_TCE |
+						 RV3028_BACKUP_TCR_MASK, RV3028_BACKUP_TCE | i);
 			if (ret)
 				return ret;
 		} else {
@@ -835,7 +892,7 @@ static int rv3028_probe(struct i2c_client *client)
 
 	nvmem_cfg.priv = rv3028->regmap;
 	rtc_nvmem_register(rv3028->rtc, &nvmem_cfg);
-	eeprom_cfg.priv = rv3028->regmap;
+	eeprom_cfg.priv = rv3028;
 	rtc_nvmem_register(rv3028->rtc, &eeprom_cfg);
 
 	rv3028->rtc->max_user_freq = 1;

drivers/rtc/rtc-rv3032.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RTC driver for the Micro Crystal RV3032
+ *
+ * Copyright (C) 2020 Micro Crystal SA
+ *
+ * Alexandre Belloni <alexandre.belloni@bootlin.com>
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/bcd.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define RV3032_SEC			0x01
+#define RV3032_MIN			0x02
+#define RV3032_HOUR			0x03
+#define RV3032_WDAY			0x04
+#define RV3032_DAY			0x05
+#define RV3032_MONTH			0x06
+#define RV3032_YEAR			0x07
+#define RV3032_ALARM_MIN		0x08
+#define RV3032_ALARM_HOUR		0x09
+#define RV3032_ALARM_DAY		0x0A
+#define RV3032_STATUS			0x0D
+#define RV3032_TLSB			0x0E
+#define RV3032_TMSB			0x0F
+#define RV3032_CTRL1			0x10
+#define RV3032_CTRL2			0x11
+#define RV3032_CTRL3			0x12
+#define RV3032_TS_CTRL			0x13
+#define RV3032_CLK_IRQ			0x14
+#define RV3032_EEPROM_ADDR		0x3D
+#define RV3032_EEPROM_DATA		0x3E
+#define RV3032_EEPROM_CMD		0x3F
+#define RV3032_RAM1			0x40
+#define RV3032_PMU			0xC0
+#define RV3032_OFFSET			0xC1
+#define RV3032_CLKOUT1			0xC2
+#define RV3032_CLKOUT2			0xC3
+#define RV3032_TREF0			0xC4
+#define RV3032_TREF1			0xC5
+
+#define RV3032_STATUS_VLF		BIT(0)
+#define RV3032_STATUS_PORF		BIT(1)
+#define RV3032_STATUS_EVF		BIT(2)
+#define RV3032_STATUS_AF		BIT(3)
+#define RV3032_STATUS_TF		BIT(4)
+#define RV3032_STATUS_UF		BIT(5)
+#define RV3032_STATUS_TLF		BIT(6)
+#define RV3032_STATUS_THF		BIT(7)
+
+#define RV3032_TLSB_CLKF		BIT(1)
+#define RV3032_TLSB_EEBUSY		BIT(2)
+#define RV3032_TLSB_TEMP		GENMASK(7, 4)
+
+#define RV3032_CLKOUT2_HFD_MSK		GENMASK(4, 0)
+#define RV3032_CLKOUT2_FD_MSK		GENMASK(6, 5)
+#define RV3032_CLKOUT2_OS		BIT(7)
+
+#define RV3032_CTRL1_EERD		BIT(3)
+#define RV3032_CTRL1_WADA		BIT(5)
+
+#define RV3032_CTRL2_STOP		BIT(0)
+#define RV3032_CTRL2_EIE		BIT(2)
+#define RV3032_CTRL2_AIE		BIT(3)
+#define RV3032_CTRL2_TIE		BIT(4)
+#define RV3032_CTRL2_UIE		BIT(5)
+#define RV3032_CTRL2_CLKIE		BIT(6)
+#define RV3032_CTRL2_TSE		BIT(7)
+
+#define RV3032_PMU_TCM			GENMASK(1, 0)
+#define RV3032_PMU_TCR			GENMASK(3, 2)
+#define RV3032_PMU_BSM			GENMASK(5, 4)
+#define RV3032_PMU_NCLKE		BIT(6)
+
+#define RV3032_PMU_BSM_DSM		1
+#define RV3032_PMU_BSM_LSM		2
+
+#define RV3032_OFFSET_MSK		GENMASK(5, 0)
+
+#define RV3032_EVT_CTRL_TSR		BIT(2)
+
+#define RV3032_EEPROM_CMD_UPDATE	0x11
+#define RV3032_EEPROM_CMD_WRITE		0x21
+#define RV3032_EEPROM_CMD_READ		0x22
+
+#define RV3032_EEPROM_USER		0xCB
+
+#define RV3032_EEBUSY_POLL		10000
+#define RV3032_EEBUSY_TIMEOUT		100000
+
+#define OFFSET_STEP_PPT			238419
+
+struct rv3032_data {
+	struct regmap *regmap;
+	struct rtc_device *rtc;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw clkout_hw;
+#endif
+};
+
+static u16 rv3032_trickle_resistors[] = {1000, 2000, 7000, 11000};
+static u16 rv3032_trickle_voltages[] = {0, 1750, 3000, 4400};
+
+static int rv3032_exit_eerd(struct rv3032_data *rv3032, u32 eerd)
+{
+	if (eerd)
+		return 0;
+
+	return regmap_update_bits(rv3032->regmap, RV3032_CTRL1, RV3032_CTRL1_EERD, 0);
+}
+
+static int rv3032_enter_eerd(struct rv3032_data *rv3032, u32 *eerd)
+{
+	u32 ctrl1, status;
+	int ret;
+
+	ret = regmap_read(rv3032->regmap, RV3032_CTRL1, &ctrl1);
+	if (ret)
+		return ret;
+
+	*eerd = ctrl1 & RV3032_CTRL1_EERD;
+	if (*eerd)
+		return 0;
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL1,
+				 RV3032_CTRL1_EERD, RV3032_CTRL1_EERD);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
+				       !(status & RV3032_TLSB_EEBUSY),
+				       RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
+	if (ret) {
+		rv3032_exit_eerd(rv3032, *eerd);
+
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rv3032_update_cfg(struct rv3032_data *rv3032, unsigned int reg,
+			     unsigned int mask, unsigned int val)
+{
+	u32 status, eerd;
+	int ret;
+
+	ret = rv3032_enter_eerd(rv3032, &eerd);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(rv3032->regmap, reg, mask, val);
+	if (ret)
+		goto exit_eerd;
+
+	ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, RV3032_EEPROM_CMD_UPDATE);
+	if (ret)
+		goto exit_eerd;
+
+	usleep_range(46000, RV3032_EEBUSY_TIMEOUT);
+
+	ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
+				       !(status & RV3032_TLSB_EEBUSY),
+				       RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
+
+exit_eerd:
+	rv3032_exit_eerd(rv3032, eerd);
+
+	return ret;
+}
+
+static irqreturn_t rv3032_handle_irq(int irq, void *dev_id)
+{
+	struct rv3032_data *rv3032 = dev_id;
+	unsigned long events = 0;
+	u32 status = 0, ctrl = 0;
+
+	if (regmap_read(rv3032->regmap, RV3032_STATUS, &status) < 0 ||
+	    status == 0) {
+		return IRQ_NONE;
+	}
+
+	if (status & RV3032_STATUS_TF) {
+		status |= RV3032_STATUS_TF;
+		ctrl |= RV3032_CTRL2_TIE;
+		events |= RTC_PF;
+	}
+
+	if (status & RV3032_STATUS_AF) {
+		status |= RV3032_STATUS_AF;
+		ctrl |= RV3032_CTRL2_AIE;
+		events |= RTC_AF;
+	}
+
+	if (status & RV3032_STATUS_UF) {
+		status |= RV3032_STATUS_UF;
+		ctrl |= RV3032_CTRL2_UIE;
+		events |= RTC_UF;
+	}
+
+	if (events) {
+		rtc_update_irq(rv3032->rtc, 1, events);
+		regmap_update_bits(rv3032->regmap, RV3032_STATUS, status, 0);
+		regmap_update_bits(rv3032->regmap, RV3032_CTRL2, ctrl, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int rv3032_get_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	u8 date[7];
+	int ret, status;
+
+	ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	if (status & (RV3032_STATUS_PORF | RV3032_STATUS_VLF))
+		return -EINVAL;
+
+	ret = regmap_bulk_read(rv3032->regmap, RV3032_SEC, date, sizeof(date));
+	if (ret)
+		return ret;
+
+	tm->tm_sec  = bcd2bin(date[0] & 0x7f);
+	tm->tm_min  = bcd2bin(date[1] & 0x7f);
+	tm->tm_hour = bcd2bin(date[2] & 0x3f);
+	tm->tm_wday = date[3] & 0x7;
+	tm->tm_mday = bcd2bin(date[4] & 0x3f);
+	tm->tm_mon  = bcd2bin(date[5] & 0x1f) - 1;
+	tm->tm_year = bcd2bin(date[6]) + 100;
+
+	return 0;
+}
+
+static int rv3032_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	u8 date[7];
+	int ret;
+
+	date[0] = bin2bcd(tm->tm_sec);
+	date[1] = bin2bcd(tm->tm_min);
+	date[2] = bin2bcd(tm->tm_hour);
+	date[3] = tm->tm_wday;
+	date[4] = bin2bcd(tm->tm_mday);
+	date[5] = bin2bcd(tm->tm_mon + 1);
+	date[6] = bin2bcd(tm->tm_year - 100);
+
+	ret = regmap_bulk_write(rv3032->regmap, RV3032_SEC, date,
+				sizeof(date));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS,
+				 RV3032_STATUS_PORF | RV3032_STATUS_VLF, 0);
+
+	return ret;
+}
+
+static int rv3032_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	u8 alarmvals[3];
+	int status, ctrl, ret;
+
+	ret = regmap_bulk_read(rv3032->regmap, RV3032_ALARM_MIN, alarmvals,
+			       sizeof(alarmvals));
+	if (ret)
+		return ret;
+
+	ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(rv3032->regmap, RV3032_CTRL2, &ctrl);
+	if (ret < 0)
+		return ret;
+
+	alrm->time.tm_sec  = 0;
+	alrm->time.tm_min  = bcd2bin(alarmvals[0] & 0x7f);
+	alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
+	alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
+
+	alrm->enabled = !!(ctrl & RV3032_CTRL2_AIE);
+	alrm->pending = (status & RV3032_STATUS_AF) && alrm->enabled;
+
+	return 0;
+}
+
+static int rv3032_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	u8 alarmvals[3];
+	u8 ctrl = 0;
+	int ret;
+
+	/* The alarm has no seconds, round up to nearest minute */
+	if (alrm->time.tm_sec) {
+		time64_t alarm_time = rtc_tm_to_time64(&alrm->time);
+
+		alarm_time += 60 - alrm->time.tm_sec;
+		rtc_time64_to_tm(alarm_time, &alrm->time);
+	}
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2,
+				 RV3032_CTRL2_AIE | RV3032_CTRL2_UIE, 0);
+	if (ret)
+		return ret;
+
+	alarmvals[0] = bin2bcd(alrm->time.tm_min);
+	alarmvals[1] = bin2bcd(alrm->time.tm_hour);
+	alarmvals[2] = bin2bcd(alrm->time.tm_mday);
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS,
+				 RV3032_STATUS_AF, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_write(rv3032->regmap, RV3032_ALARM_MIN, alarmvals,
+				sizeof(alarmvals));
+	if (ret)
+		return ret;
+
+	if (alrm->enabled) {
+		if (rv3032->rtc->uie_rtctimer.enabled)
+			ctrl |= RV3032_CTRL2_UIE;
+		if (rv3032->rtc->aie_timer.enabled)
+			ctrl |= RV3032_CTRL2_AIE;
+	}
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2,
+				 RV3032_CTRL2_UIE | RV3032_CTRL2_AIE, ctrl);
+
+	return ret;
+}
+
+static int rv3032_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	int ctrl = 0, ret;
+
+	if (enabled) {
+		if (rv3032->rtc->uie_rtctimer.enabled)
+			ctrl |= RV3032_CTRL2_UIE;
+		if (rv3032->rtc->aie_timer.enabled)
+			ctrl |= RV3032_CTRL2_AIE;
+	}
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS,
+				 RV3032_STATUS_AF | RV3032_STATUS_UF, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2,
+				 RV3032_CTRL2_UIE | RV3032_CTRL2_AIE, ctrl);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rv3032_read_offset(struct device *dev, long *offset)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	int ret, value, steps;
+
+	ret = regmap_read(rv3032->regmap, RV3032_OFFSET, &value);
+	if (ret < 0)
+		return ret;
+
+	steps = sign_extend32(FIELD_GET(RV3032_OFFSET_MSK, value), 5);
+
+	*offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000);
+
+	return 0;
+}
+
+static int rv3032_set_offset(struct device *dev, long offset)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+
+	offset = clamp(offset, -7629L, 7391L) * 1000;
+	offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
+
+	return rv3032_update_cfg(rv3032, RV3032_OFFSET, RV3032_OFFSET_MSK,
+				 FIELD_PREP(RV3032_OFFSET_MSK, offset));
+}
+
+static int rv3032_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	int status, val = 0, ret = 0;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
+		if (ret < 0)
+			return ret;
+
+		if (status & (RV3032_STATUS_PORF | RV3032_STATUS_VLF))
+			val = RTC_VL_DATA_INVALID;
+		return put_user(val, (unsigned int __user *)arg);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static int rv3032_nvram_write(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+	return regmap_bulk_write(priv, RV3032_RAM1 + offset, val, bytes);
+}
+
+static int rv3032_nvram_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+	return regmap_bulk_read(priv, RV3032_RAM1 + offset, val, bytes);
+}
+
+static int rv3032_eeprom_write(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+	struct rv3032_data *rv3032 = priv;
+	u32 status, eerd;
+	int i, ret;
+	u8 *buf = val;
+
+	ret = rv3032_enter_eerd(rv3032, &eerd);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < bytes; i++) {
+		ret = regmap_write(rv3032->regmap, RV3032_EEPROM_ADDR,
+				   RV3032_EEPROM_USER + offset + i);
+		if (ret)
+			goto exit_eerd;
+
+		ret = regmap_write(rv3032->regmap, RV3032_EEPROM_DATA, buf[i]);
+		if (ret)
+			goto exit_eerd;
+
+		ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD,
+				   RV3032_EEPROM_CMD_WRITE);
+		if (ret)
+			goto exit_eerd;
+
+		usleep_range(RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
+
+		ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
+					       !(status & RV3032_TLSB_EEBUSY),
+					       RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
+		if (ret)
+			goto exit_eerd;
+	}
+
+exit_eerd:
+	rv3032_exit_eerd(rv3032, eerd);
+
+	return ret;
+}
+
+static int rv3032_eeprom_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+	struct rv3032_data *rv3032 = priv;
+	u32 status, eerd, data;
+	int i, ret;
+	u8 *buf = val;
+
+	ret = rv3032_enter_eerd(rv3032, &eerd);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < bytes; i++) {
+		ret = regmap_write(rv3032->regmap, RV3032_EEPROM_ADDR,
+				   RV3032_EEPROM_USER + offset + i);
+		if (ret)
+			goto exit_eerd;
+
+		ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD,
+				   RV3032_EEPROM_CMD_READ);
+		if (ret)
+			goto exit_eerd;
+
+		ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
+					       !(status & RV3032_TLSB_EEBUSY),
+					       RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
+		if (ret)
+			goto exit_eerd;
+
+		ret = regmap_read(rv3032->regmap, RV3032_EEPROM_DATA, &data);
+		if (ret)
+			goto exit_eerd;
+		buf[i] = data;
+	}
+
+exit_eerd:
+	rv3032_exit_eerd(rv3032, eerd);
+
+	return ret;
+}
+
+static int rv3032_trickle_charger_setup(struct device *dev, struct rv3032_data *rv3032)
+{
+	u32 val, ohms, voltage;
+	int i;
+
+	val = FIELD_PREP(RV3032_PMU_TCM, 1) | FIELD_PREP(RV3032_PMU_BSM, RV3032_PMU_BSM_DSM);
+	if (!device_property_read_u32(dev, "trickle-voltage-millivolt", &voltage)) {
+		for (i = 0; i < ARRAY_SIZE(rv3032_trickle_voltages); i++)
+			if (voltage == rv3032_trickle_voltages[i])
+				break;
+		if (i < ARRAY_SIZE(rv3032_trickle_voltages))
+			val = FIELD_PREP(RV3032_PMU_TCM, i) |
+			      FIELD_PREP(RV3032_PMU_BSM, RV3032_PMU_BSM_LSM);
+	}
+
+	if (device_property_read_u32(dev, "trickle-resistor-ohms", &ohms))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(rv3032_trickle_resistors); i++)
+		if (ohms == rv3032_trickle_resistors[i])
+			break;
+
+	if (i >= ARRAY_SIZE(rv3032_trickle_resistors)) {
+		dev_warn(dev, "invalid trickle resistor value\n");
+
+		return 0;
+	}
+
+	return rv3032_update_cfg(rv3032, RV3032_PMU,
+				 RV3032_PMU_TCR | RV3032_PMU_TCM | RV3032_PMU_BSM,
+				 val | FIELD_PREP(RV3032_PMU_TCR, i));
+}
+
+#ifdef CONFIG_COMMON_CLK
+#define clkout_hw_to_rv3032(hw) container_of(hw, struct rv3032_data, clkout_hw)
+
+static int clkout_xtal_rates[] = {
+	32768,
+	1024,
+	64,
+	1,
+};
+
+#define RV3032_HFD_STEP 8192
+
+static unsigned long rv3032_clkout_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	int clkout, ret;
+	struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
+
+	ret = regmap_read(rv3032->regmap, RV3032_CLKOUT2, &clkout);
+	if (ret < 0)
+		return 0;
+
+	if (clkout & RV3032_CLKOUT2_OS) {
+		unsigned long rate = FIELD_GET(RV3032_CLKOUT2_HFD_MSK, clkout) << 8;
+
+		ret = regmap_read(rv3032->regmap, RV3032_CLKOUT1, &clkout);
+		if (ret < 0)
+			return 0;
+
+		rate += clkout + 1;
+
+		return rate * RV3032_HFD_STEP;
+	}
+
+	return clkout_xtal_rates[FIELD_GET(RV3032_CLKOUT2_FD_MSK, clkout)];
+}
+
+static long rv3032_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	int i, hfd;
+
+	if (rate < RV3032_HFD_STEP)
+		for (i = 0; i < ARRAY_SIZE(clkout_xtal_rates); i++)
+			if (clkout_xtal_rates[i] <= rate)
+				return clkout_xtal_rates[i];
+
+	hfd = DIV_ROUND_CLOSEST(rate, RV3032_HFD_STEP);
+
+	return RV3032_HFD_STEP * clamp(hfd, 0, 8192);
+}
+
+static int rv3032_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
+	u32 status, eerd;
+	int i, hfd, ret;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_xtal_rates); i++) {
+		if (clkout_xtal_rates[i] == rate) {
+			return rv3032_update_cfg(rv3032, RV3032_CLKOUT2, 0xff,
+						 FIELD_PREP(RV3032_CLKOUT2_FD_MSK, i));
+		}
+	}
+
+	hfd = DIV_ROUND_CLOSEST(rate, RV3032_HFD_STEP);
+	hfd = clamp(hfd, 1, 8192) - 1;
+
+	ret = rv3032_enter_eerd(rv3032, &eerd);
+	if (ret)
+		goto exit_eerd;
+
+	ret = regmap_write(rv3032->regmap, RV3032_CLKOUT1, hfd & 0xff);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(rv3032->regmap, RV3032_CLKOUT2, RV3032_CLKOUT2_OS |
+			    FIELD_PREP(RV3032_CLKOUT2_HFD_MSK, hfd >> 8));
+	if (ret)
+		goto exit_eerd;
+
+	ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, RV3032_EEPROM_CMD_UPDATE);
+	if (ret)
+		goto exit_eerd;
+
+	usleep_range(46000, RV3032_EEBUSY_TIMEOUT);
+
+	ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
+				       !(status & RV3032_TLSB_EEBUSY),
+				       RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
+
+exit_eerd:
+	rv3032_exit_eerd(rv3032, eerd);
+
+	return ret;
+}
+
+static int rv3032_clkout_prepare(struct clk_hw *hw)
+{
+	struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
+
+	return rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_NCLKE, 0);
+}
+
+static void rv3032_clkout_unprepare(struct clk_hw *hw)
+{
+	struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
+
+	rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_NCLKE, RV3032_PMU_NCLKE);
+}
+
+static int rv3032_clkout_is_prepared(struct clk_hw *hw)
+{
+	int val, ret;
+	struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
+
+	ret = regmap_read(rv3032->regmap, RV3032_PMU, &val);
+	if (ret < 0)
+		return ret;
+
+	return !(val & RV3032_PMU_NCLKE);
+}
+
+static const struct clk_ops rv3032_clkout_ops = {
+	.prepare = rv3032_clkout_prepare,
+	.unprepare = rv3032_clkout_unprepare,
+	.is_prepared = rv3032_clkout_is_prepared,
+	.recalc_rate = rv3032_clkout_recalc_rate,
+	.round_rate = rv3032_clkout_round_rate,
+	.set_rate = rv3032_clkout_set_rate,
+};
+
+static int rv3032_clkout_register_clk(struct rv3032_data *rv3032,
+				      struct i2c_client *client)
+{
+	int ret;
+	struct clk *clk;
+	struct clk_init_data init;
+	struct device_node *node = client->dev.of_node;
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_TLSB, RV3032_TLSB_CLKF, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2, RV3032_CTRL2_CLKIE, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(rv3032->regmap, RV3032_CLK_IRQ, 0);
+	if (ret < 0)
+		return ret;
+
+	init.name = "rv3032-clkout";
+	init.ops = &rv3032_clkout_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	rv3032->clkout_hw.init = &init;
+
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	clk = devm_clk_register(&client->dev, &rv3032->clkout_hw);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return 0;
+}
+#endif
+
+static int rv3032_hwmon_read_temp(struct device *dev, long *mC)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+	u8 buf[2];
+	int temp, prev = 0;
+	int ret;
+
+	ret = regmap_bulk_read(rv3032->regmap, RV3032_TLSB, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	temp = sign_extend32(buf[1], 7) << 4;
+	temp |= FIELD_GET(RV3032_TLSB_TEMP, buf[0]);
+
+	/* No blocking or shadowing on RV3032_TLSB and RV3032_TMSB */
+	do {
+		prev = temp;
+
+		ret = regmap_bulk_read(rv3032->regmap, RV3032_TLSB, buf, sizeof(buf));
+		if (ret)
+			return ret;
+
+		temp = sign_extend32(buf[1], 7) << 4;
+		temp |= FIELD_GET(RV3032_TLSB_TEMP, buf[0]);
+	} while (temp != prev);
+
+	*mC = (temp * 1000) / 16;
+
+	return 0;
+}
+
+static umode_t rv3032_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
+				       u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int rv3032_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			     u32 attr, int channel, long *temp)
+{
+	int err;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		err = rv3032_hwmon_read_temp(dev, temp);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	return err;
+}
+
+static const struct hwmon_channel_info *rv3032_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST),
+	NULL
+};
+
+static const struct hwmon_ops rv3032_hwmon_hwmon_ops = {
+	.is_visible = rv3032_hwmon_is_visible,
+	.read = rv3032_hwmon_read,
+};
+
+static const struct hwmon_chip_info rv3032_hwmon_chip_info = {
+	.ops = &rv3032_hwmon_hwmon_ops,
+	.info = rv3032_hwmon_info,
+};
+
+static void rv3032_hwmon_register(struct device *dev)
+{
+	struct rv3032_data *rv3032 = dev_get_drvdata(dev);
+
+	if (!IS_REACHABLE(CONFIG_HWMON))
+		return;
+
+	devm_hwmon_device_register_with_info(dev, "rv3032", rv3032, &rv3032_hwmon_chip_info, NULL);
+}
+
+static struct rtc_class_ops rv3032_rtc_ops = {
+	.read_time = rv3032_get_time,
+	.set_time = rv3032_set_time,
+	.read_offset = rv3032_read_offset,
+	.set_offset = rv3032_set_offset,
+	.ioctl = rv3032_ioctl,
+};
+
+static const struct regmap_config regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xCA,
+};
+
+static int rv3032_probe(struct i2c_client *client)
+{
+	struct rv3032_data *rv3032;
+	int ret, status;
+	struct nvmem_config nvmem_cfg = {
+		.name = "rv3032_nvram",
+		.word_size = 1,
+		.stride = 1,
+		.size = 16,
+		.type = NVMEM_TYPE_BATTERY_BACKED,
+		.reg_read = rv3032_nvram_read,
+		.reg_write = rv3032_nvram_write,
+	};
+	struct nvmem_config eeprom_cfg = {
+		.name = "rv3032_eeprom",
+		.word_size = 1,
+		.stride = 1,
+		.size = 32,
+		.type = NVMEM_TYPE_EEPROM,
+		.reg_read = rv3032_eeprom_read,
+		.reg_write = rv3032_eeprom_write,
+	};
+
+	rv3032 = devm_kzalloc(&client->dev, sizeof(struct rv3032_data),
+			      GFP_KERNEL);
+	if (!rv3032)
+		return -ENOMEM;
+
+	rv3032->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(rv3032->regmap))
+		return PTR_ERR(rv3032->regmap);
+
+	i2c_set_clientdata(client, rv3032);
+
+	ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	rv3032->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(rv3032->rtc))
+		return PTR_ERR(rv3032->rtc);
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, rv3032_handle_irq,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						"rv3032", rv3032);
+		if (ret) {
+			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
+			client->irq = 0;
+		} else {
+			rv3032_rtc_ops.read_alarm = rv3032_get_alarm;
+			rv3032_rtc_ops.set_alarm = rv3032_set_alarm;
+			rv3032_rtc_ops.alarm_irq_enable = rv3032_alarm_irq_enable;
+		}
+	}
+
+	ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL1,
+				 RV3032_CTRL1_WADA, RV3032_CTRL1_WADA);
+	if (ret)
+		return ret;
+
+	rv3032_trickle_charger_setup(&client->dev, rv3032);
+
+	rv3032->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rv3032->rtc->range_max = RTC_TIMESTAMP_END_2099;
+	rv3032->rtc->ops = &rv3032_rtc_ops;
+	ret = rtc_register_device(rv3032->rtc);
+	if (ret)
+		return ret;
+
+	nvmem_cfg.priv = rv3032;
+	rtc_nvmem_register(rv3032->rtc, &nvmem_cfg);
+	eeprom_cfg.priv = rv3032;
+	rtc_nvmem_register(rv3032->rtc, &eeprom_cfg);
+
+	rv3032->rtc->max_user_freq = 1;
+
+#ifdef CONFIG_COMMON_CLK
+	rv3032_clkout_register_clk(rv3032, client);
+#endif
+
+	rv3032_hwmon_register(&client->dev);
+
+	return 0;
+}
+
+static const struct of_device_id rv3032_of_match[] = {
+	{ .compatible = "microcrystal,rv3032", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rv3032_of_match);
+
+static struct i2c_driver rv3032_driver = {
+	.driver = {
+		.name = "rtc-rv3032",
+		.of_match_table = of_match_ptr(rv3032_of_match),
+	},
+	.probe_new	= rv3032_probe,
+};
+module_i2c_driver(rv3032_driver);
+
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
+MODULE_DESCRIPTION("Micro Crystal RV3032 RTC driver");
+MODULE_LICENSE("GPL v2");

drivers/rtc/rtc-rv8803.c

@@ -454,13 +454,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 static int rv8803_nvram_write(void *priv, unsigned int offset, void *val,
 			      size_t bytes)
 {
-	int ret;
-
-	ret = rv8803_write_reg(priv, RV8803_RAM, *(u8 *)val);
-	if (ret)
-		return ret;
-
-	return 0;
+	return rv8803_write_reg(priv, RV8803_RAM, *(u8 *)val);
 }
 
 static int rv8803_nvram_read(void *priv, unsigned int offset,

drivers/rtc/rtc-rx8010.c

@@ -11,42 +11,43 @@
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/regmap.h>
 #include <linux/rtc.h>
 
-#define RX8010_SEC     0x10
-#define RX8010_MIN     0x11
-#define RX8010_HOUR    0x12
-#define RX8010_WDAY    0x13
-#define RX8010_MDAY    0x14
-#define RX8010_MONTH   0x15
-#define RX8010_YEAR    0x16
-#define RX8010_RESV17  0x17
-#define RX8010_ALMIN   0x18
-#define RX8010_ALHOUR  0x19
-#define RX8010_ALWDAY  0x1A
-#define RX8010_TCOUNT0 0x1B
-#define RX8010_TCOUNT1 0x1C
-#define RX8010_EXT     0x1D
-#define RX8010_FLAG    0x1E
-#define RX8010_CTRL    0x1F
+#define RX8010_SEC		0x10
+#define RX8010_MIN		0x11
+#define RX8010_HOUR		0x12
+#define RX8010_WDAY		0x13
+#define RX8010_MDAY		0x14
+#define RX8010_MONTH		0x15
+#define RX8010_YEAR		0x16
+#define RX8010_RESV17		0x17
+#define RX8010_ALMIN		0x18
+#define RX8010_ALHOUR		0x19
+#define RX8010_ALWDAY		0x1A
+#define RX8010_TCOUNT0		0x1B
+#define RX8010_TCOUNT1		0x1C
+#define RX8010_EXT		0x1D
+#define RX8010_FLAG		0x1E
+#define RX8010_CTRL		0x1F
 /* 0x20 to 0x2F are user registers */
-#define RX8010_RESV30  0x30
-#define RX8010_RESV31  0x31
-#define RX8010_IRQ     0x32
+#define RX8010_RESV30		0x30
+#define RX8010_RESV31		0x31
+#define RX8010_IRQ		0x32
 
-#define RX8010_EXT_WADA  BIT(3)
+#define RX8010_EXT_WADA		BIT(3)
 
-#define RX8010_FLAG_VLF  BIT(1)
-#define RX8010_FLAG_AF   BIT(3)
-#define RX8010_FLAG_TF   BIT(4)
-#define RX8010_FLAG_UF   BIT(5)
+#define RX8010_FLAG_VLF		BIT(1)
+#define RX8010_FLAG_AF		BIT(3)
+#define RX8010_FLAG_TF		BIT(4)
+#define RX8010_FLAG_UF		BIT(5)
 
-#define RX8010_CTRL_AIE  BIT(3)
-#define RX8010_CTRL_UIE  BIT(5)
-#define RX8010_CTRL_STOP BIT(6)
-#define RX8010_CTRL_TEST BIT(7)
+#define RX8010_CTRL_AIE		BIT(3)
+#define RX8010_CTRL_UIE		BIT(5)
+#define RX8010_CTRL_STOP	BIT(6)
+#define RX8010_CTRL_TEST	BIT(7)
 
-#define RX8010_ALARM_AE  BIT(7)
+#define RX8010_ALARM_AE		BIT(7)
 
 static const struct i2c_device_id rx8010_id[] = {
 	{ "rx8010", 0 },
@@ -61,7 +62,7 @@ static const struct of_device_id rx8010_of_match[] = {
 MODULE_DEVICE_TABLE(of, rx8010_of_match);
 
 struct rx8010_data {
-	struct i2c_client *client;
+	struct regmap *regs;
 	struct rtc_device *rtc;
 	u8 ctrlreg;
 };
@@ -70,13 +71,12 @@ static irqreturn_t rx8010_irq_1_handler(int irq, void *dev_id)
 {
 	struct i2c_client *client = dev_id;
 	struct rx8010_data *rx8010 = i2c_get_clientdata(client);
-	int flagreg;
+	int flagreg, err;
 
 	mutex_lock(&rx8010->rtc->ops_lock);
 
-	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
-
-	if (flagreg <= 0) {
+	err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
+	if (err) {
 		mutex_unlock(&rx8010->rtc->ops_lock);
 		return IRQ_NONE;
 	}
@@ -99,32 +99,29 @@ static irqreturn_t rx8010_irq_1_handler(int irq, void *dev_id)
 		rtc_update_irq(rx8010->rtc, 1, RTC_UF | RTC_IRQF);
 	}
 
-	i2c_smbus_write_byte_data(client, RX8010_FLAG, flagreg);
-
+	err = regmap_write(rx8010->regs, RX8010_FLAG, flagreg);
 	mutex_unlock(&rx8010->rtc->ops_lock);
-	return IRQ_HANDLED;
+	return err ? IRQ_NONE : IRQ_HANDLED;
 }
 
 static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
 {
 	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
-	u8 date[7];
-	int flagreg;
-	int err;
+	u8 date[RX8010_YEAR - RX8010_SEC + 1];
+	int flagreg, err;
 
-	flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
-	if (flagreg < 0)
-		return flagreg;
+	err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
+	if (err)
+		return err;
 
 	if (flagreg & RX8010_FLAG_VLF) {
 		dev_warn(dev, "Frequency stop detected\n");
 		return -EINVAL;
 	}
 
-	err = i2c_smbus_read_i2c_block_data(rx8010->client, RX8010_SEC,
-					    7, date);
-	if (err != 7)
-		return err < 0 ? err : -EIO;
+	err = regmap_bulk_read(rx8010->regs, RX8010_SEC, date, sizeof(date));
+	if (err)
+		return err;
 
 	dt->tm_sec = bcd2bin(date[RX8010_SEC - RX8010_SEC] & 0x7f);
 	dt->tm_min = bcd2bin(date[RX8010_MIN - RX8010_SEC] & 0x7f);
@@ -140,22 +137,13 @@ static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
 static int rx8010_set_time(struct device *dev, struct rtc_time *dt)
 {
 	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
-	u8 date[7];
-	int ctrl, flagreg;
-	int ret;
-
-	if ((dt->tm_year < 100) || (dt->tm_year > 199))
-		return -EINVAL;
+	u8 date[RX8010_YEAR - RX8010_SEC + 1];
+	int err;
 
 	/* set STOP bit before changing clock/calendar */
-	ctrl = i2c_smbus_read_byte_data(rx8010->client, RX8010_CTRL);
-	if (ctrl < 0)
-		return ctrl;
-	rx8010->ctrlreg = ctrl | RX8010_CTRL_STOP;
-	ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
-					rx8010->ctrlreg);
-	if (ret < 0)
-		return ret;
+	err = regmap_set_bits(rx8010->regs, RX8010_CTRL, RX8010_CTRL_STOP);
+	if (err)
+		return err;
 
 	date[RX8010_SEC - RX8010_SEC] = bin2bcd(dt->tm_sec);
 	date[RX8010_MIN - RX8010_SEC] = bin2bcd(dt->tm_min);
@@ -165,66 +153,54 @@ static int rx8010_set_time(struct device *dev, struct rtc_time *dt)
 	date[RX8010_YEAR - RX8010_SEC] = bin2bcd(dt->tm_year - 100);
 	date[RX8010_WDAY - RX8010_SEC] = bin2bcd(1 << dt->tm_wday);
 
-	ret = i2c_smbus_write_i2c_block_data(rx8010->client,
-					     RX8010_SEC, 7, date);
-	if (ret < 0)
-		return ret;
+	err = regmap_bulk_write(rx8010->regs, RX8010_SEC, date, sizeof(date));
+	if (err)
+		return err;
 
 	/* clear STOP bit after changing clock/calendar */
-	ctrl = i2c_smbus_read_byte_data(rx8010->client, RX8010_CTRL);
-	if (ctrl < 0)
-		return ctrl;
-	rx8010->ctrlreg = ctrl & ~RX8010_CTRL_STOP;
-	ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
-					rx8010->ctrlreg);
-	if (ret < 0)
-		return ret;
-
-	flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
-	if (flagreg < 0) {
-		return flagreg;
-	}
+	err = regmap_clear_bits(rx8010->regs, RX8010_CTRL, RX8010_CTRL_STOP);
+	if (err)
+		return err;
 
-	if (flagreg & RX8010_FLAG_VLF)
-		ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG,
-						flagreg & ~RX8010_FLAG_VLF);
+	err = regmap_clear_bits(rx8010->regs, RX8010_FLAG, RX8010_FLAG_VLF);
+	if (err)
+		return err;
 
 	return 0;
 }
 
-static int rx8010_init_client(struct i2c_client *client)
+static int rx8010_init(struct device *dev)
 {
-	struct rx8010_data *rx8010 = i2c_get_clientdata(client);
+	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
 	u8 ctrl[2];
-	int need_clear = 0, err = 0;
+	int need_clear = 0, err;
 
 	/* Initialize reserved registers as specified in datasheet */
-	err = i2c_smbus_write_byte_data(client, RX8010_RESV17, 0xD8);
-	if (err < 0)
+	err = regmap_write(rx8010->regs, RX8010_RESV17, 0xD8);
+	if (err)
 		return err;
 
-	err = i2c_smbus_write_byte_data(client, RX8010_RESV30, 0x00);
-	if (err < 0)
+	err = regmap_write(rx8010->regs, RX8010_RESV30, 0x00);
+	if (err)
 		return err;
 
-	err = i2c_smbus_write_byte_data(client, RX8010_RESV31, 0x08);
-	if (err < 0)
+	err = regmap_write(rx8010->regs, RX8010_RESV31, 0x08);
+	if (err)
 		return err;
 
-	err = i2c_smbus_write_byte_data(client, RX8010_IRQ, 0x00);
-	if (err < 0)
+	err = regmap_write(rx8010->regs, RX8010_IRQ, 0x00);
+	if (err)
 		return err;
 
-	err = i2c_smbus_read_i2c_block_data(rx8010->client, RX8010_FLAG,
-					    2, ctrl);
-	if (err != 2)
-		return err < 0 ? err : -EIO;
+	err = regmap_bulk_read(rx8010->regs, RX8010_FLAG, ctrl, 2);
+	if (err)
+		return err;
 
 	if (ctrl[0] & RX8010_FLAG_VLF)
-		dev_warn(&client->dev, "Frequency stop was detected\n");
+		dev_warn(dev, "Frequency stop was detected\n");
 
 	if (ctrl[0] & RX8010_FLAG_AF) {
-		dev_warn(&client->dev, "Alarm was detected\n");
+		dev_warn(dev, "Alarm was detected\n");
 		need_clear = 1;
 	}
 
@@ -236,8 +212,8 @@ static int rx8010_init_client(struct i2c_client *client)
 
 	if (need_clear) {
 		ctrl[0] &= ~(RX8010_FLAG_AF | RX8010_FLAG_TF | RX8010_FLAG_UF);
-		err = i2c_smbus_write_byte_data(client, RX8010_FLAG, ctrl[0]);
-		if (err < 0)
+		err = regmap_write(rx8010->regs, RX8010_FLAG, ctrl[0]);
+		if (err)
 			return err;
 	}
 
@@ -249,18 +225,16 @@ static int rx8010_init_client(struct i2c_client *client)
 static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
-	struct i2c_client *client = rx8010->client;
 	u8 alarmvals[3];
-	int flagreg;
-	int err;
+	int flagreg, err;
 
-	err = i2c_smbus_read_i2c_block_data(client, RX8010_ALMIN, 3, alarmvals);
-	if (err != 3)
-		return err < 0 ? err : -EIO;
+	err = regmap_bulk_read(rx8010->regs, RX8010_ALMIN, alarmvals, 3);
+	if (err)
+		return err;
 
-	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
-	if (flagreg < 0)
-		return flagreg;
+	err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
+	if (err)
+		return err;
 
 	t->time.tm_sec = 0;
 	t->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
@@ -277,55 +251,38 @@ static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
 	u8 alarmvals[3];
-	int extreg, flagreg;
 	int err;
 
-	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
-	if (flagreg < 0) {
-		return flagreg;
-	}
-
 	if (rx8010->ctrlreg & (RX8010_CTRL_AIE | RX8010_CTRL_UIE)) {
 		rx8010->ctrlreg &= ~(RX8010_CTRL_AIE | RX8010_CTRL_UIE);
-		err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
-						rx8010->ctrlreg);
-		if (err < 0) {
+		err = regmap_write(rx8010->regs, RX8010_CTRL, rx8010->ctrlreg);
+		if (err)
 			return err;
-		}
 	}
 
-	flagreg &= ~RX8010_FLAG_AF;
-	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG, flagreg);
-	if (err < 0)
+	err = regmap_clear_bits(rx8010->regs, RX8010_FLAG, RX8010_FLAG_AF);
+	if (err)
 		return err;
 
 	alarmvals[0] = bin2bcd(t->time.tm_min);
 	alarmvals[1] = bin2bcd(t->time.tm_hour);
 	alarmvals[2] = bin2bcd(t->time.tm_mday);
 
-	err = i2c_smbus_write_i2c_block_data(rx8010->client, RX8010_ALMIN,
-					     2, alarmvals);
-	if (err < 0)
+	err = regmap_bulk_write(rx8010->regs, RX8010_ALMIN, alarmvals, 2);
+	if (err)
 		return err;
 
-	extreg = i2c_smbus_read_byte_data(client, RX8010_EXT);
-	if (extreg < 0)
-		return extreg;
-
-	extreg |= RX8010_EXT_WADA;
-	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_EXT, extreg);
-	if (err < 0)
+	err = regmap_clear_bits(rx8010->regs, RX8010_EXT, RX8010_EXT_WADA);
+	if (err)
 		return err;
 
 	if (alarmvals[2] == 0)
 		alarmvals[2] |= RX8010_ALARM_AE;
 
-	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_ALWDAY,
-					alarmvals[2]);
-	if (err < 0)
+	err = regmap_write(rx8010->regs, RX8010_ALWDAY, alarmvals[2]);
+	if (err)
 		return err;
 
 	if (t->enabled) {
@@ -335,9 +292,8 @@ static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 			rx8010->ctrlreg |=
 				(RX8010_CTRL_AIE | RX8010_CTRL_UIE);
 
-		err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
-						rx8010->ctrlreg);
-		if (err < 0)
+		err = regmap_write(rx8010->regs, RX8010_CTRL, rx8010->ctrlreg);
+		if (err)
 			return err;
 	}
 
@@ -347,11 +303,9 @@ static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 static int rx8010_alarm_irq_enable(struct device *dev,
 				   unsigned int enabled)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
-	int flagreg;
-	u8 ctrl;
 	int err;
+	u8 ctrl;
 
 	ctrl = rx8010->ctrlreg;
 
@@ -367,20 +321,14 @@ static int rx8010_alarm_irq_enable(struct device *dev,
 			ctrl &= ~RX8010_CTRL_AIE;
 	}
 
-	flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
-	if (flagreg < 0)
-		return flagreg;
-
-	flagreg &= ~RX8010_FLAG_AF;
-	err = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG, flagreg);
-	if (err < 0)
+	err = regmap_clear_bits(rx8010->regs, RX8010_FLAG, RX8010_FLAG_AF);
+	if (err)
 		return err;
 
 	if (ctrl != rx8010->ctrlreg) {
 		rx8010->ctrlreg = ctrl;
-		err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
-						rx8010->ctrlreg);
-		if (err < 0)
+		err = regmap_write(rx8010->regs, RX8010_CTRL, rx8010->ctrlreg);
+		if (err)
 			return err;
 	}
 
@@ -390,14 +338,13 @@ static int rx8010_alarm_irq_enable(struct device *dev,
 static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	struct rx8010_data *rx8010 = dev_get_drvdata(dev);
-	int tmp;
-	int flagreg;
+	int tmp, flagreg, err;
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
-		if (flagreg < 0)
-			return flagreg;
+		err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
+		if (err)
+			return err;
 
 		tmp = flagreg & RX8010_FLAG_VLF ? RTC_VL_DATA_INVALID : 0;
 		return put_user(tmp, (unsigned int __user *)arg);
@@ -407,65 +354,72 @@ static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 	}
 }
 
-static struct rtc_class_ops rx8010_rtc_ops = {
+static const struct rtc_class_ops rx8010_rtc_ops_default = {
+	.read_time = rx8010_get_time,
+	.set_time = rx8010_set_time,
+	.ioctl = rx8010_ioctl,
+};
+
+static const struct rtc_class_ops rx8010_rtc_ops_alarm = {
 	.read_time = rx8010_get_time,
 	.set_time = rx8010_set_time,
 	.ioctl = rx8010_ioctl,
+	.read_alarm = rx8010_read_alarm,
+	.set_alarm = rx8010_set_alarm,
+	.alarm_irq_enable = rx8010_alarm_irq_enable,
+};
+
+static const struct regmap_config rx8010_regmap_config = {
+	.name = "rx8010-rtc",
+	.reg_bits = 8,
+	.val_bits = 8,
 };
 
-static int rx8010_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int rx8010_probe(struct i2c_client *client)
 {
-	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
 	struct rx8010_data *rx8010;
 	int err = 0;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
-		| I2C_FUNC_SMBUS_I2C_BLOCK)) {
-		dev_err(&adapter->dev, "doesn't support required functionality\n");
-		return -EIO;
-	}
-
-	rx8010 = devm_kzalloc(&client->dev, sizeof(struct rx8010_data),
-			      GFP_KERNEL);
+	rx8010 = devm_kzalloc(dev, sizeof(*rx8010), GFP_KERNEL);
 	if (!rx8010)
 		return -ENOMEM;
 
-	rx8010->client = client;
 	i2c_set_clientdata(client, rx8010);
 
-	err = rx8010_init_client(client);
+	rx8010->regs = devm_regmap_init_i2c(client, &rx8010_regmap_config);
+	if (IS_ERR(rx8010->regs))
+		return PTR_ERR(rx8010->regs);
+
+	err = rx8010_init(dev);
 	if (err)
 		return err;
 
+	rx8010->rtc = devm_rtc_allocate_device(dev);
+	if (IS_ERR(rx8010->rtc))
+		return PTR_ERR(rx8010->rtc);
+
 	if (client->irq > 0) {
-		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
-		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+		dev_info(dev, "IRQ %d supplied\n", client->irq);
+		err = devm_request_threaded_irq(dev, client->irq, NULL,
 						rx8010_irq_1_handler,
 						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 						"rx8010", client);
-
 		if (err) {
-			dev_err(&client->dev, "unable to request IRQ\n");
-			client->irq = 0;
-		} else {
-			rx8010_rtc_ops.read_alarm = rx8010_read_alarm;
-			rx8010_rtc_ops.set_alarm = rx8010_set_alarm;
-			rx8010_rtc_ops.alarm_irq_enable = rx8010_alarm_irq_enable;
+			dev_err(dev, "unable to request IRQ\n");
+			return err;
 		}
-	}
 
-	rx8010->rtc = devm_rtc_device_register(&client->dev, client->name,
-		&rx8010_rtc_ops, THIS_MODULE);
-
-	if (IS_ERR(rx8010->rtc)) {
-		dev_err(&client->dev, "unable to register the class device\n");
-		return PTR_ERR(rx8010->rtc);
+		rx8010->rtc->ops = &rx8010_rtc_ops_alarm;
+	} else {
+		rx8010->rtc->ops = &rx8010_rtc_ops_default;
 	}
 
 	rx8010->rtc->max_user_freq = 1;
+	rx8010->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	rx8010->rtc->range_max = RTC_TIMESTAMP_END_2099;
 
-	return 0;
+	return rtc_register_device(rx8010->rtc);
 }
 
 static struct i2c_driver rx8010_driver = {
@@ -473,7 +427,7 @@ static struct i2c_driver rx8010_driver = {
 		.name = "rtc-rx8010",
 		.of_match_table = of_match_ptr(rx8010_of_match),
 	},
-	.probe		= rx8010_probe,
+	.probe_new	= rx8010_probe,
 	.id_table	= rx8010_id,
 };
 

drivers/rtc/rtc-s3c.c

@@ -494,13 +494,8 @@ static int s3c_rtc_probe(struct platform_device *pdev)
 	if (info->data->needs_src_clk) {
 		info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
 		if (IS_ERR(info->rtc_src_clk)) {
-			ret = PTR_ERR(info->rtc_src_clk);
-			if (ret != -EPROBE_DEFER)
-				dev_err(&pdev->dev,
-					"failed to find rtc source clock\n");
-			else
-				dev_dbg(&pdev->dev,
-					"probe deferred due to missing rtc src clk\n");
+			ret = dev_err_probe(&pdev->dev, PTR_ERR(info->rtc_src_clk),
+					    "failed to find rtc source clock\n");
 			goto err_src_clk;
 		}
 		ret = clk_prepare_enable(info->rtc_src_clk);

drivers/rtc/rtc-st-lpc.c

@@ -173,7 +173,7 @@ static int st_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	return 0;
 }
 
-static struct rtc_class_ops st_rtc_ops = {
+static const struct rtc_class_ops st_rtc_ops = {
 	.read_time		= st_rtc_read_time,
 	.set_time		= st_rtc_set_time,
 	.read_alarm		= st_rtc_read_alarm,

include/linux/mfd/mt6397/rtc.h

@@ -72,7 +72,6 @@ struct mtk_rtc_data {
 };
 
 struct mt6397_rtc {
-	struct device           *dev;
 	struct rtc_device       *rtc_dev;
 
 	/* Protect register access from multiple tasks */