Commit b817d936 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'asoc/fix/topology', 'asoc/fix/adau17x1',...

Merge remote-tracking branches 'asoc/fix/topology', 'asoc/fix/adau17x1', 'asoc/fix/rt5514', 'asoc/fix/rt5616', 'asoc/fix/rt5659' and 'asoc/fix/rt5663' into tmp
......@@ -90,6 +90,27 @@ static int adau17x1_pll_event(struct snd_soc_dapm_widget *w,
return 0;
}
static int adau17x1_adc_fixup(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
struct adau *adau = snd_soc_codec_get_drvdata(codec);
/*
* If we are capturing, toggle the ADOSR bit in Converter Control 0 to
* avoid losing SNR (workaround from ADI). This must be done after
* the ADC(s) have been enabled. According to the data sheet, it is
* normally illegal to set this bit when the sampling rate is 96 kHz,
* but according to ADI it is acceptable for this workaround.
*/
regmap_update_bits(adau->regmap, ADAU17X1_CONVERTER0,
ADAU17X1_CONVERTER0_ADOSR, ADAU17X1_CONVERTER0_ADOSR);
regmap_update_bits(adau->regmap, ADAU17X1_CONVERTER0,
ADAU17X1_CONVERTER0_ADOSR, 0);
return 0;
}
static const char * const adau17x1_mono_stereo_text[] = {
"Stereo",
"Mono Left Channel (L+R)",
......@@ -121,7 +142,8 @@ static const struct snd_soc_dapm_widget adau17x1_dapm_widgets[] = {
SND_SOC_DAPM_MUX("Right DAC Mode Mux", SND_SOC_NOPM, 0, 0,
&adau17x1_dac_mode_mux),
SND_SOC_DAPM_ADC("Left Decimator", NULL, ADAU17X1_ADC_CONTROL, 0, 0),
SND_SOC_DAPM_ADC_E("Left Decimator", NULL, ADAU17X1_ADC_CONTROL, 0, 0,
adau17x1_adc_fixup, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_ADC("Right Decimator", NULL, ADAU17X1_ADC_CONTROL, 1, 0),
SND_SOC_DAPM_DAC("Left DAC", NULL, ADAU17X1_DAC_CONTROL0, 0, 0),
SND_SOC_DAPM_DAC("Right DAC", NULL, ADAU17X1_DAC_CONTROL0, 1, 0),
......
......@@ -129,5 +129,7 @@ bool adau17x1_has_dsp(struct adau *adau);
#define ADAU17X1_CONVERTER0_CONVSR_MASK 0x7
#define ADAU17X1_CONVERTER0_ADOSR BIT(3)
#endif
......@@ -145,9 +145,8 @@ static void rt5514_spi_copy_work(struct work_struct *work)
mutex_unlock(&rt5514_dsp->dma_lock);
}
static irqreturn_t rt5514_spi_irq(int irq, void *data)
static void rt5514_schedule_copy(struct rt5514_dsp *rt5514_dsp)
{
struct rt5514_dsp *rt5514_dsp = data;
u8 buf[8];
rt5514_dsp->get_size = 0;
......@@ -180,6 +179,13 @@ static irqreturn_t rt5514_spi_irq(int irq, void *data)
if (rt5514_dsp->buf_base && rt5514_dsp->buf_limit &&
rt5514_dsp->buf_rp && rt5514_dsp->buf_size)
schedule_delayed_work(&rt5514_dsp->copy_work, 0);
}
static irqreturn_t rt5514_spi_irq(int irq, void *data)
{
struct rt5514_dsp *rt5514_dsp = data;
rt5514_schedule_copy(rt5514_dsp);
return IRQ_HANDLED;
}
......@@ -199,12 +205,19 @@ static int rt5514_spi_hw_params(struct snd_pcm_substream *substream,
struct rt5514_dsp *rt5514_dsp =
snd_soc_platform_get_drvdata(rtd->platform);
int ret;
u8 buf[8];
mutex_lock(&rt5514_dsp->dma_lock);
ret = snd_pcm_lib_alloc_vmalloc_buffer(substream,
params_buffer_bytes(hw_params));
rt5514_dsp->substream = substream;
rt5514_dsp->dma_offset = 0;
/* Read IRQ status and schedule copy accordingly. */
rt5514_spi_burst_read(RT5514_IRQ_CTRL, (u8 *)&buf, sizeof(buf));
if (buf[0] & RT5514_IRQ_STATUS_BIT)
rt5514_schedule_copy(rt5514_dsp);
mutex_unlock(&rt5514_dsp->dma_lock);
return ret;
......
......@@ -20,6 +20,9 @@
#define RT5514_BUFFER_VOICE_BASE 0x18000200
#define RT5514_BUFFER_VOICE_LIMIT 0x18000204
#define RT5514_BUFFER_VOICE_WP 0x1800020c
#define RT5514_IRQ_CTRL 0x18002094
#define RT5514_IRQ_STATUS_BIT (0x1 << 5)
/* SPI Command */
enum {
......
......@@ -338,39 +338,6 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
fw = NULL;
}
if (rt5514->model_buf && rt5514->model_len) {
#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI)
int ret;
ret = rt5514_spi_burst_write(0x4ff80000,
rt5514->model_buf,
((rt5514->model_len / 8) + 1) * 8);
if (ret) {
dev_err(codec->dev,
"Model load failed %d\n", ret);
return ret;
}
#else
dev_err(codec->dev,
"No SPI driver for loading firmware\n");
#endif
} else {
request_firmware(&fw, RT5514_FIRMWARE3,
codec->dev);
if (fw) {
#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI)
rt5514_spi_burst_write(0x4ff80000,
fw->data,
((fw->size/8)+1)*8);
#else
dev_err(codec->dev,
"No SPI driver to load fw\n");
#endif
release_firmware(fw);
fw = NULL;
}
}
/* DSP run */
regmap_write(rt5514->i2c_regmap, 0x18002f00,
0x00055148);
......@@ -385,34 +352,6 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol,
return 0;
}
static int rt5514_hotword_model_put(struct snd_kcontrol *kcontrol,
const unsigned int __user *bytes, unsigned int size)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt5514_priv *rt5514 = snd_soc_component_get_drvdata(component);
struct snd_soc_codec *codec = rt5514->codec;
int ret = 0;
if (rt5514->model_buf || rt5514->model_len < size) {
if (rt5514->model_buf)
devm_kfree(codec->dev, rt5514->model_buf);
rt5514->model_buf = devm_kmalloc(codec->dev, size, GFP_KERNEL);
if (!rt5514->model_buf) {
ret = -ENOMEM;
goto done;
}
}
/* Skips the TLV header. */
bytes += 2;
if (copy_from_user(rt5514->model_buf, bytes, size))
ret = -EFAULT;
done:
rt5514->model_len = (ret ? 0 : size);
return ret;
}
static const struct snd_kcontrol_new rt5514_snd_controls[] = {
SOC_DOUBLE_TLV("MIC Boost Volume", RT5514_ANA_CTRL_MICBST,
RT5514_SEL_BSTL_SFT, RT5514_SEL_BSTR_SFT, 8, 0, bst_tlv),
......@@ -424,8 +363,6 @@ static const struct snd_kcontrol_new rt5514_snd_controls[] = {
adc_vol_tlv),
SOC_SINGLE_EXT("DSP Voice Wake Up", SND_SOC_NOPM, 0, 1, 0,
rt5514_dsp_voice_wake_up_get, rt5514_dsp_voice_wake_up_put),
SND_SOC_BYTES_TLV("Hotword Model", 0x8504,
NULL, rt5514_hotword_model_put),
};
/* ADC Mixer*/
......
......@@ -255,7 +255,6 @@
#define RT5514_FIRMWARE1 "rt5514_dsp_fw1.bin"
#define RT5514_FIRMWARE2 "rt5514_dsp_fw2.bin"
#define RT5514_FIRMWARE3 "rt5514_dsp_fw3.bin"
/* System Clock Source */
enum {
......@@ -282,8 +281,6 @@ struct rt5514_priv {
int pll_in;
int pll_out;
int dsp_enabled;
u8 *model_buf;
unsigned int model_len;
};
#endif /* __RT5514_H__ */
......@@ -98,7 +98,7 @@ static const struct reg_default rt5616_reg[] = {
{ 0x8e, 0x0004 },
{ 0x8f, 0x1100 },
{ 0x90, 0x0000 },
{ 0x91, 0x0000 },
{ 0x91, 0x0c00 },
{ 0x92, 0x0000 },
{ 0x93, 0x2000 },
{ 0x94, 0x0200 },
......
......@@ -2744,7 +2744,8 @@ static const struct snd_soc_dapm_widget rt5659_dapm_widgets[] = {
SND_SOC_DAPM_PRE_PMU),
SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, rt5659_hp_event,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA("LOUT Amp", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("LOUT Amp", 1, RT5659_PWR_ANLG_1, RT5659_PWR_LM_BIT,
0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Charge Pump", SND_SOC_NOPM, 0, 0,
rt5659_charge_pump_event, SND_SOC_DAPM_PRE_PMU |
......@@ -3208,6 +3209,7 @@ static const struct snd_soc_dapm_route rt5659_dapm_routes[] = {
{ "LOUT R MIX", "OUTVOL R Switch", "OUTVOL R" },
{ "LOUT Amp", NULL, "LOUT L MIX" },
{ "LOUT Amp", NULL, "LOUT R MIX" },
{ "LOUT Amp", NULL, "Charge Pump" },
{ "LOUT Amp", NULL, "SYS CLK DET" },
{ "LOUT L Playback", "Switch", "LOUT Amp" },
{ "LOUT R Playback", "Switch", "LOUT Amp" },
......
......@@ -1639,7 +1639,8 @@ static irqreturn_t rt5663_irq(int irq, void *data)
{
struct rt5663_priv *rt5663 = data;
dev_dbg(rt5663->codec->dev, "%s IRQ queue work\n", __func__);
dev_dbg(regmap_get_device(rt5663->regmap), "%s IRQ queue work\n",
__func__);
queue_delayed_work(system_wq, &rt5663->jack_detect_work,
msecs_to_jiffies(250));
......
......@@ -1301,7 +1301,7 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_denum_create(
/* validate kcontrol */
if (strnlen(ec->hdr.name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) ==
SNDRV_CTL_ELEM_ID_NAME_MAXLEN)
return NULL;
goto err;
se = kzalloc(sizeof(*se), GFP_KERNEL);
if (se == NULL)
......@@ -1378,6 +1378,9 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_denum_create(
for (; i >= 0; i--) {
/* free values and texts */
se = (struct soc_enum *)kc[i].private_value;
if (!se)
continue;
kfree(se->dobj.control.dvalues);
for (j = 0; j < ec->items; j++)
kfree(se->dobj.control.dtexts[j]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment