Merge commit 'v2.6.28-rc7' into tracing/core

Documentation/DMA-API.txt

@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.

Documentation/cpu-freq/user-guide.txt

@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================

Documentation/filesystems/ocfs2.txt

@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs

Documentation/filesystems/proc.txt

@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+

Documentation/filesystems/ramfs-rootfs-initramfs.txt

@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

Documentation/input/input-programming.txt

@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1072,10 +1072,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
+	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6	Dell desktops
+	  dell-m6-amic	Dell desktops/laptops with analog mics
+	  dell-m6-dmic	Dell desktops/laptops with digital mics
+	  dell-m6	Dell desktops/laptops with both type of mics
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110

Documentation/spi/spi-summary

@@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
 	 */
-	static struct mysoc_spi_data __init pdata = { ... };
+	static struct mysoc_spi_data __initdata pdata = { ... };
 
 	static __init board_init(void)
 	{

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc6
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc7
+NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/Kconfig

@@ -79,8 +79,6 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
-#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
-#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h

arch/alpha/kernel/pci.c

@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

arch/alpha/kernel/smp.c

@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __init
+void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __init
+static void __cpuinit
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __init
+static int __cpuinit
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;

arch/alpha/kernel/traps.c

@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __init
+static void __cpuinit
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	return;
 }
 
-void __init
+void __cpuinit
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

arch/arm/configs/corgi_defconfig

@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set

arch/arm/mach-pxa/mioa701.c

@@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
 
 	/* Devices prepare suspend */
-	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 

arch/arm/mach-pxa/mioa701_bootresume.S

@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
 	mov	r0,     #0xa0000000	@ Don't suppose memory access works
 	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	orr	r0, r0, #0x0000b000
 	mov	r1, #0
 	str	r1, [r0]		@ Early disable resume for next boot
 	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)

arch/arm/mach-pxa/palmtx.c

@@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
 
 	/* AC97 */
 	GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 
 	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
 	GPIO46_FICP_RXD,
 	GPIO47_FICP_TXD,
 
@@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO16_PWM0_OUT,
 
 	/* USB */
-	GPIO13_GPIO,
+	GPIO13_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO94_GPIO,	/* wifi power 1 */
+	GPIO108_GPIO,	/* wifi power 2 */
+	GPIO116_GPIO,	/* wifi ready */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MISC. */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
 };
 
 /******************************************************************************
@@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
 	int err = 0;
 
 	/* Setup an interrupt for detecting card insert/remove events */
-	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
-			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"SD/MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
 				__func__);
-		return err;
+		goto err2;
 	}
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
 	if (err)
-		goto pwr_err;
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+	if (err)
+		goto err4;
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
 	if (err)
-		goto ro_err;
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+	if (err)
+		goto err5;
 
 	printk(KERN_DEBUG "%s: irq registered\n", __func__);
 
 	return 0;
 
-ro_err:
+err5:
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
 	return err;
 }
 
@@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
 }
 
 static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = {
 
 	KEY(3, 0, KEY_RIGHT),
 	KEY(3, 2, KEY_LEFT),
-
 };
 
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev)
 	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+	if (ret)
+		goto err2;
 	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
 	if (ret)
 		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+	if (ret)
+		goto err3;
 
 	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
 err2:
 	gpio_free(GPIO_NR_PALMTX_BL_POWER);
 err:
@@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
 static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.startup		= palmtx_irda_startup,
+	.shutdown		= palmtx_irda_shutdown,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= palmtx_irda_transceiver_mode,
 };
@@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
-	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
-	udelay(50);
-	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.udc_command		= palmtx_udc_command,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup_inverted	= 0,
 };
 
 /******************************************************************************
@@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev)
 
 	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
-		goto err_cs_ac;
-
-	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
 	if (ret)
-		goto err_cs_usb;
+		goto err2;
 
 	return 0;
 
-err_cs_usb:
+err2:
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
 	return ret;
 }
 
@@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void)
 	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
-static int palmtx_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
@@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
 	.init            = power_supply_init,
 	.is_ac_online    = palmtx_is_ac_online,
-	.is_usb_online   = palmtx_is_usb_online,
 	.exit            = power_supply_exit,
 	.supplied_to     = palmtx_supplicants,
 	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	}
+}
+
+
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
+	palmtx_udc_init();
 	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -385,6 +385,7 @@ static struct soc_camera_link iclink[] = {
 		.gpio	= NR_BUILTIN_GPIO + 1,
 	}, {
 		.bus_id	= 0, /* Must match with the camera ID above */
+		.gpio	= -ENXIO,
 	}
 };
 

arch/arm/mach-s3c2410/include/mach/spi-gpio.h

@@ -18,6 +18,7 @@ struct s3c2410_spigpio_info {
 	unsigned long		 pin_mosi;
 	unsigned long		 pin_miso;
 
+	int			 num_chipselect;
 	int			 bus_num;
 
 	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);

arch/arm/plat-omap/gpio.c

@@ -101,6 +101,7 @@
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
 #define OMAP24XX_GPIO_IRQENABLE1	0x001c
+#define OMAP24XX_GPIO_WAKE_EN		0x0020
 #define OMAP24XX_GPIO_CTRL		0x0030
 #define OMAP24XX_GPIO_OE		0x0034
 #define OMAP24XX_GPIO_DATAIN		0x0038
@@ -1551,7 +1552,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
-			wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
@@ -1574,7 +1575,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 {
 	int i;
 
-	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
 		return 0;
 
 	for (i = 0; i < gpio_bank_count; i++) {

arch/arm/plat-omap/include/mach/pm.h

@@ -128,7 +128,7 @@ void clk_deny_idle(struct clk *clk);
  * clk_allow_idle - Counters previous clk_deny_idle
  * @clk: clock signal handle
  */
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
 
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);

arch/frv/kernel/sys_frv.c

@@ -35,22 +35,21 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	int error = -EBADF;
 	struct file * file = NULL;
 
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
 	/* As with sparc32, make sure the shift for mmap2 is constant
 	   (12), no matter what PAGE_SIZE we have.... */
 
 	/* But unlike sparc32, don't just silently break if we're
 	   trying to map something we can't */
-	if (pgoff & ((1<<(PAGE_SHIFT-12))-1))
+	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
 		return -EINVAL;
+	pgoff >>= PAGE_SHIFT - 12;
 
-	pgoff >>= (PAGE_SHIFT - 12);
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			goto out;
+	}
 
 	down_write(&current->mm->mmap_sem);
 	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);

arch/ia64/include/asm/ptrace.h

@@ -325,8 +325,6 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
   #define arch_has_block_step()   (1)
   extern void user_enable_block_step(struct task_struct *);
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #endif /* !__KERNEL__ */
 
 /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */

arch/ia64/sn/kernel/io_init.c

@@ -292,7 +292,7 @@ EXPORT_SYMBOL(sn_io_slot_fixup);
  * sn_pci_controller_fixup() - This routine sets up a bus's resources
  *			       consistent with the Linux PCI abstraction layer.
  */
-static void
+static void __init
 sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
 	s64 status = 0;

arch/m32r/kernel/head.S

@@ -23,7 +23,7 @@ __INITDATA
 /*
  * References to members of the boot_cpu_data structure.
  */
-	.text
+.section .text.head, "ax"
 	.global	start_kernel
 	.global __bss_start
 	.global _end
@@ -133,7 +133,6 @@ loop1:
 /*
  * AP startup routine
  */
-	.text
 	.global	eit_vector
 ENTRY(startup_AP)
 ;; setup EVB
@@ -230,6 +229,7 @@ ENTRY(startup_AP)
 	nop
 #endif  /* CONFIG_SMP */
 
+	.text
 ENTRY(stack_start)
 	.long	init_thread_union+8192
 	.long	__KERNEL_DS

arch/m32r/kernel/vmlinux.lds.S

@@ -27,6 +27,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
+	*(.text.head)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT

arch/mips/include/asm/bug.h

@@ -7,20 +7,31 @@
 
 #include <asm/break.h>
 
-#define BUG()								\
-do {									\
-	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));		\
-} while (0)
+static inline void __noreturn BUG(void)
+{
+	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+	/* Fool GCC into thinking the function doesn't return. */
+	while (1)
+		;
+}
 
 #define HAVE_ARCH_BUG
 
 #if (_MIPS_ISA > _MIPS_ISA_MIPS1)
 
-#define BUG_ON(condition)						\
-do {									\
-	__asm__ __volatile__("tne $0, %0, %1"				\
-			     : : "r" (condition), "i" (BRK_BUG));	\
-} while (0)
+static inline void  __BUG_ON(unsigned long condition)
+{
+	if (__builtin_constant_p(condition)) {
+		if (condition)
+			BUG();
+		else
+			return;
+	}
+	__asm__ __volatile__("tne $0, %0, %1"
+			     : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
 
 #define HAVE_ARCH_BUG_ON
 

arch/mips/include/asm/ptrace.h

@@ -9,10 +9,6 @@
 #ifndef _ASM_PTRACE_H
 #define _ASM_PTRACE_H
 
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
 /* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
 #define FPR_BASE	32
 #define PC		64

arch/mn10300/kernel/gdb-stub.c

@@ -522,17 +522,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
 	} else {
 		switch (cur) {
 			/* Bxx (d8,PC) */
-		case 0xc0:
-		case 0xc1:
-		case 0xc2:
-		case 0xc3:
-		case 0xc4:
-		case 0xc5:
-		case 0xc6:
-		case 0xc7:
-		case 0xc8:
-		case 0xc9:
-		case 0xca:
+		case 0xc0 ... 0xca:
 			if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
 				goto fault;
 			if (!__gdbstub_mark_bp(pc + 2, 0))
@@ -543,17 +533,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
 			break;
 
 			/* LXX (d8,PC) */
-		case 0xd0:
-		case 0xd1:
-		case 0xd2:
-		case 0xd3:
-		case 0xd4:
-		case 0xd5:
-		case 0xd6:
-		case 0xd7:
-		case 0xd8:
-		case 0xd9:
-		case 0xda:
+		case 0xd0 ... 0xda:
 			if (!__gdbstub_mark_bp(pc + 1, 0))
 				goto fault;
 			if (regs->pc != regs->lar &&

arch/parisc/include/asm/parisc-device.h

@@ -42,9 +42,9 @@ struct parisc_driver {
 #define to_parisc_driver(d)	container_of(d, struct parisc_driver, drv)
 #define parisc_parent(d)	to_parisc_device(d->dev.parent)
 
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
 {
-	return d->dev.bus_id;
+	return dev_name(&d->dev);
 }
 
 static inline void

arch/parisc/include/asm/posix_types.h

@@ -24,13 +24,12 @@ typedef int			__kernel_daddr_t;
 typedef unsigned long		__kernel_size_t;
 typedef long			__kernel_ssize_t;
 typedef long			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
 #else
 typedef unsigned int		__kernel_size_t;
 typedef int			__kernel_ssize_t;
 typedef int			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
 #endif
+typedef long			__kernel_time_t;
 typedef char *			__kernel_caddr_t;
 
 typedef unsigned short		__kernel_uid16_t;

arch/parisc/include/asm/ptrace.h

@@ -47,8 +47,6 @@ struct pt_regs {
 
 #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 struct task_struct;
 #define arch_has_single_step()	1
 void user_disable_single_step(struct task_struct *task);

arch/parisc/kernel/drivers.c

@@ -43,7 +43,7 @@ struct hppa_dma_ops *hppa_dma_ops __read_mostly;
 EXPORT_SYMBOL(hppa_dma_ops);
 
 static struct device root = {
-	.bus_id = "parisc",
+	.init_name = "parisc",
 };
 
 static inline int check_dev(struct device *dev)
@@ -393,7 +393,8 @@ EXPORT_SYMBOL(print_pci_hwpath);
 static void setup_bus_id(struct parisc_device *padev)
 {
 	struct hardware_path path;
-	char *output = padev->dev.bus_id;
+	char name[20];
+	char *output = name;
 	int i;
 
 	get_node_path(padev->dev.parent, &path);
@@ -404,6 +405,7 @@ static void setup_bus_id(struct parisc_device *padev)
 		output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
 	}
 	sprintf(output, "%u", (unsigned char) padev->hw_path);
+	dev_set_name(&padev->dev, name);
 }
 
 struct parisc_device * create_tree_node(char id, struct device *parent)

arch/parisc/kernel/traps.c

@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/console.h>
-#include <linux/kallsyms.h>
 #include <linux/bug.h>
 
 #include <asm/assembly.h>
@@ -51,7 +50,7 @@
 DEFINE_SPINLOCK(pa_dbit_lock);
 #endif
 
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
 	struct pt_regs *regs);
 
 static int printbinary(char *buf, unsigned long x, int nbits)
@@ -121,18 +120,19 @@ static void print_fr(char *level, struct pt_regs *regs)
 
 void show_regs(struct pt_regs *regs)
 {
-	int i;
+	int i, user;
 	char *level;
 	unsigned long cr30, cr31;
 
-	level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+	user = user_mode(regs);
+	level = user ? KERN_DEBUG : KERN_CRIT;
 
 	print_gr(level, regs);
 
 	for (i = 0; i < 8; i += 4)
 		PRINTREGS(level, regs->sr, "sr", RFMT, i);
 
-	if (user_mode(regs))
+	if (user)
 		print_fr(level, regs);
 
 	cr30 = mfctl(30);
@@ -145,14 +145,18 @@ void show_regs(struct pt_regs *regs)
 	printk("%s CPU: %8d   CR30: " RFMT " CR31: " RFMT "\n",
 	       level, current_thread_info()->cpu, cr30, cr31);
 	printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
-	printk(level);
-	print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
-	printk(level);
-	print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
-	printk(level);
-	print_symbol(" RP(r2): %s\n", regs->gr[2]);
+
+	if (user) {
+		printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+		printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+		printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+	} else {
+		printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+		printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+		printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
 
 		parisc_show_stack(current, NULL, regs);
+	}
 }
 
 
@@ -173,20 +177,15 @@ static void do_show_stack(struct unwind_frame_info *info)
 			break;
 
 		if (__kernel_text_address(info->ip)) {
-			printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
-			print_symbol("%s\n", info->ip);
-#else
-			if ((i & 0x03) == 0)
-				printk("\n");
-#endif
+			printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+				info->ip, (void *) info->ip);
 			i++;
 		}
 	}
-	printk("\n");
+	printk(KERN_CRIT "\n");
 }
 
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
 	struct pt_regs *regs)
 {
 	struct unwind_frame_info info;

arch/powerpc/boot/dts/mpc832x_rdb.dts

@@ -18,8 +18,8 @@ / {
 	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
+		ethernet0 = &enet1;
+		ethernet1 = &enet0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;

arch/powerpc/boot/dts/mpc8572ds.dts

@@ -90,7 +90,7 @@ L2: l2-cache-controller@20000 {
 			compatible = "fsl,mpc8572-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
+			cache-size = <0x100000>; // L2, 1M
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 		};

arch/powerpc/configs/86xx/gef_sbc610_defconfig

@@ -838,7 +838,7 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set

arch/powerpc/configs/ppc40x_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:56:44 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 09:54:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -500,15 +500,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -632,7 +634,13 @@ CONFIG_NETDEV_10000=y
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
 # CONFIG_GAMEPORT is not set
 
 #
@@ -660,7 +668,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -756,6 +765,11 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
 #
 # I2C GPIO expanders:
 #
@@ -776,11 +790,11 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -792,6 +806,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -816,13 +831,65 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -851,6 +918,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1077,10 +1145,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set