Commit b873f73c authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: bma150 - switch to using polled mode of input devices

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts bma150 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-21-dmitry.torokhov@gmail.comSigned-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 493a6ebd
......@@ -100,7 +100,6 @@ config INPUT_ATMEL_CAPTOUCH
config INPUT_BMA150
tristate "BMA150/SMB380 acceleration sensor support"
depends on I2C
select INPUT_POLLDEV
help
Say Y here if you have Bosch Sensortec's BMA150 or SMB380
acceleration sensor hooked to an I2C bus.
......
......@@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
......@@ -123,7 +122,6 @@
struct bma150_data {
struct i2c_client *client;
struct input_polled_dev *input_polled;
struct input_dev *input;
u8 mode;
};
......@@ -336,13 +334,16 @@ static irqreturn_t bma150_irq_thread(int irq, void *dev)
return IRQ_HANDLED;
}
static void bma150_poll(struct input_polled_dev *dev)
static void bma150_poll(struct input_dev *input)
{
bma150_report_xyz(dev->private);
struct bma150_data *bma150 = input_get_drvdata(input);
bma150_report_xyz(bma150);
}
static int bma150_open(struct bma150_data *bma150)
static int bma150_open(struct input_dev *input)
{
struct bma150_data *bma150 = input_get_drvdata(input);
int error;
error = pm_runtime_get_sync(&bma150->client->dev);
......@@ -362,42 +363,16 @@ static int bma150_open(struct bma150_data *bma150)
return 0;
}
static void bma150_close(struct bma150_data *bma150)
static void bma150_close(struct input_dev *input)
{
struct bma150_data *bma150 = input_get_drvdata(input);
pm_runtime_put_sync(&bma150->client->dev);
if (bma150->mode != BMA150_MODE_SLEEP)
bma150_set_mode(bma150, BMA150_MODE_SLEEP);
}
static int bma150_irq_open(struct input_dev *input)
{
struct bma150_data *bma150 = input_get_drvdata(input);
return bma150_open(bma150);
}
static void bma150_irq_close(struct input_dev *input)
{
struct bma150_data *bma150 = input_get_drvdata(input);
bma150_close(bma150);
}
static void bma150_poll_open(struct input_polled_dev *ipoll_dev)
{
struct bma150_data *bma150 = ipoll_dev->private;
bma150_open(bma150);
}
static void bma150_poll_close(struct input_polled_dev *ipoll_dev)
{
struct bma150_data *bma150 = ipoll_dev->private;
bma150_close(bma150);
}
static int bma150_initialize(struct bma150_data *bma150,
const struct bma150_cfg *cfg)
{
......@@ -439,71 +414,6 @@ static int bma150_initialize(struct bma150_data *bma150,
return bma150_set_mode(bma150, BMA150_MODE_SLEEP);
}
static void bma150_init_input_device(struct input_dev *idev)
{
idev->name = BMA150_DRIVER;
idev->phys = BMA150_DRIVER "/input0";
idev->id.bustype = BUS_I2C;
idev->evbit[0] = BIT_MASK(EV_ABS);
input_set_abs_params(idev, ABS_X, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
input_set_abs_params(idev, ABS_Y, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
input_set_abs_params(idev, ABS_Z, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
}
static int bma150_register_input_device(struct bma150_data *bma150)
{
struct input_dev *idev;
int error;
idev = devm_input_allocate_device(&bma150->client->dev);
if (!idev)
return -ENOMEM;
bma150_init_input_device(idev);
idev->open = bma150_irq_open;
idev->close = bma150_irq_close;
input_set_drvdata(idev, bma150);
bma150->input = idev;
error = input_register_device(idev);
if (error)
return error;
return 0;
}
static int bma150_register_polled_device(struct bma150_data *bma150)
{
struct input_polled_dev *ipoll_dev;
int error;
ipoll_dev = devm_input_allocate_polled_device(&bma150->client->dev);
if (!ipoll_dev)
return -ENOMEM;
ipoll_dev->private = bma150;
ipoll_dev->open = bma150_poll_open;
ipoll_dev->close = bma150_poll_close;
ipoll_dev->poll = bma150_poll;
ipoll_dev->poll_interval = BMA150_POLL_INTERVAL;
ipoll_dev->poll_interval_min = BMA150_POLL_MIN;
ipoll_dev->poll_interval_max = BMA150_POLL_MAX;
bma150_init_input_device(ipoll_dev->input);
bma150->input_polled = ipoll_dev;
bma150->input = ipoll_dev->input;
error = input_register_polled_device(ipoll_dev);
if (error)
return error;
return 0;
}
static int bma150_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -511,6 +421,7 @@ static int bma150_probe(struct i2c_client *client,
dev_get_platdata(&client->dev);
const struct bma150_cfg *cfg;
struct bma150_data *bma150;
struct input_dev *idev;
int chip_id;
int error;
......@@ -550,11 +461,39 @@ static int bma150_probe(struct i2c_client *client,
if (error)
return error;
if (client->irq > 0) {
error = bma150_register_input_device(bma150);
idev = devm_input_allocate_device(&bma150->client->dev);
if (!idev)
return -ENOMEM;
input_set_drvdata(idev, bma150);
bma150->input = idev;
idev->name = BMA150_DRIVER;
idev->phys = BMA150_DRIVER "/input0";
idev->id.bustype = BUS_I2C;
idev->open = bma150_open;
idev->close = bma150_close;
input_set_abs_params(idev, ABS_X, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
input_set_abs_params(idev, ABS_Y, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
input_set_abs_params(idev, ABS_Z, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
if (client->irq <= 0) {
error = input_setup_polling(idev, bma150_poll);
if (error)
return error;
input_set_poll_interval(idev, BMA150_POLL_INTERVAL);
input_set_min_poll_interval(idev, BMA150_POLL_MIN);
input_set_max_poll_interval(idev, BMA150_POLL_MAX);
}
error = input_register_device(idev);
if (error)
return error;
if (client->irq > 0) {
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, bma150_irq_thread,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
......@@ -565,10 +504,6 @@ static int bma150_probe(struct i2c_client *client,
client->irq, error);
return error;
}
} else {
error = bma150_register_polled_device(bma150);
if (error)
return error;
}
i2c_set_clientdata(client, bma150);
......@@ -585,8 +520,7 @@ static int bma150_remove(struct i2c_client *client)
return 0;
}
#ifdef CONFIG_PM
static int bma150_suspend(struct device *dev)
static int __maybe_unused bma150_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bma150_data *bma150 = i2c_get_clientdata(client);
......@@ -594,14 +528,13 @@ static int bma150_suspend(struct device *dev)
return bma150_set_mode(bma150, BMA150_MODE_SLEEP);
}
static int bma150_resume(struct device *dev)
static int __maybe_unused bma150_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bma150_data *bma150 = i2c_get_clientdata(client);
return bma150_set_mode(bma150, BMA150_MODE_NORMAL);
}
#endif
static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment