ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode

commit 2f38c3c0 upstream.

Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
rx_hdr_status is not padded to align in 4-byte boundary. Define a
new hw_params field to handle different alignment behaviour between
different hw. This patch fixes improper retrieval of rfc1042 header
with QCA4019. This patch along with "ath10k: Properly remove padding
from the start of rx payload" will fix traffic failure in ethernet
decap mode for QCA4019.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/wireless/ath/ath10k/core.c

@@ -67,6 +67,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA988X_BOARD_DATA_SZ,
 			.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -85,6 +86,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -103,6 +105,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -121,6 +124,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -140,6 +144,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA6174_BOARD_DATA_SZ,
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -159,6 +164,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA99X0_BOARD_DATA_SZ,
 			.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 1,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -177,6 +183,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA9377_BOARD_DATA_SZ,
 			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -195,6 +202,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_size = QCA9377_BOARD_DATA_SZ,
 			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
 		},
+		.decap_align_bytes = 4,
 	},
 };
 

drivers/net/wireless/ath/ath10k/core.h

@@ -670,6 +670,10 @@ struct ath10k {
 			size_t board_size;
 			size_t board_ext_size;
 		} fw;
+
+		/* Number of bytes used for alignment in rx_hdr_status */
+		int decap_align_bytes;
+
 	} hw_params;
 
 	const struct firmware *board;