Merge tag 'amlogic-fixes' of...

Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes

Pull "Amlogic fixes for v4.13-rc" from Kevin Hilman:

- 2 minor DT fixes

* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition
  ARM64: dts: meson-gx: use specific compatible for the AO pwms

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -400,7 +400,7 @@ i2c_AO: i2c@500 {
 			};
 
 			pwm_AO_ab: pwm@550 {
-				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 				reg = <0x0 0x00550 0x0 0x10>;
 				#pwm-cells = <3>;
 				status = "disabled";

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

@@ -109,8 +109,8 @@ &pwm_AO_ab {
 	status = "okay";
 	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
+	clocks = <&xtal> , <&xtal>;
+	clock-names = "clkin0", "clkin1" ;
 };
 
 &pwm_ef {

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

@@ -10,12 +10,20 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x-p212.dtsi"
+#include "meson-gxl-s905x.dtsi"
 
 / {
 	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
 	model = "Libre Technology CC";
 
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cvbs-connector {
 		compatible = "composite-video-connector";
 
@@ -26,6 +34,11 @@ cvbs_connector_in: endpoint {
 		};
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -53,6 +66,39 @@ blue {
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cvbs_vdac_port {
@@ -61,6 +107,16 @@ cvbs_vdac_out: endpoint {
 	};
 };
 
+&ethmac {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -73,20 +129,43 @@ hdmi_tx_tmds_out: endpoint {
 	};
 };
 
-/*
- * The following devices exists but are exposed on the general
- * purpose GPIO header. End user may well decide to use those pins
- * for another purpose
- */
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
 
-&sd_emmc_a {
-	status = "disabled";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_card>;
 };
 
-&uart_A {
-	status = "disabled";
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <50000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
 };
 
-&wifi32k {
-	status = "disabled";
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
 };