Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next

Main pull req for 4.2.. I think there will be a secondary pull-req..
I'd like to land the hdcp support patches, since all the review
comments have been long since addressed, and they have been ready to
merge for a couple release cycles now other than the scm dependency
(which should be coming in through arm-soc tree for 4.2). So I am not
including them in this initial pull req to avoid merge ordering
issues.

Main highlights:

1) adreno a306 support (for apq8x16 and upcoming dragonboard 410c)
2) various dsi bits
3) various 64bit fixes (mostly warnings)
4) NV12MT support, pulled in via msm-next rather than drm-misc since
dependency on on regenerated envytools headers (but lgtm'd-by danvet)
5) random fixes and cleanups

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (36 commits)
  drm/msm: restart queued submits after hang
  drm/msm: fix timeout calculation
  drm/msm/hdmi: Use pinctrl in HDMI driver
  drm/msm/hdmi: Point to the right struct device
  drm/msm/mdp: Add support for more 32-bit RGB formats
  drm/msm: use __s32, __s64, __u32 and __u64 from linux/types.h for uabi
  drm/msm/atomic: Clean up planes in the error paths of .atomic_commit()
  drm/msm/mdp5: Always generate active-high sync signals for DSI
  drm/msm: dsi: fix compile errors when CONFIG_GPIOLIB=n
  drm/msm: use devm_gpiod_get_optional for optional reset gpio
  drm/msm/dsi: Separate PHY to another platform device
  drm/msm/dsi: Enable PLL driver in MSM DSI
  drm/msm/dsi: Add DSI PLL clock driver support
  drm/msm: use IS_ERR() to check regulator_get() return
  drm/msm: use IS_ERR() to check msm_ioremap() return
  drm/msm/mdp5: Wait for PP_DONE irq for command mode CRTC atomic commit
  drm/msm: Use customized function to wait for atomic commit done
  dt-bindings: Add MSM eDP controller documentation
  dt-bindings: Add MSM DSI controller documentation
  drm/msm: drop redundant debug output
  ...

Documentation/devicetree/bindings/drm/msm/dsi.txt

+Qualcomm Technologies Inc. adreno/snapdragon DSI output
+
+DSI Controller:
+Required properties:
+- compatible:
+  * "qcom,mdss-dsi-ctrl"
+- reg: Physical base address and length of the registers of controller
+- reg-names: The names of register regions. The following regions are required:
+  * "dsi_ctrl"
+- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
+  be 0 or 1, since we have 2 DSI controllers at most for now.
+- interrupts: The interrupt signal from the DSI block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "bus_clk"
+  * "byte_clk"
+  * "core_clk"
+  * "core_mmss_clk"
+  * "iface_clk"
+  * "mdp_core_clk"
+  * "pixel_clk"
+- vdd-supply: phandle to vdd regulator device node
+- vddio-supply: phandle to vdd-io regulator device node
+- vdda-supply: phandle to vdda regulator device node
+- qcom,dsi-phy: phandle to DSI PHY device node
+
+Optional properties:
+- panel@0: Node of panel connected to this DSI controller.
+  See files in Documentation/devicetree/bindings/panel/ for each supported
+  panel.
+- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is
+  driving a panel which needs 2 DSI links.
+- qcom,master-panel: Boolean value indicating if the DSI controller is driving
+  the master link of the 2-DSI panel.
+- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is
+  driving a 2-DSI panel whose 2 links need receive command simultaneously.
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+  through MDP block
+
+DSI PHY:
+Required properties:
+- compatible: Could be the following
+  * "qcom,dsi-phy-28nm-hpm"
+  * "qcom,dsi-phy-28nm-lp"
+- reg: Physical base address and length of the registers of PLL, PHY and PHY
+  regulator
+- reg-names: The names of register regions. The following regions are required:
+  * "dsi_pll"
+  * "dsi_phy"
+  * "dsi_phy_regulator"
+- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
+  be 0 or 1, since we have 2 DSI PHYs at most for now.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "iface_clk"
+- vddio-supply: phandle to vdd-io regulator device node
+
+Example:
+	mdss_dsi0: qcom,mdss_dsi@fd922800 {
+		compatible = "qcom,mdss-dsi-ctrl";
+		qcom,dsi-host-index = <0>;
+		interrupt-parent = <&mdss_mdp>;
+		interrupts = <4 0>;
+		reg-names = "dsi_ctrl";
+		reg = <0xfd922800 0x200>;
+		power-domains = <&mmcc MDSS_GDSC>;
+		clock-names =
+			"bus_clk",
+			"byte_clk",
+			"core_clk",
+			"core_mmss_clk",
+			"iface_clk",
+			"mdp_core_clk",
+			"pixel_clk";
+		clocks =
+			<&mmcc MDSS_AXI_CLK>,
+			<&mmcc MDSS_BYTE0_CLK>,
+			<&mmcc MDSS_ESC0_CLK>,
+			<&mmcc MMSS_MISC_AHB_CLK>,
+			<&mmcc MDSS_AHB_CLK>,
+			<&mmcc MDSS_MDP_CLK>,
+			<&mmcc MDSS_PCLK0_CLK>;
+		vdda-supply = <&pma8084_l2>;
+		vdd-supply = <&pma8084_l22>;
+		vddio-supply = <&pma8084_l12>;
+
+		qcom,dsi-phy = <&mdss_dsi_phy0>;
+
+		qcom,dual-panel-mode;
+		qcom,master-panel;
+		qcom,sync-dual-panel;
+
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+		};
+	};
+
+	mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 {
+		compatible = "qcom,dsi-phy-28nm-hpm";
+		qcom,dsi-phy-index = <0>;
+		reg-names =
+			"dsi_pll",
+			"dsi_phy",
+			"dsi_phy_regulator";
+		reg =   <0xfd922a00 0xd4>,
+			<0xfd922b00 0x2b0>,
+			<0xfd922d80 0x7b>;
+		clock-names = "iface_clk";
+		clocks = <&mmcc MDSS_AHB_CLK>;
+		vddio-supply = <&pma8084_l12>;
+	};

Documentation/devicetree/bindings/drm/msm/edp.txt

+Qualcomm Technologies Inc. adreno/snapdragon eDP output
+
+Required properties:
+- compatible:
+  * "qcom,mdss-edp"
+- reg: Physical base address and length of the registers of controller and PLL
+- reg-names: The names of register regions. The following regions are required:
+  * "edp"
+  * "pll_base"
+- interrupts: The interrupt signal from the eDP block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "mdp_core_clk"
+  * "pixel_clk"
+  * "link_clk"
+- #clock-cells: The value should be 1.
+- vdda-supply: phandle to vdda regulator device node
+- lvl-vdd-supply: phandle to regulator device node which is used to supply power
+  to HPD receiving chip
+- panel-en-gpios: GPIO pin to supply power to panel.
+- panel-hpd-gpios: GPIO pin used for eDP hpd.
+
+
+Optional properties:
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+  through MDP block
+
+Example:
+	mdss_edp: qcom,mdss_edp@fd923400 {
+			compatible = "qcom,mdss-edp";
+			reg-names =
+				"edp",
+				"pll_base";
+			reg =	<0xfd923400 0x700>,
+				<0xfd923a00 0xd4>;
+			interrupt-parent = <&mdss_mdp>;
+			interrupts = <12 0>;
+			power-domains = <&mmcc MDSS_GDSC>;
+			clock-names =
+				"core_clk",
+				"pixel_clk",
+				"iface_clk",
+				"link_clk",
+				"mdp_core_clk";
+			clocks =
+				<&mmcc MDSS_EDPAUX_CLK>,
+				<&mmcc MDSS_EDPPIXEL_CLK>,
+				<&mmcc MDSS_AHB_CLK>,
+				<&mmcc MDSS_EDPLINK_CLK>,
+				<&mmcc MDSS_MDP_CLK>;
+			#clock-cells = <1>;
+			vdda-supply = <&pma8084_l12>;
+			lvl-vdd-supply = <&lvl_vreg>;
+			panel-en-gpios = <&tlmm 137 0>;
+			panel-hpd-gpios = <&tlmm 103 0>;
+	};

Documentation/devicetree/bindings/drm/msm/hdmi.txt

@@ -20,6 +20,9 @@ Required properties:
 Optional properties:
 - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
 - qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+- pinctrl-names: the pin control state names; should contain "default"
+- pinctrl-0: the default pinctrl state (active)
+- pinctrl-1: the "sleep" pinctrl state
 
 Example:
 
@@ -44,5 +47,8 @@ Example:
 		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
 		core-vdda-supply = <&pm8921_hdmi_mvs>;
 		hdmi-mux-supply = <&ext_3p3v>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
 	};
 };

drivers/gpu/drm/drm_crtc.c

@@ -3255,6 +3255,24 @@ static int framebuffer_check(const struct drm_mode_fb_cmd2 *r)
 				      r->modifier[i], i);
 			return -EINVAL;
 		}
+
+		/* modifier specific checks: */
+		switch (r->modifier[i]) {
+		case DRM_FORMAT_MOD_SAMSUNG_64_32_TILE:
+			/* NOTE: the pitch restriction may be lifted later if it turns
+			 * out that no hw has this restriction:
+			 */
+			if (r->pixel_format != DRM_FORMAT_NV12 ||
+					width % 128 || height % 32 ||
+					r->pitches[i] % 128) {
+				DRM_DEBUG_KMS("bad modifier data for plane %d\n", i);
+				return -EINVAL;
+			}
+			break;
+
+		default:
+			break;
+		}
 	}
 
 	for (i = num_planes; i < 4; i++) {

drivers/gpu/drm/msm/Kconfig

@@ -46,3 +46,10 @@ config DRM_MSM_DSI
 	  Choose this option if you have a need for MIPI DSI connector
 	  support.
 
+config DRM_MSM_DSI_PLL
+	bool "Enable DSI PLL driver in MSM DRM"
+	depends on DRM_MSM_DSI && COMMON_CLK
+	default y
+	help
+	  Choose this option to enable DSI PLL driver which provides DSI
+	  source clocks under common clock framework.

drivers/gpu/drm/msm/Makefile

 ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
+ccflags-$(CONFIG_DRM_MSM_DSI_PLL) += -Idrivers/gpu/drm/msm/dsi
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -50,10 +51,14 @@ msm-y := \
 
 msm-$(CONFIG_DRM_MSM_FBDEV) += msm_fbdev.o
 msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
+
 msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
 			dsi/dsi_host.o \
 			dsi/dsi_manager.o \
 			dsi/dsi_phy.o \
 			mdp/mdp5/mdp5_cmd_encoder.o
 
+msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/pll/dsi_pll.o \
+				dsi/pll/dsi_pll_28nm.o
+
 obj-$(CONFIG_DRM_MSM)	+= msm.o

drivers/gpu/drm/msm/adreno/a2xx.xml.h

@@ -12,9 +12,9 @@ The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml  (   1453 bytes, from 2013-03-31 16:51:27)
 - /home/robclark/src/freedreno/envytools/rnndb/adreno/a2xx.xml          (  32901 bytes, from 2014-06-02 15:21:30)
 - /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_common.xml (  10551 bytes, from 2014-11-13 22:44:30)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  15085 bytes, from 2014-12-20 21:49:41)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  64344 bytes, from 2014-12-12 20:22:26)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  51069 bytes, from 2014-12-21 15:51:54)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  14895 bytes, from 2015-04-19 15:23:28)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  66709 bytes, from 2015-04-12 18:16:35)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  60633 bytes, from 2015-05-20 14:48:19)
 
 Copyright (C) 2013-2014 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)

drivers/gpu/drm/msm/adreno/a3xx_gpu.c

@@ -93,7 +93,10 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
 		/* Set up AOOO: */
 		gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO_EN, 0x0000003c);
 		gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO, 0x003c003c);
-
+	} else if (adreno_is_a306(adreno_gpu)) {
+		gpu_write(gpu, REG_A3XX_VBIF_ROUND_ROBIN_QOS_ARB, 0x0003);
+		gpu_write(gpu, REG_A3XX_VBIF_OUT_RD_LIM_CONF0, 0x0000000a);
+		gpu_write(gpu, REG_A3XX_VBIF_OUT_WR_LIM_CONF0, 0x0000000a);
 	} else if (adreno_is_a320(adreno_gpu)) {
 		/* Set up 16 deep read/write request queues: */
 		gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF0, 0x10101010);
@@ -186,7 +189,9 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
 	gpu_write(gpu, REG_A3XX_UCHE_CACHE_MODE_CONTROL_REG, 0x00000001);
 
 	/* Enable Clock gating: */
-	if (adreno_is_a320(adreno_gpu))
+	if (adreno_is_a306(adreno_gpu))
+		gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xaaaaaaaa);
+	else if (adreno_is_a320(adreno_gpu))
 		gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xbfffffff);
 	else if (adreno_is_a330v2(adreno_gpu))
 		gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xaaaaaaaa);
@@ -271,7 +276,8 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
 		gpu_write(gpu, REG_A3XX_CP_PFP_UCODE_DATA, ptr[i]);
 
 	/* CP ROQ queue sizes (bytes) - RB:16, ST:16, IB1:32, IB2:64 */
-	if (adreno_is_a305(adreno_gpu) || adreno_is_a320(adreno_gpu)) {
+	if (adreno_is_a305(adreno_gpu) || adreno_is_a306(adreno_gpu) ||
+			adreno_is_a320(adreno_gpu)) {
 		gpu_write(gpu, REG_AXXX_CP_QUEUE_THRESHOLDS,
 				AXXX_CP_QUEUE_THRESHOLDS_CSQ_IB1_START(2) |
 				AXXX_CP_QUEUE_THRESHOLDS_CSQ_IB2_START(6) |
@@ -295,9 +301,12 @@ static int a3xx_hw_init(struct msm_gpu *gpu)
 
 static void a3xx_recover(struct msm_gpu *gpu)
 {
+	adreno_dump_info(gpu);
+
 	/* dump registers before resetting gpu, if enabled: */
 	if (hang_debug)
 		a3xx_dump(gpu);
+
 	gpu_write(gpu, REG_A3XX_RBBM_SW_RESET_CMD, 1);
 	gpu_read(gpu, REG_A3XX_RBBM_SW_RESET_CMD);
 	gpu_write(gpu, REG_A3XX_RBBM_SW_RESET_CMD, 0);

drivers/gpu/drm/msm/adreno/a4xx_gpu.c

@@ -268,6 +268,8 @@ static int a4xx_hw_init(struct msm_gpu *gpu)
 
 static void a4xx_recover(struct msm_gpu *gpu)
 {
+	adreno_dump_info(gpu);
+
 	/* dump registers before resetting gpu, if enabled: */
 	if (hang_debug)
 		a4xx_dump(gpu);
@@ -505,7 +507,6 @@ static const unsigned int a4xx_register_offsets[REG_ADRENO_REGISTER_MAX] = {
 
 static void a4xx_dump(struct msm_gpu *gpu)
 {
-	adreno_dump(gpu);
 	printk("status:   %08x\n",
 			gpu_read(gpu, REG_A4XX_RBBM_STATUS));
 	adreno_dump(gpu);

drivers/gpu/drm/msm/adreno/adreno_common.xml.h

@@ -12,9 +12,9 @@ The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml  (   1453 bytes, from 2013-03-31 16:51:27)
 - /home/robclark/src/freedreno/envytools/rnndb/adreno/a2xx.xml          (  32901 bytes, from 2014-06-02 15:21:30)
 - /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_common.xml (  10551 bytes, from 2014-11-13 22:44:30)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  15085 bytes, from 2014-12-20 21:49:41)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  64344 bytes, from 2014-12-12 20:22:26)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  51069 bytes, from 2014-12-21 15:51:54)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  14895 bytes, from 2015-04-19 15:23:28)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  66709 bytes, from 2015-04-12 18:16:35)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  60633 bytes, from 2015-05-20 14:48:19)
 
 Copyright (C) 2013-2014 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)

drivers/gpu/drm/msm/adreno/adreno_device.c

@@ -19,7 +19,7 @@
 
 #include "adreno_gpu.h"
 
-#if defined(CONFIG_MSM_BUS_SCALING) && !defined(CONFIG_OF)
+#if defined(DOWNSTREAM_CONFIG_MSM_BUS_SCALING) && !defined(CONFIG_OF)
 #  include <mach/kgsl.h>
 #endif
 
@@ -41,6 +41,14 @@ static const struct adreno_info gpulist[] = {
 		.pfpfw = "a300_pfp.fw",
 		.gmem  = SZ_256K,
 		.init  = a3xx_gpu_init,
+	}, {
+		.rev   = ADRENO_REV(3, 0, 6, 0),
+		.revn  = 307,        /* because a305c is revn==306 */
+		.name  = "A306",
+		.pm4fw = "a300_pm4.fw",
+		.pfpfw = "a300_pfp.fw",
+		.gmem  = SZ_128K,
+		.init  = a3xx_gpu_init,
 	}, {
 		.rev   = ADRENO_REV(3, 2, ANY_ID, ANY_ID),
 		.revn  = 320,
@@ -240,7 +248,7 @@ static int adreno_bind(struct device *dev, struct device *master, void *data)
 			config.rev = ADRENO_REV(3, 0, 5, 0);
 
 	}
-#  ifdef CONFIG_MSM_BUS_SCALING
+#  ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 	config.bus_scale_table = pdata->bus_scale_table;
 #  endif
 #endif

drivers/gpu/drm/msm/adreno/adreno_gpu.c

@@ -176,6 +176,17 @@ int adreno_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit,
 	OUT_PKT3(ring, CP_INTERRUPT, 1);
 	OUT_RING(ring, 0x80000000);
 
+	/* Workaround for missing irq issue on 8x16/a306.  Unsure if the
+	 * root cause is a platform issue or some a306 quirk, but this
+	 * keeps things humming along:
+	 */
+	if (adreno_is_a306(adreno_gpu)) {
+		OUT_PKT3(ring, CP_WAIT_FOR_IDLE, 1);
+		OUT_RING(ring, 0x00000000);
+		OUT_PKT3(ring, CP_INTERRUPT, 1);
+		OUT_RING(ring, 0x80000000);
+	}
+
 #if 0
 	if (adreno_is_a3xx(adreno_gpu)) {
 		/* Dummy set-constant to trigger context rollover */
@@ -249,8 +260,13 @@ void adreno_show(struct msm_gpu *gpu, struct seq_file *m)
 }
 #endif
 
-/* would be nice to not have to duplicate the _show() stuff with printk(): */
-void adreno_dump(struct msm_gpu *gpu)
+/* Dump common gpu status and scratch registers on any hang, to make
+ * the hangcheck logs more useful.  The scratch registers seem always
+ * safe to read when GPU has hung (unlike some other regs, depending
+ * on how the GPU hung), and they are useful to match up to cmdstream
+ * dumps when debugging hangs:
+ */
+void adreno_dump_info(struct msm_gpu *gpu)
 {
 	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
 	int i;
@@ -266,6 +282,18 @@ void adreno_dump(struct msm_gpu *gpu)
 	printk("wptr:     %d\n", adreno_gpu->memptrs->wptr);
 	printk("rb wptr:  %d\n", get_wptr(gpu->rb));
 
+	for (i = 0; i < 8; i++) {
+		printk("CP_SCRATCH_REG%d: %u\n", i,
+			gpu_read(gpu, REG_AXXX_CP_SCRATCH_REG0 + i));
+	}
+}
+
+/* would be nice to not have to duplicate the _show() stuff with printk(): */
+void adreno_dump(struct msm_gpu *gpu)
+{
+	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+	int i;
+
 	/* dump these out in a form that can be parsed by demsm: */
 	printk("IO:region %s 00000000 00020000\n", gpu->name);
 	for (i = 0; adreno_gpu->registers[i] != ~0; i += 2) {
@@ -317,7 +345,7 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
 	gpu->fast_rate = config->fast_rate;
 	gpu->slow_rate = config->slow_rate;
 	gpu->bus_freq  = config->bus_freq;
-#ifdef CONFIG_MSM_BUS_SCALING
+#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 	gpu->bus_scale_table = config->bus_scale_table;
 #endif
 

drivers/gpu/drm/msm/adreno/adreno_gpu.h

@@ -167,7 +167,7 @@ struct adreno_gpu {
 struct adreno_platform_config {
 	struct adreno_rev rev;
 	uint32_t fast_rate, slow_rate, bus_freq;
-#ifdef CONFIG_MSM_BUS_SCALING
+#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 	struct msm_bus_scale_pdata *bus_scale_table;
 #endif
 };
@@ -197,6 +197,12 @@ static inline bool adreno_is_a305(struct adreno_gpu *gpu)
 	return gpu->revn == 305;
 }
 
+static inline bool adreno_is_a306(struct adreno_gpu *gpu)
+{
+	/* yes, 307, because a305c is 306 */
+	return gpu->revn == 307;
+}
+
 static inline bool adreno_is_a320(struct adreno_gpu *gpu)
 {
 	return gpu->revn == 320;
@@ -233,6 +239,7 @@ void adreno_idle(struct msm_gpu *gpu);
 #ifdef CONFIG_DEBUG_FS
 void adreno_show(struct msm_gpu *gpu, struct seq_file *m);
 #endif
+void adreno_dump_info(struct msm_gpu *gpu);
 void adreno_dump(struct msm_gpu *gpu);
 void adreno_wait_ring(struct msm_gpu *gpu, uint32_t ndwords);
 

drivers/gpu/drm/msm/adreno/adreno_pm4.xml.h

@@ -12,11 +12,11 @@ The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml  (   1453 bytes, from 2013-03-31 16:51:27)
 - /home/robclark/src/freedreno/envytools/rnndb/adreno/a2xx.xml          (  32901 bytes, from 2014-06-02 15:21:30)
 - /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_common.xml (  10551 bytes, from 2014-11-13 22:44:30)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  15085 bytes, from 2014-12-20 21:49:41)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  64344 bytes, from 2014-12-12 20:22:26)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  51069 bytes, from 2014-12-21 15:51:54)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  14895 bytes, from 2015-04-19 15:23:28)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  66709 bytes, from 2015-04-12 18:16:35)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  60633 bytes, from 2015-05-20 14:48:19)
 
-Copyright (C) 2013-2014 by the following authors:
+Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
 
 Permission is hereby granted, free of charge, to any person obtaining
@@ -76,16 +76,11 @@ enum pc_di_primtype {
 	DI_PT_LINELOOP = 7,
 	DI_PT_RECTLIST = 8,
 	DI_PT_POINTLIST_A3XX = 9,
-	DI_PT_QUADLIST = 13,
-	DI_PT_QUADSTRIP = 14,
-	DI_PT_POLYGON = 15,
-	DI_PT_2D_COPY_RECT_LIST_V0 = 16,
-	DI_PT_2D_COPY_RECT_LIST_V1 = 17,
-	DI_PT_2D_COPY_RECT_LIST_V2 = 18,
-	DI_PT_2D_COPY_RECT_LIST_V3 = 19,
-	DI_PT_2D_FILL_RECT_LIST = 20,
-	DI_PT_2D_LINE_STRIP = 21,
-	DI_PT_2D_TRI_STRIP = 22,
+	DI_PT_LINE_ADJ = 10,
+	DI_PT_LINESTRIP_ADJ = 11,
+	DI_PT_TRI_ADJ = 12,
+	DI_PT_TRISTRIP_ADJ = 13,
+	DI_PT_PATCHES = 34,
 };
 
 enum pc_di_src_sel {
@@ -192,6 +187,7 @@ enum adreno_state_block {
 	SB_FRAG_TEX = 2,
 	SB_FRAG_MIPADDR = 3,
 	SB_VERT_SHADER = 4,
+	SB_GEOM_SHADER = 5,
 	SB_FRAG_SHADER = 6,
 };
 
@@ -382,12 +378,19 @@ static inline uint32_t CP_DRAW_INDX_OFFSET_0_SOURCE_SELECT(enum pc_di_src_sel va
 {
 	return ((val) << CP_DRAW_INDX_OFFSET_0_SOURCE_SELECT__SHIFT) & CP_DRAW_INDX_OFFSET_0_SOURCE_SELECT__MASK;
 }
+#define CP_DRAW_INDX_OFFSET_0_TESSELLATE			0x00000100
 #define CP_DRAW_INDX_OFFSET_0_INDEX_SIZE__MASK			0x00000c00
 #define CP_DRAW_INDX_OFFSET_0_INDEX_SIZE__SHIFT			10
 static inline uint32_t CP_DRAW_INDX_OFFSET_0_INDEX_SIZE(enum a4xx_index_size val)
 {
 	return ((val) << CP_DRAW_INDX_OFFSET_0_INDEX_SIZE__SHIFT) & CP_DRAW_INDX_OFFSET_0_INDEX_SIZE__MASK;
 }
+#define CP_DRAW_INDX_OFFSET_0_TESS_MODE__MASK			0x01f00000
+#define CP_DRAW_INDX_OFFSET_0_TESS_MODE__SHIFT			20
+static inline uint32_t CP_DRAW_INDX_OFFSET_0_TESS_MODE(uint32_t val)
+{
+	return ((val) << CP_DRAW_INDX_OFFSET_0_TESS_MODE__SHIFT) & CP_DRAW_INDX_OFFSET_0_TESS_MODE__MASK;
+}
 
 #define REG_CP_DRAW_INDX_OFFSET_1				0x00000001
 #define CP_DRAW_INDX_OFFSET_1_NUM_INSTANCES__MASK		0xffffffff

drivers/gpu/drm/msm/dsi/dsi.c

@@ -23,12 +23,47 @@ struct drm_encoder *msm_dsi_get_encoder(struct msm_dsi *msm_dsi)
 		msm_dsi->encoders[MSM_DSI_CMD_ENCODER_ID];
 }
 
+static int dsi_get_phy(struct msm_dsi *msm_dsi)
+{
+	struct platform_device *pdev = msm_dsi->pdev;
+	struct platform_device *phy_pdev;
+	struct device_node *phy_node;
+
+	phy_node = of_parse_phandle(pdev->dev.of_node, "qcom,dsi-phy", 0);
+	if (!phy_node) {
+		dev_err(&pdev->dev, "cannot find phy device\n");
+		return -ENXIO;
+	}
+
+	phy_pdev = of_find_device_by_node(phy_node);
+	if (phy_pdev)
+		msm_dsi->phy = platform_get_drvdata(phy_pdev);
+
+	of_node_put(phy_node);
+
+	if (!phy_pdev || !msm_dsi->phy) {
+		dev_err(&pdev->dev, "%s: phy driver is not ready\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	msm_dsi->phy_dev = get_device(&phy_pdev->dev);
+
+	return 0;
+}
+
 static void dsi_destroy(struct msm_dsi *msm_dsi)
 {
 	if (!msm_dsi)
 		return;
 
 	msm_dsi_manager_unregister(msm_dsi);
+
+	if (msm_dsi->phy_dev) {
+		put_device(msm_dsi->phy_dev);
+		msm_dsi->phy = NULL;
+		msm_dsi->phy_dev = NULL;
+	}
+
 	if (msm_dsi->host) {
 		msm_dsi_host_destroy(msm_dsi->host);
 		msm_dsi->host = NULL;
@@ -43,7 +78,6 @@ static struct msm_dsi *dsi_init(struct platform_device *pdev)
 	int ret;
 
 	if (!pdev) {
-		dev_err(&pdev->dev, "no dsi device\n");
 		ret = -ENXIO;
 		goto fail;
 	}
@@ -63,6 +97,11 @@ static struct msm_dsi *dsi_init(struct platform_device *pdev)
 	if (ret)
 		goto fail;
 
+	/* GET dsi PHY */
+	ret = dsi_get_phy(msm_dsi);
+	if (ret)
+		goto fail;
+
 	/* Register to dsi manager */
 	ret = msm_dsi_manager_register(msm_dsi);
 	if (ret)
@@ -142,12 +181,14 @@ static struct platform_driver dsi_driver = {
 void __init msm_dsi_register(void)
 {
 	DBG("");
+	msm_dsi_phy_driver_register();
 	platform_driver_register(&dsi_driver);
 }
 
 void __exit msm_dsi_unregister(void)
 {
 	DBG("");
+	msm_dsi_phy_driver_unregister();
 	platform_driver_unregister(&dsi_driver);
 }
 

drivers/gpu/drm/msm/dsi/dsi.h

@@ -14,6 +14,7 @@
 #ifndef __DSI_CONNECTOR_H__
 #define __DSI_CONNECTOR_H__
 
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 
 #include "drm_crtc.h"
@@ -38,6 +39,28 @@
 #define DSI_ENCODER_MASTER	DSI_1
 #define DSI_ENCODER_SLAVE	DSI_0
 
+enum msm_dsi_phy_type {
+	MSM_DSI_PHY_28NM_HPM,
+	MSM_DSI_PHY_28NM_LP,
+	MSM_DSI_PHY_MAX
+};
+
+#define DSI_DEV_REGULATOR_MAX	8
+
+/* Regulators for DSI devices */
+struct dsi_reg_entry {
+	char name[32];
+	int min_voltage;
+	int max_voltage;
+	int enable_load;
+	int disable_load;
+};
+
+struct dsi_reg_config {
+	int num;
+	struct dsi_reg_entry regs[DSI_DEV_REGULATOR_MAX];
+};
+
 struct msm_dsi {
 	struct drm_device *dev;
 	struct platform_device *pdev;
@@ -49,6 +72,8 @@ struct msm_dsi {
 	struct msm_dsi_phy *phy;
 	struct drm_panel *panel;
 	unsigned long panel_flags;
+
+	struct device *phy_dev;
 	bool phy_enabled;
 
 	/* the encoders we are hooked to (outside of dsi block) */
@@ -73,6 +98,29 @@ void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi);
 /* msm dsi */
 struct drm_encoder *msm_dsi_get_encoder(struct msm_dsi *msm_dsi);
 
+/* dsi pll */
+struct msm_dsi_pll;
+#ifdef CONFIG_DRM_MSM_DSI_PLL
+struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
+			enum msm_dsi_phy_type type, int dsi_id);
+void msm_dsi_pll_destroy(struct msm_dsi_pll *pll);
+int msm_dsi_pll_get_clk_provider(struct msm_dsi_pll *pll,
+	struct clk **byte_clk_provider, struct clk **pixel_clk_provider);
+#else
+static inline struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
+			 enum msm_dsi_phy_type type, int id) {
+	return ERR_PTR(-ENODEV);
+}
+static inline void msm_dsi_pll_destroy(struct msm_dsi_pll *pll)
+{
+}
+static inline int msm_dsi_pll_get_clk_provider(struct msm_dsi_pll *pll,
+	struct clk **byte_clk_provider, struct clk **pixel_clk_provider)
+{
+	return -ENODEV;
+}
+#endif
+
 /* dsi host */
 int msm_dsi_host_xfer_prepare(struct mipi_dsi_host *host,
 					const struct mipi_dsi_msg *msg);
@@ -94,6 +142,8 @@ struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host,
 					unsigned long *panel_flags);
 int msm_dsi_host_register(struct mipi_dsi_host *host, bool check_defer);
 void msm_dsi_host_unregister(struct mipi_dsi_host *host);
+int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
+			struct msm_dsi_pll *src_pll);
 void msm_dsi_host_destroy(struct mipi_dsi_host *host);
 int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 					struct drm_device *dev);
@@ -101,17 +151,14 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi);
 
 /* dsi phy */
 struct msm_dsi_phy;
-enum msm_dsi_phy_type {
-	MSM_DSI_PHY_UNKNOWN,
-	MSM_DSI_PHY_28NM,
-	MSM_DSI_PHY_MAX
-};
-struct msm_dsi_phy *msm_dsi_phy_init(struct platform_device *pdev,
-			enum msm_dsi_phy_type type, int id);
+void msm_dsi_phy_driver_register(void);
+void msm_dsi_phy_driver_unregister(void);
 int msm_dsi_phy_enable(struct msm_dsi_phy *phy, bool is_dual_panel,
 	const unsigned long bit_rate, const unsigned long esc_rate);
 int msm_dsi_phy_disable(struct msm_dsi_phy *phy);
 void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
 					u32 *clk_pre, u32 *clk_post);
+struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy);
+
 #endif /* __DSI_CONNECTOR_H__ */
 

drivers/gpu/drm/msm/dsi/dsi.xml.h

@@ -8,8 +8,17 @@ This file was generated by the rules-ng-ng headergen tool in this git repository
 git clone https://github.com/freedreno/envytools.git
 
 The rules-ng-ng source files this header was generated from are:
-- /usr2/hali/local/envytools/envytools/rnndb/dsi/dsi.xml             (  18681 bytes, from 2015-03-04 23:08:31)
-- /usr2/hali/local/envytools/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2015-01-28 21:43:22)
+- /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
+- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
 Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
@@ -394,6 +403,9 @@ static inline uint32_t DSI_CLKOUT_TIMING_CTRL_T_CLK_POST(uint32_t val)
 #define DSI_EOT_PACKET_CTRL_TX_EOT_APPEND			0x00000001
 #define DSI_EOT_PACKET_CTRL_RX_EOT_IGNORE			0x00000010
 
+#define REG_DSI_LANE_CTRL					0x000000a8
+#define DSI_LANE_CTRL_CLKLN_HS_FORCE_REQUEST			0x10000000
+
 #define REG_DSI_LANE_SWAP_CTRL					0x000000ac
 #define DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL__MASK			0x00000007
 #define DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL__SHIFT			0
@@ -835,5 +847,152 @@ static inline uint32_t DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)
 
 #define REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG			0x00000018
 
+#define REG_DSI_28nm_PHY_PLL_REFCLK_CFG				0x00000000
+#define DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR			0x00000001
+
+#define REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG			0x00000004
+
+#define REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG			0x00000008
+
+#define REG_DSI_28nm_PHY_PLL_VCOLPF_CFG				0x0000000c
+
+#define REG_DSI_28nm_PHY_PLL_VREG_CFG				0x00000010
+#define DSI_28nm_PHY_PLL_VREG_CFG_POSTDIV1_BYPASS_B		0x00000002
+
+#define REG_DSI_28nm_PHY_PLL_PWRGEN_CFG				0x00000014
+
+#define REG_DSI_28nm_PHY_PLL_DMUX_CFG				0x00000018
+
+#define REG_DSI_28nm_PHY_PLL_AMUX_CFG				0x0000001c
+
+#define REG_DSI_28nm_PHY_PLL_GLB_CFG				0x00000020
+#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B			0x00000001
+#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B		0x00000002
+#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B		0x00000004
+#define DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE			0x00000008
+
+#define REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG			0x00000024
+
+#define REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG			0x00000028
+
+#define REG_DSI_28nm_PHY_PLL_LPFR_CFG				0x0000002c
+
+#define REG_DSI_28nm_PHY_PLL_LPFC1_CFG				0x00000030
+
+#define REG_DSI_28nm_PHY_PLL_LPFC2_CFG				0x00000034
+
+#define REG_DSI_28nm_PHY_PLL_SDM_CFG0				0x00000038
+#define DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__MASK			0x0000003f
+#define DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__SHIFT		0
+static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(uint32_t val)
+{
+	return ((val) << DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV__MASK;
+}
+#define DSI_28nm_PHY_PLL_SDM_CFG0_BYP				0x00000040
+
+#define REG_DSI_28nm_PHY_PLL_SDM_CFG1				0x0000003c
+#define DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK		0x0000003f
+#define DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__SHIFT		0
+static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(uint32_t val)
+{
+	return ((val) << DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK;
+}
+#define DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__MASK		0x00000040
+#define DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__SHIFT		6
+static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN(uint32_t val)
+{
+	return ((val) << DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG1_DITHER_EN__MASK;
+}
+
+#define REG_DSI_28nm_PHY_PLL_SDM_CFG2				0x00000040
+#define DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__MASK		0x000000ff
+#define DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__SHIFT		0
+static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(uint32_t val)
+{
+	return ((val) << DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0__MASK;
+}
+
+#define REG_DSI_28nm_PHY_PLL_SDM_CFG3				0x00000044
+#define DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__MASK		0x000000ff
+#define DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__SHIFT		0
+static inline uint32_t DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(uint32_t val)
+{
+	return ((val) << DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__SHIFT) & DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8__MASK;
+}
+
+#define REG_DSI_28nm_PHY_PLL_SDM_CFG4				0x00000048
+
+#define REG_DSI_28nm_PHY_PLL_SSC_CFG0				0x0000004c
+
+#define REG_DSI_28nm_PHY_PLL_SSC_CFG1				0x00000050
+
+#define REG_DSI_28nm_PHY_PLL_SSC_CFG2				0x00000054
+
+#define REG_DSI_28nm_PHY_PLL_SSC_CFG3				0x00000058
+
+#define REG_DSI_28nm_PHY_PLL_LKDET_CFG0				0x0000005c
+
+#define REG_DSI_28nm_PHY_PLL_LKDET_CFG1				0x00000060
+
+#define REG_DSI_28nm_PHY_PLL_LKDET_CFG2				0x00000064
+
+#define REG_DSI_28nm_PHY_PLL_TEST_CFG				0x00000068
+#define DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET			0x00000001
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG0				0x0000006c
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG1				0x00000070
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG2				0x00000074
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG3				0x00000078
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG4				0x0000007c
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG5				0x00000080
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG6				0x00000084
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG7				0x00000088
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG8				0x0000008c
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG9				0x00000090
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG10				0x00000094
+
+#define REG_DSI_28nm_PHY_PLL_CAL_CFG11				0x00000098
+
+#define REG_DSI_28nm_PHY_PLL_EFUSE_CFG				0x0000009c
+
+#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS_SEL			0x000000a0
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_42				0x000000a4
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_43				0x000000a8
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_44				0x000000ac
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_45				0x000000b0
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_46				0x000000b4
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_47				0x000000b8
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_48				0x000000bc
+
+#define REG_DSI_28nm_PHY_PLL_STATUS				0x000000c0
+#define DSI_28nm_PHY_PLL_STATUS_PLL_RDY				0x00000001
+
+#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS0				0x000000c4
+
+#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS1				0x000000c8
+
+#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS2				0x000000cc
+
+#define REG_DSI_28nm_PHY_PLL_DEBUG_BUS3				0x000000d0
+
+#define REG_DSI_28nm_PHY_PLL_CTRL_54				0x000000d4
+
 
 #endif /* DSI_XML */

drivers/gpu/drm/msm/dsi/dsi_host.c

@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
@@ -36,35 +37,19 @@
 
 #define DSI_6G_REG_SHIFT	4
 
-#define DSI_REGULATOR_MAX	8
-struct dsi_reg_entry {
-	char name[32];
-	int min_voltage;
-	int max_voltage;
-	int enable_load;
-	int disable_load;
-};
-
-struct dsi_reg_config {
-	int num;
-	struct dsi_reg_entry regs[DSI_REGULATOR_MAX];
-};
-
 struct dsi_config {
 	u32 major;
 	u32 minor;
 	u32 io_offset;
-	enum msm_dsi_phy_type phy_type;
 	struct dsi_reg_config reg_cfg;
 };
 
 static const struct dsi_config dsi_cfgs[] = {
-	{MSM_DSI_VER_MAJOR_V2, 0, 0, MSM_DSI_PHY_UNKNOWN},
+	{MSM_DSI_VER_MAJOR_V2, 0, 0, {0,} },
 	{ /* 8974 v1 */
 		.major = MSM_DSI_VER_MAJOR_6G,
 		.minor = MSM_DSI_6G_VER_MINOR_V1_0,
 		.io_offset = DSI_6G_REG_SHIFT,
-		.phy_type = MSM_DSI_PHY_28NM,
 		.reg_cfg = {
 			.num = 4,
 			.regs = {
@@ -79,7 +64,6 @@ static const struct dsi_config dsi_cfgs[] = {
 		.major = MSM_DSI_VER_MAJOR_6G,
 		.minor = MSM_DSI_6G_VER_MINOR_V1_1,
 		.io_offset = DSI_6G_REG_SHIFT,
-		.phy_type = MSM_DSI_PHY_28NM,
 		.reg_cfg = {
 			.num = 4,
 			.regs = {
@@ -94,7 +78,6 @@ static const struct dsi_config dsi_cfgs[] = {
 		.major = MSM_DSI_VER_MAJOR_6G,
 		.minor = MSM_DSI_6G_VER_MINOR_V1_1_1,
 		.io_offset = DSI_6G_REG_SHIFT,
-		.phy_type = MSM_DSI_PHY_28NM,
 		.reg_cfg = {
 			.num = 4,
 			.regs = {
@@ -109,7 +92,6 @@ static const struct dsi_config dsi_cfgs[] = {
 		.major = MSM_DSI_VER_MAJOR_6G,
 		.minor = MSM_DSI_6G_VER_MINOR_V1_2,
 		.io_offset = DSI_6G_REG_SHIFT,
-		.phy_type = MSM_DSI_PHY_28NM,
 		.reg_cfg = {
 			.num = 4,
 			.regs = {
@@ -124,7 +106,6 @@ static const struct dsi_config dsi_cfgs[] = {
 		.major = MSM_DSI_VER_MAJOR_6G,
 		.minor = MSM_DSI_6G_VER_MINOR_V1_3_1,
 		.io_offset = DSI_6G_REG_SHIFT,
-		.phy_type = MSM_DSI_PHY_28NM,
 		.reg_cfg = {
 			.num = 4,
 			.regs = {
@@ -197,7 +178,7 @@ struct msm_dsi_host {
 	int id;
 
 	void __iomem *ctrl_base;
-	struct regulator_bulk_data supplies[DSI_REGULATOR_MAX];
+	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
 	struct clk *mdp_core_clk;
 	struct clk *ahb_clk;
 	struct clk *axi_clk;
@@ -205,6 +186,9 @@ struct msm_dsi_host {
 	struct clk *byte_clk;
 	struct clk *esc_clk;
 	struct clk *pixel_clk;
+	struct clk *byte_clk_src;
+	struct clk *pixel_clk_src;
+
 	u32 byte_clk_rate;
 
 	struct gpio_desc *disp_en_gpio;
@@ -273,7 +257,7 @@ static const struct dsi_config *dsi_get_config(struct msm_dsi_host *msm_host)
 	u32 major = 0, minor = 0;
 
 	gdsc_reg = regulator_get(&msm_host->pdev->dev, "gdsc");
-	if (IS_ERR_OR_NULL(gdsc_reg)) {
+	if (IS_ERR(gdsc_reg)) {
 		pr_err("%s: cannot get gdsc\n", __func__);
 		goto fail;
 	}
@@ -463,6 +447,22 @@ static int dsi_clk_init(struct msm_dsi_host *msm_host)
 		goto exit;
 	}
 
+	msm_host->byte_clk_src = devm_clk_get(dev, "byte_clk_src");
+	if (IS_ERR(msm_host->byte_clk_src)) {
+		ret = PTR_ERR(msm_host->byte_clk_src);
+		pr_err("%s: can't find byte_clk_src. ret=%d\n", __func__, ret);
+		msm_host->byte_clk_src = NULL;
+		goto exit;
+	}
+
+	msm_host->pixel_clk_src = devm_clk_get(dev, "pixel_clk_src");
+	if (IS_ERR(msm_host->pixel_clk_src)) {
+		ret = PTR_ERR(msm_host->pixel_clk_src);
+		pr_err("%s: can't find pixel_clk_src. ret=%d\n", __func__, ret);
+		msm_host->pixel_clk_src = NULL;
+		goto exit;
+	}
+
 exit:
 	return ret;
 }
@@ -787,6 +787,11 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
 		dsi_write(msm_host, REG_DSI_LANE_SWAP_CTRL,
 			DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(LANE_SWAP_0123));
 	}
+
+	if (!(flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
+		dsi_write(msm_host, REG_DSI_LANE_CTRL,
+			DSI_LANE_CTRL_CLKLN_HS_FORCE_REQUEST);
+
 	data |= DSI_CTRL_ENABLE;
 
 	dsi_write(msm_host, REG_DSI_CTRL, data);
@@ -1345,36 +1350,19 @@ static irqreturn_t dsi_host_irq(int irq, void *ptr)
 static int dsi_host_init_panel_gpios(struct msm_dsi_host *msm_host,
 			struct device *panel_device)
 {
-	int ret;
-
-	msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
-						"disp-enable");
+	msm_host->disp_en_gpio = devm_gpiod_get_optional(panel_device,
+							 "disp-enable",
+							 GPIOD_OUT_LOW);
 	if (IS_ERR(msm_host->disp_en_gpio)) {
 		DBG("cannot get disp-enable-gpios %ld",
 				PTR_ERR(msm_host->disp_en_gpio));
-		msm_host->disp_en_gpio = NULL;
-	}
-	if (msm_host->disp_en_gpio) {
-		ret = gpiod_direction_output(msm_host->disp_en_gpio, 0);
-		if (ret) {
-			pr_err("cannot set dir to disp-en-gpios %d\n", ret);
-			return ret;
-		}
+		return PTR_ERR(msm_host->disp_en_gpio);
 	}
 
-	msm_host->te_gpio = devm_gpiod_get(panel_device, "disp-te");
+	msm_host->te_gpio = devm_gpiod_get(panel_device, "disp-te", GPIOD_IN);
 	if (IS_ERR(msm_host->te_gpio)) {
 		DBG("cannot get disp-te-gpios %ld", PTR_ERR(msm_host->te_gpio));
-		msm_host->te_gpio = NULL;
-	}
-
-	if (msm_host->te_gpio) {
-		ret = gpiod_direction_input(msm_host->te_gpio);
-		if (ret) {
-			pr_err("%s: cannot set dir to disp-te-gpios, %d\n",
-				__func__, ret);
-			return ret;
-		}
+		return PTR_ERR(msm_host->te_gpio);
 	}
 
 	return 0;
@@ -1508,13 +1496,6 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 	msm_host->workqueue = alloc_ordered_workqueue("dsi_drm_work", 0);
 	INIT_WORK(&msm_host->err_work, dsi_err_worker);
 
-	msm_dsi->phy = msm_dsi_phy_init(pdev, msm_host->cfg->phy_type,
-					msm_host->id);
-	if (!msm_dsi->phy) {
-		ret = -EINVAL;
-		pr_err("%s: phy init failed\n", __func__);
-		goto fail;
-	}
 	msm_dsi->host = &msm_host->base;
 	msm_dsi->id = msm_host->id;
 
@@ -1824,6 +1805,39 @@ void msm_dsi_host_cmd_xfer_commit(struct mipi_dsi_host *host, u32 iova, u32 len)
 	wmb();
 }
 
+int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
+	struct msm_dsi_pll *src_pll)
+{
+	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
+	struct clk *byte_clk_provider, *pixel_clk_provider;
+	int ret;
+
+	ret = msm_dsi_pll_get_clk_provider(src_pll,
+				&byte_clk_provider, &pixel_clk_provider);
+	if (ret) {
+		pr_info("%s: can't get provider from pll, don't set parent\n",
+			__func__);
+		return 0;
+	}
+
+	ret = clk_set_parent(msm_host->byte_clk_src, byte_clk_provider);
+	if (ret) {
+		pr_err("%s: can't set parent to byte_clk_src. ret=%d\n",
+			__func__, ret);
+		goto exit;
+	}
+
+	ret = clk_set_parent(msm_host->pixel_clk_src, pixel_clk_provider);
+	if (ret) {
+		pr_err("%s: can't set parent to pixel_clk_src. ret=%d\n",
+			__func__, ret);
+		goto exit;
+	}
+
+exit:
+	return ret;
+}
+
 int msm_dsi_host_enable(struct mipi_dsi_host *host)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);

drivers/gpu/drm/msm/dsi/dsi_manager.c

@@ -60,6 +60,53 @@ static int dsi_mgr_parse_dual_panel(struct device_node *np, int id)
 	return 0;
 }
 
+static int dsi_mgr_host_register(int id)
+{
+	struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id);
+	struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id);
+	struct msm_dsi *clk_master_dsi = dsi_mgr_get_dsi(DSI_CLOCK_MASTER);
+	struct msm_dsi_pll *src_pll;
+	int ret;
+
+	if (!IS_DUAL_PANEL()) {
+		ret = msm_dsi_host_register(msm_dsi->host, true);
+		if (ret)
+			return ret;
+
+		src_pll = msm_dsi_phy_get_pll(msm_dsi->phy);
+		ret = msm_dsi_host_set_src_pll(msm_dsi->host, src_pll);
+	} else if (!other_dsi) {
+		ret = 0;
+	} else {
+		struct msm_dsi *mdsi = IS_MASTER_PANEL(id) ?
+					msm_dsi : other_dsi;
+		struct msm_dsi *sdsi = IS_MASTER_PANEL(id) ?
+					other_dsi : msm_dsi;
+		/* Register slave host first, so that slave DSI device
+		 * has a chance to probe, and do not block the master
+		 * DSI device's probe.
+		 * Also, do not check defer for the slave host,
+		 * because only master DSI device adds the panel to global
+		 * panel list. The panel's device is the master DSI device.
+		 */
+		ret = msm_dsi_host_register(sdsi->host, false);
+		if (ret)
+			return ret;
+		ret = msm_dsi_host_register(mdsi->host, true);
+		if (ret)
+			return ret;
+
+		/* PLL0 is to drive both 2 DSI link clocks in Dual DSI mode. */
+		src_pll = msm_dsi_phy_get_pll(clk_master_dsi->phy);
+		ret = msm_dsi_host_set_src_pll(msm_dsi->host, src_pll);
+		if (ret)
+			return ret;
+		ret = msm_dsi_host_set_src_pll(other_dsi->host, src_pll);
+	}
+
+	return ret;
+}
+
 struct dsi_connector {
 	struct drm_connector base;
 	int id;
@@ -652,7 +699,6 @@ int msm_dsi_manager_register(struct msm_dsi *msm_dsi)
 {
 	struct msm_dsi_manager *msm_dsim = &msm_dsim_glb;
 	int id = msm_dsi->id;
-	struct msm_dsi *other_dsi = dsi_mgr_get_other_dsi(id);
 	int ret;
 
 	if (id > DSI_MAX) {
@@ -670,31 +716,20 @@ int msm_dsi_manager_register(struct msm_dsi *msm_dsi)
 	ret = dsi_mgr_parse_dual_panel(msm_dsi->pdev->dev.of_node, id);
 	if (ret) {
 		pr_err("%s: failed to parse dual panel info\n", __func__);
-		return ret;
+		goto fail;
 	}
 
-	if (!IS_DUAL_PANEL()) {
-		ret = msm_dsi_host_register(msm_dsi->host, true);
-	} else if (!other_dsi) {
-		return 0;
-	} else {
-		struct msm_dsi *mdsi = IS_MASTER_PANEL(id) ?
-					msm_dsi : other_dsi;
-		struct msm_dsi *sdsi = IS_MASTER_PANEL(id) ?
-					other_dsi : msm_dsi;
-		/* Register slave host first, so that slave DSI device
-		 * has a chance to probe, and do not block the master
-		 * DSI device's probe.
-		 * Also, do not check defer for the slave host,
-		 * because only master DSI device adds the panel to global
-		 * panel list. The panel's device is the master DSI device.
-		 */
-		ret = msm_dsi_host_register(sdsi->host, false);
-		if (ret)
-			return ret;
-		ret = msm_dsi_host_register(mdsi->host, true);
+	ret = dsi_mgr_host_register(id);
+	if (ret) {
+		pr_err("%s: failed to register mipi dsi host for DSI %d\n",
+			__func__, id);
+		goto fail;
 	}
 
+	return 0;
+
+fail:
+	msm_dsim->dsi[id] = NULL;
 	return ret;
 }
 

drivers/gpu/drm/msm/dsi/dsi_phy.c

@@ -11,12 +11,27 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
 #include "dsi.h"
 #include "dsi.xml.h"
 
 #define dsi_phy_read(offset) msm_readl((offset))
 #define dsi_phy_write(offset, data) msm_writel((data), (offset))
 
+struct dsi_phy_ops {
+	int (*enable)(struct msm_dsi_phy *phy, bool is_dual_panel,
+		const unsigned long bit_rate, const unsigned long esc_rate);
+	int (*disable)(struct msm_dsi_phy *phy);
+};
+
+struct dsi_phy_cfg {
+	enum msm_dsi_phy_type type;
+	struct dsi_reg_config reg_cfg;
+	struct dsi_phy_ops ops;
+};
+
 struct dsi_dphy_timing {
 	u32 clk_pre;
 	u32 clk_post;
@@ -34,15 +49,106 @@ struct dsi_dphy_timing {
 };
 
 struct msm_dsi_phy {
+	struct platform_device *pdev;
 	void __iomem *base;
 	void __iomem *reg_base;
 	int id;
+
+	struct clk *ahb_clk;
+	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
+
 	struct dsi_dphy_timing timing;
-	int (*enable)(struct msm_dsi_phy *phy, bool is_dual_panel,
-		const unsigned long bit_rate, const unsigned long esc_rate);
-	int (*disable)(struct msm_dsi_phy *phy);
+	const struct dsi_phy_cfg *cfg;
+
+	struct msm_dsi_pll *pll;
 };
 
+static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	struct device *dev = &phy->pdev->dev;
+	int num = phy->cfg->reg_cfg.num;
+	int i, ret;
+
+	for (i = 0; i < num; i++)
+		s[i].supply = regs[i].name;
+
+	ret = devm_regulator_bulk_get(&phy->pdev->dev, num, s);
+	if (ret < 0) {
+		dev_err(dev, "%s: failed to init regulator, ret=%d\n",
+						__func__, ret);
+		return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		if ((regs[i].min_voltage >= 0) && (regs[i].max_voltage >= 0)) {
+			ret = regulator_set_voltage(s[i].consumer,
+				regs[i].min_voltage, regs[i].max_voltage);
+			if (ret < 0) {
+				dev_err(dev,
+					"regulator %d set voltage failed, %d\n",
+					i, ret);
+				return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	int num = phy->cfg->reg_cfg.num;
+	int i;
+
+	DBG("");
+	for (i = num - 1; i >= 0; i--)
+		if (regs[i].disable_load >= 0)
+			regulator_set_load(s[i].consumer,
+						regs[i].disable_load);
+
+	regulator_bulk_disable(num, s);
+}
+
+static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	struct device *dev = &phy->pdev->dev;
+	int num = phy->cfg->reg_cfg.num;
+	int ret, i;
+
+	DBG("");
+	for (i = 0; i < num; i++) {
+		if (regs[i].enable_load >= 0) {
+			ret = regulator_set_load(s[i].consumer,
+							regs[i].enable_load);
+			if (ret < 0) {
+				dev_err(dev,
+					"regulator %d set op mode failed, %d\n",
+					i, ret);
+				goto fail;
+			}
+		}
+	}
+
+	ret = regulator_bulk_enable(num, s);
+	if (ret < 0) {
+		dev_err(dev, "regulator enable failed, %d\n", ret);
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	for (i--; i >= 0; i--)
+		regulator_set_load(s[i].consumer, regs[i].disable_load);
+	return ret;
+}
+
 #define S_DIV_ROUND_UP(n, d)	\
 	(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
 
@@ -284,59 +390,200 @@ static int dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
 	return 0;
 }
 
-#define dsi_phy_func_init(name)	\
-	do {	\
-		phy->enable = dsi_##name##_phy_enable;	\
-		phy->disable = dsi_##name##_phy_disable;	\
-	} while (0)
+static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
+{
+	int ret;
+
+	pm_runtime_get_sync(&phy->pdev->dev);
+
+	ret = clk_prepare_enable(phy->ahb_clk);
+	if (ret) {
+		pr_err("%s: can't enable ahb clk, %d\n", __func__, ret);
+		pm_runtime_put_sync(&phy->pdev->dev);
+	}
+
+	return ret;
+}
 
-struct msm_dsi_phy *msm_dsi_phy_init(struct platform_device *pdev,
-			enum msm_dsi_phy_type type, int id)
+static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
+{
+	clk_disable_unprepare(phy->ahb_clk);
+	pm_runtime_put_sync(&phy->pdev->dev);
+}
+
+static const struct dsi_phy_cfg dsi_phy_cfgs[MSM_DSI_PHY_MAX] = {
+	[MSM_DSI_PHY_28NM_HPM] = {
+		.type = MSM_DSI_PHY_28NM_HPM,
+		.reg_cfg = {
+			.num = 1,
+			.regs = {
+				{"vddio", 1800000, 1800000, 100000, 100},
+			},
+		},
+		.ops = {
+			.enable = dsi_28nm_phy_enable,
+			.disable = dsi_28nm_phy_disable,
+		}
+	},
+	[MSM_DSI_PHY_28NM_LP] = {
+		.type = MSM_DSI_PHY_28NM_LP,
+		.reg_cfg = {
+			.num = 1,
+			.regs = {
+				{"vddio", 1800000, 1800000, 100000, 100},
+			},
+		},
+		.ops = {
+			.enable = dsi_28nm_phy_enable,
+			.disable = dsi_28nm_phy_disable,
+		}
+	},
+};
+
+static const struct of_device_id dsi_phy_dt_match[] = {
+	{ .compatible = "qcom,dsi-phy-28nm-hpm",
+	  .data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_HPM],},
+	{ .compatible = "qcom,dsi-phy-28nm-lp",
+	  .data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_LP],},
+	{}
+};
+
+static int dsi_phy_driver_probe(struct platform_device *pdev)
 {
 	struct msm_dsi_phy *phy;
+	const struct of_device_id *match;
+	int ret;
 
 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
-		return NULL;
+		return -ENOMEM;
+
+	match = of_match_node(dsi_phy_dt_match, pdev->dev.of_node);
+	if (!match)
+		return -ENODEV;
+
+	phy->cfg = match->data;
+	phy->pdev = pdev;
+
+	ret = of_property_read_u32(pdev->dev.of_node,
+				"qcom,dsi-phy-index", &phy->id);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"%s: PHY index not specified, ret=%d\n",
+			__func__, ret);
+		goto fail;
+	}
 
 	phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
-	if (IS_ERR_OR_NULL(phy->base)) {
-		pr_err("%s: failed to map phy base\n", __func__);
-		return NULL;
+	if (IS_ERR(phy->base)) {
+		dev_err(&pdev->dev, "%s: failed to map phy base\n", __func__);
+		ret = -ENOMEM;
+		goto fail;
 	}
 	phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator", "DSI_PHY_REG");
-	if (IS_ERR_OR_NULL(phy->reg_base)) {
-		pr_err("%s: failed to map phy regulator base\n", __func__);
-		return NULL;
+	if (IS_ERR(phy->reg_base)) {
+		dev_err(&pdev->dev,
+			"%s: failed to map phy regulator base\n", __func__);
+		ret = -ENOMEM;
+		goto fail;
 	}
 
-	switch (type) {
-	case MSM_DSI_PHY_28NM:
-		dsi_phy_func_init(28nm);
-		break;
-	default:
-		pr_err("%s: unsupported type, %d\n", __func__, type);
-		return NULL;
+	ret = dsi_phy_regulator_init(phy);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: failed to init regulator\n", __func__);
+		goto fail;
+	}
+
+	phy->ahb_clk = devm_clk_get(&pdev->dev, "iface_clk");
+	if (IS_ERR(phy->ahb_clk)) {
+		pr_err("%s: Unable to get ahb clk\n", __func__);
+		ret = PTR_ERR(phy->ahb_clk);
+		goto fail;
+	}
+
+	/* PLL init will call into clk_register which requires
+	 * register access, so we need to enable power and ahb clock.
+	 */
+	ret = dsi_phy_enable_resource(phy);
+	if (ret)
+		goto fail;
+
+	phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
+	if (!phy->pll)
+		dev_info(&pdev->dev,
+			"%s: pll init failed, need separate pll clk driver\n",
+			__func__);
+
+	dsi_phy_disable_resource(phy);
+
+	platform_set_drvdata(pdev, phy);
+
+	return 0;
+
+fail:
+	return ret;
+}
+
+static int dsi_phy_driver_remove(struct platform_device *pdev)
+{
+	struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
+
+	if (phy && phy->pll) {
+		msm_dsi_pll_destroy(phy->pll);
+		phy->pll = NULL;
 	}
 
-	phy->id = id;
+	platform_set_drvdata(pdev, NULL);
 
-	return phy;
+	return 0;
+}
+
+static struct platform_driver dsi_phy_platform_driver = {
+	.probe      = dsi_phy_driver_probe,
+	.remove     = dsi_phy_driver_remove,
+	.driver     = {
+		.name   = "msm_dsi_phy",
+		.of_match_table = dsi_phy_dt_match,
+	},
+};
+
+void __init msm_dsi_phy_driver_register(void)
+{
+	platform_driver_register(&dsi_phy_platform_driver);
+}
+
+void __exit msm_dsi_phy_driver_unregister(void)
+{
+	platform_driver_unregister(&dsi_phy_platform_driver);
 }
 
 int msm_dsi_phy_enable(struct msm_dsi_phy *phy, bool is_dual_panel,
 	const unsigned long bit_rate, const unsigned long esc_rate)
 {
-	if (!phy || !phy->enable)
+	int ret;
+
+	if (!phy || !phy->cfg->ops.enable)
 		return -EINVAL;
-	return phy->enable(phy, is_dual_panel, bit_rate, esc_rate);
+
+	ret = dsi_phy_regulator_enable(phy);
+	if (ret) {
+		dev_err(&phy->pdev->dev, "%s: regulator enable failed, %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	return phy->cfg->ops.enable(phy, is_dual_panel, bit_rate, esc_rate);
 }
 
 int msm_dsi_phy_disable(struct msm_dsi_phy *phy)
 {
-	if (!phy || !phy->disable)
+	if (!phy || !phy->cfg->ops.disable)
 		return -EINVAL;
-	return phy->disable(phy);
+
+	phy->cfg->ops.disable(phy);
+	dsi_phy_regulator_disable(phy);
+
+	return 0;
 }
 
 void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
@@ -350,3 +597,11 @@ void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
 		*clk_post = phy->timing.clk_post;
 }
 
+struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
+{
+	if (!phy)
+		return NULL;
+
+	return phy->pll;
+}
+

drivers/gpu/drm/msm/dsi/mmss_cc.xml.h

@@ -10,15 +10,15 @@ git clone https://github.com/freedreno/envytools.git
 The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20908 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2357 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  27208 bytes, from 2015-01-13 23:56:11)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  11712 bytes, from 2013-08-17 17:13:43)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
 - /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  26848 bytes, from 2015-01-13 23:55:57)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (   8253 bytes, from 2014-12-08 16:13:00)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
 Copyright (C) 2013-2014 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)

drivers/gpu/drm/msm/dsi/pll/dsi_pll.c

+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_pll.h"
+
+static int dsi_pll_enable(struct msm_dsi_pll *pll)
+{
+	int i, ret = 0;
+
+	/*
+	 * Certain PLLs do not allow VCO rate update when it is on.
+	 * Keep track of their status to turn on/off after set rate success.
+	 */
+	if (unlikely(pll->pll_on))
+		return 0;
+
+	/* Try all enable sequences until one succeeds */
+	for (i = 0; i < pll->en_seq_cnt; i++) {
+		ret = pll->enable_seqs[i](pll);
+		DBG("DSI PLL %s after sequence #%d",
+			ret ? "unlocked" : "locked", i + 1);
+		if (!ret)
+			break;
+	}
+
+	if (ret) {
+		DRM_ERROR("DSI PLL failed to lock\n");
+		return ret;
+	}
+
+	pll->pll_on = true;
+
+	return 0;
+}
+
+static void dsi_pll_disable(struct msm_dsi_pll *pll)
+{
+	if (unlikely(!pll->pll_on))
+		return;
+
+	pll->disable_seq(pll);
+
+	pll->pll_on = false;
+}
+
+/*
+ * DSI PLL Helper functions
+ */
+long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
+		unsigned long rate, unsigned long *parent_rate)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+
+	if      (rate < pll->min_rate)
+		return  pll->min_rate;
+	else if (rate > pll->max_rate)
+		return  pll->max_rate;
+	else
+		return rate;
+}
+
+int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+	int ret;
+
+	/*
+	 * Certain PLLs need to update the same VCO rate and registers
+	 * after resume in suspend/resume scenario.
+	 */
+	if (pll->restore_state) {
+		ret = pll->restore_state(pll);
+		if (ret)
+			goto error;
+	}
+
+	ret = dsi_pll_enable(pll);
+
+error:
+	return ret;
+}
+
+void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw)
+{
+	struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+
+	if (pll->save_state)
+		pll->save_state(pll);
+
+	dsi_pll_disable(pll);
+}
+
+void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev,
+					struct clk **clks, u32 num_clks)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+
+	if (!num_clks || !clks)
+		return;
+
+	do {
+		clk_unregister(clks[--num_clks]);
+		clks[num_clks] = NULL;
+	} while (num_clks);
+}
+
+/*
+ * DSI PLL API
+ */
+int msm_dsi_pll_get_clk_provider(struct msm_dsi_pll *pll,
+	struct clk **byte_clk_provider, struct clk **pixel_clk_provider)
+{
+	if (pll->get_provider)
+		return pll->get_provider(pll,
+					byte_clk_provider,
+					pixel_clk_provider);
+
+	return -EINVAL;
+}
+
+void msm_dsi_pll_destroy(struct msm_dsi_pll *pll)
+{
+	if (pll->destroy)
+		pll->destroy(pll);
+}
+
+struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
+			enum msm_dsi_phy_type type, int id)
+{
+	struct device *dev = &pdev->dev;
+	struct msm_dsi_pll *pll;
+
+	switch (type) {
+	case MSM_DSI_PHY_28NM_HPM:
+	case MSM_DSI_PHY_28NM_LP:
+		pll = msm_dsi_pll_28nm_init(pdev, type, id);
+		break;
+	default:
+		pll = ERR_PTR(-ENXIO);
+		break;
+	}
+
+	if (IS_ERR(pll)) {
+		dev_err(dev, "%s: failed to init DSI PLL\n", __func__);
+		return NULL;
+	}
+
+	pll->type = type;
+
+	DBG("DSI:%d PLL registered", id);
+
+	return pll;
+}
+

drivers/gpu/drm/msm/dsi/pll/dsi_pll.h

+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DSI_PLL_H__
+#define __DSI_PLL_H__
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#include "dsi.h"
+
+#define NUM_DSI_CLOCKS_MAX	6
+#define MAX_DSI_PLL_EN_SEQS	10
+
+struct msm_dsi_pll {
+	enum msm_dsi_phy_type type;
+
+	struct clk_hw	clk_hw;
+	bool		pll_on;
+
+	unsigned long	min_rate;
+	unsigned long	max_rate;
+	u32		en_seq_cnt;
+
+	int (*enable_seqs[MAX_DSI_PLL_EN_SEQS])(struct msm_dsi_pll *pll);
+	void (*disable_seq)(struct msm_dsi_pll *pll);
+	int (*get_provider)(struct msm_dsi_pll *pll,
+			struct clk **byte_clk_provider,
+			struct clk **pixel_clk_provider);
+	void (*destroy)(struct msm_dsi_pll *pll);
+	void (*save_state)(struct msm_dsi_pll *pll);
+	int (*restore_state)(struct msm_dsi_pll *pll);
+};
+
+#define hw_clk_to_pll(x) container_of(x, struct msm_dsi_pll, clk_hw)
+
+static inline void pll_write(void __iomem *reg, u32 data)
+{
+	msm_writel(data, reg);
+}
+
+static inline u32 pll_read(const void __iomem *reg)
+{
+	return msm_readl(reg);
+}
+
+static inline void pll_write_udelay(void __iomem *reg, u32 data, u32 delay_us)
+{
+	pll_write(reg, data);
+	udelay(delay_us);
+}
+
+static inline void pll_write_ndelay(void __iomem *reg, u32 data, u32 delay_ns)
+{
+	pll_write((reg), data);
+	ndelay(delay_ns);
+}
+
+/*
+ * DSI PLL Helper functions
+ */
+
+/* clock callbacks */
+long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
+		unsigned long rate, unsigned long *parent_rate);
+int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw);
+void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw);
+/* misc */
+void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev,
+					struct clk **clks, u32 num_clks);
+
+/*
+ * Initialization for Each PLL Type
+ */
+struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev,
+					enum msm_dsi_phy_type type, int id);
+
+#endif /* __DSI_PLL_H__ */
+

drivers/gpu/drm/msm/dsi/sfpb.xml.h

@@ -10,15 +10,15 @@ git clone https://github.com/freedreno/envytools.git
 The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20908 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2357 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  27208 bytes, from 2015-01-13 23:56:11)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  11712 bytes, from 2013-08-17 17:13:43)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
 - /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  26848 bytes, from 2015-01-13 23:55:57)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (   8253 bytes, from 2014-12-08 16:13:00)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
 Copyright (C) 2013 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)

drivers/gpu/drm/msm/edp/edp.xml.h

@@ -10,17 +10,17 @@ git clone https://github.com/freedreno/envytools.git
 The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20908 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2357 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  27208 bytes, from 2015-01-13 23:56:11)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  11712 bytes, from 2013-08-17 17:13:43)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
 - /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  26848 bytes, from 2015-01-13 23:55:57)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (   8253 bytes, from 2014-12-08 16:13:00)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
-Copyright (C) 2013-2014 by the following authors:
+Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
 
 Permission is hereby granted, free of charge, to any person obtaining
@@ -288,5 +288,92 @@ static inline uint32_t REG_EDP_PHY_LN_PD_CTL(uint32_t i0) { return 0x00000404 +
 
 #define REG_EDP_PHY_GLB_PHY_STATUS				0x00000598
 
+#define REG_EDP_28nm_PHY_PLL_REFCLK_CFG				0x00000000
+
+#define REG_EDP_28nm_PHY_PLL_POSTDIV1_CFG			0x00000004
+
+#define REG_EDP_28nm_PHY_PLL_CHGPUMP_CFG			0x00000008
+
+#define REG_EDP_28nm_PHY_PLL_VCOLPF_CFG				0x0000000c
+
+#define REG_EDP_28nm_PHY_PLL_VREG_CFG				0x00000010
+
+#define REG_EDP_28nm_PHY_PLL_PWRGEN_CFG				0x00000014
+
+#define REG_EDP_28nm_PHY_PLL_DMUX_CFG				0x00000018
+
+#define REG_EDP_28nm_PHY_PLL_AMUX_CFG				0x0000001c
+
+#define REG_EDP_28nm_PHY_PLL_GLB_CFG				0x00000020
+#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B			0x00000001
+#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B		0x00000002
+#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B		0x00000004
+#define EDP_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE			0x00000008
+
+#define REG_EDP_28nm_PHY_PLL_POSTDIV2_CFG			0x00000024
+
+#define REG_EDP_28nm_PHY_PLL_POSTDIV3_CFG			0x00000028
+
+#define REG_EDP_28nm_PHY_PLL_LPFR_CFG				0x0000002c
+
+#define REG_EDP_28nm_PHY_PLL_LPFC1_CFG				0x00000030
+
+#define REG_EDP_28nm_PHY_PLL_LPFC2_CFG				0x00000034
+
+#define REG_EDP_28nm_PHY_PLL_SDM_CFG0				0x00000038
+
+#define REG_EDP_28nm_PHY_PLL_SDM_CFG1				0x0000003c
+
+#define REG_EDP_28nm_PHY_PLL_SDM_CFG2				0x00000040
+
+#define REG_EDP_28nm_PHY_PLL_SDM_CFG3				0x00000044
+
+#define REG_EDP_28nm_PHY_PLL_SDM_CFG4				0x00000048
+
+#define REG_EDP_28nm_PHY_PLL_SSC_CFG0				0x0000004c
+
+#define REG_EDP_28nm_PHY_PLL_SSC_CFG1				0x00000050
+
+#define REG_EDP_28nm_PHY_PLL_SSC_CFG2				0x00000054
+
+#define REG_EDP_28nm_PHY_PLL_SSC_CFG3				0x00000058
+
+#define REG_EDP_28nm_PHY_PLL_LKDET_CFG0				0x0000005c
+
+#define REG_EDP_28nm_PHY_PLL_LKDET_CFG1				0x00000060
+
+#define REG_EDP_28nm_PHY_PLL_LKDET_CFG2				0x00000064
+
+#define REG_EDP_28nm_PHY_PLL_TEST_CFG				0x00000068
+#define EDP_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET			0x00000001
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG0				0x0000006c
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG1				0x00000070
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG2				0x00000074
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG3				0x00000078
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG4				0x0000007c
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG5				0x00000080
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG6				0x00000084
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG7				0x00000088
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG8				0x0000008c
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG9				0x00000090
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG10				0x00000094
+
+#define REG_EDP_28nm_PHY_PLL_CAL_CFG11				0x00000098
+
+#define REG_EDP_28nm_PHY_PLL_EFUSE_CFG				0x0000009c
+
+#define REG_EDP_28nm_PHY_PLL_DEBUG_BUS_SEL			0x000000a0
+
 
 #endif /* EDP_XML */

drivers/gpu/drm/msm/edp/edp_aux.c

@@ -115,10 +115,12 @@ static int edp_msg_fifo_rx(struct edp_aux *aux, struct drm_dp_aux_msg *msg)
  * msm_edp_aux_ctrl() running concurrently in other threads, i.e.
  * start transaction only when AUX channel is fully enabled.
  */
-ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg)
+static ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux,
+		struct drm_dp_aux_msg *msg)
 {
 	struct edp_aux *aux = to_edp_aux(drm_aux);
 	ssize_t ret;
+	unsigned long time_left;
 	bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
 	bool read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
 
@@ -147,15 +149,17 @@ ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg)
 		goto unlock_exit;
 
 	DBG("wait_for_completion");
-	ret = wait_for_completion_timeout(&aux->msg_comp, 300);
-	if (ret <= 0) {
+	time_left = wait_for_completion_timeout(&aux->msg_comp,
+						msecs_to_jiffies(300));
+	if (!time_left) {
 		/*
 		 * Clear GO and reset AUX channel
 		 * to cancel the current transaction.
 		 */
 		edp_write(aux->base + REG_EDP_AUX_TRANS_CTRL, 0);
 		msm_edp_aux_ctrl(aux, 1);
-		pr_err("%s: aux timeout, %zd\n", __func__, ret);
+		pr_err("%s: aux timeout,\n", __func__);
+		ret = -ETIMEDOUT;
 		goto unlock_exit;
 	}
 	DBG("completion");

drivers/gpu/drm/msm/edp/edp_ctrl.c

@@ -1018,7 +1018,7 @@ static void edp_ctrl_off_worker(struct work_struct *work)
 {
 	struct edp_ctrl *ctrl = container_of(
 				work, struct edp_ctrl, off_work);
-	int ret;
+	unsigned long time_left;
 
 	mutex_lock(&ctrl->dev_mutex);
 
@@ -1030,11 +1030,10 @@ static void edp_ctrl_off_worker(struct work_struct *work)
 	reinit_completion(&ctrl->idle_comp);
 	edp_state_ctrl(ctrl, EDP_STATE_CTRL_PUSH_IDLE);
 
-	ret = wait_for_completion_timeout(&ctrl->idle_comp,
+	time_left = wait_for_completion_timeout(&ctrl->idle_comp,
 						msecs_to_jiffies(500));
-	if (ret <= 0)
-		DBG("%s: idle pattern timedout, %d\n",
-				__func__, ret);
+	if (!time_left)
+		DBG("%s: idle pattern timedout\n", __func__);
 
 	edp_state_ctrl(ctrl, 0);
 

drivers/gpu/drm/msm/hdmi/hdmi.xml.h

@@ -10,15 +10,15 @@ git clone https://github.com/freedreno/envytools.git
 The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20908 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2357 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  27208 bytes, from 2015-01-13 23:56:11)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  11712 bytes, from 2013-08-17 17:13:43)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
 - /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  26848 bytes, from 2015-01-13 23:55:57)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (   8253 bytes, from 2014-12-08 16:13:00)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
 Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
@@ -750,5 +750,92 @@ static inline uint32_t HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(uint32_t val)
 
 #define REG_HDMI_8x74_BIST_PATN3				0x00000048
 
+#define REG_HDMI_28nm_PHY_PLL_REFCLK_CFG			0x00000000
+
+#define REG_HDMI_28nm_PHY_PLL_POSTDIV1_CFG			0x00000004
+
+#define REG_HDMI_28nm_PHY_PLL_CHGPUMP_CFG			0x00000008
+
+#define REG_HDMI_28nm_PHY_PLL_VCOLPF_CFG			0x0000000c
+
+#define REG_HDMI_28nm_PHY_PLL_VREG_CFG				0x00000010
+
+#define REG_HDMI_28nm_PHY_PLL_PWRGEN_CFG			0x00000014
+
+#define REG_HDMI_28nm_PHY_PLL_DMUX_CFG				0x00000018
+
+#define REG_HDMI_28nm_PHY_PLL_AMUX_CFG				0x0000001c
+
+#define REG_HDMI_28nm_PHY_PLL_GLB_CFG				0x00000020
+#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B			0x00000001
+#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B		0x00000002
+#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B		0x00000004
+#define HDMI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE			0x00000008
+
+#define REG_HDMI_28nm_PHY_PLL_POSTDIV2_CFG			0x00000024
+
+#define REG_HDMI_28nm_PHY_PLL_POSTDIV3_CFG			0x00000028
+
+#define REG_HDMI_28nm_PHY_PLL_LPFR_CFG				0x0000002c
+
+#define REG_HDMI_28nm_PHY_PLL_LPFC1_CFG				0x00000030
+
+#define REG_HDMI_28nm_PHY_PLL_LPFC2_CFG				0x00000034
+
+#define REG_HDMI_28nm_PHY_PLL_SDM_CFG0				0x00000038
+
+#define REG_HDMI_28nm_PHY_PLL_SDM_CFG1				0x0000003c
+
+#define REG_HDMI_28nm_PHY_PLL_SDM_CFG2				0x00000040
+
+#define REG_HDMI_28nm_PHY_PLL_SDM_CFG3				0x00000044
+
+#define REG_HDMI_28nm_PHY_PLL_SDM_CFG4				0x00000048
+
+#define REG_HDMI_28nm_PHY_PLL_SSC_CFG0				0x0000004c
+
+#define REG_HDMI_28nm_PHY_PLL_SSC_CFG1				0x00000050
+
+#define REG_HDMI_28nm_PHY_PLL_SSC_CFG2				0x00000054
+
+#define REG_HDMI_28nm_PHY_PLL_SSC_CFG3				0x00000058
+
+#define REG_HDMI_28nm_PHY_PLL_LKDET_CFG0			0x0000005c
+
+#define REG_HDMI_28nm_PHY_PLL_LKDET_CFG1			0x00000060
+
+#define REG_HDMI_28nm_PHY_PLL_LKDET_CFG2			0x00000064
+
+#define REG_HDMI_28nm_PHY_PLL_TEST_CFG				0x00000068
+#define HDMI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET			0x00000001
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG0				0x0000006c
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG1				0x00000070
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG2				0x00000074
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG3				0x00000078
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG4				0x0000007c
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG5				0x00000080
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG6				0x00000084
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG7				0x00000088
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG8				0x0000008c
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG9				0x00000090
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG10				0x00000094
+
+#define REG_HDMI_28nm_PHY_PLL_CAL_CFG11				0x00000098
+
+#define REG_HDMI_28nm_PHY_PLL_EFUSE_CFG				0x0000009c
+
+#define REG_HDMI_28nm_PHY_PLL_DEBUG_BUS_SEL			0x000000a0
+
 
 #endif /* HDMI_XML */

drivers/gpu/drm/msm/hdmi/hdmi_connector.c

@@ -16,6 +16,7 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "msm_kms.h"
 #include "hdmi.h"
@@ -29,14 +30,14 @@ struct hdmi_connector {
 
 static int gpio_config(struct hdmi *hdmi, bool on)
 {
-	struct drm_device *dev = hdmi->dev;
+	struct device *dev = &hdmi->pdev->dev;
 	const struct hdmi_platform_config *config = hdmi->config;
 	int ret;
 
 	if (on) {
 		ret = gpio_request(config->ddc_clk_gpio, "HDMI_DDC_CLK");
 		if (ret) {
-			dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
+			dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
 				"HDMI_DDC_CLK", config->ddc_clk_gpio, ret);
 			goto error1;
 		}
@@ -44,7 +45,7 @@ static int gpio_config(struct hdmi *hdmi, bool on)
 
 		ret = gpio_request(config->ddc_data_gpio, "HDMI_DDC_DATA");
 		if (ret) {
-			dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
+			dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
 				"HDMI_DDC_DATA", config->ddc_data_gpio, ret);
 			goto error2;
 		}
@@ -52,7 +53,7 @@ static int gpio_config(struct hdmi *hdmi, bool on)
 
 		ret = gpio_request(config->hpd_gpio, "HDMI_HPD");
 		if (ret) {
-			dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
+			dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
 				"HDMI_HPD", config->hpd_gpio, ret);
 			goto error3;
 		}
@@ -62,7 +63,7 @@ static int gpio_config(struct hdmi *hdmi, bool on)
 		if (config->mux_en_gpio != -1) {
 			ret = gpio_request(config->mux_en_gpio, "HDMI_MUX_EN");
 			if (ret) {
-				dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
+				dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
 					"HDMI_MUX_EN", config->mux_en_gpio, ret);
 				goto error4;
 			}
@@ -72,7 +73,7 @@ static int gpio_config(struct hdmi *hdmi, bool on)
 		if (config->mux_sel_gpio != -1) {
 			ret = gpio_request(config->mux_sel_gpio, "HDMI_MUX_SEL");
 			if (ret) {
-				dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
+				dev_err(dev, "'%s'(%d) gpio_request failed: %d\n",
 					"HDMI_MUX_SEL", config->mux_sel_gpio, ret);
 				goto error5;
 			}
@@ -83,7 +84,7 @@ static int gpio_config(struct hdmi *hdmi, bool on)
 			ret = gpio_request(config->mux_lpm_gpio,
 					"HDMI_MUX_LPM");
 			if (ret) {
-				dev_err(dev->dev,
+				dev_err(dev,
 					"'%s'(%d) gpio_request failed: %d\n",
 					"HDMI_MUX_LPM",
 					config->mux_lpm_gpio, ret);
@@ -136,7 +137,7 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector)
 {
 	struct hdmi *hdmi = hdmi_connector->hdmi;
 	const struct hdmi_platform_config *config = hdmi->config;
-	struct drm_device *dev = hdmi_connector->base.dev;
+	struct device *dev = &hdmi->pdev->dev;
 	struct hdmi_phy *phy = hdmi->phy;
 	uint32_t hpd_ctrl;
 	int i, ret;
@@ -144,15 +145,21 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector)
 	for (i = 0; i < config->hpd_reg_cnt; i++) {
 		ret = regulator_enable(hdmi->hpd_regs[i]);
 		if (ret) {
-			dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n",
+			dev_err(dev, "failed to enable hpd regulator: %s (%d)\n",
 					config->hpd_reg_names[i], ret);
 			goto fail;
 		}
 	}
 
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret) {
+		dev_err(dev, "pinctrl state chg failed: %d\n", ret);
+		goto fail;
+	}
+
 	ret = gpio_config(hdmi, true);
 	if (ret) {
-		dev_err(dev->dev, "failed to configure GPIOs: %d\n", ret);
+		dev_err(dev, "failed to configure GPIOs: %d\n", ret);
 		goto fail;
 	}
 
@@ -161,13 +168,13 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector)
 			ret = clk_set_rate(hdmi->hpd_clks[i],
 					config->hpd_freq[i]);
 			if (ret)
-				dev_warn(dev->dev, "failed to set clk %s (%d)\n",
+				dev_warn(dev, "failed to set clk %s (%d)\n",
 						config->hpd_clk_names[i], ret);
 		}
 
 		ret = clk_prepare_enable(hdmi->hpd_clks[i]);
 		if (ret) {
-			dev_err(dev->dev, "failed to enable hpd clk: %s (%d)\n",
+			dev_err(dev, "failed to enable hpd clk: %s (%d)\n",
 					config->hpd_clk_names[i], ret);
 			goto fail;
 		}
@@ -204,7 +211,7 @@ static void hdp_disable(struct hdmi_connector *hdmi_connector)
 {
 	struct hdmi *hdmi = hdmi_connector->hdmi;
 	const struct hdmi_platform_config *config = hdmi->config;
-	struct drm_device *dev = hdmi_connector->base.dev;
+	struct device *dev = &hdmi->pdev->dev;
 	int i, ret = 0;
 
 	/* Disable HPD interrupt */
@@ -217,12 +224,16 @@ static void hdp_disable(struct hdmi_connector *hdmi_connector)
 
 	ret = gpio_config(hdmi, false);
 	if (ret)
-		dev_warn(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
+		dev_warn(dev, "failed to unconfigure GPIOs: %d\n", ret);
+
+	ret = pinctrl_pm_select_sleep_state(dev);
+	if (ret)
+		dev_warn(dev, "pinctrl state chg failed: %d\n", ret);
 
 	for (i = 0; i < config->hpd_reg_cnt; i++) {
 		ret = regulator_disable(hdmi->hpd_regs[i]);
 		if (ret)
-			dev_warn(dev->dev, "failed to disable hpd regulator: %s (%d)\n",
+			dev_warn(dev, "failed to disable hpd regulator: %s (%d)\n",
 					config->hpd_reg_names[i], ret);
 	}
 }
@@ -433,7 +444,7 @@ struct drm_connector *hdmi_connector_init(struct hdmi *hdmi)
 
 	ret = hpd_enable(hdmi_connector);
 	if (ret) {
-		dev_err(hdmi->dev->dev, "failed to enable HPD: %d\n", ret);
+		dev_err(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
 		goto fail;
 	}
 

drivers/gpu/drm/msm/hdmi/qfprom.xml.h

@@ -10,15 +10,15 @@ git clone https://github.com/freedreno/envytools.git
 The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20908 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2357 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  27208 bytes, from 2015-01-13 23:56:11)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  11712 bytes, from 2013-08-17 17:13:43)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
 - /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  26848 bytes, from 2015-01-13 23:55:57)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (   8253 bytes, from 2014-12-08 16:13:00)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
 Copyright (C) 2013 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)

drivers/gpu/drm/msm/mdp/mdp4/mdp4.xml.h

@@ -10,17 +10,17 @@ git clone https://github.com/freedreno/envytools.git
 The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20908 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2357 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  27208 bytes, from 2015-01-13 23:56:11)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  11712 bytes, from 2013-08-17 17:13:43)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
 - /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  26848 bytes, from 2015-01-13 23:55:57)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (   8253 bytes, from 2014-12-08 16:13:00)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
-Copyright (C) 2013-2014 by the following authors:
+Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
 
 Permission is hereby granted, free of charge, to any person obtaining
@@ -680,18 +680,18 @@ static inline uint32_t MDP4_PIPE_SRC_STRIDE_B_P3(uint32_t val)
 	return ((val) << MDP4_PIPE_SRC_STRIDE_B_P3__SHIFT) & MDP4_PIPE_SRC_STRIDE_B_P3__MASK;
 }
 
-static inline uint32_t REG_MDP4_PIPE_FRAME_SIZE(enum mdp4_pipe i0) { return 0x00020048 + 0x10000*i0; }
-#define MDP4_PIPE_FRAME_SIZE_HEIGHT__MASK			0xffff0000
-#define MDP4_PIPE_FRAME_SIZE_HEIGHT__SHIFT			16
-static inline uint32_t MDP4_PIPE_FRAME_SIZE_HEIGHT(uint32_t val)
+static inline uint32_t REG_MDP4_PIPE_SSTILE_FRAME_SIZE(enum mdp4_pipe i0) { return 0x00020048 + 0x10000*i0; }
+#define MDP4_PIPE_SSTILE_FRAME_SIZE_HEIGHT__MASK		0xffff0000
+#define MDP4_PIPE_SSTILE_FRAME_SIZE_HEIGHT__SHIFT		16
+static inline uint32_t MDP4_PIPE_SSTILE_FRAME_SIZE_HEIGHT(uint32_t val)
 {
-	return ((val) << MDP4_PIPE_FRAME_SIZE_HEIGHT__SHIFT) & MDP4_PIPE_FRAME_SIZE_HEIGHT__MASK;
+	return ((val) << MDP4_PIPE_SSTILE_FRAME_SIZE_HEIGHT__SHIFT) & MDP4_PIPE_SSTILE_FRAME_SIZE_HEIGHT__MASK;
 }
-#define MDP4_PIPE_FRAME_SIZE_WIDTH__MASK			0x0000ffff
-#define MDP4_PIPE_FRAME_SIZE_WIDTH__SHIFT			0
-static inline uint32_t MDP4_PIPE_FRAME_SIZE_WIDTH(uint32_t val)
+#define MDP4_PIPE_SSTILE_FRAME_SIZE_WIDTH__MASK			0x0000ffff
+#define MDP4_PIPE_SSTILE_FRAME_SIZE_WIDTH__SHIFT		0
+static inline uint32_t MDP4_PIPE_SSTILE_FRAME_SIZE_WIDTH(uint32_t val)
 {
-	return ((val) << MDP4_PIPE_FRAME_SIZE_WIDTH__SHIFT) & MDP4_PIPE_FRAME_SIZE_WIDTH__MASK;
+	return ((val) << MDP4_PIPE_SSTILE_FRAME_SIZE_WIDTH__SHIFT) & MDP4_PIPE_SSTILE_FRAME_SIZE_WIDTH__MASK;
 }
 
 static inline uint32_t REG_MDP4_PIPE_SRC_FORMAT(enum mdp4_pipe i0) { return 0x00020050 + 0x10000*i0; }

drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c

@@ -51,6 +51,11 @@ struct mdp4_crtc {
 	/* if there is a pending flip, these will be non-null: */
 	struct drm_pending_vblank_event *event;
 
+	/* Bits have been flushed at the last commit,
+	 * used to decide if a vsync has happened since last commit.
+	 */
+	u32 flushed_mask;
+
 #define PENDING_CURSOR 0x1
 #define PENDING_FLIP   0x2
 	atomic_t pending;
@@ -93,6 +98,8 @@ static void crtc_flush(struct drm_crtc *crtc)
 
 	DBG("%s: flush=%08x", mdp4_crtc->name, flush);
 
+	mdp4_crtc->flushed_mask = flush;
+
 	mdp4_write(mdp4_kms, REG_MDP4_OVERLAY_FLUSH, flush);
 }
 
@@ -537,6 +544,29 @@ static void mdp4_crtc_err_irq(struct mdp_irq *irq, uint32_t irqstatus)
 	crtc_flush(crtc);
 }
 
+static void mdp4_crtc_wait_for_flush_done(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+	struct mdp4_kms *mdp4_kms = get_kms(crtc);
+	int ret;
+
+	ret = drm_crtc_vblank_get(crtc);
+	if (ret)
+		return;
+
+	ret = wait_event_timeout(dev->vblank[drm_crtc_index(crtc)].queue,
+		!(mdp4_read(mdp4_kms, REG_MDP4_OVERLAY_FLUSH) &
+			mdp4_crtc->flushed_mask),
+		msecs_to_jiffies(50));
+	if (ret <= 0)
+		dev_warn(dev->dev, "vblank time out, crtc=%d\n", mdp4_crtc->id);
+
+	mdp4_crtc->flushed_mask = 0;
+
+	drm_crtc_vblank_put(crtc);
+}
+
 uint32_t mdp4_crtc_vblank(struct drm_crtc *crtc)
 {
 	struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
@@ -600,6 +630,15 @@ void mdp4_crtc_set_intf(struct drm_crtc *crtc, enum mdp4_intf intf, int mixer)
 	mdp4_write(mdp4_kms, REG_MDP4_DISP_INTF_SEL, intf_sel);
 }
 
+void mdp4_crtc_wait_for_commit_done(struct drm_crtc *crtc)
+{
+	/* wait_for_flush_done is the only case for now.
+	 * Later we will have command mode CRTC to wait for
+	 * other event.
+	 */
+	mdp4_crtc_wait_for_flush_done(crtc);
+}
+
 static const char *dma_names[] = {
 		"DMA_P", "DMA_S", "DMA_E",
 };

drivers/gpu/drm/msm/mdp/mdp4/mdp4_dtv_encoder.c

@@ -38,7 +38,7 @@ static struct mdp4_kms *get_kms(struct drm_encoder *encoder)
 	return to_mdp4_kms(to_mdp_kms(priv->kms));
 }
 
-#ifdef CONFIG_MSM_BUS_SCALING
+#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 #include <mach/board.h>
 /* not ironically named at all.. no, really.. */
 static void bs_init(struct mdp4_dtv_encoder *mdp4_dtv_encoder)

drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.c

@@ -119,6 +119,8 @@ static int mdp4_hw_init(struct msm_kms *kms)
 	if (mdp4_kms->rev > 1)
 		mdp4_write(mdp4_kms, REG_MDP4_RESET_STATUS, 1);
 
+	dev->mode_config.allow_fb_modifiers = true;
+
 out:
 	pm_runtime_put_sync(dev->dev);
 
@@ -157,6 +159,12 @@ static void mdp4_complete_commit(struct msm_kms *kms, struct drm_atomic_state *s
 	mdp4_disable(mdp4_kms);
 }
 
+static void mdp4_wait_for_crtc_commit_done(struct msm_kms *kms,
+						struct drm_crtc *crtc)
+{
+	mdp4_crtc_wait_for_commit_done(crtc);
+}
+
 static long mdp4_round_pixclk(struct msm_kms *kms, unsigned long rate,
 		struct drm_encoder *encoder)
 {
@@ -195,6 +203,7 @@ static const struct mdp_kms_funcs kms_funcs = {
 		.disable_vblank  = mdp4_disable_vblank,
 		.prepare_commit  = mdp4_prepare_commit,
 		.complete_commit = mdp4_complete_commit,
+		.wait_for_crtc_commit_done = mdp4_wait_for_crtc_commit_done,
 		.get_format      = mdp_get_format,
 		.round_pixclk    = mdp4_round_pixclk,
 		.preclose        = mdp4_preclose,

drivers/gpu/drm/msm/mdp/mdp4/mdp4_kms.h

@@ -206,6 +206,7 @@ uint32_t mdp4_crtc_vblank(struct drm_crtc *crtc);
 void mdp4_crtc_cancel_pending_flip(struct drm_crtc *crtc, struct drm_file *file);
 void mdp4_crtc_set_config(struct drm_crtc *crtc, uint32_t config);
 void mdp4_crtc_set_intf(struct drm_crtc *crtc, enum mdp4_intf intf, int mixer);
+void mdp4_crtc_wait_for_commit_done(struct drm_crtc *crtc);
 struct drm_crtc *mdp4_crtc_init(struct drm_device *dev,
 		struct drm_plane *plane, int id, int ovlp_id,
 		enum mdp4_dma dma_id);
@@ -229,7 +230,7 @@ static inline struct clk *mpd4_lvds_pll_init(struct drm_device *dev)
 }
 #endif
 
-#ifdef CONFIG_MSM_BUS_SCALING
+#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 static inline int match_dev_name(struct device *dev, void *data)
 {
 	return !strcmp(dev_name(dev), data);

drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c

@@ -38,7 +38,7 @@ static struct mdp4_kms *get_kms(struct drm_encoder *encoder)
 	return to_mdp4_kms(to_mdp_kms(priv->kms));
 }
 
-#ifdef CONFIG_MSM_BUS_SCALING
+#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 #include <mach/board.h>
 static void bs_init(struct mdp4_lcdc_encoder *mdp4_lcdc_encoder)
 {

drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c

@@ -33,6 +33,21 @@ struct mdp4_plane {
 };
 #define to_mdp4_plane(x) container_of(x, struct mdp4_plane, base)
 
+/* MDP format helper functions */
+static inline
+enum mdp4_frame_format mdp4_get_frame_format(struct drm_framebuffer *fb)
+{
+	bool is_tile = false;
+
+	if (fb->modifier[1] == DRM_FORMAT_MOD_SAMSUNG_64_32_TILE)
+		is_tile = true;
+
+	if (fb->pixel_format == DRM_FORMAT_NV12 && is_tile)
+		return FRAME_TILE_YCBCR_420;
+
+	return FRAME_LINEAR;
+}
+
 static void mdp4_plane_set_scanout(struct drm_plane *plane,
 		struct drm_framebuffer *fb);
 static int mdp4_plane_mode_set(struct drm_plane *plane,
@@ -205,6 +220,7 @@ static int mdp4_plane_mode_set(struct drm_plane *plane,
 	uint32_t op_mode = 0;
 	uint32_t phasex_step = MDP4_VG_PHASE_STEP_DEFAULT;
 	uint32_t phasey_step = MDP4_VG_PHASE_STEP_DEFAULT;
+	enum mdp4_frame_format frame_type = mdp4_get_frame_format(fb);
 
 	if (!(crtc && fb)) {
 		DBG("%s: disabled!", mdp4_plane->name);
@@ -304,6 +320,7 @@ static int mdp4_plane_mode_set(struct drm_plane *plane,
 			MDP4_PIPE_SRC_FORMAT_UNPACK_COUNT(format->unpack_count - 1) |
 			MDP4_PIPE_SRC_FORMAT_FETCH_PLANES(format->fetch_type) |
 			MDP4_PIPE_SRC_FORMAT_CHROMA_SAMP(format->chroma_sample) |
+			MDP4_PIPE_SRC_FORMAT_FRAME_FORMAT(frame_type) |
 			COND(format->unpack_tight, MDP4_PIPE_SRC_FORMAT_UNPACK_TIGHT));
 
 	mdp4_write(mdp4_kms, REG_MDP4_PIPE_SRC_UNPACK(pipe),
@@ -324,6 +341,11 @@ static int mdp4_plane_mode_set(struct drm_plane *plane,
 	mdp4_write(mdp4_kms, REG_MDP4_PIPE_PHASEX_STEP(pipe), phasex_step);
 	mdp4_write(mdp4_kms, REG_MDP4_PIPE_PHASEY_STEP(pipe), phasey_step);
 
+	if (frame_type != FRAME_LINEAR)
+		mdp4_write(mdp4_kms, REG_MDP4_PIPE_SSTILE_FRAME_SIZE(pipe),
+				MDP4_PIPE_SSTILE_FRAME_SIZE_WIDTH(src_w) |
+				MDP4_PIPE_SSTILE_FRAME_SIZE_HEIGHT(src_h));
+
 	return 0;
 }
 

drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c

@@ -30,7 +30,7 @@ static struct mdp5_kms *get_kms(struct drm_encoder *encoder)
 	return to_mdp5_kms(to_mdp_kms(priv->kms));
 }
 
-#ifdef CONFIG_MSM_BUS_SCALING
+#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 #include <mach/board.h>
 #include <linux/msm-bus.h>
 #include <linux/msm-bus-board.h>
@@ -216,16 +216,12 @@ static void mdp5_cmd_encoder_mode_set(struct drm_encoder *encoder,
 static void mdp5_cmd_encoder_disable(struct drm_encoder *encoder)
 {
 	struct mdp5_cmd_encoder *mdp5_cmd_enc = to_mdp5_cmd_encoder(encoder);
-	struct mdp5_kms *mdp5_kms = get_kms(encoder);
 	struct mdp5_ctl *ctl = mdp5_crtc_get_ctl(encoder->crtc);
 	struct mdp5_interface *intf = &mdp5_cmd_enc->intf;
-	int lm = mdp5_crtc_get_lm(encoder->crtc);
 
 	if (WARN_ON(!mdp5_cmd_enc->enabled))
 		return;
 
-	/* Wait for the last frame done */
-	mdp_irq_wait(&mdp5_kms->base, lm2ppdone(lm));
 	pingpong_tearcheck_disable(encoder);
 
 	mdp5_ctl_set_encoder_state(ctl, false);
@@ -281,22 +277,22 @@ int mdp5_cmd_encoder_set_split_display(struct drm_encoder *encoder,
 	 * start signal for the slave encoder
 	 */
 	if (intf_num == 1)
-		data |= MDP5_SPLIT_DPL_UPPER_INTF2_SW_TRG_MUX;
+		data |= MDP5_MDP_SPLIT_DPL_UPPER_INTF2_SW_TRG_MUX;
 	else if (intf_num == 2)
-		data |= MDP5_SPLIT_DPL_UPPER_INTF1_SW_TRG_MUX;
+		data |= MDP5_MDP_SPLIT_DPL_UPPER_INTF1_SW_TRG_MUX;
 	else
 		return -EINVAL;
 
 	/* Smart Panel, Sync mode */
-	data |= MDP5_SPLIT_DPL_UPPER_SMART_PANEL;
+	data |= MDP5_MDP_SPLIT_DPL_UPPER_SMART_PANEL;
 
 	/* Make sure clocks are on when connectors calling this function. */
 	mdp5_enable(mdp5_kms);
-	mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_UPPER, data);
+	mdp5_write(mdp5_kms, REG_MDP5_MDP_SPLIT_DPL_UPPER(0), data);
 
-	mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_LOWER,
-			MDP5_SPLIT_DPL_LOWER_SMART_PANEL);
-	mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_EN, 1);
+	mdp5_write(mdp5_kms, REG_MDP5_MDP_SPLIT_DPL_LOWER(0),
+			MDP5_MDP_SPLIT_DPL_LOWER_SMART_PANEL);
+	mdp5_write(mdp5_kms, REG_MDP5_MDP_SPLIT_DPL_EN(0), 1);
 	mdp5_disable(mdp5_kms);
 
 	return 0;

drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c

 /*
- * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014-2015 The Linux Foundation. All rights reserved.
  * Copyright (C) 2013 Red Hat
  * Author: Rob Clark <robdclark@gmail.com>
  *
@@ -46,6 +46,11 @@ struct mdp5_crtc {
 	/* if there is a pending flip, these will be non-null: */
 	struct drm_pending_vblank_event *event;
 
+	/* Bits have been flushed at the last commit,
+	 * used to decide if a vsync has happened since last commit.
+	 */
+	u32 flushed_mask;
+
 #define PENDING_CURSOR 0x1
 #define PENDING_FLIP   0x2
 	atomic_t pending;
@@ -55,6 +60,11 @@ struct mdp5_crtc {
 
 	struct mdp_irq vblank;
 	struct mdp_irq err;
+	struct mdp_irq pp_done;
+
+	struct completion pp_completion;
+
+	bool cmd_mode;
 
 	struct {
 		/* protect REG_MDP5_LM_CURSOR* registers and cursor scanout_bo*/
@@ -82,12 +92,18 @@ static void request_pending(struct drm_crtc *crtc, uint32_t pending)
 	mdp_irq_register(&get_kms(crtc)->base, &mdp5_crtc->vblank);
 }
 
-static void crtc_flush(struct drm_crtc *crtc, u32 flush_mask)
+static void request_pp_done_pending(struct drm_crtc *crtc)
+{
+	struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
+	reinit_completion(&mdp5_crtc->pp_completion);
+}
+
+static u32 crtc_flush(struct drm_crtc *crtc, u32 flush_mask)
 {
 	struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
 
 	DBG("%s: flush=%08x", mdp5_crtc->name, flush_mask);
-	mdp5_ctl_commit(mdp5_crtc->ctl, flush_mask);
+	return mdp5_ctl_commit(mdp5_crtc->ctl, flush_mask);
 }
 
 /*
@@ -95,7 +111,7 @@ static void crtc_flush(struct drm_crtc *crtc, u32 flush_mask)
  * so that we can safely queue unref to current fb (ie. next
  * vblank we know hw is done w/ previous scanout_fb).
  */
-static void crtc_flush_all(struct drm_crtc *crtc)
+static u32 crtc_flush_all(struct drm_crtc *crtc)
 {
 	struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
 	struct drm_plane *plane;
@@ -103,7 +119,7 @@ static void crtc_flush_all(struct drm_crtc *crtc)
 
 	/* this should not happen: */
 	if (WARN_ON(!mdp5_crtc->ctl))
-		return;
+		return 0;
 
 	drm_atomic_crtc_for_each_plane(plane, crtc) {
 		flush_mask |= mdp5_plane_get_flush(plane);
@@ -111,7 +127,7 @@ static void crtc_flush_all(struct drm_crtc *crtc)
 
 	flush_mask |= mdp_ctl_flush_mask_lm(mdp5_crtc->lm);
 
-	crtc_flush(crtc, flush_mask);
+	return crtc_flush(crtc, flush_mask);
 }
 
 /* if file!=NULL, this is preclose potential cancel-flip path */
@@ -143,6 +159,8 @@ static void complete_flip(struct drm_crtc *crtc, struct drm_file *file)
 	}
 
 	if (mdp5_crtc->ctl && !crtc->state->enable) {
+		/* set STAGE_UNUSED for all layers */
+		mdp5_ctl_blend(mdp5_crtc->ctl, mdp5_crtc->lm, 0x00000000);
 		mdp5_ctl_release(mdp5_crtc->ctl);
 		mdp5_crtc->ctl = NULL;
 	}
@@ -274,8 +292,8 @@ static void mdp5_crtc_disable(struct drm_crtc *crtc)
 	if (WARN_ON(!mdp5_crtc->enabled))
 		return;
 
-	/* set STAGE_UNUSED for all layers */
-	mdp5_ctl_blend(mdp5_crtc->ctl, mdp5_crtc->lm, 0x00000000);
+	if (mdp5_crtc->cmd_mode)
+		mdp_irq_unregister(&mdp5_kms->base, &mdp5_crtc->pp_done);
 
 	mdp_irq_unregister(&mdp5_kms->base, &mdp5_crtc->err);
 	mdp5_disable(mdp5_kms);
@@ -296,6 +314,9 @@ static void mdp5_crtc_enable(struct drm_crtc *crtc)
 	mdp5_enable(mdp5_kms);
 	mdp_irq_register(&mdp5_kms->base, &mdp5_crtc->err);
 
+	if (mdp5_crtc->cmd_mode)
+		mdp_irq_register(&mdp5_kms->base, &mdp5_crtc->pp_done);
+
 	mdp5_crtc->enabled = true;
 }
 
@@ -396,7 +417,18 @@ static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc)
 		return;
 
 	blend_setup(crtc);
-	crtc_flush_all(crtc);
+
+	/* PP_DONE irq is only used by command mode for now.
+	 * It is better to request pending before FLUSH and START trigger
+	 * to make sure no pp_done irq missed.
+	 * This is safe because no pp_done will happen before SW trigger
+	 * in command mode.
+	 */
+	if (mdp5_crtc->cmd_mode)
+		request_pp_done_pending(crtc);
+
+	mdp5_crtc->flushed_mask = crtc_flush_all(crtc);
+
 	request_pending(crtc, PENDING_FLIP);
 }
 
@@ -601,6 +633,52 @@ static void mdp5_crtc_err_irq(struct mdp_irq *irq, uint32_t irqstatus)
 	DBG("%s: error: %08x", mdp5_crtc->name, irqstatus);
 }
 
+static void mdp5_crtc_pp_done_irq(struct mdp_irq *irq, uint32_t irqstatus)
+{
+	struct mdp5_crtc *mdp5_crtc = container_of(irq, struct mdp5_crtc,
+								pp_done);
+
+	complete(&mdp5_crtc->pp_completion);
+}
+
+static void mdp5_crtc_wait_for_pp_done(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
+	int ret;
+
+	ret = wait_for_completion_timeout(&mdp5_crtc->pp_completion,
+						msecs_to_jiffies(50));
+	if (ret == 0)
+		dev_warn(dev->dev, "pp done time out, lm=%d\n", mdp5_crtc->lm);
+}
+
+static void mdp5_crtc_wait_for_flush_done(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
+	int ret;
+
+	/* Should not call this function if crtc is disabled. */
+	if (!mdp5_crtc->ctl)
+		return;
+
+	ret = drm_crtc_vblank_get(crtc);
+	if (ret)
+		return;
+
+	ret = wait_event_timeout(dev->vblank[drm_crtc_index(crtc)].queue,
+		((mdp5_ctl_get_commit_status(mdp5_crtc->ctl) &
+		mdp5_crtc->flushed_mask) == 0),
+		msecs_to_jiffies(50));
+	if (ret <= 0)
+		dev_warn(dev->dev, "vblank time out, crtc=%d\n", mdp5_crtc->id);
+
+	mdp5_crtc->flushed_mask = 0;
+
+	drm_crtc_vblank_put(crtc);
+}
+
 uint32_t mdp5_crtc_vblank(struct drm_crtc *crtc)
 {
 	struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
@@ -622,16 +700,19 @@ void mdp5_crtc_set_intf(struct drm_crtc *crtc, struct mdp5_interface *intf)
 
 	/* now that we know what irq's we want: */
 	mdp5_crtc->err.irqmask = intf2err(intf->num);
-
-	/* Register command mode Pingpong done as vblank for now,
-	 * so that atomic commit should wait for it to finish.
-	 * Ideally, in the future, we should take rd_ptr done as vblank,
-	 * and let atomic commit wait for pingpong done for commond mode.
-	 */
-	if (intf->mode == MDP5_INTF_DSI_MODE_COMMAND)
-		mdp5_crtc->vblank.irqmask = lm2ppdone(lm);
-	else
 	mdp5_crtc->vblank.irqmask = intf2vblank(lm, intf);
+
+	if ((intf->type == INTF_DSI) &&
+		(intf->mode == MDP5_INTF_DSI_MODE_COMMAND)) {
+		mdp5_crtc->pp_done.irqmask = lm2ppdone(lm);
+		mdp5_crtc->pp_done.irq = mdp5_crtc_pp_done_irq;
+		mdp5_crtc->cmd_mode = true;
+	} else {
+		mdp5_crtc->pp_done.irqmask = 0;
+		mdp5_crtc->pp_done.irq = NULL;
+		mdp5_crtc->cmd_mode = false;
+	}
+
 	mdp_irq_update(&mdp5_kms->base);
 
 	mdp5_ctl_set_intf(mdp5_crtc->ctl, intf);
@@ -649,6 +730,16 @@ struct mdp5_ctl *mdp5_crtc_get_ctl(struct drm_crtc *crtc)
 	return WARN_ON(!crtc) ? NULL : mdp5_crtc->ctl;
 }
 
+void mdp5_crtc_wait_for_commit_done(struct drm_crtc *crtc)
+{
+	struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
+
+	if (mdp5_crtc->cmd_mode)
+		mdp5_crtc_wait_for_pp_done(crtc);
+	else
+		mdp5_crtc_wait_for_flush_done(crtc);
+}
+
 /* initialize crtc */
 struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
 		struct drm_plane *plane, int id)
@@ -667,6 +758,7 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
 
 	spin_lock_init(&mdp5_crtc->lm_lock);
 	spin_lock_init(&mdp5_crtc->cursor.lock);
+	init_completion(&mdp5_crtc->pp_completion);
 
 	mdp5_crtc->vblank.irq = mdp5_crtc_vblank_irq;
 	mdp5_crtc->err.irq = mdp5_crtc_err_irq;

drivers/gpu/drm/msm/mdp/mdp5/mdp5_ctl.c

@@ -392,8 +392,10 @@ static u32 fix_sw_flush(struct mdp5_ctl *ctl, u32 flush_mask)
  * CTL registers need to be flushed in some circumstances; if that is the
  * case, some trigger bits will be present in both flush mask and
  * ctl->pending_ctl_trigger.
+ *
+ * Return H/W flushed bit mask.
  */
-int mdp5_ctl_commit(struct mdp5_ctl *ctl, u32 flush_mask)
+u32 mdp5_ctl_commit(struct mdp5_ctl *ctl, u32 flush_mask)
 {
 	struct mdp5_ctl_manager *ctl_mgr = ctl->ctlm;
 	struct op_mode *pipeline = &ctl->pipeline;
@@ -424,7 +426,12 @@ int mdp5_ctl_commit(struct mdp5_ctl *ctl, u32 flush_mask)
 		refill_start_mask(ctl);
 	}
 
-	return 0;
+	return flush_mask;
+}
+
+u32 mdp5_ctl_get_commit_status(struct mdp5_ctl *ctl)
+{
+	return ctl_read(ctl, REG_MDP5_CTL_FLUSH(ctl->id));
 }
 
 void mdp5_ctl_release(struct mdp5_ctl *ctl)

drivers/gpu/drm/msm/mdp/mdp5/mdp5_ctl.h

@@ -88,7 +88,8 @@ u32 mdp_ctl_flush_mask_cursor(int cursor_id);
 u32 mdp_ctl_flush_mask_encoder(struct mdp5_interface *intf);
 
 /* @flush_mask: see CTL flush masks definitions below */
-int mdp5_ctl_commit(struct mdp5_ctl *ctl, u32 flush_mask);
+u32 mdp5_ctl_commit(struct mdp5_ctl *ctl, u32 flush_mask);
+u32 mdp5_ctl_get_commit_status(struct mdp5_ctl *ctl);
 
 void mdp5_ctl_release(struct mdp5_ctl *ctl);
 

drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c

@@ -36,7 +36,7 @@ static struct mdp5_kms *get_kms(struct drm_encoder *encoder)
 	return to_mdp5_kms(to_mdp_kms(priv->kms));
 }
 
-#ifdef CONFIG_MSM_BUS_SCALING
+#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
 #include <mach/board.h>
 #include <mach/msm_bus.h>
 #include <mach/msm_bus_board.h>
@@ -144,10 +144,14 @@ static void mdp5_encoder_mode_set(struct drm_encoder *encoder,
 			mode->type, mode->flags);
 
 	ctrl_pol = 0;
+
+	/* DSI controller cannot handle active-low sync signals. */
+	if (mdp5_encoder->intf.type != INTF_DSI) {
 		if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 			ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW;
 		if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 			ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW;
+	}
 	/* probably need to get DATA_EN polarity from panel.. */
 
 	dtv_hsync_skew = 0;  /* get this from panel? */
@@ -304,9 +308,9 @@ int mdp5_encoder_set_split_display(struct drm_encoder *encoder,
 	 * to use the master's enable signal for the slave encoder.
 	 */
 	if (intf_num == 1)
-		data |= MDP5_SPLIT_DPL_LOWER_INTF2_TG_SYNC;
+		data |= MDP5_MDP_SPLIT_DPL_LOWER_INTF2_TG_SYNC;
 	else if (intf_num == 2)
-		data |= MDP5_SPLIT_DPL_LOWER_INTF1_TG_SYNC;
+		data |= MDP5_MDP_SPLIT_DPL_LOWER_INTF1_TG_SYNC;
 	else
 		return -EINVAL;
 
@@ -315,9 +319,9 @@ int mdp5_encoder_set_split_display(struct drm_encoder *encoder,
 	mdp5_write(mdp5_kms, REG_MDP5_MDP_SPARE_0(0),
 		MDP5_MDP_SPARE_0_SPLIT_DPL_SINGLE_FLUSH_EN);
 	/* Dumb Panel, Sync mode */
-	mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_UPPER, 0);
-	mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_LOWER, data);
-	mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_EN, 1);
+	mdp5_write(mdp5_kms, REG_MDP5_MDP_SPLIT_DPL_UPPER(0), 0);
+	mdp5_write(mdp5_kms, REG_MDP5_MDP_SPLIT_DPL_LOWER(0), data);
+	mdp5_write(mdp5_kms, REG_MDP5_MDP_SPLIT_DPL_EN(0), 1);
 	mdp5_disable(mdp5_kms);
 
 	return 0;

drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c

@@ -80,6 +80,12 @@ static void mdp5_complete_commit(struct msm_kms *kms, struct drm_atomic_state *s
 	mdp5_disable(mdp5_kms);
 }
 
+static void mdp5_wait_for_crtc_commit_done(struct msm_kms *kms,
+						struct drm_crtc *crtc)
+{
+	mdp5_crtc_wait_for_commit_done(crtc);
+}
+
 static long mdp5_round_pixclk(struct msm_kms *kms, unsigned long rate,
 		struct drm_encoder *encoder)
 {
@@ -141,6 +147,7 @@ static const struct mdp_kms_funcs kms_funcs = {
 		.disable_vblank  = mdp5_disable_vblank,
 		.prepare_commit  = mdp5_prepare_commit,
 		.complete_commit = mdp5_complete_commit,
+		.wait_for_crtc_commit_done = mdp5_wait_for_crtc_commit_done,
 		.get_format      = mdp_get_format,
 		.round_pixclk    = mdp5_round_pixclk,
 		.set_split_display = mdp5_set_split_display,

drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h

@@ -237,6 +237,7 @@ int mdp5_crtc_get_lm(struct drm_crtc *crtc);
 struct mdp5_ctl *mdp5_crtc_get_ctl(struct drm_crtc *crtc);
 void mdp5_crtc_cancel_pending_flip(struct drm_crtc *crtc, struct drm_file *file);
 void mdp5_crtc_set_intf(struct drm_crtc *crtc, struct mdp5_interface *intf);
+void mdp5_crtc_wait_for_commit_done(struct drm_crtc *crtc);
 struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
 		struct drm_plane *plane, int id);
 

drivers/gpu/drm/msm/mdp/mdp_common.xml.h

@@ -10,17 +10,17 @@ git clone https://github.com/freedreno/envytools.git
 The rules-ng-ng source files this header was generated from are:
 - /home/robclark/src/freedreno/envytools/rnndb/msm.xml                 (    676 bytes, from 2014-12-05 15:34:49)
 - /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20908 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2357 bytes, from 2014-12-08 16:13:00)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  27208 bytes, from 2015-01-13 23:56:11)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  11712 bytes, from 2013-08-17 17:13:43)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml            (  20915 bytes, from 2015-03-24 22:05:22)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml      (   2352 bytes, from 2015-04-12 15:02:42)
+- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml            (  35083 bytes, from 2015-04-12 15:04:03)
+- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml             (  22094 bytes, from 2015-05-12 12:45:23)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml            (    344 bytes, from 2013-08-11 19:26:32)
 - /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml         (   1686 bytes, from 2014-10-31 16:48:57)
 - /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml         (    600 bytes, from 2013-07-05 19:21:12)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  26848 bytes, from 2015-01-13 23:55:57)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (   8253 bytes, from 2014-12-08 16:13:00)
+- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml           (  29012 bytes, from 2015-05-12 12:45:23)
+- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml             (  10416 bytes, from 2015-05-12 12:45:23)
 
-Copyright (C) 2013-2014 by the following authors:
+Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
 
 Permission is hereby granted, free of charge, to any person obtaining
@@ -52,7 +52,7 @@ enum mdp_chroma_samp_type {
 	CHROMA_420 = 3,
 };
 
-enum mdp_sspp_fetch_type {
+enum mdp_fetch_type {
 	MDP_PLANE_INTERLEAVED = 0,
 	MDP_PLANE_PLANAR = 1,
 	MDP_PLANE_PSEUDO_PLANAR = 2,

drivers/gpu/drm/msm/mdp/mdp_format.c

@@ -96,6 +96,12 @@ static const struct mdp_format formats[] = {
 	/*  name      a  r  g  b   e0 e1 e2 e3  alpha   tight  cpp cnt ... */
 	FMT(ARGB8888, 8, 8, 8, 8,  1, 0, 2, 3,  true,   true,  4,  4,
 			MDP_PLANE_INTERLEAVED, CHROMA_RGB),
+	FMT(ABGR8888, 8, 8, 8, 8,  2, 0, 1, 3,  true,   true,  4,  4,
+			MDP_PLANE_INTERLEAVED, CHROMA_RGB),
+	FMT(RGBA8888, 8, 8, 8, 8,  3, 1, 0, 2,  true,   true,  4,  4,
+			MDP_PLANE_INTERLEAVED, CHROMA_RGB),
+	FMT(BGRA8888, 8, 8, 8, 8,  3, 2, 0, 1,  true,   true,  4,  4,
+			MDP_PLANE_INTERLEAVED, CHROMA_RGB),
 	FMT(XRGB8888, 8, 8, 8, 8,  1, 0, 2, 3,  false,  true,  4,  4,
 			MDP_PLANE_INTERLEAVED, CHROMA_RGB),
 	FMT(RGB888,   0, 8, 8, 8,  1, 0, 2, 0,  false,  true,  3,  3,

drivers/gpu/drm/msm/mdp/mdp_kms.h

@@ -88,7 +88,7 @@ struct mdp_format {
 	uint8_t unpack[4];
 	bool alpha_enable, unpack_tight;
 	uint8_t cpp, unpack_count;
-	enum mdp_sspp_fetch_type fetch_type;
+	enum mdp_fetch_type fetch_type;
 	enum mdp_chroma_samp_type chroma_sample;
 };
 #define to_mdp_format(x) container_of(x, struct mdp_format, base)

drivers/gpu/drm/msm/msm_drv.h

@@ -165,7 +165,7 @@ int msm_atomic_commit(struct drm_device *dev,
 int msm_register_mmu(struct drm_device *dev, struct msm_mmu *mmu);
 
 int msm_wait_fence_interruptable(struct drm_device *dev, uint32_t fence,
-		struct timespec *timeout);
+		ktime_t *timeout);
 int msm_queue_fence_cb(struct drm_device *dev,
 		struct msm_fence_cb *cb, uint32_t fence);
 void msm_update_fence(struct drm_device *dev, uint32_t fence);
@@ -205,7 +205,7 @@ void msm_gem_move_to_active(struct drm_gem_object *obj,
 		struct msm_gpu *gpu, bool write, uint32_t fence);
 void msm_gem_move_to_inactive(struct drm_gem_object *obj);
 int msm_gem_cpu_prep(struct drm_gem_object *obj, uint32_t op,
-		struct timespec *timeout);
+		ktime_t *timeout);
 int msm_gem_cpu_fini(struct drm_gem_object *obj);
 void msm_gem_free_object(struct drm_gem_object *obj);
 int msm_gem_new_handle(struct drm_device *dev, struct drm_file *file,

drivers/gpu/drm/msm/msm_gem.h

@@ -96,6 +96,7 @@ static inline uint32_t msm_gem_fence(struct msm_gem_object *msm_obj,
 struct msm_gem_submit {
 	struct drm_device *dev;
 	struct msm_gpu *gpu;
+	struct list_head node;   /* node in gpu submit_list */
 	struct list_head bo_list;
 	struct ww_acquire_ctx ticket;
 	uint32_t fence;