drivers/net/atl1e: Use netdev_printk helpers

Logging messages sometimes had duplicated "ATL1E" output.

For instance:
ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
is now:
ATL1E 0000:03:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>

Add some consistency to logging messages
Add some missing \n's to logging messages
Miscellaneous typo spelling corrections
Change atl1e_validate_option argument from pdev to adapter
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/atl1e/atl1e_hw.c

@@ -394,7 +394,6 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
 int atl1e_phy_commit(struct atl1e_hw *hw)
 {
 	struct atl1e_adapter *adapter = hw->adapter;
-	struct pci_dev *pdev = adapter->pdev;
 	int ret_val;
 	u16 phy_data;
 
@@ -415,12 +414,12 @@ int atl1e_phy_commit(struct atl1e_hw *hw)
 		}
 
 		if (0 != (val & (MDIO_START | MDIO_BUSY))) {
-			dev_err(&pdev->dev,
+			netdev_err(adapter->netdev,
 				   "pcie linkdown at least for 25ms\n");
 			return ret_val;
 		}
 
-		dev_err(&pdev->dev, "pcie linkup after %d ms\n", i);
+		netdev_err(adapter->netdev, "pcie linkup after %d ms\n", i);
 	}
 	return 0;
 }
@@ -428,7 +427,6 @@ int atl1e_phy_commit(struct atl1e_hw *hw)
 int atl1e_phy_init(struct atl1e_hw *hw)
 {
 	struct atl1e_adapter *adapter = hw->adapter;
-	struct pci_dev *pdev = adapter->pdev;
 	s32 ret_val;
 	u16 phy_val;
 
@@ -492,20 +490,22 @@ int atl1e_phy_init(struct atl1e_hw *hw)
 	/*Enable PHY LinkChange Interrupt */
 	ret_val = atl1e_write_phy_reg(hw, MII_INT_CTRL, 0xC00);
 	if (ret_val) {
-		dev_err(&pdev->dev, "Error enable PHY linkChange Interrupt\n");
+		netdev_err(adapter->netdev,
+			   "Error enable PHY linkChange Interrupt\n");
 		return ret_val;
 	}
 	/* setup AutoNeg parameters */
 	ret_val = atl1e_phy_setup_autoneg_adv(hw);
 	if (ret_val) {
-		dev_err(&pdev->dev, "Error Setting up Auto-Negotiation\n");
+		netdev_err(adapter->netdev,
+			   "Error Setting up Auto-Negotiation\n");
 		return ret_val;
 	}
 	/* SW.Reset & En-Auto-Neg to restart Auto-Neg*/
-	dev_dbg(&pdev->dev, "Restarting Auto-Neg");
+	netdev_dbg(adapter->netdev, "Restarting Auto-Negotiation\n");
 	ret_val = atl1e_phy_commit(hw);
 	if (ret_val) {
-		dev_err(&pdev->dev, "Error Resetting the phy");
+		netdev_err(adapter->netdev, "Error resetting the phy\n");
 		return ret_val;
 	}
 
@@ -559,9 +559,8 @@ int atl1e_reset_hw(struct atl1e_hw *hw)
 	}
 
 	if (timeout >= AT_HW_MAX_IDLE_DELAY) {
-		dev_err(&pdev->dev,
-			"MAC state machine cann't be idle since"
-			" disabled for 10ms second\n");
+		netdev_err(adapter->netdev,
+			   "MAC state machine can't be idle since disabled for 10ms second\n");
 		return AT_ERR_TIMEOUT;
 	}
 

drivers/net/atl1e/atl1e_param.c

@@ -116,7 +116,7 @@ struct atl1e_option {
 	} arg;
 };
 
-static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct pci_dev *pdev)
+static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct atl1e_adapter *adapter)
 {
 	if (*value == OPTION_UNSET) {
 		*value = opt->def;
@@ -127,16 +127,19 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
-			dev_info(&pdev->dev, "%s Enabled\n", opt->name);
+			netdev_info(adapter->netdev,
+				    "%s Enabled\n", opt->name);
 			return 0;
 		case OPTION_DISABLED:
-			dev_info(&pdev->dev, "%s Disabled\n", opt->name);
+			netdev_info(adapter->netdev,
+				    "%s Disabled\n", opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			dev_info(&pdev->dev, "%s set to %i\n", opt->name, *value);
+			netdev_info(adapter->netdev, "%s set to %i\n",
+				    opt->name, *value);
 			return 0;
 		}
 		break;
@@ -148,8 +151,8 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
 				ent = &opt->arg.l.p[i];
 				if (*value == ent->i) {
 					if (ent->str[0] != '\0')
-						dev_info(&pdev->dev, "%s\n",
-							ent->str);
+						netdev_info(adapter->netdev,
+							    "%s\n", ent->str);
 					return 0;
 				}
 			}
@@ -159,7 +162,7 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
 		BUG();
 	}
 
-	dev_info(&pdev->dev, "Invalid %s specified (%i) %s\n",
+	netdev_info(adapter->netdev, "Invalid %s specified (%i) %s\n",
 		    opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
@@ -176,11 +179,13 @@ static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt,
  */
 void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 {
-	struct pci_dev *pdev = adapter->pdev;
 	int bd = adapter->bd_number;
+
 	if (bd >= ATL1E_MAX_NIC) {
-		dev_notice(&pdev->dev, "no configuration for board #%i\n", bd);
-		dev_notice(&pdev->dev, "Using defaults for all values\n");
+		netdev_notice(adapter->netdev,
+			      "no configuration for board #%i\n", bd);
+		netdev_notice(adapter->netdev,
+			      "Using defaults for all values\n");
 	}
 
 	{ 		/* Transmit Ring Size */
@@ -196,7 +201,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_tx_desc_cnt > bd) {
 			val = tx_desc_cnt[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->tx_ring.count = (u16) val & 0xFFFC;
 		} else
 			adapter->tx_ring.count = (u16)opt.def;
@@ -215,7 +220,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_rx_mem_size > bd) {
 			val = rx_mem_size[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->rx_ring.page_size = (u32)val * 1024;
 		} else {
 			adapter->rx_ring.page_size = (u32)opt.def * 1024;
@@ -235,7 +240,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_int_mod_timer > bd) {
 			val = int_mod_timer[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->hw.imt = (u16) val;
 		} else
 			adapter->hw.imt = (u16)(opt.def);
@@ -254,7 +259,7 @@ void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
 		int val;
 		if (num_media_type > bd) {
 			val = media_type[bd];
-			atl1e_validate_option(&val, &opt, pdev);
+			atl1e_validate_option(&val, &opt, adapter);
 			adapter->hw.media_type = (u16) val;
 		} else
 			adapter->hw.media_type = (u16)(opt.def);