Commit ba44f971 authored by Jamie Lenehan's avatar Jamie Lenehan Committed by James Bottomley

[PATCH] dc395x [1/5] - formatting cleanups

Formatting cleanups.
- Remove lots of comments that were out-of-date, wrong, or now
  described things that had been simplified that much that the
  comments were no longer needed.
- Move the "static" definition from a line before functions onto the
  same line as the function itself.
- Remove "return;" from the end of void functions.
- Remove braces from around single instructions.
- Merge the declaration and assignment to variables in places where
  the followed each other.
- Remove braces from around single statement that obviously didn't
  need them.
- Remove unused code and variables.
- Fix debug statement in disconnect to not deref potentially null
  ptr.
- Change a lot of short comments that take up three lines down to one
  line.
parent 17179e8f
......@@ -87,7 +87,6 @@
#define DBG_SGPARANOIA 0x0020
#define DBG_FIFO 0x0040
#define DBG_PIO 0x0080
#define DBG_RECURSION 0x0100 /* check for excessive recursion */
#define DBG_MALLOC 0x0200 /* report on memory allocations */
#define DBG_TRACE 0x0400
#define DBG_TRACEALL 0x0800
......@@ -138,16 +137,6 @@
#endif
/*
* The recursion debugging just counts entries into the driver and
* prints out a messge if it exceeds a certain limit. This variable
* hold the count.
*/
#if debug_enabled(DBG_RECURSION)
static int dbg_in_driver = 0;
#endif
/*
* Memory allocation debugging
* Just reports when memory is allocated and/or released.
......@@ -182,7 +171,6 @@ inline void dc395x_kfree(const void *adr)
#if debug_enabled(DBG_TRACE|DBG_TRACEALL)
# define DEBUGTRACEBUFSZ 512
static char tracebuf[64];
static char traceoverflow[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
# define TRACEPRINTF(x...) \
do { \
int ln = sprintf(tracebuf, x); \
......@@ -212,24 +200,13 @@ static char traceoverflow[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
#endif
#define DC395x_LOCK_IO(dev,flags) spin_lock_irqsave(((struct Scsi_Host *)dev)->host_lock, flags)
#define DC395x_UNLOCK_IO(dev,flags) spin_unlock_irqrestore(((struct Scsi_Host *)dev)->host_lock, flags)
#define DC395x_ACB_INITLOCK(acb) spin_lock_init(&acb->smp_lock)
#define DC395x_ACB_LOCK(acb,acb_flags) if (!acb->lock_level_count[cpuid]) { spin_lock_irqsave(&acb->smp_lock,acb_flags); acb->lock_level_count[cpuid]++; } else { acb->lock_level_count[cpuid]++; }
#define DC395x_ACB_UNLOCK(acb,acb_flags) if (--acb->lock_level_count[cpuid] == 0) { spin_unlock_irqrestore(&acb->smp_lock,acb_flags); }
#define DC395x_SMP_IO_LOCK(dev,irq_flags) spin_lock_irqsave(((struct Scsi_Host*)dev)->host_lock,irq_flags)
#define DC395x_SMP_IO_UNLOCK(dev,irq_flags) spin_unlock_irqrestore(((struct Scsi_Host*)dev)->host_lock,irq_flags)
#define DC395x_read8(acb,address) (u8)(inb(acb->io_port_base + (address)))
#define DC395x_read8_(address, base) (u8)(inb((USHORT)(base) + (address)))
#define DC395x_read16(acb,address) (u16)(inw(acb->io_port_base + (address)))
#define DC395x_read32(acb,address) (u32)(inl(acb->io_port_base + (address)))
#define DC395x_write8(acb,address,value) outb((value), acb->io_port_base + (address))
#define DC395x_write8_(address,value,base) outb((value), (USHORT)(base) + (address))
#define DC395x_write16(acb,address,value) outw((value), acb->io_port_base + (address))
#define DC395x_write32(acb,address,value) outl((value), acb->io_port_base + (address))
......@@ -254,20 +231,15 @@ static char traceoverflow[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
#define SET_RES_DID(who,did) { who &= ~RES_DID; who |= (int)(did) << 16; }
#define SET_RES_DRV(who,drv) { who &= ~RES_DRV; who |= (int)(drv) << 24; }
/*
**************************************************************************
*/
#define TAG_NONE 255
struct SGentry {
u32 address; /* bus! address */
u32 length;
};
/*
* The SEEPROM structure for TRM_S1040
*/
/* The SEEPROM structure for TRM_S1040 */
struct NVRamTarget {
u8 cfg0; /* Target configuration byte 0 */
u8 period; /* Target period */
......@@ -275,7 +247,6 @@ struct NVRamTarget {
u8 cfg3; /* Target configuration byte 3 */
};
struct NvRamType {
u8 sub_vendor_id[2]; /* 0,1 Sub Vendor ID */
u8 sub_sys_id[2]; /* 2,3 Sub System ID */
......@@ -302,10 +273,6 @@ struct NvRamType {
u16 cksum; /* 126,127 */
};
/*-----------------------------------------------------------------------
SCSI Request Block
-----------------------------------------------------------------------*/
struct ScsiReqBlk {
struct list_head list; /* next/prev ptrs for srb lists */
struct DeviceCtlBlk *dcb;
......@@ -346,10 +313,6 @@ struct ScsiReqBlk {
#endif
};
/*-----------------------------------------------------------------------
Device Control Block
-----------------------------------------------------------------------*/
struct DeviceCtlBlk {
struct list_head list; /* next/prev ptrs for the dcb list */
struct AdapterCtlBlk *acb;
......@@ -377,9 +340,6 @@ struct DeviceCtlBlk {
u8 init_tcq_flag;
};
/*-----------------------------------------------------------------------
Adapter Control Block
-----------------------------------------------------------------------*/
struct AdapterCtlBlk {
struct Scsi_Host *scsi_host;
......@@ -423,51 +383,37 @@ struct AdapterCtlBlk {
};
/*---------------------------------------------------------------------------
Forward declarations
---------------------------------------------------------------------------*/
static void data_out_phase0(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void data_in_phase0(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void command_phase0(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void status_phase0(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void msgout_phase0(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void msgin_phase0(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void data_out_phase1(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void data_in_phase1(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void command_phase1(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void status_phase1(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void msgout_phase1(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void msgin_phase1(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb,
u16 * pscsi_status);
static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status);
static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status);
u16 *pscsi_status);
static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status);
u16 *pscsi_status);
static void set_basic_config(struct AdapterCtlBlk *acb);
static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb);
......@@ -481,19 +427,16 @@ static u8 start_scsi(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
static void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb);
static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_code,
Scsi_Cmnd * cmd, u8 force);
Scsi_Cmnd *cmd, u8 force);
static void scsi_reset_detect(struct AdapterCtlBlk *acb);
static void pci_unmap_srb(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb);
static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb);
static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb);
static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb);
static void srb_done(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb,
static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb);
static void request_sense(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb,
static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb);
static inline void set_xfer_rate(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb);
......@@ -506,9 +449,6 @@ static void waiting_timeout(unsigned long ptr);
static u16 current_sync_offset = 0;
static char monitor_next_irq = 0;
/*
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
*/
static void *dc395x_scsi_phase0[] = {
data_out_phase0,/* phase:0 */
data_in_phase0, /* phase:1 */
......@@ -520,9 +460,6 @@ static void *dc395x_scsi_phase0[] = {
msgin_phase0, /* phase:7 */
};
/*
* dc395x_statev = (void *)dc395x_scsi_phase1[phase]
*/
static void *dc395x_scsi_phase1[] = {
data_out_phase1,/* phase:0 */
data_in_phase1, /* phase:1 */
......@@ -558,8 +495,6 @@ static void *dc395x_scsi_phase1[] = {
/* real period:48ns,76ns,100ns,124ns,148ns,176ns,200ns,248ns */
static u8 clock_period[] = { 12, 18, 25, 31, 37, 43, 50, 62 };
static u16 clock_speed[] = { 200, 133, 100, 80, 67, 58, 50, 40 };
/* real period:48ns,72ns,100ns,124ns,148ns,172ns,200ns,248ns */
/*---------------------------------------------------------------------------
......@@ -655,8 +590,9 @@ static struct ParameterData __initdata cfg_data[] = {
/*
* Safe settings. If set to zero the the BIOS/default values with command line
* overrides will be used. If set to 1 then safe and slow settings will be used.
* Safe settings. If set to zero the the BIOS/default values with
* command line overrides will be used. If set to 1 then safe and
* slow settings will be used.
*/
static int use_safe_settings = 0;
module_param_named(safe, use_safe_settings, bool, 0);
......@@ -686,8 +622,7 @@ MODULE_PARM_DESC(reset_delay, "Reset delay in seconds. Default 1 (0-180)");
* set_safe_settings - if the use_safe_settings option is set then
* set all values to the safe and slow values.
**/
static
void __init set_safe_settings(void)
static void __init set_safe_settings(void)
{
if (use_safe_settings)
{
......@@ -706,8 +641,7 @@ void __init set_safe_settings(void)
* fix_settings - reset any boot parameters which are out of range
* back to the default values.
**/
static
void __init fix_settings(void)
static void __init fix_settings(void)
{
int i;
......@@ -720,12 +654,10 @@ void __init fix_settings(void)
cfg_data[CFG_RESET_DELAY].value);
for (i = 0; i < CFG_NUM; i++)
{
if (cfg_data[i].value < cfg_data[i].min ||
cfg_data[i].value > cfg_data[i].max)
{
if (cfg_data[i].value < cfg_data[i].min
|| cfg_data[i].value > cfg_data[i].max)
cfg_data[i].value = cfg_data[i].def;
}
}
}
......@@ -734,8 +666,8 @@ void __init fix_settings(void)
* Mapping from the eeprom delay index value (index into this array)
* to the the number of actual seconds that the delay should be for.
*/
static
char __initdata eeprom_index_to_delay_map[] = { 1, 3, 5, 10, 16, 30, 60, 120 };
static char __initdata eeprom_index_to_delay_map[] =
{ 1, 3, 5, 10, 16, 30, 60, 120 };
/**
......@@ -744,25 +676,24 @@ char __initdata eeprom_index_to_delay_map[] = { 1, 3, 5, 10, 16, 30, 60, 120 };
*
* @eeprom: The eeprom structure in which we find the delay index to map.
**/
static
void __init eeprom_index_to_delay(struct NvRamType *eeprom)
static void __init eeprom_index_to_delay(struct NvRamType *eeprom)
{
eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
}
/**
* delay_to_eeprom_index - Take a delay in seconds and return the closest
* eeprom index which will delay for at least that amount of seconds.
* delay_to_eeprom_index - Take a delay in seconds and return the
* closest eeprom index which will delay for at least that amount of
* seconds.
*
* @delay: The delay, in seconds, to find the eeprom index for.
**/
static int __init delay_to_eeprom_index(int delay)
{
u8 idx = 0;
while (idx < 7 && eeprom_index_to_delay_map[idx] < delay) {
while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
idx++;
}
return idx;
}
......@@ -774,38 +705,34 @@ static int __init delay_to_eeprom_index(int delay)
*
* @eeprom: The eeprom data to override with command line options.
**/
static
void __init eeprom_override(struct NvRamType *eeprom)
static void __init eeprom_override(struct NvRamType *eeprom)
{
u8 id;
/* Adapter Settings */
if (cfg_data[CFG_ADAPTER_ID].value != CFG_PARAM_UNSET) {
eeprom->scsi_id =
(u8)cfg_data[CFG_ADAPTER_ID].value;
}
if (cfg_data[CFG_ADAPTER_MODE].value != CFG_PARAM_UNSET) {
eeprom->channel_cfg =
(u8)cfg_data[CFG_ADAPTER_MODE].value;
}
if (cfg_data[CFG_RESET_DELAY].value != CFG_PARAM_UNSET) {
eeprom->delay_time =
delay_to_eeprom_index(cfg_data[CFG_RESET_DELAY].value);
}
if (cfg_data[CFG_TAGS].value != CFG_PARAM_UNSET) {
if (cfg_data[CFG_ADAPTER_ID].value != CFG_PARAM_UNSET)
eeprom->scsi_id = (u8)cfg_data[CFG_ADAPTER_ID].value;
if (cfg_data[CFG_ADAPTER_MODE].value != CFG_PARAM_UNSET)
eeprom->channel_cfg = (u8)cfg_data[CFG_ADAPTER_MODE].value;
if (cfg_data[CFG_RESET_DELAY].value != CFG_PARAM_UNSET)
eeprom->delay_time = delay_to_eeprom_index(
cfg_data[CFG_RESET_DELAY].value);
if (cfg_data[CFG_TAGS].value != CFG_PARAM_UNSET)
eeprom->max_tag = (u8)cfg_data[CFG_TAGS].value;
}
/* Device Settings */
for (id = 0; id < DC395x_MAX_SCSI_ID; id++) {
if (cfg_data[CFG_DEV_MODE].value != CFG_PARAM_UNSET) {
if (cfg_data[CFG_DEV_MODE].value != CFG_PARAM_UNSET)
eeprom->target[id].cfg0 =
(u8)cfg_data[CFG_DEV_MODE].value;
}
if (cfg_data[CFG_MAX_SPEED].value != CFG_PARAM_UNSET) {
if (cfg_data[CFG_MAX_SPEED].value != CFG_PARAM_UNSET)
eeprom->target[id].period =
(u8)cfg_data[CFG_MAX_SPEED].value;
}
}
}
......@@ -813,14 +740,7 @@ void __init eeprom_override(struct NvRamType *eeprom)
/*---------------------------------------------------------------------------
---------------------------------------------------------------------------*/
/**
* list_size - Returns the size (in number of entries) of the
* supplied list.
*
* @head: The pointer to the head of the list to count the items in.
**/
static
unsigned int list_size(struct list_head *head)
static unsigned int list_size(struct list_head *head)
{
unsigned int count = 0;
struct list_head *pos;
......@@ -830,18 +750,7 @@ unsigned int list_size(struct list_head *head)
}
/**
* dcb_get_next - Given a dcb return the next dcb in the list of
* dcb's, wrapping back to the start of the dcb list if required.
* Returns the supplied dcb if there is only one dcb in the list.
*
* @head: The pointer to the head of the list to count the items in.
* @pos: The pointer the dcb for which we are searching for the
* following dcb.
**/
static
struct DeviceCtlBlk *dcb_get_next(
struct list_head *head,
static struct DeviceCtlBlk *dcb_get_next(struct list_head *head,
struct DeviceCtlBlk *pos)
{
int use_next = 0;
......@@ -870,22 +779,7 @@ struct DeviceCtlBlk *dcb_get_next(
}
/*
* Queueing philosphy:
* There are a couple of lists:
* - Waiting: Contains a list of SRBs not yet sent (per DCB)
* - Free: List of free SRB slots
*
* If there are no waiting commands for the DCB, the new one is sent to the bus
* otherwise the oldest one is taken from the Waiting list and the new one is
* queued to the Waiting List
*
* Lists are managed using two pointers and eventually a counter
*/
/* Nomen est omen ... */
static inline
void free_tag(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
static void free_tag(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
if (srb->tag_number < 255) {
dcb->tag_mask &= ~(1 << srb->tag_number); /* free tag mask */
......@@ -895,8 +789,7 @@ void free_tag(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
/* Find cmd in SRB list */
inline static
struct ScsiReqBlk *find_cmd(Scsi_Cmnd *cmd,
inline static struct ScsiReqBlk *find_cmd(Scsi_Cmnd *cmd,
struct list_head *head)
{
struct ScsiReqBlk *i;
......@@ -907,12 +800,7 @@ struct ScsiReqBlk *find_cmd(Scsi_Cmnd *cmd,
}
/*
* srb_get_free - Return a free srb from the list of free SRBs that
* is stored with the acb.
*/
static
struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
static struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
{
struct list_head *head = &acb->srb_free_list;
struct ScsiReqBlk *srb;
......@@ -929,62 +817,37 @@ struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
}
/*
* srb_free_insert - Insert an srb to the head of the free list
* stored in the acb.
*/
static
void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_free_insert: put srb %p\n", srb);
list_add_tail(&srb->list, &acb->srb_free_list);
}
/*
* srb_waiting_insert - Insert an srb to the head of the wiating list
* stored in the dcb.
*/
static
void srb_waiting_insert(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_waiting_insert: srb %p cmd %li\n", srb, srb->cmd->pid);
list_add(&srb->list, &dcb->srb_waiting_list);
}
/*
* srb_waiting_append - Append an srb to the tail of the waiting list
* stored in the dcb.
*/
static inline
void srb_waiting_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
static void srb_waiting_append(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_waiting_append: srb %p cmd %li\n", srb, srb->cmd->pid);
list_add_tail(&srb->list, &dcb->srb_waiting_list);
}
/*
* srb_going_append - Append an srb to the tail of the going list
* stored in the dcb.
*/
static inline
void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_going_append: srb %p\n", srb);
list_add_tail(&srb->list, &dcb->srb_going_list);
}
/*
* srb_going_remove - Remove an srb from the going list stored in the
* dcb.
*/
static
void srb_going_remove(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
static void srb_going_remove(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
......@@ -998,12 +861,7 @@ void srb_going_remove(struct DeviceCtlBlk *dcb,
}
/*
* srb_waiting_remove - Remove an srb from the waiting list stored in the
* dcb.
*/
static
void srb_waiting_remove(struct DeviceCtlBlk *dcb,
static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
struct ScsiReqBlk *i;
......@@ -1018,37 +876,25 @@ void srb_waiting_remove(struct DeviceCtlBlk *dcb,
}
/*
* srb_going_to_waiting_move - Remove an srb from the going list in
* the dcb and insert it at the head of the waiting list in the dcb.
*/
static
void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_going_waiting_move: srb %p, pid = %li\n", srb, srb->cmd->pid);
dprintkdbg(DBG_0, "srb_going_to_waiting_move: srb %p, pid = %li\n", srb, srb->cmd->pid);
list_move(&srb->list, &dcb->srb_waiting_list);
}
/*
* srb_waiting_to_going_move - Remove an srb from the waiting list in
* the dcb and insert it at the head of the going list in the dcb.
*/
static
void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
static void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
/* Remove from waiting list */
dprintkdbg(DBG_0, "srb_waiting_to_going: srb %p\n", srb);
dprintkdbg(DBG_0, "srb_waiting_to_going_move: srb %p\n", srb);
TRACEPRINTF("WtG *");
list_move(&srb->list, &dcb->srb_going_list);
}
/* Sets the timer to wake us up */
static
void waiting_set_timer(struct AdapterCtlBlk *acb, unsigned long to)
static void waiting_set_timer(struct AdapterCtlBlk *acb, unsigned long to)
{
if (timer_pending(&acb->waiting_timer))
return;
......@@ -1065,8 +911,7 @@ void waiting_set_timer(struct AdapterCtlBlk *acb, unsigned long to)
/* Send the next command from the waiting list to the bus */
static
void waiting_process_next(struct AdapterCtlBlk *acb)
static void waiting_process_next(struct AdapterCtlBlk *acb)
{
struct DeviceCtlBlk *start = NULL;
struct DeviceCtlBlk *pos;
......@@ -1074,7 +919,7 @@ void waiting_process_next(struct AdapterCtlBlk *acb)
struct ScsiReqBlk *srb;
struct list_head *dcb_list_head = &acb->dcb_list;
if ((acb->active_dcb)
if (acb->active_dcb
|| (acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV)))
return;
......@@ -1135,7 +980,7 @@ void waiting_process_next(struct AdapterCtlBlk *acb)
static void waiting_timeout(unsigned long ptr)
{
unsigned long flags;
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *) ptr;
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
dprintkdbg(DBG_KG, "Debug: Waiting queue woken up by timer.\n");
DC395x_LOCK_IO(acb->scsi_host, flags);
waiting_process_next(acb);
......@@ -1144,28 +989,17 @@ static void waiting_timeout(unsigned long ptr)
/* Get the DCB for a given ID/LUN combination */
static inline
struct DeviceCtlBlk *find_dcb(struct AdapterCtlBlk *acb, u8 id, u8 lun)
static struct DeviceCtlBlk *find_dcb(struct AdapterCtlBlk *acb, u8 id, u8 lun)
{
return acb->children[id][lun];
}
/***********************************************************************
* Function: static void send_srb (struct AdapterCtlBlk* acb, struct ScsiReqBlk* srb)
*
* Purpose: Send SCSI Request Block (srb) to adapter (acb)
*
* dc395x_queue_command
* waiting_process_next
*
***********************************************************************/
static
void send_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
/* Send SCSI Request Block (srb) to adapter (acb) */
static void send_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
struct DeviceCtlBlk *dcb;
struct DeviceCtlBlk *dcb = srb->dcb;
dcb = srb->dcb;
if (dcb->max_command <= list_size(&dcb->srb_going_list) ||
acb->active_dcb ||
(acb->acb_flag & (RESET_DETECT + RESET_DONE + RESET_DEV))) {
......@@ -1174,26 +1008,17 @@ void send_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
return;
}
if (!start_scsi(acb, dcb, srb)) {
if (!start_scsi(acb, dcb, srb))
srb_going_append(dcb, srb);
} else {
else {
srb_waiting_insert(dcb, srb);
waiting_set_timer(acb, HZ / 50);
}
}
/*
*********************************************************************
*
* Function: static void build_srb (Scsi_Cmd *cmd, struct DeviceCtlBlk* dcb, struct ScsiReqBlk* srb)
*
* Purpose: Prepare SRB for being sent to Device DCB w/ command *cmd
*
*********************************************************************
*/
static
void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
/* Prepare SRB for being sent to Device DCB w/ command *cmd */
static void build_srb(Scsi_Cmnd *cmd, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
int i, max;
......@@ -1202,11 +1027,9 @@ void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
u32 request_size;
int dir;
dprintkdbg(DBG_0, "build_srb..............\n");
/*memset (srb, 0, sizeof (struct ScsiReqBlk)); */
dprintkdbg(DBG_0, "build_srb...\n");
srb->dcb = dcb;
srb->cmd = cmd;
/* Find out about direction */
dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
if (cmd->use_sg && dir != PCI_DMA_NONE) {
......@@ -1215,7 +1038,7 @@ void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
* will probably go wrong. */
max = srb->sg_count =
pci_map_sg(dcb->acb->dev,
(struct scatterlist *) cmd->request_buffer,
(struct scatterlist *)cmd->request_buffer,
cmd->use_sg, dir);
sgp = srb->segment_x;
request_size = cmd->request_bufflen;
......@@ -1226,7 +1049,7 @@ void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
dprintkdbg(DBG_SGPARANOIA,
"Mapped %i Segments to %i\n", cmd->use_sg,
srb->sg_count);
sl = (struct scatterlist *) cmd->request_buffer;
sl = (struct scatterlist *)cmd->request_buffer;
srb->virt_addr = page_address(sl->page);
for (i = 0; i < max; i++) {
......@@ -1326,7 +1149,6 @@ void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
srb->end_message = 0;
return;
}
......@@ -1350,8 +1172,7 @@ void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
* and is expected to be held on return.
*
**/
static int
dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
static int dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
{
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
......@@ -1364,14 +1185,6 @@ dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
cmd->device->lun,
cmd->pid);
#if debug_enabled(DBG_RECURSION)
if (dbg_in_driver++ > NORM_REC_LVL) {
dprintkl(KERN_DEBUG,
"%i queue_command () recursion? (pid=%li)\n",
dbg_in_driver, cmd->pid);
}
#endif
/* Assume BAD_TARGET; will be cleared later */
cmd->result = DID_BAD_TARGET << 16;
......@@ -1403,7 +1216,6 @@ dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
cmd->scsi_done = done;
cmd->result = 0;
/* get a free SRB */
srb = srb_get_free(acb);
if (!srb)
{
......@@ -1415,7 +1227,6 @@ dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
return 1;
}
/* build srb for the command */
build_srb(cmd, dcb, srb);
if (!list_empty(&dcb->srb_waiting_list)) {
......@@ -1427,10 +1238,6 @@ dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
send_srb(acb, srb);
}
dprintkdbg(DBG_1, "... command (pid %li) queued successfully.\n", cmd->pid);
#if debug_enabled(DBG_RECURSION)
dbg_in_driver--
#endif
return 0;
complete:
......@@ -1440,28 +1247,16 @@ dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
* done when the commad is for things like non existent
* devices.
*/
#if debug_enabled(DBG_RECURSION)
dbg_in_driver--
#endif
done(cmd);
return 0;
}
/*
*********************************************************************
*
* Function : dc395x_bios_param
* Description: Return the disk geometry for the given SCSI device.
*********************************************************************
* Return the disk geometry for the given SCSI device.
*/
static
int dc395x_bios_param(struct scsi_device *sdev,
struct block_device *bdev,
sector_t capacity,
int *info)
static int dc395x_bios_param(struct scsi_device *sdev,
struct block_device *bdev, sector_t capacity, int *info)
{
#ifdef CONFIG_SCSI_DC395x_TRMS1040_TRADMAP
int heads, sectors, cylinders;
......@@ -1469,7 +1264,7 @@ int dc395x_bios_param(struct scsi_device *sdev,
int size = capacity;
dprintkdbg(DBG_0, "dc395x_bios_param..............\n");
acb = (struct AdapterCtlBlk *) sdev->host->hostdata;
acb = (struct AdapterCtlBlk *)sdev->host->hostdata;
heads = 64;
sectors = 32;
cylinders = size / (heads * sectors);
......@@ -1489,12 +1284,8 @@ int dc395x_bios_param(struct scsi_device *sdev,
}
/*
* DC395x register dump
*/
static
void dump_register_info(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
static void dump_register_info(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
u16 pstat;
struct pci_dev *dev = acb->dev;
......@@ -1504,7 +1295,7 @@ void dump_register_info(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (!srb && dcb)
srb = dcb->active_srb;
if (srb) {
if (!(srb->cmd))
if (!srb->cmd)
dprintkl(KERN_INFO, "dump: SRB %p: cmd %p OOOPS!\n", srb,
srb->cmd);
else
......@@ -1560,8 +1351,6 @@ void dump_register_info(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
DC395x_read8(acb, TRM_S1040_GEN_STATUS),
DC395x_read8(acb, TRM_S1040_GEN_TIMER));
dprintkl(KERN_INFO, "dump: PCI Status %04x\n", pstat);
}
......@@ -1585,13 +1374,6 @@ static inline void clear_fifo(struct AdapterCtlBlk *acb, char *txt)
}
/*
********************************************************************
*
* DC395x_reset scsi_reset_detect
*
********************************************************************
*/
static void reset_dev_param(struct AdapterCtlBlk *acb)
{
struct DeviceCtlBlk *dcb;
......@@ -1616,22 +1398,16 @@ static void reset_dev_param(struct AdapterCtlBlk *acb)
/*
*********************************************************************
* Function : int dc395x_eh_bus_reset(Scsi_Cmnd *cmd)
* Purpose : perform a hard reset on the SCSI bus
* Inputs : cmd - some command for this host (for fetching hooks)
* Returns : SUCCESS (0x2002) on success, else FAILED (0x2003).
*********************************************************************
* perform a hard reset on the SCSI bus
* @cmd - some command for this host (for fetching hooks)
* Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
*/
static int dc395x_eh_bus_reset(Scsi_Cmnd * cmd)
{
struct AdapterCtlBlk *acb;
/*u32 acb_flags=0; */
dprintkl(KERN_INFO, "reset requested!\n");
acb = (struct AdapterCtlBlk *) cmd->device->host->hostdata;
/* mid level guarantees no recursion */
/*DC395x_ACB_LOCK(acb,acb_flags); */
acb = (struct AdapterCtlBlk *)cmd->device->host->hostdata;
if (timer_pending(&acb->waiting_timer))
del_timer(&acb->waiting_timer);
......@@ -1664,33 +1440,27 @@ static int dc395x_eh_bus_reset(Scsi_Cmnd * cmd)
reset_dev_param(acb);
doing_srb_done(acb, DID_RESET, cmd, 0);
acb->active_dcb = NULL;
acb->acb_flag = 0; /* RESET_DETECT, RESET_DONE ,RESET_DEV */
waiting_process_next(acb);
/*DC395x_ACB_LOCK(acb,acb_flags); */
return SUCCESS;
}
/*
*********************************************************************
* Function : int dc395x_eh_abort(Scsi_Cmnd *cmd)
* Purpose : abort an errant SCSI command
* Inputs : cmd - command to be aborted
* Returns : SUCCESS (0x2002) on success, else FAILED (0x2003).
*********************************************************************
* abort an errant SCSI command
* @cmd - command to be aborted
* Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
*/
static int dc395x_eh_abort(Scsi_Cmnd * cmd)
static int dc395x_eh_abort(Scsi_Cmnd *cmd)
{
/*
* Look into our command queues: If it has not been sent already,
* we remove it and return success. Otherwise fail.
*/
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *) cmd->device->host->hostdata;
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
......@@ -1729,8 +1499,7 @@ static int dc395x_eh_abort(Scsi_Cmnd * cmd)
/* SDTR */
static
void build_sdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
static void build_sdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
u8 *ptr = srb->msgout_buf + srb->msg_count;
......@@ -1758,15 +1527,12 @@ void build_sdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
}
/* SDTR */
static
void build_wdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
/* WDTR */
static void build_wdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
u8 wide =
((dcb->dev_mode & NTC_DO_WIDE_NEGO) & (acb->
config & HCC_WIDE_CARD))
? 1 : 0;
u8 wide = ((dcb->dev_mode & NTC_DO_WIDE_NEGO) &
(acb->config & HCC_WIDE_CARD)) ? 1 : 0;
u8 *ptr = srb->msgout_buf + srb->msg_count;
if (srb->msg_count > 1) {
dprintkl(KERN_INFO,
......@@ -1809,7 +1575,7 @@ static void selto_timer(struct AdapterCtlBlk *acb)
void selection_timeout_missed(unsigned long ptr)
{
unsigned long flags;
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *) ptr;
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
struct ScsiReqBlk *srb;
dprintkl(KERN_DEBUG, "Chip forgot to produce SelTO IRQ!\n");
if (!acb->active_dcb || !acb->active_dcb->active_srb) {
......@@ -1825,13 +1591,7 @@ void selection_timeout_missed(unsigned long ptr)
#endif
/*
* scsiio
* DC395x_DoWaitingSRB srb_done
* send_srb request_sense
*/
static
u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
static u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
struct ScsiReqBlk * srb)
{
u16 s_stat2, return_code;
......@@ -1939,9 +1699,7 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
}
srb->msg_count = 0;
}
/*
** Send identify message
*/
/* Send identify message */
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, identify_message);
scsicommand = SCMD_SEL_ATN;
......@@ -1967,9 +1725,7 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
DO_HWRESELECT);
return 1;
}
/*
** Send Tag id
*/
/* Send Tag id */
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_SIMPLE_QTAG);
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, tag_number);
dcb->tag_mask |= tag_mask;
......@@ -1981,9 +1737,7 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
}
#endif
/*polling:*/
/*
* Send CDB ..command block .........
*/
/* Send CDB ..command block ......... */
dprintkdbg(DBG_KG,
"StartSCSI (pid %li) %02x (%i-%i): Tag %i\n",
srb->cmd->pid, srb->cmd->cmnd[0],
......@@ -1998,7 +1752,7 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
sizeof(srb->cmd->sense_buffer));
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0);
} else {
ptr = (u8 *) srb->cmd->cmnd;
ptr = (u8 *)srb->cmd->cmnd;
for (i = 0; i < srb->cmd->cmd_len; i++)
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
}
......@@ -2013,8 +1767,8 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
*/
dprintkdbg(DBG_0, "Debug: StartSCSI failed (busy) for pid %li(%02i-%i)!\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun);
/*clear_fifo (acb, "Start2"); */
/*DC395x_write16 (TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
/*clear_fifo(acb, "Start2"); */
/*DC395x_write16(TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
srb->state = SRB_READY;
free_tag(dcb, srb);
srb->msg_count = 0;
......@@ -2032,9 +1786,7 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
/* it's important for atn stop */
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
DO_DATALATCH | DO_HWRESELECT);
/*
** SCSI command
*/
/* SCSI command */
TRACEPRINTF("%02x *", scsicommand);
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, scsicommand);
}
......@@ -2042,13 +1794,6 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
}
/*
********************************************************************
* scsiio
* init_adapter
********************************************************************
*/
/**
* dc395x_handle_interrupt - Handle an interrupt that has been confirmed to
* have been triggered for this card.
......@@ -2056,14 +1801,15 @@ u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
* @acb: a pointer to the adpter control block
* @scsi_status: the status return when we checked the card
**/
static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb, u16 scsi_status)
static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
u16 scsi_status)
{
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
u16 phase;
u8 scsi_intstatus;
unsigned long flags;
void (*dc395x_statev) (struct AdapterCtlBlk *, struct ScsiReqBlk *,
void (*dc395x_statev)(struct AdapterCtlBlk *, struct ScsiReqBlk *,
u16 *);
DC395x_LOCK_IO(acb->scsi_host, flags);
......@@ -2081,7 +1827,6 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb, u16 scsi_status)
monitor_next_irq--;
}
#endif
/*DC395x_ACB_LOCK(acb,acb_flags); */
if (debug_enabled(DBG_KG)) {
if (scsi_intstatus & INT_SELTIMEOUT)
dprintkdbg(DBG_KG, "Sel Timeout IRQ\n");
......@@ -2120,12 +1865,10 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb, u16 scsi_status)
dprintkdbg(DBG_0, "MsgOut Abort Device.....\n");
enable_msgout_abort(acb, srb);
}
/*
************************************************************
* software sequential machine
************************************************************
*/
phase = (u16) srb->scsi_phase;
/* software sequential machine */
phase = (u16)srb->scsi_phase;
/*
* 62037 or 62137
* call dc395x_scsi_phase0[]... "phase entry"
......@@ -2139,22 +1882,20 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb, u16 scsi_status)
/* nop0, phase:5 PH_BUS_FREE .. initial phase */
/* msgout_phase0, phase:6 */
/* msgin_phase0, phase:7 */
dc395x_statev = (void *) dc395x_scsi_phase0[phase];
dc395x_statev = dc395x_scsi_phase0[phase];
dc395x_statev(acb, srb, &scsi_status);
/*
*$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
*
* if there were any exception occured
* scsi_status will be modify to bus free phase
* new scsi_status transfer out from ... previous dc395x_statev
*
*$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
* if there were any exception occured scsi_status
* will be modify to bus free phase new scsi_status
* transfer out from ... previous dc395x_statev
*/
srb->scsi_phase = scsi_status & PHASEMASK;
phase = (u16) scsi_status & PHASEMASK;
phase = (u16)scsi_status & PHASEMASK;
/*
* call dc395x_scsi_phase1[]... "phase entry"
* handle every phase do transfer
* call dc395x_scsi_phase1[]... "phase entry" handle
* every phase to do transfer
*/
/* data_out_phase1, phase:0 */
/* data_in_phase1, phase:1 */
......@@ -2164,29 +1905,23 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb, u16 scsi_status)
/* nop1, phase:5 PH_BUS_FREE .. initial phase */
/* msgout_phase1, phase:6 */
/* msgin_phase1, phase:7 */
dc395x_statev = (void *) dc395x_scsi_phase1[phase];
dc395x_statev = dc395x_scsi_phase1[phase];
dc395x_statev(acb, srb, &scsi_status);
}
out_unlock:
DC395x_UNLOCK_IO(acb->scsi_host, flags);
return;
}
static
irqreturn_t dc395x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
static irqreturn_t dc395x_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)dev_id;
u16 scsi_status;
u8 dma_status;
irqreturn_t handled = IRQ_NONE;
dprintkdbg(DBG_0, "dc395x_interrupt..............\n");
#if debug_enabled(DBG_RECURSION)
if (dbg_in_driver++ > NORM_REC_LVL) {
dprintkl(KERN_DEBUG, "%i interrupt recursion?\n", dbg_in_driver);
}
#endif
dprintkdbg(DBG_0, "dc395x_interrupt...\n");
/*
* Check for pending interupt
......@@ -2216,54 +1951,31 @@ irqreturn_t dc395x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
handled = IRQ_HANDLED;
}
#if debug_enabled(DBG_RECURSION)
dbg_in_driver--
#endif
return handled;
}
/*
********************************************************************
* scsiio
* msgout_phase0: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =6
********************************************************************
*/
static
void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "msgout_phase0.....\n");
if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT)) {
dprintkdbg(DBG_0, "msgout_phase0...\n");
if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
}
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
srb->state &= ~SRB_MSGOUT;
TRACEPRINTF("MOP0 *");
}
/*
********************************************************************
* scsiio
* msgout_phase1: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =6
********************************************************************
*/
static
void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
u16 i;
u8 *ptr;
struct DeviceCtlBlk *dcb;
dprintkdbg(DBG_0, "msgout_phase1..............\n");
dprintkdbg(DBG_0, "msgout_phase1...\n");
TRACEPRINTF("MOP1*");
dcb = acb->active_dcb;
clear_fifo(acb, "MOP1");
if (!(srb->state & SRB_MSGOUT)) {
srb->state |= SRB_MSGOUT;
......@@ -2279,72 +1991,49 @@ void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
TRACEOUT(" %s\n", srb->debugtrace);
return;
}
ptr = (u8 *) srb->msgout_buf;
ptr = (u8 *)srb->msgout_buf;
TRACEPRINTF("(*");
/*dprintkl(KERN_DEBUG, "Send msg: "); print_msg (ptr, srb->msg_count); */
/*dprintkl(KERN_DEBUG, "MsgOut: "); */
for (i = 0; i < srb->msg_count; i++) {
TRACEPRINTF("%02x *", *ptr);
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
}
TRACEPRINTF(")*");
srb->msg_count = 0;
/*printk("\n"); */
if (/*(dcb->flag & ABORT_DEV_) && */
(srb->msgout_buf[0] == MSG_ABORT))
srb->state = SRB_ABORT_SENT;
/*1.25 */
/*DC395x_write16 (TRM_S1040_SCSI_CONTROL, DO_DATALATCH); *//* it's important for atn stop */
/*
** SCSI command
*/
/* SCSI command */
/*TRACEPRINTF (".*"); */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
}
/*
********************************************************************
* scsiio
* command_phase0: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =2
********************************************************************
*/
static
void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
TRACEPRINTF("COP0 *");
/*1.25 */
/*clear_fifo (acb, COP0); */
/*clear_fifo(acb, COP0); */
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
}
/*
********************************************************************
* scsiio
* command_phase1: one of dc395x_scsi_phase1[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase1[phase]
* if phase =2
********************************************************************
*/
static
void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
struct DeviceCtlBlk *dcb;
u8 *ptr;
u16 i;
dprintkdbg(DBG_0, "command_phase1..............\n");
dprintkdbg(DBG_0, "command_phase1...\n");
TRACEPRINTF("COP1*");
clear_fifo(acb, "COP1");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
if (!(srb->flag & AUTO_REQSENSE)) {
ptr = (u8 *) srb->cmd->cmnd;
ptr = (u8 *)srb->cmd->cmnd;
for (i = 0; i < srb->cmd->cmd_len; i++) {
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr);
ptr++;
......@@ -2440,11 +2129,11 @@ static void update_sg_list(struct ScsiReqBlk *srb, u32 left)
return;
}
/* We have to walk the scatterlist to find it */
sg = (struct scatterlist *) cmd->request_buffer;
sg = (struct scatterlist *)cmd->request_buffer;
while (segment--) {
/*printk("(%08x)%p ", BUS_ADDR(*sg), PAGE_ADDRESS(sg)); */
unsigned long mask =
~((unsigned long) sg->length - 1) & PAGE_MASK;
~((unsigned long)sg->length - 1) & PAGE_MASK;
if ((BUS_ADDR(*sg) & mask) == (psge->address & mask)) {
srb->virt_addr = (PAGE_ADDRESS(sg)
+ psge->address -
......@@ -2467,8 +2156,7 @@ static void update_sg_list(struct ScsiReqBlk *srb, u32 left)
* Should probably also be called from other places
* Best might be to call it in DataXXPhase0, if new phase will differ
*/
static
void cleanup_after_transfer(struct AdapterCtlBlk *acb,
static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb)
{
TRACEPRINTF(" Cln*");
......@@ -2476,18 +2164,14 @@ void cleanup_after_transfer(struct AdapterCtlBlk *acb,
if (DC395x_read16(acb, TRM_S1040_DMA_COMMAND) & 0x0001) { /* read */
if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
clear_fifo(acb, "ClnIn");
if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
} else { /* write */
if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
clear_fifo(acb, "ClnOut");
}
/*1.25 */
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
}
......@@ -2497,26 +2181,17 @@ void cleanup_after_transfer(struct AdapterCtlBlk *acb,
* Seems to be needed for unknown reasons; could be a hardware bug :-(
*/
#define DC395x_LASTPIO 4
/*
********************************************************************
* scsiio
* data_out_phase0: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =0
********************************************************************
*/
static
void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
u16 scsi_status;
u32 d_left_counter = 0;
struct DeviceCtlBlk *dcb = srb->dcb;
u16 scsi_status = *pscsi_status;
u32 d_left_counter = 0;
dprintkdbg(DBG_0, "data_out_phase0.....\n");
dprintkdbg(DBG_0, "data_out_phase0...\n");
TRACEPRINTF("DOP0*");
dcb = srb->dcb;
scsi_status = *pscsi_status;
/*
* KG: We need to drain the buffers before we draw any conclusions!
......@@ -2554,7 +2229,7 @@ void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
* if there was some data left in SCSI FIFO
*/
d_left_counter =
(u32) (DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
(u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
0x1F);
if (dcb->sync_period & WIDE_SYNC)
d_left_counter <<= 1;
......@@ -2595,7 +2270,7 @@ void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
TRACEPRINTF("%06x *", d_left_counter);
/* Is this a good idea? */
/*clear_fifo (acb, "DOP1"); */
/*clear_fifo(acb, "DOP1"); */
/* KG: What is this supposed to be useful for? WIDE padding stuff? */
if (d_left_counter == 1 && dcb->sync_period & WIDE_SYNC
&& srb->cmd->request_bufflen % 2) {
......@@ -2613,8 +2288,8 @@ void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
* KG: This is nonsense: We have been WRITING data to the bus
* If the SCSI engine has no bytes left, how should the DMA engine?
*/
if ((d_left_counter ==
0) /*|| (scsi_status & SCSIXFERCNT_2_ZERO) ) */ ) {
if (d_left_counter == 0
/*|| (scsi_status & SCSIXFERCNT_2_ZERO)*/) {
/*
* int ctr = 6000000; u8 TempDMAstatus;
* do
......@@ -2661,8 +2336,8 @@ void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
srb->cmd->pid,
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f);
#endif
/*clear_fifo (acb, "DOP0"); */
/*DC395x_write8 (TRM_S1040_DMA_CONTROL, CLRXFIFO | ABORTXFER); */
/*clear_fifo(acb, "DOP0"); */
/*DC395x_write8(TRM_S1040_DMA_CONTROL, CLRXFIFO | ABORTXFER); */
#if 1
if ((*pscsi_status & PHASEMASK) != PH_DATA_OUT) {
/*dprintkl(KERN_DEBUG, "Debug: Clean up after Data Out ...\n"); */
......@@ -2673,52 +2348,28 @@ void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
/*
********************************************************************
* scsiio
* data_out_phase1: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =0
* 62037
********************************************************************
*/
static
void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "data_out_phase1.....\n");
dprintkdbg(DBG_0, "data_out_phase1...\n");
/*1.25 */
TRACEPRINTF("DOP1*");
clear_fifo(acb, "DOP1");
/*
** do prepare befor transfer when data out phase
*/
/* do prepare befor transfer when data out phase */
data_io_transfer(acb, srb, XFERDATAOUT);
TRACEPRINTF(".*");
}
/*
********************************************************************
* scsiio
* data_in_phase0: one of dc395x_scsi_phase1[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase1[phase]
* if phase =1
********************************************************************
*/
static
void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
u16 scsi_status;
u16 scsi_status = *pscsi_status;
u32 d_left_counter = 0;
/*struct DeviceCtlBlk* dcb = srb->dcb; */
/*u8 bval; */
dprintkdbg(DBG_0, "data_in_phase0..............\n");
dprintkdbg(DBG_0, "data_in_phase0...\n");
TRACEPRINTF("DIP0*");
scsi_status = *pscsi_status;
/*
* KG: DataIn is much more tricky than DataOut. When the device is finished
......@@ -2859,7 +2510,7 @@ void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
* if there was some data left in SCSI FIFO
*/
d_left_counter =
(u32) (DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
(u32)(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
0x1F);
if (srb->dcb->sync_period & WIDE_SYNC)
d_left_counter <<= 1;
......@@ -2882,7 +2533,7 @@ void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
#endif
/* KG: This should not be needed any more! */
if ((d_left_counter == 0)
if (d_left_counter == 0
|| (scsi_status & SCSIXFERCNT_2_ZERO)) {
#if 0
int ctr = 6000000;
......@@ -2929,7 +2580,7 @@ void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
"DIP0(%li): %i bytes in SCSI FIFO (stat %04x) (left %08x)!!\n",
srb->cmd->pid, bval & 0x1f, scsi_status,
d_left_counter);
if ((d_left_counter == 0)
if (d_left_counter == 0
|| (scsi_status & SCSIXFERCNT_2_ZERO)) {
dprintkl(KERN_DEBUG, "Clear FIFO!\n");
clear_fifo(acb, "DIP0");
......@@ -2937,52 +2588,32 @@ void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
#endif
/*DC395x_write8 (TRM_S1040_DMA_CONTROL, CLRXFIFO | ABORTXFER); */
/*clear_fifo (acb, "DIP0"); */
/*DC395x_write16 (TRM_S1040_SCSI_CONTROL, DO_DATALATCH); */
/*clear_fifo(acb, "DIP0"); */
/*DC395x_write16(TRM_S1040_SCSI_CONTROL, DO_DATALATCH); */
TRACEPRINTF(".*");
}
/*
********************************************************************
* scsiio
* data_in_phase1: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =1
********************************************************************
*/
static
void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "data_in_phase1.....\n");
dprintkdbg(DBG_0, "data_in_phase1...\n");
/* FIFO should be cleared, if previous phase was not DataPhase */
/*clear_fifo (acb, "DIP1"); */
/*clear_fifo(acb, "DIP1"); */
/* Allow data in! */
/*DC395x_write16 (TRM_S1040_SCSI_CONTROL, DO_DATALATCH); */
/*DC395x_write16(TRM_S1040_SCSI_CONTROL, DO_DATALATCH); */
TRACEPRINTF("DIP1:*");
/*
** do prepare before transfer when data in phase
*/
/* do prepare before transfer when data in phase */
data_io_transfer(acb, srb, XFERDATAIN);
TRACEPRINTF(".*");
}
/*
********************************************************************
* scsiio
* data_out_phase1
* data_in_phase1
********************************************************************
*/
static
void data_io_transfer(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 io_dir)
static void data_io_transfer(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb, u16 io_dir)
{
struct DeviceCtlBlk *dcb = srb->dcb;
u8 bval;
struct DeviceCtlBlk *dcb;
dprintkdbg(DBG_0, "DataIO_transfer %c (pid %li): len = %i, SG: %i/%i\n",
((io_dir & DMACMD_DIR) ? 'r' : 'w'), srb->cmd->pid,
......@@ -2990,10 +2621,8 @@ void data_io_transfer(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
srb->sg_count);
TRACEPRINTF("%05x(%i/%i)*", srb->total_xfer_length,
srb->sg_index, srb->sg_count);
dcb = srb->dcb;
if (srb == acb->tmp_srb) {
if (srb == acb->tmp_srb)
dprintkl(KERN_ERR, "Using tmp_srb in DataPhase!\n");
}
if (srb->sg_index < srb->sg_count) {
if (srb->total_xfer_length > DC395x_LASTPIO) {
u8 dma_status = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
......@@ -3007,7 +2636,7 @@ void data_io_transfer(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
DC395x_write8(acb, TRM_S1040_DMA_CONTROL,
CLRXFIFO);
}
/*clear_fifo (acb, "IO"); */
/* clear_fifo(acb, "IO"); */
/*
* load what physical address of Scatter/Gather list table want to be
* transfer
......@@ -3051,7 +2680,7 @@ void data_io_transfer(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
#if DC395x_LASTPIO
else if (srb->total_xfer_length > 0) { /* The last four bytes: Do PIO */
/*clear_fifo (acb, "IO"); */
/* clear_fifo(acb, "IO"); */
/*
* load what physical address of Scatter/Gather list table want to be
* transfer
......@@ -3111,7 +2740,6 @@ void data_io_transfer(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
#endif /* DC395x_LASTPIO */
else { /* xfer pad */
u8 data = 0, data2 = 0;
if (srb->sg_count) {
srb->adapter_status = H_OVER_UNDER_RUN;
......@@ -3159,31 +2787,18 @@ void data_io_transfer(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
srb->state |= SRB_XFERPAD;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
/*
* SCSI command
*/
/* SCSI command */
bval =
(io_dir & DMACMD_DIR) ? SCMD_FIFO_IN :
SCMD_FIFO_OUT;
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, bval);
}
}
/*monitor_next_irq = 2; */
/*printk(" done\n"); */
}
/*
********************************************************************
* scsiio
* status_phase0: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =3
********************************************************************
*/
static
void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "StatusPhase0 (pid %li)\n", srb->cmd->pid);
TRACEPRINTF("STP0 *");
......@@ -3192,26 +2807,15 @@ void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
srb->state = SRB_COMPLETED;
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
/*1.25 */
/*clear_fifo (acb, "STP0"); */
/*clear_fifo(acb, "STP0"); */
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
/*
** SCSI command
*/
/* SCSI command */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
}
/*
********************************************************************
* scsiio
* status_phase1: one of dc395x_scsi_phase1[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase1[phase]
* if phase =3
********************************************************************
*/
static
void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "StatusPhase1 (pid=%li)\n", srb->cmd->pid);
TRACEPRINTF("STP1 *");
......@@ -3220,13 +2824,10 @@ void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
srb->state = SRB_STATUS;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
/*
* SCSI command
*/
/* SCSI command */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
}
/* Message handling */
#if 0
/* Print received message */
......@@ -3240,6 +2841,7 @@ static void print_msg(u8 * msg_buf, u32 len)
}
#endif
/* Check if the message is complete */
static inline u8 msgin_completed(u8 * msgbuf, u32 len)
{
......@@ -3260,8 +2862,8 @@ static inline u8 msgin_completed(u8 * msgbuf, u32 len)
/* reject_msg */
static inline
void msgin_reject(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
static inline void msgin_reject(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb)
{
srb->msgout_buf[0] = MESSAGE_REJECT;
srb->msg_count = 1;
......@@ -3276,8 +2878,7 @@ void msgin_reject(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
/* abort command */
static inline
void enable_msgout_abort(struct AdapterCtlBlk *acb,
static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb)
{
srb->msgout_buf[0] = ABORT;
......@@ -3293,15 +2894,12 @@ void enable_msgout_abort(struct AdapterCtlBlk *acb,
}
static
struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb,
u8 tag)
static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb, u8 tag)
{
struct ScsiReqBlk *srb = NULL;
struct ScsiReqBlk *i;
dprintkdbg(DBG_0, "QTag Msg (SRB %p): %i\n", srb, tag);
if (!(dcb->tag_mask & (1 << tag)))
dprintkl(KERN_DEBUG,
......@@ -3363,9 +2961,8 @@ struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
}
/* Reprogram registers */
static inline void
reprogram_regs(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
static inline void reprogram_regs(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
{
DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
......@@ -3375,10 +2972,10 @@ reprogram_regs(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
/* set async transfer mode */
static
void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
static void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
struct DeviceCtlBlk *dcb = srb->dcb;
dprintkl(KERN_DEBUG, "Target %02i: No sync transfers\n", dcb->target_id);
TRACEPRINTF("!S *");
dcb->sync_mode &= ~(SYNC_NEGO_ENABLE);
......@@ -3398,14 +2995,11 @@ void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
/* set sync transfer mode */
static
void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
struct DeviceCtlBlk *dcb = srb->dcb;
u8 bval;
int fact;
struct DeviceCtlBlk *dcb = srb->dcb;
/*u8 oldsyncperiod = dcb->sync_period; */
/*u8 oldsyncoffset = dcb->sync_offset; */
dprintkdbg(DBG_1, "Target %02i: Sync: %ins (%02i.%01i MHz) Offset %i\n",
dcb->target_id, srb->msgin_buf[3] << 2,
......@@ -3475,11 +3069,11 @@ void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
}
static inline
void msgin_set_nowide(struct AdapterCtlBlk *acb,
static inline void msgin_set_nowide(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb)
{
struct DeviceCtlBlk *dcb = srb->dcb;
dprintkdbg(DBG_KG, "WDTR got rejected from target %02i\n",
dcb->target_id);
TRACEPRINTF("!W *");
......@@ -3496,12 +3090,12 @@ void msgin_set_nowide(struct AdapterCtlBlk *acb,
}
}
static
void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
static void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
struct DeviceCtlBlk *dcb = srb->dcb;
u8 wide = (dcb->dev_mode & NTC_DO_WIDE_NEGO
&& acb->config & HCC_WIDE_CARD) ? 1 : 0;
if (srb->msgin_buf[3] > wide)
srb->msgin_buf[3] = wide;
/* Completed */
......@@ -3537,12 +3131,6 @@ void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
/*
********************************************************************
* scsiio
* msgin_phase0: one of dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* if phase =7
*
* extended message codes:
*
* code description
......@@ -3553,24 +3141,18 @@ void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
* 03h WIDE DATA TRANSFER REQUEST
* 04h - 7Fh Reserved
* 80h - FFh Vendor specific
*
********************************************************************
*/
static
void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
struct DeviceCtlBlk *dcb;
struct DeviceCtlBlk *dcb = acb->active_dcb;
dprintkdbg(DBG_0, "msgin_phase0..............\n");
dprintkdbg(DBG_0, "msgin_phase0...\n");
TRACEPRINTF("MIP0*");
dcb = acb->active_dcb;
srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
TRACEPRINTF("(%02x)*", srb->msgin_buf[0]);
/*dprintkl(KERN_INFO, "MsgIn:"); */
/*print_msg (srb->msgin_buf, acb->msg_len); */
/* Now eval the msg */
switch (srb->msgin_buf[0]) {
......@@ -3613,7 +3195,9 @@ void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
break;
}
/* WDTR */
if (srb->msgin_buf[1] == 2 && srb->msgin_buf[2] == EXTENDED_WDTR && srb->msgin_buf[3] <= 2) { /* sanity check ... */
if (srb->msgin_buf[1] == 2
&& srb->msgin_buf[2] == EXTENDED_WDTR
&& srb->msgin_buf[3] <= 2) { /* sanity check ... */
msgin_set_wide(acb, srb);
break;
}
......@@ -3688,19 +3272,10 @@ void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
/*
********************************************************************
* scsiio
* msgin_phase1: one of dc395x_scsi_phase1[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase1[phase]
* if phase =7
********************************************************************
*/
static
void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "msgin_phase1..............\n");
dprintkdbg(DBG_0, "msgin_phase1...\n");
TRACEPRINTF("MIP1 *");
clear_fifo(acb, "MIP1");
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
......@@ -3709,61 +3284,30 @@ void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
srb->state |= SRB_MSGIN;
}
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
/*
* SCSI command
*/
/* SCSI command */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_IN);
}
/*
********************************************************************
* scsiio
* nop0: one of dc395x_scsi_phase1[] ,dc395x_scsi_phase0[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* dc395x_statev = (void *)dc395x_scsi_phase1[phase]
* if phase =4 ..PH_BUS_FREE
********************************************************************
*/
static
void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void nop0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
/*TRACEPRINTF("NOP0 *"); */
}
/*
********************************************************************
* scsiio
* nop1: one of dc395x_scsi_phase0[] ,dc395x_scsi_phase1[] vectors
* dc395x_statev = (void *)dc395x_scsi_phase0[phase]
* dc395x_statev = (void *)dc395x_scsi_phase1[phase]
* if phase =5
********************************************************************
*/
static
void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 * pscsi_status)
static void nop1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
/*TRACEPRINTF("NOP1 *"); */
}
/*
********************************************************************
* scsiio
* msgin_phase0
********************************************************************
*/
static
void set_xfer_rate(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
static void set_xfer_rate(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
{
struct DeviceCtlBlk *i;
/*
* set all lun device's period , offset
*/
/* set all lun device's period, offset */
if (dcb->identify_msg & 0x07)
return;
......@@ -3782,19 +3326,11 @@ void set_xfer_rate(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
}
/*
********************************************************************
* scsiio
* dc395x_interrupt
********************************************************************
*/
static void disconnect(struct AdapterCtlBlk *acb)
{
struct DeviceCtlBlk *dcb;
struct DeviceCtlBlk *dcb = acb->active_dcb;
struct ScsiReqBlk *srb;
dprintkdbg(DBG_0, "Disconnect (pid=%li)\n", acb->active_dcb->active_srb->cmd->pid);
dcb = acb->active_dcb;
if (!dcb) {
dprintkl(KERN_ERR, "Disc: Exception Disconnect dcb=NULL !!\n ");
udelay(500);
......@@ -3808,6 +3344,7 @@ static void disconnect(struct AdapterCtlBlk *acb)
}
srb = dcb->active_srb;
acb->active_dcb = NULL;
dprintkdbg(DBG_0, "Disconnect (pid=%li)\n", srb->cmd->pid);
TRACEPRINTF("DISC *");
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
......@@ -3819,7 +3356,6 @@ static void disconnect(struct AdapterCtlBlk *acb)
srb->state = 0;
waiting_process_next(acb);
} else if (srb->state & SRB_ABORT_SENT) {
/*Scsi_Cmnd* cmd = srb->cmd; */
dcb->flag &= ~ABORT_DEV_;
acb->scsi_host->last_reset = jiffies + HZ / 2 + 1;
dprintkl(KERN_ERR, "Disc: SRB_ABORT_SENT!\n");
......@@ -3893,31 +3429,23 @@ static void disconnect(struct AdapterCtlBlk *acb)
srb_done(acb, dcb, srb);
}
}
return;
}
/*
********************************************************************
* scsiio
* reselect
********************************************************************
*/
static void reselect(struct AdapterCtlBlk *acb)
{
struct DeviceCtlBlk *dcb;
struct DeviceCtlBlk *dcb = acb->active_dcb;
struct ScsiReqBlk *srb = NULL;
u16 rsel_tar_lun_id;
u8 id, lun;
u8 arblostflag = 0;
dprintkdbg(DBG_0, "reselect..............\n");
dprintkdbg(DBG_0, "reselect...\n");
clear_fifo(acb, "Resel");
/*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
/* Read Reselected Target ID and LUN */
rsel_tar_lun_id = DC395x_read16(acb, TRM_S1040_SCSI_TARGETID);
dcb = acb->active_dcb;
if (dcb) { /* Arbitration lost but Reselection win */
srb = dcb->active_srb;
if (!srb) {
......@@ -3926,7 +3454,7 @@ static void reselect(struct AdapterCtlBlk *acb)
return;
}
/* Why the if ? */
if (!(acb->scan_devices)) {
if (!acb->scan_devices) {
dprintkdbg(DBG_KG,
"Arb lost but Resel win pid %li (%02i-%i) Rsel %04x Stat %04x\n",
srb->cmd->pid, dcb->target_id,
......@@ -3965,7 +3493,7 @@ static void reselect(struct AdapterCtlBlk *acb)
dprintkl(KERN_DEBUG, "Reselection in spite of forbidden disconnection? (%02i-%i)\n",
dcb->target_id, dcb->target_lun);
if ((dcb->sync_mode & EN_TAG_QUEUEING) /*&& !arblostflag */ ) {
if (dcb->sync_mode & EN_TAG_QUEUEING /*&& !arblostflag */) {
struct ScsiReqBlk *oldSRB = srb;
srb = acb->tmp_srb;
#if debug_enabled(DBG_TRACE|DBG_TRACEALL)
......@@ -4003,11 +3531,8 @@ static void reselect(struct AdapterCtlBlk *acb)
/*if (arblostflag) TRACEOUT (" %s\n", srb->debugtrace); */
}
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
/*
***********************************************
** Program HA ID, target ID, period and offset
***********************************************
*/
/* Program HA ID, target ID, period and offset */
DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id); /* host ID */
DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id); /* target ID */
DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset); /* offset */
......@@ -4018,10 +3543,6 @@ static void reselect(struct AdapterCtlBlk *acb)
}
static inline u8 tagq_blacklist(char *name)
{
#ifndef DC395x_NO_TAGQ
......@@ -4038,8 +3559,7 @@ static inline u8 tagq_blacklist(char *name)
}
static
void disc_tagq_set(struct DeviceCtlBlk *dcb, struct ScsiInqData *ptr)
static void disc_tagq_set(struct DeviceCtlBlk *dcb, struct ScsiInqData *ptr)
{
/* Check for SCSI format (ANSI and Response data format) */
if ((ptr->Vers & 0x07) >= 2 || (ptr->RDF & 0x0F) == 2) {
......@@ -4048,7 +3568,7 @@ void disc_tagq_set(struct DeviceCtlBlk *dcb, struct ScsiInqData *ptr)
/*(dcb->dev_mode & NTC_DO_DISCONNECT) */
/* ((dcb->dev_type == TYPE_DISK)
|| (dcb->dev_type == TYPE_MOD)) && */
!tagq_blacklist(((char *) ptr) + 8)) {
!tagq_blacklist(((char *)ptr) + 8)) {
if (dcb->max_command == 1)
dcb->max_command =
dcb->acb->tag_max_num;
......@@ -4060,8 +3580,7 @@ void disc_tagq_set(struct DeviceCtlBlk *dcb, struct ScsiInqData *ptr)
}
static
void add_dev(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
static void add_dev(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiInqData *ptr)
{
u8 bval1 = ptr->DevType & SCSI_DEVTYPE;
......@@ -4071,17 +3590,11 @@ void add_dev(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
}
/*
********************************************************************
* unmap mapped pci regions from SRB
********************************************************************
*/
static
void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
/* unmap mapped pci regions from SRB */
static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
int dir;
Scsi_Cmnd *cmd = srb->cmd;
dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
int dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
if (cmd->use_sg && dir != PCI_DMA_NONE) {
/* unmap DC395x SG list */
dprintkdbg(DBG_SGPARANOIA,
......@@ -4096,7 +3609,7 @@ void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
cmd->use_sg, cmd->request_buffer);
/* unmap the sg segments */
pci_unmap_sg(acb->dev,
(struct scatterlist *) cmd->request_buffer,
(struct scatterlist *)cmd->request_buffer,
cmd->use_sg, dir);
} else if (cmd->request_buffer && dir != PCI_DMA_NONE) {
dprintkdbg(DBG_SGPARANOIA, "Unmap buffer at %08x (%05x)\n",
......@@ -4107,13 +3620,9 @@ void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
}
/*
********************************************************************
* unmap mapped pci sense buffer from SRB
********************************************************************
*/
static
void pci_unmap_srb_sense(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
/* unmap mapped pci sense buffer from SRB */
static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb)
{
if (!(srb->flag & AUTO_REQSENSE))
return;
......@@ -4133,31 +3642,24 @@ void pci_unmap_srb_sense(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
/*
********************************************************************
* scsiio
* disconnect
* Complete execution of a SCSI command
* Signal completion to the generic SCSI driver
********************************************************************
*/
static
void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
u8 tempcnt, status;
Scsi_Cmnd *cmd;
Scsi_Cmnd *cmd = srb->cmd;
struct ScsiInqData *ptr;
/*u32 drv_flags=0; */
int dir;
cmd = srb->cmd;
TRACEPRINTF("DONE *");
dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
ptr = (struct ScsiInqData *) (cmd->request_buffer);
ptr = (struct ScsiInqData *)(cmd->request_buffer);
if (cmd->use_sg)
ptr =
(struct ScsiInqData *) CPU_ADDR(*(struct scatterlist *)
(struct ScsiInqData *)CPU_ADDR(*(struct scatterlist *)
ptr);
dprintkdbg(DBG_SGPARANOIA,
"SRBdone SG=%i (%i/%i), req_buf = %p, adr = %p\n",
......@@ -4214,13 +3716,13 @@ void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
"Sense=%02x, ASC=%02x, ASCQ=%02x (%08x %08x) ",
cmd->sense_buffer[2], cmd->sense_buffer[12],
cmd->sense_buffer[13],
*((unsigned int *) (cmd->sense_buffer + 3)),
*((unsigned int *) (cmd->sense_buffer + 8)));
*((unsigned int *)(cmd->sense_buffer + 3)),
*((unsigned int *)(cmd->sense_buffer + 8)));
else
dprintkl(KERN_DEBUG,
"Sense=%02x, No ASC/ASCQ (%08x) ",
cmd->sense_buffer[2],
*((unsigned int *) (cmd->sense_buffer + 3)));
*((unsigned int *)(cmd->sense_buffer + 3)));
}
if (status == (CHECK_CONDITION << 1)) {
......@@ -4229,8 +3731,8 @@ void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
}
dprintkdbg(DBG_0, "AUTO_REQSENSE2..............\n");
if ((srb->total_xfer_length)
&& (srb->total_xfer_length >= cmd->underflow))
if (srb->total_xfer_length
&& srb->total_xfer_length >= cmd->underflow)
cmd->result =
MK_RES_LNX(DRIVER_SENSE, DID_OK,
srb->end_message, CHECK_CONDITION);
......@@ -4299,7 +3801,7 @@ void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (dir != PCI_DMA_NONE) {
if (cmd->use_sg)
pci_dma_sync_sg(acb->dev,
(struct scatterlist *) cmd->
(struct scatterlist *)cmd->
request_buffer, cmd->use_sg, dir);
else if (cmd->request_buffer)
pci_dma_sync_single(acb->dev,
......@@ -4360,20 +3862,12 @@ void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
TRACEOUTALL(KERN_INFO " %s\n", srb->debugtrace);
waiting_process_next(acb);
return;
}
/*
********************************************************************
* scsiio
* DC395x_reset
* abort all cmds in our queues
********************************************************************
*/
static
void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
Scsi_Cmnd * cmd, u8 force)
/* abort all cmds in our queues */
static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
Scsi_Cmnd *cmd, u8 force)
{
struct DeviceCtlBlk *dcb;
......@@ -4459,30 +3953,17 @@ void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
}
/*
********************************************************************
* scsiio
* DC395x_shutdown DC395x_reset
********************************************************************
*/
static void reset_scsi_bus(struct AdapterCtlBlk *acb)
{
/*u32 drv_flags=0; */
dprintkdbg(DBG_0, "reset_scsi_bus..............\n");
/*DC395x_DRV_LOCK(drv_flags); */
dprintkdbg(DBG_0, "reset_scsi_bus...\n");
acb->acb_flag |= RESET_DEV; /* RESET_DETECT, RESET_DONE, RESET_DEV */
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
while (!(DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET));
/*DC395x_DRV_UNLOCK(drv_flags); */
return;
while (!(DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS) & INT_SCSIRESET))
/* nothing */;
}
/* Set basic config */
static void set_basic_config(struct AdapterCtlBlk *acb)
{
u8 bval;
......@@ -4520,12 +4001,6 @@ static void set_basic_config(struct AdapterCtlBlk *acb)
}
/*
********************************************************************
* scsiio
* dc395x_interrupt
********************************************************************
*/
static void scsi_reset_detect(struct AdapterCtlBlk *acb)
{
dprintkl(KERN_INFO, "scsi_reset_detect\n");
......@@ -4558,24 +4033,14 @@ static void scsi_reset_detect(struct AdapterCtlBlk *acb)
acb->acb_flag = 0;
waiting_process_next(acb);
}
return;
}
/*
********************************************************************
* scsiio
* srb_done
********************************************************************
*/
static
void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
Scsi_Cmnd *cmd;
Scsi_Cmnd *cmd = srb->cmd;
cmd = srb->cmd;
dprintkdbg(DBG_KG,
"request_sense for pid %li, target %02i-%i\n",
cmd->pid, cmd->device->id, cmd->device->lun);
......@@ -4618,9 +4083,6 @@ void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
}
/**
* device_alloc - Allocate a new device instance. This create the
* devices instance and sets up all the data items. The adapter
......@@ -4634,8 +4096,8 @@ void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
*
* Return the new device if succesfull or NULL on failure.
**/
static
struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb, u8 target, u8 lun)
static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
u8 target, u8 lun)
{
struct NvRamType *eeprom = &acb->eeprom;
u8 period_index = eeprom->target[target].period & 0x07;
......@@ -4643,9 +4105,8 @@ struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb, u8 target, u8 lun)
dcb = dc395x_kmalloc(sizeof(struct DeviceCtlBlk), GFP_ATOMIC);
dprintkdbg(DBG_0, "device_alloc: device %p\n", dcb);
if (!dcb) {
if (!dcb)
return NULL;
}
dcb->acb = NULL;
INIT_LIST_HEAD(&dcb->srb_going_list);
INIT_LIST_HEAD(&dcb->srb_waiting_list);
......@@ -4704,8 +4165,8 @@ struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb, u8 target, u8 lun)
* @acb: The adapter device to be updated
* @dcb: A newly created and intialised device instance to add.
**/
static
void adapter_add_device(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
static void adapter_add_device(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
{
/* backpointer to adapter */
dcb->acb = acb;
......@@ -4732,8 +4193,8 @@ void adapter_add_device(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
* @acb: The adapter device to be updated
* @dcb: A device that has previously been added to the adapter.
**/
static
void adapter_remove_device(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
static void adapter_remove_device(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
{
struct DeviceCtlBlk *i;
struct DeviceCtlBlk *tmp;
......@@ -4767,8 +4228,8 @@ void adapter_remove_device(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
* @acb: The adapter device to be updated
* @dcb: A device that has previously been added to the adapter.
*/
static
void adapter_remove_and_free_device(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb)
static void adapter_remove_and_free_device(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
{
if (list_size(&dcb->srb_going_list) > 1) {
dprintkdbg(DBG_DCB, "adapter_remove_and_free_device: "
......@@ -4787,8 +4248,7 @@ void adapter_remove_and_free_device(struct AdapterCtlBlk *acb, struct DeviceCtlB
*
* @acb: The adapter from which all devices should be removed.
**/
static
void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
static void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
{
struct DeviceCtlBlk *dcb;
struct DeviceCtlBlk *tmp;
......@@ -4807,8 +4267,7 @@ void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
*
* @scsi_device: The new scsi device that we need to handle.
**/
static
int dc395x_slave_alloc(struct scsi_device *scsi_device)
static int dc395x_slave_alloc(struct scsi_device *scsi_device)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
struct DeviceCtlBlk *dcb;
......@@ -4828,8 +4287,7 @@ int dc395x_slave_alloc(struct scsi_device *scsi_device)
*
* @scsi_device: The new scsi device that we need to handle.
**/
static
void dc395x_slave_destroy(struct scsi_device *scsi_device)
static void dc395x_slave_destroy(struct scsi_device *scsi_device)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
struct DeviceCtlBlk *dcb = find_dcb(acb, scsi_device->id, scsi_device->lun);
......@@ -4847,14 +4305,12 @@ void dc395x_slave_destroy(struct scsi_device *scsi_device)
*
* @io_port: base I/O address
**/
static
void __init trms1040_wait_30us(u16 io_port)
static void __init trms1040_wait_30us(u16 io_port)
{
/* ScsiPortStallExecution(30); wait 30 us */
outb(5, io_port + TRM_S1040_GEN_TIMER);
while (!(inb(io_port + TRM_S1040_GEN_STATUS) & GTIMEOUT))
/* nothing */ ;
return;
}
......@@ -4866,8 +4322,7 @@ void __init trms1040_wait_30us(u16 io_port)
* @cmd: SB + op code (command) to send
* @addr: address to send
**/
static
void __init trms1040_write_cmd(u16 io_port, u8 cmd, u8 addr)
static void __init trms1040_write_cmd(u16 io_port, u8 cmd, u8 addr)
{
int i;
u8 send_data;
......@@ -4912,8 +4367,7 @@ void __init trms1040_write_cmd(u16 io_port, u8 cmd, u8 addr)
* @addr: offset into EEPROM
* @byte: bytes to write
**/
static
void __init trms1040_set_data(u16 io_port, u8 addr, u8 byte)
static void __init trms1040_set_data(u16 io_port, u8 addr, u8 byte)
{
int i;
u8 send_data;
......@@ -4967,10 +4421,9 @@ void __init trms1040_set_data(u16 io_port, u8 addr, u8 byte)
* @eeprom: the data to write
* @io_port: the base io port
**/
static
void __init trms1040_write_all(struct NvRamType *eeprom, u16 io_port)
static void __init trms1040_write_all(struct NvRamType *eeprom, u16 io_port)
{
u8 *b_eeprom = (u8 *) eeprom;
u8 *b_eeprom = (u8 *)eeprom;
u8 addr;
/* Enable SEEPROM */
......@@ -4983,9 +4436,8 @@ void __init trms1040_write_all(struct NvRamType *eeprom, u16 io_port)
trms1040_wait_30us(io_port);
/* write */
for (addr = 0; addr < 128; addr++, b_eeprom++) {
for (addr = 0; addr < 128; addr++, b_eeprom++)
trms1040_set_data(io_port, addr, *b_eeprom);
}
/* write disable */
trms1040_write_cmd(io_port, 0x04, 0x00);
......@@ -5009,8 +4461,7 @@ void __init trms1040_write_all(struct NvRamType *eeprom, u16 io_port)
*
* Returns the the byte read.
**/
static
u8 __init trms1040_get_data(u16 io_port, u8 addr)
static u8 __init trms1040_get_data(u16 io_port, u8 addr)
{
int i;
u8 read_byte;
......@@ -5048,10 +4499,9 @@ u8 __init trms1040_get_data(u16 io_port, u8 addr)
* @eeprom: where to store the data
* @io_port: the base io port
**/
static
void __init trms1040_read_all(struct NvRamType *eeprom, u16 io_port)
static void __init trms1040_read_all(struct NvRamType *eeprom, u16 io_port)
{
u8 *b_eeprom = (u8 *) eeprom;
u8 *b_eeprom = (u8 *)eeprom;
u8 addr;
/* Enable SEEPROM */
......@@ -5059,9 +4509,8 @@ void __init trms1040_read_all(struct NvRamType *eeprom, u16 io_port)
io_port + TRM_S1040_GEN_CONTROL);
/* read details */
for (addr = 0; addr < 128; addr++, b_eeprom++) {
for (addr = 0; addr < 128; addr++, b_eeprom++)
*b_eeprom = trms1040_get_data(io_port, addr);
}
/* Disable SEEPROM */
outb((inb(io_port + TRM_S1040_GEN_CONTROL) & ~EN_EEPROM),
......@@ -5080,10 +4529,9 @@ void __init trms1040_read_all(struct NvRamType *eeprom, u16 io_port)
* @eeprom: caller allocated strcuture to read the eeprom data into
* @io_port: io port to read from
**/
static
void __init check_eeprom(struct NvRamType *eeprom, u16 io_port)
static void __init check_eeprom(struct NvRamType *eeprom, u16 io_port)
{
u16 *w_eeprom = (u16 *) eeprom;
u16 *w_eeprom = (u16 *)eeprom;
u16 w_addr;
u16 cksum;
u32 d_addr;
......@@ -5092,7 +4540,7 @@ void __init check_eeprom(struct NvRamType *eeprom, u16 io_port)
trms1040_read_all(eeprom, io_port); /* read eeprom */
cksum = 0;
for (w_addr = 0, w_eeprom = (u16 *) eeprom; w_addr < 64;
for (w_addr = 0, w_eeprom = (u16 *)eeprom; w_addr < 64;
w_addr++, w_eeprom++)
cksum += *w_eeprom;
if (cksum != 0x1234) {
......@@ -5102,20 +4550,20 @@ void __init check_eeprom(struct NvRamType *eeprom, u16 io_port)
*/
dprintkl(KERN_WARNING,
"EEProm checksum error: using default values and options.\n");
eeprom->sub_vendor_id[0] = (u8) PCI_VENDOR_ID_TEKRAM;
eeprom->sub_vendor_id[1] = (u8) (PCI_VENDOR_ID_TEKRAM >> 8);
eeprom->sub_sys_id[0] = (u8) PCI_DEVICE_ID_TEKRAM_TRMS1040;
eeprom->sub_vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
eeprom->sub_vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
eeprom->sub_sys_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
eeprom->sub_sys_id[1] =
(u8) (PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
(u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
eeprom->sub_class = 0x00;
eeprom->vendor_id[0] = (u8) PCI_VENDOR_ID_TEKRAM;
eeprom->vendor_id[1] = (u8) (PCI_VENDOR_ID_TEKRAM >> 8);
eeprom->device_id[0] = (u8) PCI_DEVICE_ID_TEKRAM_TRMS1040;
eeprom->vendor_id[0] = (u8)PCI_VENDOR_ID_TEKRAM;
eeprom->vendor_id[1] = (u8)(PCI_VENDOR_ID_TEKRAM >> 8);
eeprom->device_id[0] = (u8)PCI_DEVICE_ID_TEKRAM_TRMS1040;
eeprom->device_id[1] =
(u8) (PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
(u8)(PCI_DEVICE_ID_TEKRAM_TRMS1040 >> 8);
eeprom->reserved = 0x00;
for (d_addr = 0, d_eeprom = (u32 *) eeprom->target;
for (d_addr = 0, d_eeprom = (u32 *)eeprom->target;
d_addr < 16; d_addr++, d_eeprom++)
*d_eeprom = 0x00000077; /* cfg3,cfg2,period,cfg0 */
......@@ -5130,7 +4578,7 @@ void __init check_eeprom(struct NvRamType *eeprom, u16 io_port)
eeprom_override(eeprom);
eeprom->cksum = 0x00;
for (w_addr = 0, cksum = 0, w_eeprom = (u16 *) eeprom;
for (w_addr = 0, cksum = 0, w_eeprom = (u16 *)eeprom;
w_addr < 63; w_addr++, w_eeprom++)
cksum += *w_eeprom;
......@@ -5145,16 +4593,13 @@ void __init check_eeprom(struct NvRamType *eeprom, u16 io_port)
}
/**
* print_eeprom_settings - output the eeprom settings
* to the kernel log so people can see what they were.
*
* @eeprom: The eeprom data strucutre to show details for.
**/
static
void __init print_eeprom_settings(struct NvRamType *eeprom)
static void __init print_eeprom_settings(struct NvRamType *eeprom)
{
dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
eeprom->scsi_id,
......@@ -5170,13 +4615,11 @@ void __init print_eeprom_settings(struct NvRamType *eeprom)
}
#if debug_enabled(DBG_TRACE|DBG_TRACEALL)
/*
* Memory for trace buffers
*/
static
void free_tracebufs(struct AdapterCtlBlk *acb)
static void free_tracebufs(struct AdapterCtlBlk *acb)
{
int i;
const unsigned bufs_per_page = PAGE_SIZE / DEBUGTRACEBUFSZ;
......@@ -5187,8 +4630,7 @@ void free_tracebufs(struct AdapterCtlBlk *acb)
}
static
int alloc_tracebufs(struct AdapterCtlBlk *acb)
static int alloc_tracebufs(struct AdapterCtlBlk *acb)
{
const unsigned mem_needed =
(DC395x_MAX_SRB_CNT + 1) * DEBUGTRACEBUFSZ;
......@@ -5226,9 +4668,9 @@ static void free_tracebufs(struct AdapterCtlBlk *acb) {}
static int alloc_tracebufs(struct AdapterCtlBlk *acb) { return 0; }
#endif
/* Free SG tables */
static
void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
{
int i;
const unsigned srbs_per_page = PAGE_SIZE/(DC395x_MAX_SG_LISTENTRY
......@@ -5243,8 +4685,7 @@ void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
/*
* Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
* should never cross a page boundary */
static
int __init adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
static int __init adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
{
const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
*DC395x_MAX_SG_LISTENTRY
......@@ -5292,8 +4733,7 @@ int __init adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
*
* @acb: The adapter to print the information for.
**/
static
void __init adapter_print_config(struct AdapterCtlBlk *acb)
static void __init adapter_print_config(struct AdapterCtlBlk *acb)
{
u8 bval;
......@@ -5337,8 +4777,7 @@ void __init adapter_print_config(struct AdapterCtlBlk *acb)
*
* @acb: The adapter to initialize.
**/
static
void __init adapter_init_params(struct AdapterCtlBlk *acb)
static void __init adapter_init_params(struct AdapterCtlBlk *acb)
{
struct NvRamType *eeprom = &acb->eeprom;
int i;
......@@ -5400,8 +4839,7 @@ void __init adapter_init_params(struct AdapterCtlBlk *acb)
*
* @host: The scsi host instance to fill in the values for.
**/
static
void __init adapter_init_scsi_host(struct Scsi_Host *host)
static void __init adapter_init_scsi_host(struct Scsi_Host *host)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
struct NvRamType *eeprom = &acb->eeprom;
......@@ -5495,8 +4933,8 @@ void __init adapter_init_chip(struct AdapterCtlBlk *acb)
* Returns 0 if the initialization succeeds, any other value on
* failure.
**/
static
int __init adapter_init(struct AdapterCtlBlk *acb, u32 io_port, u32 io_port_len, u8 irq)
static int __init adapter_init(struct AdapterCtlBlk *acb, u32 io_port,
u32 io_port_len, u8 irq)
{
if (!request_region(io_port, io_port_len, DC395X_NAME)) {
dprintkl(KERN_ERR, "Failed to reserve IO region 0x%x\n", io_port);
......@@ -5562,8 +5000,7 @@ int __init adapter_init(struct AdapterCtlBlk *acb, u32 io_port, u32 io_port_len,
*
* @acb: The adapter which we are to shutdown.
**/
static
void adapter_uninit_chip(struct AdapterCtlBlk *acb)
static void adapter_uninit_chip(struct AdapterCtlBlk *acb)
{
/* disable interrupts */
DC395x_write8(acb, TRM_S1040_DMA_INTEN, 0);
......@@ -5586,8 +5023,7 @@ void adapter_uninit_chip(struct AdapterCtlBlk *acb)
*
* @acb: The adapter which we are to un-initialize.
**/
static
void adapter_uninit(struct AdapterCtlBlk *acb)
static void adapter_uninit(struct AdapterCtlBlk *acb)
{
unsigned long flags;
DC395x_LOCK_IO(acb->scsi_host, flags);
......@@ -5612,27 +5048,6 @@ void adapter_uninit(struct AdapterCtlBlk *acb)
}
/*
******************************************************************
* Function: dc395x_proc_info(char* buffer, char **start,
* off_t offset, int length, int hostno, int inout)
* Purpose: return SCSI Adapter/Device Info
* Input:
* buffer: Pointer to a buffer where to write info
* start :
* offset:
* hostno: Host adapter index
* inout : Read (=0) or set(!=0) info
* Output:
* buffer: contains info length
*
* return value: length of info in buffer
*
******************************************************************
*/
/* KG: dc395x_proc_info taken from driver aha152x.c */
#undef SPRINTF
#define SPRINTF(args...) pos += sprintf(pos, args)
......@@ -5641,9 +5056,8 @@ void adapter_uninit(struct AdapterCtlBlk *acb)
if (YN) SPRINTF(" Yes ");\
else SPRINTF(" No ")
static
int dc395x_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length,
int inout)
static int dc395x_proc_info(struct Scsi_Host *host, char *buffer,
char **start, off_t offset, int length, int inout)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
int spd, spd1;
......@@ -5770,11 +5184,6 @@ int dc395x_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t o
}
/*
* SCSI host template
*/
static Scsi_Host_Template dc395x_driver_template = {
.module = THIS_MODULE,
.proc_name = DC395X_NAME,
......@@ -5799,8 +5208,7 @@ static Scsi_Host_Template dc395x_driver_template = {
* banner_display - Display banner on first instance of driver
* initialized.
**/
static
void banner_display(void)
static void banner_display(void)
{
static int banner_done = 0;
if (!banner_done)
......@@ -5824,8 +5232,7 @@ void banner_display(void)
*
* Returns 0 on success, or an error code (-ve) on failure.
**/
static
int __devinit dc395x_init_one(struct pci_dev *dev,
static int __devinit dc395x_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct Scsi_Host *scsi_host;
......@@ -5900,10 +5307,6 @@ static void __devexit dc395x_remove_one(struct pci_dev *dev)
}
/*
* Table which identifies the PCI devices which
* are handled by this device driver.
*/
static struct pci_device_id dc395x_pci_table[] = {
{
.vendor = PCI_VENDOR_ID_TEKRAM,
......@@ -5916,10 +5319,6 @@ static struct pci_device_id dc395x_pci_table[] = {
MODULE_DEVICE_TABLE(pci, dc395x_pci_table);
/*
* PCI driver operations.
* Tells the PCI sub system what can be done with the card.
*/
static struct pci_driver dc395x_driver = {
.name = DC395X_NAME,
.id_table = dc395x_pci_table,
......@@ -5933,8 +5332,7 @@ static struct pci_driver dc395x_driver = {
*
* Used by both module and built-in driver to initialise this driver.
**/
static
int __init dc395x_module_init(void)
static int __init dc395x_module_init(void)
{
return pci_module_init(&dc395x_driver);
}
......@@ -5943,8 +5341,7 @@ int __init dc395x_module_init(void)
/**
* dc395x_module_exit - Module cleanup function.
**/
static
void __exit dc395x_module_exit(void)
static void __exit dc395x_module_exit(void)
{
pci_unregister_driver(&dc395x_driver);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment