Commit baf1fb26 authored by Matthew Barth's avatar Matthew Barth Committed by Joel Stanley

ARM: dts: aspeed: everest: Add pca9552 fan presence

Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the
4 GPIO fan presence inputs.
Signed-off-by: default avatarMatthew Barth <msbarth@us.ibm.com>
Signed-off-by: default avatarEddie James <eajames@linux.ibm.com>
Reviewed-by: default avatarBrandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.comSigned-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent d9406d17
......@@ -171,6 +171,37 @@ vga_memory: region@bf000000 {
reg = <0xbf000000 0x01000000>; /* 16M */
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <1000>;
fan0-presence {
label = "fan0-presence";
gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
fan1-presence {
label = "fan1-presence";
gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
fan2-presence {
label = "fan2-presence";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
fan3-presence {
label = "fan3-presence";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
};
};
&i2c0 {
......@@ -540,6 +571,103 @@ fan@3 {
tach-pulses = <2>;
};
};
pca0: pca9552@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"","","","",
"","","","",
"","","","",
"presence-fan3",
"presence-fan2",
"presence-fan1",
"presence-fan0";
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment