Commit bb3c190e authored by V. Ananda Krishnan's avatar V. Ananda Krishnan Committed by Linus Torvalds

[PATCH] jsm: fix for high baud rates problem

      Scott Kilau <Scott_Kilau@digi.com>

Digi serial port console doesn't work when baud rates are set higher than
38400.  So the lookup table and code in jsm_neo.c has been modified and
tested.  Please let me have the feed-back.
Signed-off-by: default avatarV.Ananda Krishnan <mansarov@us.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent bfaa1dee
......@@ -966,50 +966,41 @@ static void neo_param(struct jsm_channel *ch)
if (ch->ch_flags & CH_BAUD0)
ch->ch_flags &= ~(CH_BAUD0);
} else {
int iindex = 0;
int jindex = 0;
const u64 bauds[4][16] = {
{
0, 50, 75, 110,
134, 150, 200, 300,
600, 1200, 1800, 2400,
4800, 9600, 19200, 38400 },
{
0, 57600, 115200, 230400,
460800, 150, 200, 921600,
600, 1200, 1800, 2400,
4800, 9600, 19200, 38400 },
{
0, 57600, 76800, 115200,
131657, 153600, 230400, 460800,
921600, 1200, 1800, 2400,
4800, 9600, 19200, 38400 },
{
0, 57600, 115200, 230400,
460800, 150, 200, 921600,
600, 1200, 1800, 2400,
4800, 9600, 19200, 38400 }
int i;
unsigned int cflag;
static struct {
unsigned int rate;
unsigned int cflag;
} baud_rates[] = {
{ 921600, B921600 },
{ 460800, B460800 },
{ 230400, B230400 },
{ 115200, B115200 },
{ 57600, B57600 },
{ 38400, B38400 },
{ 19200, B19200 },
{ 9600, B9600 },
{ 4800, B4800 },
{ 2400, B2400 },
{ 1200, B1200 },
{ 600, B600 },
{ 300, B300 },
{ 200, B200 },
{ 150, B150 },
{ 134, B134 },
{ 110, B110 },
{ 75, B75 },
{ 50, B50 },
};
baud = C_BAUD(ch->uart_port.info->tty) & 0xff;
if (ch->ch_c_cflag & CBAUDEX)
iindex = 1;
jindex = baud;
if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
baud = bauds[iindex][jindex];
else {
jsm_printk(IOCTL, DEBUG, &ch->ch_bd->pci_dev,
"baud indices were out of range (%d)(%d)",
iindex, jindex);
baud = 0;
}
if (baud == 0)
cflag = C_BAUD(ch->uart_port.info->tty);
baud = 9600;
for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
if (baud_rates[i].cflag == cflag) {
baud = baud_rates[i].rate;
break;
}
}
if (ch->ch_flags & CH_BAUD0)
ch->ch_flags &= ~(CH_BAUD0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment