Merge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: wire up process_vm_writev and process_vm_readv syscalls
  ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list
  ARM: 7158/1: add new MFP implement for NUC900
  ARM: 7157/1: fix a building WARNING for nuc900
  ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF
  ARM: 7155/1: arch.h: Declare 'pt_regs' locally
  ARM: 7154/1: mach-bcmring: fix build error in dma.c
  ARM: 7153/1: mach-bcmring: fix build error in core.c
  ARM: 7152/1: distclean: Remove generated .dtb files
  ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors
  ARM: 7149/1: spi/pl022: Enable clock in probe
  Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"

arch/arm/boot/Makefile

@@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
 
 $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
 
+clean-files := *.dtb
+
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
 		   -C none -a $(LOADADDR) -e $(STARTADDR) \

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_HARDWARE_L2X0_H
 #define __ASM_ARM_HARDWARE_L2X0_H
 
+#include <linux/errno.h>
+
 #define L2X0_CACHE_ID			0x000
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100

arch/arm/include/asm/mach/arch.h

@@ -13,6 +13,7 @@
 struct tag;
 struct meminfo;
 struct sys_timer;
+struct pt_regs;
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/

arch/arm/include/asm/unistd.h

@@ -402,6 +402,8 @@
 #define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 #define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -385,6 +385,8 @@
 		CALL(sys_syncfs)
 		CALL(sys_sendmmsg)
 /* 375 */	CALL(sys_setns)
+		CALL(sys_process_vm_readv)
+		CALL(sys_process_vm_writev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/head.S

@@ -360,7 +360,7 @@ __secondary_data:
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A

arch/arm/kernel/machine_kexec.c

@@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi;
 
 int machine_kexec_prepare(struct kimage *image)
 {
-	unsigned long page_list;
-	void *reboot_code_buffer;
-	page_list = image->head & PAGE_MASK;
-
-	reboot_code_buffer = page_address(image->control_code_page);
-
-	/* Prepare parameters for reboot_code_buffer*/
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	return 0;
 }
 
@@ -100,14 +82,31 @@ void (*kexec_reinit)(void);
 
 void machine_kexec(struct kimage *image)
 {
+	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
+
+	page_list = image->head & PAGE_MASK;
+
 	/* we need both effective and real address here */
 	reboot_code_buffer_phys =
 	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)

arch/arm/kernel/setup.c

@@ -461,8 +461,10 @@ static void __init setup_processor(void)
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
 	       proc_arch[cpu_architecture()], cr_alignment);
 
-	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
-	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
+		 list->arch_name, ENDIANNESS);
+	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~HWCAP_THUMB;

arch/arm/mach-bcmring/core.c

@@ -235,7 +235,7 @@ void __init bcmring_init_timer(void)
 	 */
 	bcmring_clocksource_init();
 
-	sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
 }
 
 struct sys_timer bcmring_timer = {

arch/arm/mach-bcmring/dma.c

@@ -36,6 +36,7 @@
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
+#include <linux/sched.h>
 #include <mach/dma.h>
 
 /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */

arch/arm/mach-w90x900/dev.c

@@ -422,7 +422,7 @@ struct platform_device nuc900_device_kpi = {
 
 /* LCD controller*/
 
-static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+static struct nuc900fb_display nuc900_lcd_info[] = {
 	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
 	[0] = {
 		.type		= LCM_DCCS_VA_SRC_RGB565,
@@ -445,7 +445,7 @@ static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
 	},
 };
 
-static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+static struct nuc900fb_mach_info nuc900_fb_info = {
 #if defined(CONFIG_GPM1040A0_320X240)
 	.displays		= &nuc900_lcd_info[0],
 #else

arch/arm/mach-w90x900/include/mach/mfp.h

@@ -19,6 +19,7 @@
 extern void mfp_set_groupf(struct device *dev);
 extern void mfp_set_groupc(struct device *dev);
 extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+extern void mfp_set_groupd(struct device *dev, const char *subname);
 
 #endif /* __ASM_ARCH_MFP_H */

arch/arm/mach-w90x900/include/mach/nuc900_spi.h

@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_SPI_H
 #define __ASM_ARCH_SPI_H
 
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
 
 struct nuc900_spi_info {
 	unsigned int num_cs;

arch/arm/mach-w90x900/mfp.c

@@ -26,10 +26,8 @@
 #define REG_MFSEL	(W90X900_VA_GCR + 0xC)
 
 #define GPSELF		(0x01 << 1)
-
 #define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
+#define GPSELD		(0x0f << 4)
 
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
@@ -37,11 +35,16 @@
 #define GPIOG0TO1	(0x03 << 14)
 #define GPIOG2TO3	(0x03 << 16)
 #define GPIOG22TO23	(0x03 << 22)
+#define GPIOG18TO20	(0x07 << 18)
 
 #define ENSPI		(0x0a << 14)
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 #define ENAC97		(0x02 << 22)
+#define ENSD1		(0x02 << 18)
+#define ENSD0		(0x0a << 4)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
 
 static DEFINE_MUTEX(mfp_mutex);
 
@@ -127,15 +130,18 @@ void mfp_set_groupi(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
-void mfp_set_groupg(struct device *dev)
+void mfp_set_groupg(struct device *dev, const char *subname)
 {
 	unsigned long mfpen;
 	const char *dev_id;
 
-	BUG_ON(!dev);
+	BUG_ON((!dev) && (!subname));
 
 	mutex_lock(&mfp_mutex);
 
+	if (subname != NULL)
+		dev_id = subname;
+	else
 		dev_id = dev_name(dev);
 
 	mfpen = __raw_readl(REG_MFSEL);
@@ -152,6 +158,9 @@ void mfp_set_groupg(struct device *dev)
 	} else if (strcmp(dev_id, "nuc900-audio") == 0) {
 		mfpen &= ~(GPIOG22TO23);
 		mfpen |= ENAC97;/*enable AC97*/
+	} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
+		mfpen &= ~(GPIOG18TO20);
+		mfpen |= (ENSD1 | 0x01);/*enable sd1*/
 	} else {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
 	}
@@ -162,3 +171,30 @@ void mfp_set_groupg(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
+void mfp_set_groupd(struct device *dev, const char *subname)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON((!dev) && (!subname));
+
+	mutex_lock(&mfp_mutex);
+
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
+		mfpen &= ~GPSELD;/*enable sd0*/
+		mfpen |= ENSD0;
+	} else
+		mfpen &= (~GPSELD);
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupd);

drivers/spi/spi-pl022.c

@@ -2184,6 +2184,12 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
 		goto  err_clk_prep;
 	}
 
+	status = clk_enable(pl022->clk);
+	if (status) {
+		dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
+		goto err_no_clk_en;
+	}
+
 	/* Disable SSP */
 	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
 	       SSP_CR1(pl022->virtbase));
@@ -2237,6 +2243,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
 
 	free_irq(adev->irq[0], pl022);
  err_no_irq:
+	clk_disable(pl022->clk);
+ err_no_clk_en:
 	clk_unprepare(pl022->clk);
  err_clk_prep:
 	clk_put(pl022->clk);