ASoC: codecs: ad193x: Group register initialization at probe

Create a structure with the register initialization values at probe and
use it to initialize all the registers at once.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/ad193x.c

@@ -415,6 +415,38 @@ static struct snd_soc_dai_driver ad193x_no_adc_dai = {
 	.ops = &ad193x_dai_ops,
 };
 
+struct ad193x_reg_default {
+	unsigned int reg;
+	unsigned int val;
+};
+
+/* codec register values to set after reset */
+static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
+{
+	const struct ad193x_reg_default reg_init[] = {
+		{  0, 0x99 },	/* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
+		{  1, 0x04 },	/* PLL_CLK_CTRL1: no on-chip Vref */
+		{  2, 0x40 },	/* DAC_CTRL0: TDM mode */
+		{  4, 0x1A },	/* DAC_CTRL2: 48kHz de-emphasis, unmute dac */
+		{  5, 0x00 },	/* DAC_CHNL_MUTE: unmute DAC channels */
+	};
+	const struct ad193x_reg_default reg_adc_init[] = {
+		{ 14, 0x03 },	/* ADC_CTRL0: high-pass filter enable */
+		{ 15, 0x43 },	/* ADC_CTRL1: sata delay=1, adc aux mode */
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(reg_init); i++)
+		regmap_write(ad193x->regmap, reg_init[i].reg, reg_init[i].val);
+
+	if (ad193x_has_adc(ad193x)) {
+		for (i = 0; i < ARRAY_SIZE(reg_adc_init); i++) {
+			regmap_write(ad193x->regmap, reg_adc_init[i].reg,
+				     reg_adc_init[i].val);
+		}
+	}
+}
+
 static int ad193x_component_probe(struct snd_soc_component *component)
 {
 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
@@ -422,25 +454,7 @@ static int ad193x_component_probe(struct snd_soc_component *component)
 	int num, ret;
 
 	/* default setting for ad193x */
-
-	/* unmute dac channels */
-	regmap_write(ad193x->regmap, AD193X_DAC_CHNL_MUTE, 0x0);
-	/* de-emphasis: 48kHz, powedown dac */
-	regmap_write(ad193x->regmap, AD193X_DAC_CTRL2, 0x1A);
-	/* dac in tdm mode */
-	regmap_write(ad193x->regmap, AD193X_DAC_CTRL0, 0x40);
-
-	/* adc only */
-	if (ad193x_has_adc(ad193x)) {
-		/* high-pass filter enable */
-		regmap_write(ad193x->regmap, AD193X_ADC_CTRL0, 0x3);
-		/* sata delay=1, adc aux mode */
-		regmap_write(ad193x->regmap, AD193X_ADC_CTRL1, 0x43);
-	}
-
-	/* pll input: mclki/xi */
-	regmap_write(ad193x->regmap, AD193X_PLL_CLK_CTRL0, 0x99); /* mclk=24.576Mhz: 0x9D; mclk=12.288Mhz: 0x99 */
-	regmap_write(ad193x->regmap, AD193X_PLL_CLK_CTRL1, 0x04);
+	ad193x_reg_default_init(ad193x);
 
 	/* adc only */
 	if (ad193x_has_adc(ad193x)) {