Merge bk://linux-dj.bkbits.net/agpgart

into home.transmeta.com:/home/torvalds/v2.5/linux

arch/alpha/vmlinux.lds.S

@@ -74,6 +74,9 @@ SECTIONS
 	__con_initcall_end = .;
   }
 
+  . = ALIGN(8);
+  SECURITY_INIT
+
   . = ALIGN(64);
   __per_cpu_start = .;
   .data.percpu : { *(.data.percpu) }

arch/arm/vmlinux-armo.lds.in

@@ -43,6 +43,7 @@ SECTIONS
 		__con_initcall_start = .;
 			*(.con_initcall.init)
 		__con_initcall_end = .;
+		SECURITY_INIT
 		. = ALIGN(32768);
 		__init_end = .;
 	}

arch/arm/vmlinux-armv.lds.in

@@ -53,6 +53,7 @@ SECTIONS
 		__con_initcall_start = .;
 			*(.con_initcall.init)
 		__con_initcall_end = .;
+		SECURITY_INIT
 		. = ALIGN(32);
 		__initramfs_start = .;
 			usr/built-in.o(.init.ramfs)

arch/cris/vmlinux.lds.S

@@ -74,6 +74,11 @@ SECTIONS
 		__con_initcall_start = .;
 		*(.con_initcall.init)
 		__con_initcall_end = .;
+	}
+	.security_initcall.init : {
+		__security_initcall_start = .;
+		*(.security_initcall.init)
+		__security_initcall_end = .;
 
 		/* We fill to the next page, so we can discard all init
 		   pages without needing to consider what payload might be

arch/h8300/platform/h8300h/generic/rom.ld

@@ -83,6 +83,7 @@ SECTIONS
 	___con_initcall_start = .;
 		*(.con_initcall.init)
 	___con_initcall_end = .;
+	SECURITY_INIT
 		. = ALIGN(4);
 	___initramfs_start = .;
   		*(.init.ramfs)

arch/i386/vmlinux.lds.S

@@ -81,6 +81,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(4);
   __alt_instructions = .;
   .altinstructions : { *(.altinstructions) } 

arch/ia64/vmlinux.lds.S

@@ -141,6 +141,10 @@ SECTIONS
   .con_initcall.init : AT(ADDR(.con_initcall.init) - PAGE_OFFSET)
 	{ *(.con_initcall.init) }
   __con_initcall_end = .;
+  __security_initcall_start = .;
+  .security_initcall.init : AT(ADDR(.security_initcall.init) - PAGE_OFFSET)
+	{ *(.security_initcall.init) }
+  __security_initcall_end = .;
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 

arch/m68k/vmlinux-std.lds

@@ -67,6 +67,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(8192);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }

arch/m68k/vmlinux-sun3.lds

@@ -61,6 +61,7 @@ __init_begin = .;
 	__con_initcall_start = .;
 	.con_initcall.init : { *(.con_initcall.init) }
 	__con_initcall_end = .;
+	SECURITY_INIT
 	. = ALIGN(8192);
 	__initramfs_start = .;
 	.init.ramfs : { *(.init.ramfs) }

arch/m68knommu/vmlinux.lds.S

@@ -277,9 +277,7 @@ SECTIONS {
 		__con_initcall_start = .;
 		*(.con_initcall.init)
 		__con_initcall_end = .;
-		__security_initcall_start = .;
-		*(.security_initcall.init)
-		__security_initcall_end = .;
+		SECURITY_INIT
 		. = ALIGN(4);
 		__initramfs_start = .;
 		*(.init.ramfs)

arch/mips/vmlinux.lds.S

@@ -54,6 +54,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(4096);	/* Align double page for init_task_union */
   __init_end = .;
 

arch/mips64/vmlinux.lds.S

@@ -53,6 +53,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(4096);	/* Align double page for init_task_union */
   __init_end = .;
 

arch/parisc/vmlinux.lds.S

@@ -80,6 +80,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(4096);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }

arch/ppc/vmlinux.lds.S

@@ -119,6 +119,8 @@ SECTIONS
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
 
+  SECURITY_INIT
+
   __start___ftr_fixup = .;
   __ftr_fixup : { *(__ftr_fixup) }
   __stop___ftr_fixup = .;

arch/ppc64/vmlinux.lds.S

@@ -104,6 +104,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(4096);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }

arch/s390/vmlinux.lds.S

@@ -94,6 +94,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(256);
   __initramfs_start = .;
   .init.ramfs : { *(.init.initramfs) }

arch/sh/vmlinux.lds.S

@@ -71,6 +71,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   __machvec_start = .;
   .machvec.init : { *(.machvec.init) }
   __machvec_end = .;

arch/sparc/vmlinux.lds.S

@@ -62,6 +62,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(4096);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }

arch/sparc64/vmlinux.lds.S

@@ -68,6 +68,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(8192); 
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }

arch/x86_64/Kconfig

@@ -52,6 +52,18 @@ config EARLY_PRINTK
 	  klogd/syslogd or the X server. You should normally N here, unless
 	  you want to debug such a crash.
 	  
+config HPET_TIMER
+	bool
+	default y
+	help
+	  Use the IA-PC HPET (High Precision Event Timer) to manage
+	  time in preference to the PIT and RTC, if a HPET is
+	  present.  The HPET provides a stable time base on SMP
+	  systems, unlike the RTC, but it is more expensive to access,
+	  as it is off-chip.  You can find the HPET spec at
+	  <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
+
+	  If unsure, say Y.
 
 config GENERIC_ISA_DMA
 	bool

arch/x86_64/ia32/ia32entry.S

@@ -47,6 +47,7 @@
 ENTRY(ia32_cstar_target)
 	swapgs
 	movl	%esp,%r8d
+	movq	%r8,%gs:pda_oldrsp
 	movq	%gs:pda_kernelstack,%rsp
 	sti
 	SAVE_ARGS 8,1

arch/x86_64/kernel/acpi/boot.c

@@ -244,9 +244,11 @@ acpi_parse_hpet (
 		return -1;
 	}
 
-	hpet.address = hpet_tbl->addr.addrl | ((long) hpet_tbl->addr.addrh << 32);
+	vxtime.hpet_address = hpet_tbl->addr.addrl |
+		((long) hpet_tbl->addr.addrh << 32);
 
-	printk(KERN_INFO "acpi: HPET id: %#x base: %#lx\n", hpet_tbl->id, hpet.address);
+	printk(KERN_INFO "acpi: HPET id: %#x base: %#lx\n",
+	       hpet_tbl->id, vxtime.hpet_address);
 
 	return 0;
 } 

arch/x86_64/kernel/apic.c

@@ -690,7 +690,13 @@ static void setup_APIC_timer(unsigned int clocks)
 	} 
 
 	/* wait for irq slice */
-	{
+ 	if (vxtime.hpet_address) {
+ 		int trigger = hpet_readl(HPET_T0_CMP);
+ 		while (hpet_readl(HPET_COUNTER) >= trigger)
+ 			/* do nothing */ ;
+ 		while (hpet_readl(HPET_COUNTER) <  trigger)
+ 			/* do nothing */ ;
+ 	} else {
 		int c1, c2;
 		outb_p(0x00, 0x43);
 		c2 = inb_p(0x40);

arch/x86_64/kernel/bluesmoke.c

@@ -363,22 +363,12 @@ static void __init k8_mcheck_init(struct cpuinfo_x86 *c)
 	machine_check_vector = k8_machine_check; 
 	for (i = 0; i < banks; i++) { 
 		u64 val = ((1UL<<i) & disabled_banks) ? 0 : ~0UL; 
+		if (val && i == 4) 
+			val = k8_nb_flags;
 		wrmsrl(MSR_IA32_MC0_CTL+4*i, val);
 		wrmsrl(MSR_IA32_MC0_STATUS+4*i,0); 
 	}
 
-	nb = find_k8_nb(); 
-	if (nb != NULL) {
-		u32 reg, reg2;
-		pci_read_config_dword(nb, 0x40, &reg); 
-		pci_write_config_dword(nb, 0x40, k8_nb_flags);
-		pci_read_config_dword(nb, 0x44, &reg2);
-		pci_write_config_dword(nb, 0x44, reg2); 
-		printk(KERN_INFO "Machine Check for K8 Northbridge %d enabled (%x,%x)\n",
-		       nb->devfn, reg, reg2);
-		ignored_banks |= (1UL<<4); 
-	} 
-
 	set_in_cr4(X86_CR4_MCE);	   	
 
 	if (mcheck_interval && (smp_processor_id() == 0)) { 

arch/x86_64/kernel/pci-gart.c

@@ -173,12 +173,10 @@ void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
 	if (iommu_page == -1)
 		goto error; 
 
-   	/* Fill in the GATT, allocating pages as needed. */
+   	/* Fill in the GATT */
 	for (i = 0; i < size; i++) { 
 		unsigned long phys_mem; 
 		void *mem = memory + i*PAGE_SIZE;
-		if (i > 0) 
-			atomic_inc(&virt_to_page(mem)->count); 
 		phys_mem = virt_to_phys(mem); 
 		BUG_ON(phys_mem & ~PHYSICAL_PAGE_MASK); 
 		iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem); 
@@ -206,16 +204,14 @@ void pci_free_consistent(struct pci_dev *hwdev, size_t size,
 	size = round_up(size, PAGE_SIZE); 
 	if (bus >= iommu_bus_base && bus <= iommu_bus_base + iommu_size) { 
 		unsigned pages = size >> PAGE_SHIFT;
+		int i;
 		iommu_page = (bus - iommu_bus_base) >> PAGE_SHIFT;
 		vaddr = __va(GPTE_DECODE(iommu_gatt_base[iommu_page]));
-#ifdef CONFIG_IOMMU_DEBUG
-		int i;
 		for (i = 0; i < pages; i++) {
 			u64 pte = iommu_gatt_base[iommu_page + i];
 		BUG_ON((pte & GPTE_VALID) == 0); 
 		iommu_gatt_base[iommu_page + i] = 0; 		
 	} 
-#endif
 		free_iommu(iommu_page, pages);
 	}
 	free_pages((unsigned long)vaddr, get_order(size)); 		
@@ -319,11 +315,6 @@ dma_addr_t pci_map_single(struct pci_dev *dev, void *addr, size_t size, int dir)
 		 */
 		iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem);
 
-#ifdef CONFIG_IOMMU_DEBUG
-		/* paranoia check */
-		BUG_ON(GPTE_DECODE(iommu_gatt_base[iommu_page+i]) != phys_mem); 
-#endif
-
 #ifdef CONFIG_IOMMU_LEAK
 		/* XXX need eventually caller of pci_map_sg */
 		if (iommu_leak_tab) 
@@ -350,7 +341,6 @@ void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 		return;
 	iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;	
 	npages = round_up(size + (dma_addr & ~PAGE_MASK), PAGE_SIZE) >> PAGE_SHIFT;
-#ifdef CONFIG_IOMMU_DEBUG
 	int i;
 	for (i = 0; i < npages; i++) { 
 		iommu_gatt_base[iommu_page + i] = 0; 
@@ -359,7 +349,6 @@ void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 			iommu_leak_tab[iommu_page + i] = 0; 
 #endif
 	}
-#endif
 	free_iommu(iommu_page, npages);
 }
 

arch/x86_64/kernel/process.c

@@ -150,7 +150,7 @@ __setup("idle=", idle_setup);
 
 
 /* Prints also some state that isn't saved in the pt_regs */ 
-void show_regs(struct pt_regs * regs)
+void __show_regs(struct pt_regs * regs)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs;
 	unsigned int fsindex,gsindex;
@@ -192,7 +192,11 @@ void show_regs(struct pt_regs * regs)
 	       fs,fsindex,gs,gsindex,shadowgs); 
 	printk("CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); 
 	printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4);
+}
 
+void show_regs(struct pt_regs *regs)
+{
+	__show_regs(regs);
 	show_trace(&regs->rsp);
 }
 

arch/x86_64/kernel/smpboot.c

@@ -67,6 +67,8 @@ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
 /* Set when the idlers are all forked */
 int smp_threads_ready;
 
+extern void time_init_smp(void);
+
 /*
  * Trampoline 80x86 program as an array.
  */
@@ -760,7 +762,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		if (APIC_init_uniprocessor())
 			printk(KERN_NOTICE "Local APIC not detected."
 					   " Using dummy APIC emulation.\n");
-		return;
+		goto smp_done;
 	}
 
 	/*
@@ -784,7 +786,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		cpu_online_map = phys_cpu_present_map = 1;
 		phys_cpu_present_map = 1;
 		disable_apic = 1;
-		return;
+		goto smp_done;
 	}
 
 	verify_local_APIC();
@@ -799,7 +801,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 		cpu_online_map = phys_cpu_present_map = 1;
 		phys_cpu_present_map = 1;
 		disable_apic = 1;
-		return;
+		goto smp_done;
 	}
 
 	connect_bsp_APIC();
@@ -883,6 +885,9 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	 */
 	if (cpu_has_tsc && cpucount)
 		synchronize_tsc_bp();
+
+ smp_done:
+	time_init_smp();
 }
 
 /* These are wrappers to interface to the new boot process.  Someone

arch/x86_64/kernel/time.c

@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/bcd.h>
+#include <asm/pgtable.h>
 #include <asm/vsyscall.h>
 #include <asm/timex.h>
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -35,41 +36,61 @@ u64 jiffies_64 = INITIAL_JIFFIES;
 extern int using_apic_timer;
 
 spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;
+spinlock_t i8253_lock = SPIN_LOCK_UNLOCKED;
 
 extern int using_apic_timer;
 extern void smp_local_timer_interrupt(struct pt_regs * regs);
 
+#undef HPET_HACK_ENABLE_DANGEROUS
+
 
 unsigned int cpu_khz;					/* TSC clocks / usec, not used here */
 unsigned long hpet_period;				/* fsecs / HPET clock */
 unsigned long hpet_tick;				/* HPET clocks / interrupt */
-int hpet_report_lost_ticks;				/* command line option */
+unsigned long vxtime_hz = 1193182;
+int report_lost_ticks;				/* command line option */
 
-struct hpet_data __hpet __section_hpet;			/* address, quotient, trigger, hz */
+struct vxtime_data __vxtime __section_vxtime;	/* for vsyscalls */
 
 volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
 unsigned long __wall_jiffies __section_wall_jiffies = INITIAL_JIFFIES;
 struct timespec __xtime __section_xtime;
 struct timezone __sys_tz __section_sys_tz;
 
+static inline void rdtscll_sync(unsigned long *tsc)
+{
+#ifdef CONFIG_SMP
+	sync_core();
+#endif
+	rdtscll(*tsc);
+}
+
 /*
  * do_gettimeoffset() returns microseconds since last timer interrupt was
  * triggered by hardware. A memory read of HPET is slower than a register read
  * of TSC, but much more reliable. It's also synchronized to the timer
  * interrupt. Note that do_gettimeoffset() may return more than hpet_tick, if a
- * timer interrupt has happened already, but hpet.trigger wasn't updated yet.
+ * timer interrupt has happened already, but vxtime.trigger wasn't updated yet.
  * This is not a problem, because jiffies hasn't updated either. They are bound
  * together by xtime_lock.
          */
 
-inline unsigned int do_gettimeoffset(void)
+static inline unsigned int do_gettimeoffset_tsc(void)
 {
 	unsigned long t;
-	sync_core();
-	rdtscll(t);	
-	return (t  - hpet.last_tsc) * (1000000L / HZ) / hpet.ticks + hpet.offset;
+	unsigned long x;
+	rdtscll_sync(&t);
+	x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> 32;
+	return x;
 }
 
+static inline unsigned int do_gettimeoffset_hpet(void)
+{
+	return ((hpet_readl(HPET_COUNTER) - vxtime.last) * vxtime.quot) >> 32;
+}
+
+unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc;
+
 /*
  * This version of gettimeofday() has microsecond resolution and better than
  * microsecond precision, as we're using at least a 10 MHz (usually 14.31818
@@ -87,7 +108,8 @@ void do_gettimeofday(struct timeval *tv)
 		sec = xtime.tv_sec;
 		usec = xtime.tv_nsec / 1000;
 
-		t = (jiffies - wall_jiffies) * (1000000L / HZ) + do_gettimeoffset();
+		t = (jiffies - wall_jiffies) * (1000000L / HZ) +
+			do_gettimeoffset();
 		usec += t;
 
 	} while (read_seqretry(&xtime_lock, seq));
@@ -107,7 +129,7 @@ void do_settimeofday(struct timeval *tv)
 	write_seqlock_irq(&xtime_lock);
 
 	tv->tv_usec -= do_gettimeoffset() +
-		(jiffies - wall_jiffies) * tick_usec;
+		(jiffies - wall_jiffies) * (USEC_PER_SEC/HZ);
 
 	while (tv->tv_usec < 0) {
 		tv->tv_usec += 1000000;
@@ -178,8 +200,8 @@ static void set_rtc_mmss(unsigned long nowtime)
 		CMOS_WRITE(real_seconds, RTC_SECONDS);
 		CMOS_WRITE(real_minutes, RTC_MINUTES);
 	} else
-		printk(KERN_WARNING "time.c: can't update CMOS clock from %d to %d\n",
-		       cmos_minutes, real_minutes);
+		printk(KERN_WARNING "time.c: can't update CMOS clock "
+		       "from %d to %d\n", cmos_minutes, real_minutes);
 
 /*
  * The following flags have to be released exactly in this order, otherwise the
@@ -198,6 +220,8 @@ static void set_rtc_mmss(unsigned long nowtime)
 static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	static unsigned long rtc_update = 0;
+	unsigned long tsc, lost = 0;
+	int delay, offset = 0;
 
 /*
  * Here we are in the timer irq handler. We have irqs locally disabled (so we
@@ -208,17 +232,53 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	write_seqlock(&xtime_lock);
 
-	{
-		unsigned long t;
+	if (vxtime.hpet_address) {
+		offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+		delay = hpet_readl(HPET_COUNTER) - offset;
+	} else {
+		spin_lock(&i8253_lock);
+		outb_p(0x00, 0x43);
+		delay = inb_p(0x40);
+		delay |= inb(0x40) << 8;
+		spin_unlock(&i8253_lock);
+		delay = LATCH - 1 - delay;
+	}
 
-		sync_core();
-		rdtscll(t);
-		hpet.offset = (t  - hpet.last_tsc) * (1000000L / HZ) / hpet.ticks + hpet.offset - 1000000L / HZ;
-		if (hpet.offset >= 1000000L / HZ)
-			hpet.offset = 0;
-		hpet.ticks = min_t(long, max_t(long, (t  - hpet.last_tsc) * (1000000L / HZ) / (1000000L / HZ - hpet.offset),
-				cpu_khz * 1000/HZ * 15 / 16), cpu_khz * 1000/HZ * 16 / 15); 
-		hpet.last_tsc = t;
+	rdtscll_sync(&tsc);
+
+	if (vxtime.mode == VXTIME_HPET) {
+		if (offset - vxtime.last > hpet_tick) {
+			lost = (offset - vxtime.last) / hpet_tick - 1;
+		}
+
+		vxtime.last = offset;
+	} else {
+		offset = (((tsc - vxtime.last_tsc) *
+			   vxtime.tsc_quot) >> 32) - (USEC_PER_SEC / HZ);
+
+		if (offset < 0)
+			offset = 0;
+
+		if (offset > (USEC_PER_SEC / HZ)) {
+			lost = offset / (USEC_PER_SEC / HZ);
+			offset %= (USEC_PER_SEC / HZ);
+		}
+
+		vxtime.last_tsc = tsc - vxtime.quot * delay / vxtime.tsc_quot;
+
+		if ((((tsc - vxtime.last_tsc) *
+		      vxtime.tsc_quot) >> 32) < offset)
+			vxtime.last_tsc = tsc -
+				(((long) offset << 32) / vxtime.tsc_quot) - 1;
+	}
+
+	if (lost) {
+		if (report_lost_ticks)
+			printk(KERN_WARNING "time.c: Lost %ld timer "
+			       "tick(s)! (rip %016lx)\n",
+			       (offset - vxtime.last) / hpet_tick - 1,
+			       regs->rip);
+		jiffies += lost;
 	}
 
 /*
@@ -244,7 +304,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  * If we have an externally synchronized Linux clock, then update CMOS clock
  * accordingly every ~11 minutes. set_rtc_mmss() will be called in the jiffy
  * closest to exactly 500 ms before the next second. If the update fails, we
- * don'tcare, as it'll be updated on the next turn, and the problem (time way
+ * don't care, as it'll be updated on the next turn, and the problem (time way
  * off) isn't likely to go away much sooner anyway.
  */
 
@@ -263,6 +323,7 @@ unsigned long get_cmos_time(void)
 {
 	unsigned int timeout, year, mon, day, hour, min, sec;
 	unsigned char last, this;
+	unsigned long flags;
 
 /*
  * The Linux interpretation of the CMOS clock register contents: When the
@@ -272,7 +333,7 @@ unsigned long get_cmos_time(void)
  * standard 8.3 MHz ISA bus.
  */
 
-	spin_lock(&rtc_lock); 
+	spin_lock_irqsave(&rtc_lock, flags);
 
 	timeout = 1000000;
 	last = this = 0;
@@ -295,7 +356,7 @@ unsigned long get_cmos_time(void)
 		mon = CMOS_READ(RTC_MONTH);
 		year = CMOS_READ(RTC_YEAR);
 
-	spin_unlock(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 /*
  * We know that x86-64 always uses BCD format, no need to check the config
@@ -326,6 +387,32 @@ unsigned long get_cmos_time(void)
 
 #define TICK_COUNT 100000000
 
+static unsigned int __init hpet_calibrate_tsc(void)
+{
+	int tsc_start, hpet_start;
+	int tsc_now, hpet_now;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	local_irq_disable();
+
+	hpet_start = hpet_readl(HPET_COUNTER);
+	rdtscl(tsc_start);
+
+	do {
+		local_irq_disable();
+		hpet_now = hpet_readl(HPET_COUNTER);
+		sync_core();
+		rdtscl(tsc_now);
+		local_irq_restore(flags);
+	} while ((tsc_now - tsc_start) < TICK_COUNT &&
+		 (hpet_now - hpet_start) < TICK_COUNT);
+
+	return (tsc_now - tsc_start) * 1000000000L
+		/ ((hpet_now - hpet_start) * hpet_period / 1000);
+}
+
+
 /*
  * pit_calibrate_tsc() uses the speaker output (channel 2) of
  * the PIT. This is better than using the timer interrupt output,
@@ -339,10 +426,9 @@ static unsigned int __init pit_calibrate_tsc(void)
 	unsigned long start, end;
 	unsigned long flags;
 
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+	spin_lock_irqsave(&i8253_lock, flags);
 
-	local_irq_save(flags);
-	local_irq_disable();
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
 
 	outb(0xb0, 0x43);
 	outb((1193182 / (1000 / 50)) & 0xff, 0x42);
@@ -353,42 +439,146 @@ static unsigned int __init pit_calibrate_tsc(void)
 	sync_core();
 	rdtscll(end);
 
-
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&i8253_lock, flags);
 	
 	return (end - start) / 50;
 }
 
+static int hpet_init(void)
+{
+	unsigned int cfg, id;
+
+	if (!vxtime.hpet_address)
+		return -1;
+	set_fixmap_nocache(FIX_HPET_BASE, vxtime.hpet_address);
+
+/*
+ * Read the period, compute tick and quotient.
+ */
+
+	id = hpet_readl(HPET_ID);
+
+	if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER) ||
+	    !(id & HPET_ID_LEGSUP))
+		return -1;
+
+	hpet_period = hpet_readl(HPET_PERIOD);
+	if (hpet_period < 100000 || hpet_period > 100000000)
+		return -1;
+
+	hpet_tick = (1000000000L * (USEC_PER_SEC / HZ) + hpet_period / 2) /
+		hpet_period;
+
+/*
+ * Stop the timers and reset the main counter.
+ */
+
+	cfg = hpet_readl(HPET_CFG);
+	cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
+	hpet_writel(cfg, HPET_CFG);
+	hpet_writel(0, HPET_COUNTER);
+	hpet_writel(0, HPET_COUNTER + 4);
+
+/*
+ * Set up timer 0, as periodic with first interrupt to happen at hpet_tick,
+ * and period also hpet_tick.
+ */
+
+	hpet_writel(HPET_T0_ENABLE | HPET_T0_PERIODIC | HPET_T0_SETVAL |
+		    HPET_T0_32BIT, HPET_T0_CFG);
+	hpet_writel(hpet_tick, HPET_T0_CMP);
+	hpet_writel(hpet_tick, HPET_T0_CMP);
+
+/*
+ * Go!
+ */
+
+	cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+	hpet_writel(cfg, HPET_CFG);
+
+	return 0;
+}
+
 void __init pit_init(void)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8253_lock, flags);
 	outb_p(0x34, 0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
 	outb_p(LATCH & 0xff, 0x40);	/* LSB */
 	outb_p(LATCH >> 8, 0x40);	/* MSB */
+	spin_unlock_irqrestore(&i8253_lock, flags);
 }
 
 int __init time_setup(char *str)
 {
-	hpet_report_lost_ticks = 1;
+	report_lost_ticks = 1;
 	return 1;
 }
 
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+static struct irqaction irq0 = {
+	timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL
+};
 
 extern void __init config_acpi_tables(void);
 
 void __init time_init(void)
 {
+	char *timename;
+
+#ifdef HPET_HACK_ENABLE_DANGEROUS
+        if (!vxtime.hpet_address) {
+		printk(KERN_WARNING "time.c: WARNING: Enabling HPET base "
+		       "manually!\n");
+                outl(0x800038a0, 0xcf8);
+                outl(0xff000001, 0xcfc);
+                outl(0x800038a0, 0xcf8);
+                hpet_address = inl(0xcfc) & 0xfffffffe;
+		printk(KERN_WARNING "time.c: WARNING: Enabled HPET "
+		       "at %#lx.\n", hpet_address);
+        }
+#endif
+
 	xtime.tv_sec = get_cmos_time();
 	xtime.tv_nsec = 0;
 
+	if (!hpet_init()) {
+                vxtime_hz = (1000000000000000L + hpet_period / 2) /
+			hpet_period;
+		cpu_khz = hpet_calibrate_tsc();
+		timename = "HPET";
+	} else {
 	pit_init();
-	printk(KERN_INFO "time.c: Using 1.1931816 MHz PIT timer.\n");
 	cpu_khz = pit_calibrate_tsc();
+		timename = "PIT";
+	}
+
+	printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
+	       vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
 	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
 		cpu_khz / 1000, cpu_khz % 1000);
-	hpet.ticks = cpu_khz * (1000 / HZ);
-	rdtscll(hpet.last_tsc);
+	vxtime.mode = VXTIME_TSC;
+	vxtime.quot = (1000000L << 32) / vxtime_hz;
+	vxtime.tsc_quot = (1000L << 32) / cpu_khz;
+	vxtime.hz = vxtime_hz;
+	rdtscll_sync(&vxtime.last_tsc);
 	setup_irq(0, &irq0);
 }
 
+void __init time_init_smp(void)
+{
+	char *timetype;
+
+	if (vxtime.hpet_address) {
+		timetype = "HPET";
+		vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+		vxtime.mode = VXTIME_HPET;
+		do_gettimeoffset = do_gettimeoffset_hpet;
+	} else {
+		timetype = "PIT/TSC";
+		vxtime.mode = VXTIME_TSC;
+	}
+	printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+}
+
 __setup("report_lost_ticks", time_setup);

arch/x86_64/kernel/traps.c

@@ -263,7 +263,7 @@ void show_registers(struct pt_regs *regs)
 		rsp = regs->rsp;
 
 	printk("CPU %d ", cpu);
-	show_regs(regs);
+	__show_regs(regs);
 	printk("Process %s (pid: %d, stackpage=%08lx)\n",
 		cur->comm, cur->pid, 4096+(unsigned long)cur);
 

arch/x86_64/kernel/vsyscall.c

@@ -78,13 +78,21 @@ static force_inline void do_vgettimeofday(struct timeval * tv)
 	do {
 		sequence = read_seqbegin(&__xtime_lock);
 		
-		sync_core();
-		rdtscll(t);
 		sec = __xtime.tv_sec;
 		usec = (__xtime.tv_nsec / 1000) +
-			(__jiffies - __wall_jiffies) * (1000000 / HZ) +
-			(t  - __hpet.last_tsc) * (1000000 / HZ) / __hpet.ticks + __hpet.offset;
+			(__jiffies - __wall_jiffies) * (1000000 / HZ);
 
+		if (__vxtime.mode == VXTIME_TSC) {
+			sync_core();
+			rdtscll(t);
+			usec += ((t - __vxtime.last_tsc) *
+				 __vxtime.tsc_quot) >> 32;
+		} else {
+#if 0
+			usec += ((readl(fix_to_virt(VSYSCALL_HPET) + 0xf0) -
+				  __vxtime.last) * __vxtime.quot) >> 32;
+#endif
+		}
 	} while (read_seqretry(&__xtime_lock, sequence));
 
 	tv->tv_sec = sec + usec / 1000000;

arch/x86_64/lib/clear_page.S

-/*
- * Copyright 2002 Andi Kleen, SuSE Labs.
- */		 
-	#include <linux/linkage.h>
 
 /*
  * Zero a page. 	
  * rdi	page
  */			
-ENTRY(clear_page)
+	.globl clear_page
+	.p2align 4
+clear_page:
 	xorl   %eax,%eax
-	movl   $4096/128,%ecx
-	movl   $128,%edx
-loop:
+	movl   $4096/64,%ecx
+	.p2align 4
+.Lloop:
+	decl	%ecx
 #define PUT(x) movq %rax,x*8(%rdi) 
-	PUT(0)
+	movq %rax,(%rdi)
 	PUT(1)
 	PUT(2)
 	PUT(3)
@@ -21,17 +20,8 @@ loop:
 	PUT(5)
 	PUT(6)
 	PUT(7)
-	PUT(8)
-	PUT(9)
-	PUT(10)
-	PUT(11)
-	PUT(12)
-	PUT(13)
-	PUT(14)
-	PUT(15)
-	addq    %rdx,%rdi
-	decl	%ecx
-	jnz	loop
-	sfence	
+	leaq	64(%rdi),%rdi
+	jnz	.Lloop
+	nop
 	ret
 	    	

arch/x86_64/lib/copy_page.S

-/*
- * Copyright 2002 Andi Kleen, SuSE Labs.
- */	 	
-	
-	#include <linux/linkage.h>
-	#include <linux/config.h>
-	#ifdef CONFIG_PREEMPT
-	#warning "check your fpu context saving!"
-	#endif
-
-/*
- * Copy a page. 
- *		
- * rdi destination page
- * rsi source page
- *		
- * src/dst must be aligned to 16 bytes.
- * 
- * Warning: in case of super lazy FP save this needs to be preempt_stop	
- */
+/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
+	
+/* Don't use streaming store because it's better when the target
+   ends up in cache. */
+	    
+/* Could vary the prefetch distance based on SMP/UP */
 
 	.globl copy_page
-	.p2align
+	.p2align 4
 copy_page:
-	prefetchnta (%rsi) 
-	prefetchnta 64(%rsi)
-	    
-	movq %rsp,%rax
-	subq $16*4,%rsp
-	andq $~15,%rsp		
-	movdqa %xmm0,(%rsp) 
-	movdqa %xmm1,16(%rsp) 
-	movdqa %xmm2,32(%rsp) 
-	movdqa %xmm3,48(%rsp)
-	
-	movl   $(4096/128)-2,%ecx
-	movl   $128,%edx
-loop:
-	prefetchnta (%rsi) 
-	prefetchnta 64(%rsi) 
-loop_no_prefetch:	
-	movdqa (%rsi),%xmm0 	 			 
-	movdqa 16(%rsi),%xmm1
-	movdqa 32(%rsi),%xmm2 	 			 
-	movdqa 48(%rsi),%xmm3 	 			 
-	movntdq %xmm0,(%rdi)	 
-	movntdq %xmm1,16(%rdi)	 
-	movntdq %xmm2,32(%rdi)	 
-	movntdq %xmm3,48(%rdi)
-	
-	movdqa 64(%rsi),%xmm0 	 			 
-	movdqa 80(%rsi),%xmm1
-	movdqa 96(%rsi),%xmm2 	 			 
-	movdqa 112(%rsi),%xmm3 	 			 
-	movntdq %xmm0,64(%rdi)	 
-	movntdq %xmm1,80(%rdi)	 
-	movntdq %xmm2,96(%rdi)	 
-	movntdq %xmm3,112(%rdi)
-
-	addq   %rdx,%rdi	
-	addq   %rdx,%rsi
+	prefetch (%rsi) 
+	prefetch 1*64(%rsi)
+	prefetch 2*64(%rsi)
+	prefetch 3*64(%rsi)
+	prefetch 4*64(%rsi)
+	prefetchw (%rdi) 
+	prefetchw 1*64(%rdi) 
+	prefetchw 2*64(%rdi) 
+	prefetchw 3*64(%rdi)
+	prefetchw 4*64(%rdi)
+
+	subq	$3*8,%rsp
+	movq	%rbx,(%rsp)
+	movq	%r12,1*8(%rsp)
+	movq	%r13,2*8(%rsp)
+			
+	movl	$(4096/64)-5,%ecx
+	.p2align 4
+.Loop64:	
+  	dec     %rcx
+
+	movq        (%rsi), %rax
+	movq      8 (%rsi), %rbx
+	movq     16 (%rsi), %rdx
+	movq     24 (%rsi), %r8
+	movq     32 (%rsi), %r9
+	movq     40 (%rsi), %r10
+	movq     48 (%rsi), %r11
+	movq     56 (%rsi), %r12
+
+	prefetch 5*64(%rsi)
+
+	movq     %rax,    (%rdi)
+	movq     %rbx,  8 (%rdi)
+	movq     %rdx, 16 (%rdi)
+	movq     %r8,  24 (%rdi)
+	movq     %r9,  32 (%rdi)
+	movq     %r10, 40 (%rdi)
+	movq     %r11, 48 (%rdi)
+	movq     %r12, 56 (%rdi)
+
+	prefetchw 5*64(%rdi)
+
+	leaq    64 (%rsi), %rsi
+	leaq    64 (%rdi), %rdi
+
+	jnz     .Loop64
+
+	movl	$5,%ecx
+	.p2align 4
+.Loop2:	
 	decl   %ecx
-	jns    loop
-	cmpl   $-1,%ecx
-	je     loop_no_prefetch
 
-	sfence
+	movq        (%rsi), %rax
+	movq      8 (%rsi), %rbx
+	movq     16 (%rsi), %rdx
+	movq     24 (%rsi), %r8
+	movq     32 (%rsi), %r9
+	movq     40 (%rsi), %r10
+	movq     48 (%rsi), %r11
+	movq     56 (%rsi), %r12
+
+	movq     %rax,    (%rdi)
+	movq     %rbx,  8 (%rdi)
+	movq     %rdx, 16 (%rdi)
+	movq     %r8,  24 (%rdi)
+	movq     %r9,  32 (%rdi)
+	movq     %r10, 40 (%rdi)
+	movq     %r11, 48 (%rdi)
+	movq     %r12, 56 (%rdi)
+	
+	leaq	64(%rdi),%rdi			
+	leaq	64(%rsi),%rsi			
+	
+	jnz	.Loop2		
 	
-	movdqa (%rsp),%xmm0
-	movdqa 16(%rsp),%xmm1
-	movdqa 32(%rsp),%xmm2
-	movdqa 48(%rsp),%xmm3
-	movq   %rax,%rsp
+	movq	(%rsp),%rbx
+	movq	1*8(%rsp),%r12
+	movq	2*8(%rsp),%r13
+	addq	$3*8,%rsp
 	ret

arch/x86_64/lib/csum-copy.S

 /*
- * Copyright 2002 Andi Kleen
+ * Copyright 2002,2003 Andi Kleen, SuSE Labs.
  *	
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
@@ -8,7 +8,6 @@
  	#include <linux/linkage.h>
 	#include <asm/errno.h>
 
-//	#define FIX_ALIGNMENT 1
 /*
  * Checksum copy with exception handling.
  * On exceptions src_err_ptr or dst_err_ptr is set to -EFAULT and the 
@@ -26,17 +25,14 @@
  * eax  64bit sum. undefined in case of exception.
  * 
  * Wrappers need to take care of valid exception sum and zeroing.		 
+ * They also should align source or destination to 8 bytes.
  */
 
-/* for now - should vary this based on direction */
- #define prefetch prefetcht2
- #define movnti   movq
-
 	.macro source
 10:
 	.section __ex_table,"a"
 	.align 8
-	.quad 10b,bad_source
+	.quad 10b,.Lbad_source
 	.previous
 	.endm
 		
@@ -44,57 +40,74 @@
 20:
 	.section __ex_table,"a"
 	.align 8
-	.quad 20b,bad_dest
+	.quad 20b,.Lbad_dest
+	.previous
+	.endm
+			
+	.macro ignore L=.Lignore
+30:
+	.section __ex_table,"a"
+	.align 8
+	.quad 30b,\L
 	.previous
 	.endm
 	
+				
 	.globl csum_partial_copy_generic
-	.p2align
+	.p2align 4
 csum_partial_copy_generic:
-	prefetchnta (%rdi)
+	cmpl	 $3*64,%edx
+	jle	 .Lignore
+
+	ignore
+	prefetch (%rdi)
+	ignore
+	prefetch 1*64(%rdi)
+	ignore
+	prefetch 2*64(%rdi)
+	ignore
+	prefetch 3*64(%rdi)
+	ignore
+	prefetch 4*64(%rdi)
+	ignore
+	prefetchw (%rsi)
+	ignore
+	prefetchw 1*64(%rsi)
+	ignore
+	prefetchw 2*64(%rsi)
+	ignore
+	prefetchw 3*64(%rsi)
+	ignore
+	prefetchw 4*64(%rsi)
+
+.Lignore:		
+	subq  $7*8,%rsp
+	movq  %rbx,2*8(%rsp)
+	movq  %r12,3*8(%rsp)
+	movq  %r14,4*8(%rsp)
+	movq  %r13,5*8(%rsp)
+	movq  %rbp,6*8(%rsp)
+
+	movq  %r8,(%rsp)
+	movq  %r9,1*8(%rsp)
 	
-	pushq %rbx
-	pushq %r12
-	pushq %r14
-	pushq %r15
-	movq %r8,%r14
-	movq %r9,%r15
 	movl  %ecx,%eax
 	movl  %edx,%ecx
 
-#ifdef FIX_ALIGNMENT
-	/* align source to 8 bytes */	
-	movl %edi,%r8d
-	andl $7,%r8d
-	jnz  bad_alignment	
-after_bad_alignment:
-#endif
-
-	movl  $64,%r10d
 	xorl  %r9d,%r9d
 	movq  %rcx,%r12
 
 	shrq  $6,%r12
-	/* loopcounter is maintained as one less to test efficiently for the
-	   previous to last iteration. This is needed to stop the prefetching. */
-	decq  %r12
-	js    handle_tail       /* < 64 */
-	jz    loop_no_prefetch  /* = 64 + X */ 
+	jz    .Lhandle_tail       /* < 64 */
+
+	clc
 	
 	/* main loop. clear in 64 byte blocks */
-	/* tries hard not to prefetch over the boundary */
-	/* r10:	64, r9: zero, r8: temp2, rbx: temp1, rax: sum, rcx: saved length */
+	/* r9: zero, r8: temp2, rbx: temp1, rax: sum, rcx: saved length */
 	/* r11:	temp3, rdx: temp4, r12 loopcnt */
-	.p2align
-loop:
-	/* Could prefetch more than one loop, but then it would be even
-	   trickier to avoid prefetching over the boundary. The hardware prefetch
-	   should take care of this anyways. The reason for this prefetch is
-	   just the non temporal hint to avoid cache pollution. Hopefully this
-	   will be handled properly by the hardware. */
-	prefetchnta 64(%rdi) 
-	
-loop_no_prefetch:
+	/* r10:	temp5, rbp: temp6, r14 temp7, r13 temp8 */
+	.p2align 4
+.Lloop:
 	source
 	movq  (%rdi),%rbx
 	source
@@ -104,175 +117,136 @@ loop_no_prefetch:
 	source
 	movq  24(%rdi),%rdx
 
-	dest
-	movnti %rbx,(%rsi)
-	dest
-	movnti %r8,8(%rsi)
-	dest
-	movnti %r11,16(%rsi)
-	dest
-	movnti %rdx,24(%rsi)
+	source
+	movq  32(%rdi),%r10
+	source
+	movq  40(%rdi),%rbp
+	source
+	movq  48(%rdi),%r14
+	source
+	movq  56(%rdi),%r13
 		
-	addq  %rbx,%rax
+	ignore 2f
+	prefetch 5*64(%rdi)
+2:							
+	adcq  %rbx,%rax
 	adcq  %r8,%rax
 	adcq  %r11,%rax
 	adcq  %rdx,%rax
+	adcq  %r10,%rax
+	adcq  %rbp,%rax
+	adcq  %r14,%rax
+	adcq  %r13,%rax
 
-	source
-	movq  32(%rdi),%rbx
-	source
-	movq  40(%rdi),%r8
-	source
-	movq  48(%rdi),%r11
-	source
-	movq  56(%rdi),%rdx
+	decl %r12d
 	
 	dest
-	movnti %rbx,32(%rsi)
+	movq %rbx,(%rsi)
 	dest
-	movnti %r8,40(%rsi)
+	movq %r8,8(%rsi)
 	dest
-	movnti %r11,48(%rsi)
+	movq %r11,16(%rsi)
 	dest
-	movnti %rdx,56(%rsi)
+	movq %rdx,24(%rsi)
 
-	adcq %rbx,%rax
-	adcq %r8,%rax
-	adcq %r11,%rax
-	adcq %rdx,%rax
+	dest
+	movq %r10,32(%rsi)
+	dest
+	movq %rbp,40(%rsi)
+	dest
+	movq %r14,48(%rsi)
+	dest
+	movq %r13,56(%rsi)
 	
-	adcq %r9,%rax	/* add in carry */
+	ignore 3f
+	prefetchw 5*64(%rsi)
+3:
 	
-	addq %r10,%rdi		
-	addq %r10,%rsi
+	leaq 64(%rdi),%rdi
+	leaq 64(%rsi),%rsi
 
-	decq %r12
-	jz   loop_no_prefetch	/* previous to last iteration? */
-	jns  loop
+	jnz   .Lloop
+
+	adcq  %r9,%rax
 
 	/* do last upto 56 bytes */
-handle_tail:
+.Lhandle_tail:
 	/* ecx:	count */
 	movl %ecx,%r10d
 	andl $63,%ecx
 	shrl $3,%ecx
-	jz 	 fold
+	jz 	 .Lfold
 	clc
-	movl $8,%edx
-loop_8:	
+	.p2align 4
+.Lloop_8:	
 	source
 	movq (%rdi),%rbx
 	adcq %rbx,%rax
-	dest
-	movnti %rbx,(%rsi)
-	leaq (%rsi,%rdx),%rsi /* preserve carry */
-	leaq (%rdi,%rdx),%rdi
 	decl %ecx
-	jnz	loop_8
+	dest
+	movq %rbx,(%rsi)
+	leaq 8(%rsi),%rsi /* preserve carry */
+	leaq 8(%rdi),%rdi
+	jnz	.Lloop_8
 	adcq %r9,%rax	/* add in carry */
 
-fold:
+.Lfold:
+	/* reduce checksum to 32bits */
 	movl %eax,%ebx
 	shrq $32,%rax
-	addq %rbx,%rax
+	addl %ebx,%eax
+	adcl %r9d,%eax
 
 	/* do last upto 6 bytes */	
-handle_7:
+.Lhandle_7:
 	movl %r10d,%ecx
 	andl $7,%ecx
 	shrl $1,%ecx
-	jz   handle_1
+	jz   .Lhandle_1
 	movl $2,%edx
 	xorl %ebx,%ebx
 	clc  
-loop_1:	
+	.p2align 4
+.Lloop_1:	
 	source
 	movw (%rdi),%bx
-	adcq %rbx,%rax
+	adcl %ebx,%eax
 	dest
-	movw %bx,(%rsi)
-	addq %rdx,%rdi
-	addq %rdx,%rsi
 	decl %ecx
-	jnz loop_1
-	adcw %r9w,%ax	/* add in carry */
+	movw %bx,(%rsi)
+	leaq 2(%rdi),%rdi
+	leaq 2(%rsi),%rsi
+	jnz .Lloop_1
+	adcl %r9d,%eax	/* add in carry */
 	
 	/* handle last odd byte */
-handle_1:	
+.Lhandle_1:
 	testl $1,%r10d
-	jz    ende
+	jz    .Lende
 	xorl  %ebx,%ebx
 	source
 	movb (%rdi),%bl
 	dest
 	movb %bl,(%rsi)
-	addw %bx,%ax
-	adcw %r9w,%ax		/* carry */
-			
-ende:		
-	sfence
-	popq %r15
-	popq %r14
-	popq %r12
-	popq %rbx
+	addl %ebx,%eax
+	adcl %r9d,%eax		/* carry */
+			
+.Lende:
+	movq 2*8(%rsp),%rbx
+	movq 3*8(%rsp),%r12
+	movq 4*8(%rsp),%r14
+	movq 5*8(%rsp),%r13
+	movq 6*8(%rsp),%rbp
+	addq $7*8,%rsp
 	ret
 
-#ifdef FIX_ALIGNMENT
-	/* align source to 8 bytes. */
-	/* r8d:	unalignedness, ecx len */
-bad_alignment:
-	testl $1,%edi
-	jnz   odd_source
-
-	/* compute distance to next aligned position */
-	movl $8,%r8d
-	xchgl %r8d,%ecx
-	subl %r8d,%ecx
-
-	/* handle unaligned part */
-	shrl $1,%ecx
-	xorl %ebx,%ebx	
-	movl $2,%r10d
-align_loop:
-	source
-	movw (%rdi),%bx
-	addq %rbx,%rax	/* carry cannot happen */
-	dest
-	movw %bx,(%rsi)
-	addq %r10,%rdi
-	addq %r10,%rsi
-	decl %ecx
-	jnz align_loop
-	jmp after_bad_alignment
-
-	/* weird case. need to swap the sum at the end because the spec requires
-	   16 bit words of the sum to be always paired. 
-	   handle it recursively because it should be rather rare. */
-odd_source:
-	/* copy odd byte */
-	xorl %ebx,%ebx
-	source
-	movb (%rdi),%bl
-	addl %ebx,%eax       /* add to old checksum */
-	adcl $0,%ecx
-	dest
-	movb %al,(%rsi)
-	
-	/* fix arguments */
-	movl %eax,%ecx
-	incq %rsi
-	incq %rdi
-	decq %rdx 
-	call csum_partial_copy_generic
-	bswap %eax        /* this should work, but check */
-	jmp ende
-#endif
-
 	/* Exception handlers. Very simple, zeroing is done in the wrappers */
-bad_source:
-	movl $-EFAULT,(%r14)
-	jmp  ende
-	
-bad_dest:
-	movl $-EFAULT,(%r15)
-	jmp ende
+.Lbad_source:
+	movq (%rsp),%rax
+	movl $-EFAULT,(%rax)
+	jmp  .Lende
+	
+.Lbad_dest:
+	movq 8(%rsp),%rax
+	movl $-EFAULT,(%rax)
+	jmp .Lende

arch/x86_64/lib/csum-partial.c

@@ -7,35 +7,39 @@
  
 #include <linux/compiler.h>
 #include <linux/module.h>
+#include <asm/checksum.h>
 
-/* Better way for this sought */
-static inline unsigned short from64to16(unsigned long x)
+#define __force_inline inline __attribute__((always_inline))
+
+static inline unsigned short from32to16(unsigned a) 
 {
-	/* add up 32-bit words for 33 bits */
-	x = (x & 0xffffffff) + (x >> 32);
-	/* add up 16-bit and 17-bit words for 17+c bits */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up 16-bit and 2-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
+	unsigned short b = a >> 16; 
+	asm("addw %w2,%w0\n\t"
+	    "adcw $0,%w0\n" 
+	    : "=r" (b)
+	    : "0" (b), "r" (a));
+	return b;
 }
 
 /*
  * Do a 64-bit checksum on an arbitrary memory area.
  * Returns a 32bit checksum.
  *
- * This isn't a great routine, but it's not _horrible_ either. 
- * We rely on the compiler to unroll.
+ * This isn't as time critical as it used to be because many NICs
+ * do hardware checksumming these days.
+ * 
+ * Things tried and found to not make it faster:
+ * Manual Prefetching
+ * Unrolling to an 128 bytes inner loop.
+ * Using interleaving with more registers to break the carry chains.
  */
-static inline unsigned do_csum(const unsigned char * buff, int len)
+static __force_inline unsigned do_csum(const unsigned char *buff, unsigned len)
 {
-	int odd, count;
+	unsigned odd, count;
 	unsigned long result = 0;
 
-	if (len <= 0)
-		goto out;
+	if (unlikely(len == 0))
+		return result; 
 	odd = 1 & (unsigned long) buff;
 	if (unlikely(odd)) {
 		result = *buff << 8;
@@ -45,7 +49,7 @@ static inline unsigned do_csum(const unsigned char * buff, int len)
 	count = len >> 1;		/* nr of 16-bit words.. */
 	if (count) {
 		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
+			result += *(unsigned short *)buff;
 			count--;
 			len -= 2;
 			buff += 2;
@@ -59,18 +63,41 @@ static inline unsigned do_csum(const unsigned char * buff, int len)
 				buff += 4;
 			}
 			count >>= 1;	/* nr of 64-bit words.. */
-			if (count) {
+
+			/* main loop using 64byte blocks */
 				unsigned long zero = 0; 
-				do {
-					asm("  addq %1,%0\n"
-					    "  adcq %2,%0\n" 
+			unsigned count64 = count >> 3; 
+			while (count64) { 
+				asm("addq 0*8(%[src]),%[res]\n\t"
+				    "adcq 1*8(%[src]),%[res]\n\t"
+				    "adcq 2*8(%[src]),%[res]\n\t"
+				    "adcq 3*8(%[src]),%[res]\n\t"
+				    "adcq 4*8(%[src]),%[res]\n\t"
+				    "adcq 5*8(%[src]),%[res]\n\t"
+				    "adcq 6*8(%[src]),%[res]\n\t"
+				    "adcq 7*8(%[src]),%[res]\n\t"
+				    "adcq %[zero],%[res]"
+				    : [res] "=r" (result)
+				    : [src] "r" (buff), [zero] "r" (zero),
+				    "[res]" (result));
+				buff += 64;
+				count64--;
+			}
+
+			/* last upto 7 8byte blocks */
+			count %= 8; 
+			while (count) { 
+				asm("addq %1,%0\n\t"
+				    "adcq %2,%0\n" 
 					    : "=r" (result)
-					    : "m"  (*buff), "r" (zero),  "0" (result));
-					count--;
+				    : "m" (*(unsigned long *)buff), 
+				    "r" (zero),  "0" (result));
+				--count; 
 					buff += 8;
-				} while (count);
-				result = (result & 0xffffffff) + (result >> 32);
 			}
+			result = add32_with_carry(result>>32,
+						  result&0xffffffff); 
+
 			if (len & 4) {
 				result += *(unsigned int *) buff;
 				buff += 4;
@@ -83,10 +110,11 @@ static inline unsigned do_csum(const unsigned char * buff, int len)
 	}
 	if (len & 1)
 		result += *buff;
-	result = from64to16(result);
-	if (unlikely(odd))
-		return ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
+	result = add32_with_carry(result>>32, result & 0xffffffff); 
+	if (unlikely(odd)) { 
+		result = from32to16(result);
+		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+	}
 	return result;
 }
 
@@ -102,18 +130,11 @@ static inline unsigned do_csum(const unsigned char * buff, int len)
  *
  * it's best to have buff aligned on a 64-bit boundary
  */
-unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
+unsigned csum_partial(const unsigned char *buff, unsigned len, unsigned sum)
 {
-	unsigned result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	asm("addl %1,%0\n\t"
-	    "adcl $0,%0" : "=r" (result) : "r" (sum), "0" (result)); 
-	return result;
+	return add32_with_carry(do_csum(buff, len), sum); 
 }
 
-//EXPORT_SYMBOL(csum_partial);
-
 /*
  * this routine is used for miscellaneous IP-like checksums, mainly
  * in icmp.c
@@ -123,4 +144,3 @@ unsigned short ip_compute_csum(unsigned char * buff, int len)
 	return ~csum_partial(buff,len,0); 
 }
 
-EXPORT_SYMBOL(ip_compute_csum);

arch/x86_64/lib/csum-wrappers.c

-/* Copyright 2002 Andi Kleen, SuSE Labs.
+/* Copyright 2002,2003 Andi Kleen, SuSE Labs.
  * Subject to the GNU Public License v.2
  * 
  * Wrappers of assembly checksum functions for x86-64.
@@ -7,18 +7,6 @@
 #include <asm/checksum.h>
 #include <linux/module.h>
 
-/* Better way for this sought */
-static inline unsigned from64to32(unsigned long x)
-{
-	/* add up 32-bit words for 33 bits */
-        x = (x & 0xffffffff) + (x >> 32);
-        /* add up 16-bit and 17-bit words for 17+c bits */
-        x = (x & 0xffff) + (x >> 16);
-        /* add up 16-bit and 2-bit for 16+c bit */
-        x = (x & 0xffff) + (x >> 16);
-        return x;
-}
-
 /** 
  * csum_partial_copy_from_user - Copy and checksum from user space. 
  * @src: source address (user space) 
@@ -36,14 +24,32 @@ csum_partial_copy_from_user(const char *src, char *dst,
 { 
 	*errp = 0;
 	if (likely(access_ok(VERIFY_READ,src, len))) { 
-		unsigned long sum; 
-		sum = csum_partial_copy_generic(src,dst,len,isum,errp,NULL);
+		/* Why 6, not 7? To handle odd addresses aligned we
+		   would need to do considerable complications to fix the
+		   checksum which is defined as an 16bit accumulator. The
+		   fix alignment code is primarily for performance
+		   compatibility with 32bit and that will handle odd
+		   addresses slowly too. */
+		if (unlikely((unsigned long)src & 6)) {			
+			while (((unsigned long)src & 6) && len >= 2) { 
+				__u16 val16;			
+				*errp = __get_user(val16, (__u16 *)src); 
+				if (*errp)
+					return isum;
+				*(__u16 *)dst = val16;
+				isum = add32_with_carry(isum, val16); 
+				src += 2; 
+				dst += 2; 
+				len -= 2;
+			}
+		}
+		isum = csum_partial_copy_generic(src,dst,len,isum,errp,NULL);
 		if (likely(*errp == 0)) 
-			return from64to32(sum); 
+			return isum;
 	} 
 	*errp = -EFAULT;
 	memset(dst,0,len); 
-	return 0;		
+	return isum;		
 } 
 
 EXPORT_SYMBOL(csum_partial_copy_from_user);
@@ -67,8 +73,22 @@ csum_partial_copy_to_user(const char *src, char *dst,
 		*errp = -EFAULT;
 		return 0; 
 	}
+
+	if (unlikely((unsigned long)dst & 6)) {
+		while (((unsigned long)dst & 6) && len >= 2) { 
+			__u16 val16 = *(__u16 *)src;
+			isum = add32_with_carry(isum, val16);
+			*errp = __put_user(val16, (__u16 *)dst);
+			if (*errp)
+				return isum;
+			src += 2; 
+			dst += 2; 
+			len -= 2;
+		}
+	}
+
 	*errp = 0;
-	return from64to32(csum_partial_copy_generic(src,dst,len,isum,NULL,errp)); 
+	return csum_partial_copy_generic(src,dst,len,isum,NULL,errp); 
 } 
 
 EXPORT_SYMBOL(csum_partial_copy_to_user);
@@ -85,11 +105,9 @@ EXPORT_SYMBOL(csum_partial_copy_to_user);
 unsigned int 
 csum_partial_copy_nocheck(const char *src, char *dst, int len, unsigned int sum)
 { 
-	return from64to32(csum_partial_copy_generic(src,dst,len,sum,NULL,NULL));
+	return csum_partial_copy_generic(src,dst,len,sum,NULL,NULL);
 } 
 
-//EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
 unsigned short csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
 			       __u32 len, unsigned short proto, unsigned int sum) 
 {
@@ -103,7 +121,7 @@ unsigned short csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
 	    "  adcq $0,%[sum]\n"
 	    : [sum] "=r" (sum64) 
 	    : "[sum]" (rest),[saddr] "r" (saddr), [daddr] "r" (daddr));
-	return csum_fold(from64to32(sum64)); 
+	return csum_fold(add32_with_carry(sum64 & 0xffffffff, sum64>>32));
 }
 
 EXPORT_SYMBOL(csum_ipv6_magic);

arch/x86_64/lib/memcpy.S

@@ -12,103 +12,78 @@
  * rax original destination
  */	
 
- // #define FIX_ALIGNMENT
  	.globl __memcpy
 	.globl memcpy
-	.p2align
+	.p2align 4
 __memcpy:
 memcpy:		
 	pushq %rbx
 	movq %rdi,%rax
 
-#ifdef FIX_ALIGNMENT
-	movl %edi,%ecx
-	andl $7,%ecx
-	jnz  bad_alignment	
-after_bad_alignment:
-#endif
+	movl %edx,%ecx
+	shrl $6,%ecx
+	jz .Lhandle_tail
 	
-	movq %rdx,%rcx
-	movl $64,%ebx
-	shrq $6,%rcx
-	jz handle_tail
+	.p2align 4
+.Lloop_64:
+	decl %ecx
 	
-loop_64:
 	movq (%rsi),%r11
 	movq 8(%rsi),%r8
-	movq 2*8(%rsi),%r9
-	movq 3*8(%rsi),%r10
+
 	movq %r11,(%rdi)
 	movq %r8,1*8(%rdi)
+
+	movq 2*8(%rsi),%r9
+	movq 3*8(%rsi),%r10
+
 	movq %r9,2*8(%rdi)
 	movq %r10,3*8(%rdi)
 		
 	movq 4*8(%rsi),%r11
 	movq 5*8(%rsi),%r8
-	movq 6*8(%rsi),%r9
-	movq 7*8(%rsi),%r10
+
 	movq %r11,4*8(%rdi)
 	movq %r8,5*8(%rdi)
+
+	movq 6*8(%rsi),%r9
+	movq 7*8(%rsi),%r10
+
 	movq %r9,6*8(%rdi)
 	movq %r10,7*8(%rdi)
 
-	addq %rbx,%rsi	
-	addq %rbx,%rdi
-	decl %ecx
-	jnz  loop_64
+	leaq 64(%rsi),%rsi
+	leaq 64(%rdi),%rdi
+	jnz  .Lloop_64
 
-handle_tail:
+.Lhandle_tail:
 	movl %edx,%ecx
 	andl $63,%ecx
 	shrl $3,%ecx
-	jz   handle_7
-	movl $8,%ebx
-loop_8: 
+	jz   .Lhandle_7
+	.p2align 4
+.Lloop_8: 
+	decl %ecx
 	movq (%rsi),%r8
 	movq %r8,(%rdi) 
-	addq %rbx,%rdi
-	addq %rbx,%rsi
-	decl %ecx
-	jnz  loop_8
+	leaq 8(%rdi),%rdi
+	leaq 8(%rsi),%rsi
+	jnz  .Lloop_8
 
-handle_7:
+.Lhandle_7:
 	movl %edx,%ecx
 	andl $7,%ecx
-	jz ende
-loop_1:
+	jz .Lende
+	.p2align 4
+.Lloop_1:
 	movb (%rsi),%r8b
 	movb %r8b,(%rdi) 
 	incq %rdi
 	incq %rsi
 	decl %ecx
-	jnz loop_1
+	jnz .Lloop_1
 	
-ende: 	
-	sfence
+.Lende: 	
 	popq %rbx
 	ret
 	
-
-#ifdef FIX_ALIGNMENT
-	/* align destination */
-	/* This is simpleminded. For bigger blocks it may make sense to align
-	   src and dst to their aligned subset and handle the rest separately */
-bad_alignment:
-	movl $8,%r9d
-	subl %ecx,%r9d
-	movl %r9d,%ecx
-	subq %r9,%rdx
-	js   small_alignment
-	jz   small_alignment
-align_1:
-	movb (%rsi),%r8b
-	movb %r8b,(%rdi) 
-	incq %rdi
-	incq %rsi
-	decl %ecx
-	jnz  align_1
-	jmp after_bad_alignment
-small_alignment:
-	addq %r9,%rdx
-	jmp handle_7
-#endif	

arch/x86_64/lib/memset.S

@@ -11,7 +11,7 @@
  */	
  	.globl __memset
 	.globl memset
-	.p2align
+	.p2align 4
 memset:	
 __memset:
 	movq %rdi,%r10
@@ -25,15 +25,16 @@ __memset:
 	/* align dst */
 	movl  %edi,%r9d		
 	andl  $7,%r9d	
-	jnz  bad_alignment
-after_bad_alignment:
+	jnz  .Lbad_alignment
+.Lafter_bad_alignment:
 	
-	movq %r11,%rcx
-	movl $64,%r8d
-	shrq $6,%rcx
-	jz	 handle_tail
+	movl %r11d,%ecx
+	shrl $6,%ecx
+	jz	 .Lhandle_tail
 
-loop_64:	
+	.p2align 4
+.Lloop_64:	
+	decl   %ecx
 	movq  %rax,(%rdi) 
 	movq  %rax,8(%rdi) 
 	movq  %rax,16(%rdi) 
@@ -42,43 +43,45 @@ loop_64:
 	movq  %rax,40(%rdi) 
 	movq  %rax,48(%rdi) 
 	movq  %rax,56(%rdi) 
-	addq    %r8,%rdi
-	decl   %ecx
-	jnz    loop_64
+	leaq  64(%rdi),%rdi
+	jnz    .Lloop_64
 
 	/* Handle tail in loops. The loops should be faster than hard
 	   to predict jump tables. */ 
-handle_tail:
+	.p2align 4	   
+.Lhandle_tail:
 	movl	%r11d,%ecx
 	andl    $63&(~7),%ecx
-	jz 	handle_7
+	jz 		.Lhandle_7
 	shrl	$3,%ecx
-loop_8:
-	movq  %rax,(%rdi) 
-	addq    $8,%rdi
+	.p2align 4
+.Lloop_8:
 	decl   %ecx
-	jnz    loop_8
+	movq  %rax,(%rdi)
+	leaq  8(%rdi),%rdi
+	jnz    .Lloop_8
 
-handle_7:
+.Lhandle_7:
 	movl	%r11d,%ecx
 	andl	$7,%ecx
-	jz      ende
-loop_1:
-	movb 	%al,(%rdi)
-	addq	$1,%rdi
+	jz      .Lende
+	.p2align 4
+.Lloop_1:
 	decl    %ecx
-	jnz     loop_1
+	movb 	%al,(%rdi)
+	leaq	1(%rdi),%rdi
+	jnz     .Lloop_1
 	
-ende:	
+.Lende:	
 	movq	%r10,%rax
 	ret
 
-bad_alignment:
+.Lbad_alignment:
 	cmpq $7,%r11
-	jbe	handle_7
+	jbe	.Lhandle_7
 	movq %rax,(%rdi)	/* unaligned store */
 	movq $8,%r8			
 	subq %r9,%r8 
 	addq %r8,%rdi
 	subq %r8,%r11
-	jmp after_bad_alignment
+	jmp .Lafter_bad_alignment

arch/x86_64/vmlinux.lds.S

@@ -50,10 +50,10 @@ SECTIONS
   .xtime_lock : AT ((LOADADDR(.vsyscall_0) + SIZEOF(.vsyscall_0) + 63) & ~(63)) { *(.xtime_lock) }
   xtime_lock = LOADADDR(.xtime_lock);
   . = ALIGN(16);
-  .hpet : AT ((LOADADDR(.xtime_lock) + SIZEOF(.xtime_lock) + 15) & ~(15)) { *(.hpet) }
-  hpet = LOADADDR(.hpet);
+  .vxtime : AT ((LOADADDR(.xtime_lock) + SIZEOF(.xtime_lock) + 15) & ~(15)) { *(.vxtime) }
+  vxtime = LOADADDR(.vxtime);
   . = ALIGN(16);
-  .wall_jiffies : AT ((LOADADDR(.hpet) + SIZEOF(.hpet) + 15) & ~(15)) { *(.wall_jiffies) }
+  .wall_jiffies : AT ((LOADADDR(.vxtime) + SIZEOF(.vxtime) + 15) & ~(15)) { *(.wall_jiffies) }
   wall_jiffies = LOADADDR(.wall_jiffies);
   . = ALIGN(16);
   .sys_tz : AT ((LOADADDR(.wall_jiffies) + SIZEOF(.wall_jiffies) + 15) & ~(15)) { *(.sys_tz) }
@@ -105,6 +105,7 @@ SECTIONS
   __con_initcall_start = .;
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
+  SECURITY_INIT
   . = ALIGN(4096);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }

drivers/char/rocket.c

@@ -40,23 +40,12 @@
  */
 
 /****** Defines ******/
-#include <linux/config.h>
-#include <linux/version.h>
-
 #ifdef PCI_NUM_RESOURCES
 #define PCI_BASE_ADDRESS(dev, r) ((dev)->resource[r].start)
 #else
 #define PCI_BASE_ADDRESS(dev, r) ((dev)->base_address[r])
 #endif
 
-#ifndef VERSION_CODE
-#  define VERSION_CODE(vers,rel,seq) ( ((vers)<<16) | ((rel)<<8) | (seq) )
-#endif
-
-#if LINUX_VERSION_CODE < VERSION_CODE(2,2,9)	/*  No version < 2.2 */
-#  error "This kernel is too old: not supported by this file"
-#endif
-
 #define ROCKET_PARANOIA_CHECK
 #define ROCKET_DISABLE_SIMUSAGE
 
@@ -72,59 +61,20 @@
 #undef REV_PCI_ORDER
 #undef ROCKET_DEBUG_IO
 
-/*   CAUTION!!!!!  The TIME_STAT Function relies on the Pentium 64 bit
- *    register.  For various reasons related to 1.2.13, the test for this
- *    register is omitted from this driver.  If you are going to enable
- *    this option, make sure you are running a Pentium CPU and that a
- *    cat of /proc/cpuinfo shows ability TS Counters as Yes.  Warning part
- *    done, don't cry to me if you enable this options and things won't
- *    work.  If it gives you any problems, then disable the option.  The code
- *    in this function is pretty straight forward, if it breaks on your
- *    CPU, there is probably something funny about your CPU.
- */
-
-#undef TIME_STAT		/* For performing timing statistics on driver. */
-			/* Produces printks, one every TIME_COUNTER loops, eats */
-			/* some of your CPU time.  Good for testing or */
-			/* other checking, otherwise, leave it undefed */
-			/* Doug Ledford */
-#define TIME_STAT_CPU 100	/* This needs to be set to your processor speed */
-			       /* For example, 100Mhz CPU, set this to 100 */
-#define TIME_COUNTER 180000	/* This is how many iterations to run before */
-			      /* performing the printk statements.   */
-			      /* 6000 = 1 minute, 360000 = 1 hour, etc. */
-			      /* Since time_stat is long long, this */
-			      /* Can be really high if you want :)  */
-#undef TIME_STAT_VERBOSE	/* Undef this if you want a terse log message. */
-
-#if LINUX_VERSION_CODE < VERSION_CODE(2,4,0)
-#define TTY_DRIVER_NO_DEVFS 0
-#endif
-
 #define POLL_PERIOD HZ/100	/*  Polling period .01 seconds (10ms) */
 
 /****** Kernel includes ******/
 
 #ifdef MODVERSIONS
-#if LINUX_VERSION_CODE < VERSION_CODE(2,5,00)
-#include <linux/modversions.h>
-#else
 #include <config/modversions.h>
 #endif				
-#endif				
 
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/major.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
-
-#if LINUX_VERSION_CODE < VERSION_CODE(2,4,0)
-#include <linux/malloc.h>
-#else
 #include <linux/slab.h>
-#endif
-
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
@@ -153,20 +103,8 @@
 #include "rocket_int.h"
 #include "rocket.h"
 
-#ifdef LOCAL_ROCKET_H
-#include "version.h"
-#else
-#define ROCKET_VERSION "2.08"
-#define ROCKET_DATE "02-June-2003"
-#endif				/* LOCAL_ROCKET_H */
-
-/*
- * All of the compatibilty code so we can compile serial.c against
- * older kernels is hidden in rocket_compat.h
- */
-#if defined(LOCAL_ROCKET_H) || (LINUX_VERSION_CODE < VERSION_CODE(2,3,23))
-#include "rocket_compat.h"
-#endif
+#define ROCKET_VERSION "2.09"
+#define ROCKET_DATE "12-June-2003"
 
 /****** RocketPort Local Variables ******/
 
@@ -205,13 +143,6 @@ static int is_PCI[NUM_BOARDS];
 static rocketModel_t rocketModel[NUM_BOARDS];
 static int max_board;
 
-#ifdef TIME_STAT
-static unsigned long long time_stat;
-static unsigned long time_stat_short;
-static unsigned long time_stat_long;
-static unsigned long time_counter;
-#endif
-
 /*
  * The following arrays define the interrupt bits corresponding to each AIOP.
  * These bits are different between the ISA and regular PCI boards and the
@@ -241,7 +172,7 @@ static unsigned char lineNumbers[MAX_RP_PORTS];
 static unsigned long nextLineNumber;
 
 /*****  RocketPort Static Prototypes   *********/
-static int __init init_ISA(int i, int *reserved_controller);
+static int __init init_ISA(int i);
 static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
 static void rp_flush_buffer(struct tty_struct *tty);
 static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
@@ -564,16 +495,6 @@ static void rp_do_poll(unsigned long dummy)
 	unsigned char AiopMask;
 	Word_t bit;
 
-#ifdef TIME_STAT
-	unsigned long low = 0, high = 0, loop_time;
-	unsigned long long time_stat_tmp = 0, time_stat_tmp2 = 0;
-
-      __asm__(".byte 0x0f,0x31":"=a"(low), "=d"(high));
-	time_stat_tmp = high;
-	time_stat_tmp <<= 32;
-	time_stat_tmp += low;
-#endif				/* TIME_STAT */
-
 	/*  Walk through all the boards (ctrl's) */
 	for (ctrl = 0; ctrl < max_board; ctrl++) {
 		if (rcktpt_io_addr[ctrl] <= 0)
@@ -635,48 +556,6 @@ static void rp_do_poll(unsigned long dummy)
 	 */
 	if (atomic_read(&rp_num_ports_open))
 		mod_timer(&rocket_timer, jiffies + POLL_PERIOD);
-
-#ifdef TIME_STAT
-      __asm__(".byte 0x0f,0x31":"=a"(low), "=d"(high));
-	time_stat_tmp2 = high;
-	time_stat_tmp2 <<= 32;
-	time_stat_tmp2 += low;
-	time_stat_tmp2 -= time_stat_tmp;
-	time_stat += time_stat_tmp2;
-	if (time_counter == 0)
-		time_stat_short = time_stat_long = time_stat_tmp2;
-	else {
-		if (time_stat_tmp2 < time_stat_short)
-			time_stat_short = time_stat_tmp2;
-		else if (time_stat_tmp2 > time_stat_long)
-			time_stat_long = time_stat_tmp2;
-	}
-	if (++time_counter == TIME_COUNTER) {
-		loop_time =
-		    (unsigned
-		     long) (((unsigned long) (time_stat >> 32) *
-			     ((unsigned long) (0xffffffff) /
-			      (TIME_STAT_CPU * TIME_COUNTER))) +
-			    ((unsigned long) time_stat /
-			     (TIME_STAT_CPU * TIME_COUNTER)));
-#ifdef TIME_STAT_VERBOSE
-		printk(KERN_INFO "rp_do_poll: Interrupt Timings\n");
-		printk(KERN_INFO "     %5ld iterations; %ld us min,\n",
-		       (long) TIME_COUNTER,
-		       (time_stat_short / TIME_STAT_CPU));
-		printk(KERN_INFO "     %5ld us max, %ld us average per iteration.\n",
-		       (time_stat_long / TIME_STAT_CPU), loop_time);
-		printk(KERN_INFO "We want to use < 5,000 us for an iteration.\n");
-#else				/* TIME_STAT_VERBOSE */
-		printk(KERN_INFO "rp: %ld loops: %ld min, %ld max, %ld us/loop.\n",
-		       (long) TIME_COUNTER,
-		       (time_stat_short / TIME_STAT_CPU),
-		       (time_stat_long / TIME_STAT_CPU), loop_time);
-#endif				/* TIME_STAT_VERBOSE */
-		time_counter = time_stat = 0;
-		time_stat_short = time_stat_long = 0;
-	}
-#endif				/* TIME_STAT */
 }
 
 /*
@@ -762,10 +641,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
 	spin_lock_init(&info->slock);
 	sema_init(&info->write_sem, 1);
 	rp_table[line] = info;
-#if LINUX_VERSION_CODE > VERSION_CODE(2,5,0)
 	if (pci_dev)
 		tty_register_device(rocket_driver, line, &pci_dev->dev);
-#endif
 }
 
 /*
@@ -1039,12 +916,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 	CHANNEL_t *cp;
 	unsigned long page;
 
-#if LINUX_VERSION_CODE > VERSION_CODE(2,5,0)
 	line = TTY_GET_LINE(tty);
-#else
-	line = MINOR(tty->device) - TTY_DRIVER_MINOR_START(tty);
-#endif
-
 	if ((line < 0) || (line >= MAX_RP_PORTS) || ((info = rp_table[line]) == NULL))
 		return -ENXIO;
 
@@ -1070,9 +942,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 	info->tty = tty;
 
 	if (info->count++ == 0) {
-#if ((LINUX_VERSION_CODE < VERSION_CODE(2,5,0)) && defined(MODULE))
-		MOD_INC_USE_COUNT;
-#endif
 		atomic_inc(&rp_num_ports_open);
 
 #ifdef ROCKET_DEBUG_OPEN
@@ -1254,10 +1123,6 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
 	info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE);
 	tty->closing = 0;
 	wake_up_interruptible(&info->close_wait);
-
-#if ((LINUX_VERSION_CODE < VERSION_CODE(2,5,0)) && defined(MODULE))
-	MOD_DEC_USE_COUNT;
-#endif
 	atomic_dec(&rp_num_ports_open);
 
 #ifdef ROCKET_DEBUG_OPEN
@@ -1406,8 +1271,6 @@ static int set_modem_info(struct r_port *info, unsigned int cmd,
 	return 0;
 }
 
-#if LINUX_VERSION_CODE > VERSION_CODE(2,5,0)
-
 /*
  *  Returns the state of the serial modem control lines.  These next 2 functions 
  *  are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
@@ -1450,8 +1313,6 @@ static int rp_tiocmset(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
-#endif /*  Linux > 2.5 */
-
 static int get_config(struct r_port *info, struct rocket_config *retinfo)
 {
 	struct rocket_config tmp;
@@ -1781,12 +1642,8 @@ static void rp_hangup(struct tty_struct *tty)
 	rp_flush_buffer(tty);
 	if (info->flags & ROCKET_CLOSING)
 		return;
-	if (info->count) {
-#if ((LINUX_VERSION_CODE < VERSION_CODE(2,5,0)) && defined(MODULE))
-		MOD_DEC_USE_COUNT;
-#endif
+	if (info->count) 
 		atomic_dec(&rp_num_ports_open);
-	}
 	clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
 
 	info->count = 0;
@@ -2344,17 +2201,9 @@ __init int register_PCI(int i, struct pci_dev *dev)
 	for (aiop = 0; aiop < max_num_aiops; aiop++)
 		ctlp->AiopNumChan[aiop] = ports_per_aiop;
 
-#if LINUX_VERSION_CODE < VERSION_CODE(2,3,99)
-	printk(KERN_INFO "Comtrol PCI controller #%d ID 0x%x found at 0x%lx, "
-	       "%d AIOP(s) (%s)\n", i, dev->device, rcktpt_io_addr[i],
-	       num_aiops, rocketModel[i].modelString);
-#else
-	printk
-	    ("Comtrol PCI controller #%d ID 0x%x found in bus:slot:fn %s at address %04lx, "
+	printk("Comtrol PCI controller #%d ID 0x%x found in bus:slot:fn %s at address %04lx, "
 	     "%d AIOP(s) (%s)\n", i, dev->device, dev->slot_name,
 	     rcktpt_io_addr[i], num_aiops, rocketModel[i].modelString);
-#endif
-
 	printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
 	       rocketModel[i].modelString,
 	       rocketModel[i].startingPortNumber,
@@ -2391,9 +2240,6 @@ __init int register_PCI(int i, struct pci_dev *dev)
 	return (1);
 }
 
-#if LINUX_VERSION_CODE > VERSION_CODE(2,3,99)	/*  Linux version 2.4 and greater */
-
-
 /*
  *  Probes for PCI cards, inits them if found
  *  Input:   board_found = number of ISA boards already found, or the
@@ -2413,51 +2259,6 @@ static int __init init_PCI(int boards_found)
 	return (count);
 }
 
-#else				/*  Linux version 2.2 */
-
-/*
- *  Linux 2.2 pci_find_device() does not allow a search of all devices for a certain vendor,
- *  you have to try each device ID.  Comtrol device ID's are 0x0000 -0x000F for the original
- *  boards.  Newer board are 0x08xx (see upci_ids[]).
- */
-static int __init init_PCI(int boards_found)
-{
-	int j, count = 0;
-	struct pci_dev *dev = NULL;
-
-	static int upci_ids[] = {
-		PCI_DEVICE_ID_URP32INTF,
-		PCI_DEVICE_ID_URP8INTF,
-		PCI_DEVICE_ID_URP16INTF,
-		PCI_DEVICE_ID_CRP16INTF,
-		PCI_DEVICE_ID_URP8OCTA,
-		PCI_DEVICE_ID_UPCI_RM3_8PORT,
-		PCI_DEVICE_ID_UPCI_RM3_4PORT
-	};
-
-#define NUM_UPCI_IDS	(sizeof(upci_ids) / sizeof(upci_ids[0]))
-
-	/*  Try finding devices with PCI ID's 0x0000 - 0x000F */
-	for (j = 0; j < 16; j++) {
-		while ((dev = pci_find_device(PCI_VENDOR_ID_RP, j, dev))) {
-			register_PCI(count + boards_found, dev);
-			count++;
-		}
-	}
-
-	/*  Now try finding the UPCI devices,  which have PCI ID's 0x0800 - 0x080F */
-	for (j = 0; j < NUM_UPCI_IDS; j++) {
-		while ((dev =
-			pci_find_device(PCI_VENDOR_ID_RP, upci_ids[j], dev))) {
-			register_PCI(count + boards_found, dev);
-			count++;
-		}
-	}
-	return (count);
-}
-
-#endif				/*  Linux version 2.2/2.4 */
-
 #endif				/* CONFIG_PCI */
 
 /*
@@ -2465,7 +2266,7 @@ static int __init init_PCI(int boards_found)
  *  Input:   i = the board number to look for
  *  Returns: 1 if board found, 0 else
  */
-static int __init init_ISA(int i, int *reserved_controller)
+static int __init init_ISA(int i)
 {
 	int num_aiops, num_chan = 0, total_num_chan = 0;
 	int aiop, chan;
@@ -2473,20 +2274,16 @@ static int __init init_ISA(int i, int *reserved_controller)
 	CONTROLLER_t *ctlp;
 	char *type_string;
 
-	if (rcktpt_io_addr[i] == 0 || controller == 0)
+	/*  If io_addr is zero, no board configured */
+	if (rcktpt_io_addr[i] == 0)
 		return (0);
 
-	if (check_region(rcktpt_io_addr[i], 64)) {
-		printk(KERN_INFO "RocketPort board address 0x%lx in use...\n", rcktpt_io_addr[i]);
+	/*  Reserve the IO region */
+	if (!request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort")) {
+		printk(KERN_INFO "Unable to reserve IO region for configured ISA RocketPort at address 0x%lx, board not installed...\n", rcktpt_io_addr[i]);
 		rcktpt_io_addr[i] = 0;
 		return (0);
 	}
-	if (rcktpt_io_addr[i] + 0x40 == controller) {
-		*reserved_controller = 1;
-		request_region(rcktpt_io_addr[i], 68, "Comtrol RocketPort");
-	} else {
-		request_region(rcktpt_io_addr[i], 64, "Comtrol RocketPort");
-	}
 
 	ctlp = sCtlNumToCtlPtr(i);
 
@@ -2522,24 +2319,22 @@ static int __init init_ISA(int i, int *reserved_controller)
 	for (aiop = 0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
 		aiopio[aiop] = rcktpt_io_addr[i] + (aiop * 0x400);
 
-	num_aiops =
-	    sInitController(ctlp, i, controller + (i * 0x400), aiopio,  MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
+	num_aiops = sInitController(ctlp, i, controller + (i * 0x400), aiopio,  MAX_AIOPS_PER_BOARD, 0, FREQ_DIS, 0);
 
 	if (ctlp->boardType == ROCKET_TYPE_PC104) {
 		sEnAiop(ctlp, 2);	/* only one AIOPIC, but these */
 		sEnAiop(ctlp, 3);	/* CSels used for other stuff */
 	}
 
+	/*  If something went wrong initing the AIOP's release the ISA IO memory */
 	if (num_aiops <= 0) {
-		if (rcktpt_io_addr[i] + 0x40 == controller) {
-			*reserved_controller = 0;
-			release_region(rcktpt_io_addr[i], 68);
-		} else {
 		release_region(rcktpt_io_addr[i], 64);
-		}
 		rcktpt_io_addr[i] = 0;
 		return (0);
 	}
+  
+	rocketModel[i].startingPortNumber = nextLineNumber;
+
 	for (aiop = 0; aiop < num_aiops; aiop++) {
 		sResetAiopByNum(ctlp, aiop);
 		sEnAiop(ctlp, aiop);
@@ -2565,9 +2360,9 @@ static int __init init_ISA(int i, int *reserved_controller)
 	rocketModel[i].numPorts = total_num_chan;
 	rocketModel[i].model = MODEL_ISA;
 
-	printk(KERN_INFO "Comtrol ISA controller #%d found at 0x%lx, "
-	       "%d AIOPs %s\n", i, rcktpt_io_addr[i], num_aiops,
-	       type_string);
+	printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n", 
+	       i, rcktpt_io_addr[i], num_aiops, type_string);
+
 	printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
 	       rocketModel[i].modelString,
 	       rocketModel[i].startingPortNumber,
@@ -2595,10 +2390,8 @@ static struct tty_operations rocket_ops = {
 	.break_ctl = rp_break,
 	.send_xchar = rp_send_xchar,
 	.wait_until_sent = rp_wait_until_sent,
-#if (LINUX_VERSION_CODE > VERSION_CODE(2,5,0))
 	.tiocmget = rp_tiocmget,
 	.tiocmset = rp_tiocmset,
-#endif /* Kernel > 2.5 */
 };
 
 /*
@@ -2607,7 +2400,6 @@ static struct tty_operations rocket_ops = {
 int __init rp_init(void)
 {
 	int retval, pci_boards_found, isa_boards_found, i;
-	int reserved_controller = 0;
 
 	printk(KERN_INFO "RocketPort device driver module, version %s, %s\n",
 	       ROCKET_VERSION, ROCKET_DATE);
@@ -2634,12 +2426,20 @@ int __init rp_init(void)
 	nextLineNumber = 0;
 	memset(rocketModel, 0, sizeof (rocketModel));
 
-	if (board1 && controller == 0)
+	/*
+	 *  If board 1 is non-zero, there is at least one ISA configured.  If controller is 
+	 *  zero, use the default controller IO address of board1 + 0x40.
+	 */
+	if (board1) {
+		if (controller == 0)
 			controller = board1 + 0x40;
+	} else {
+		controller = 0;  /*  Used as a flag, meaning no ISA boards */
+	}
 
-	if (controller && check_region(controller, 4)) {
-		printk(KERN_INFO "Controller IO addresses in use, unloading driver.\n");
-		put_tty_driver(rocket_driver);
+	/*  If an ISA card is configured, reserve the 4 byte IO space for the Mudbac controller */
+	if (controller && (!request_region(controller, 4, "Comtrol RocketPort"))) {
+		printk(KERN_INFO "Unable to reserve IO region for first configured ISA RocketPort controller 0x%lx.  Driver exiting \n", controller);
 		return -EBUSY;
 	}
 
@@ -2663,9 +2463,7 @@ int __init rp_init(void)
 	 * driver with the tty layer.
 	 */
 
-#if (LINUX_VERSION_CODE > VERSION_CODE(2,5,0))
 	rocket_driver->owner = THIS_MODULE;
-#endif /* Kernel > 2.5 */
 	rocket_driver->flags = TTY_DRIVER_NO_DEVFS;
 	rocket_driver->devfs_name = "tts/R";
 	rocket_driver->name = "ttyR";
@@ -2701,7 +2499,7 @@ int __init rp_init(void)
 	pci_boards_found = 0;
 
 	for (i = 0; i < NUM_BOARDS; i++) {
-		if (init_ISA(i, &reserved_controller))
+		if (init_ISA(i))
 			isa_boards_found++;
 	}
 
@@ -2720,13 +2518,6 @@ int __init rp_init(void)
 		return -ENXIO;
 	}
 
-	if (isa_boards_found) {
-		if (reserved_controller == 0)
-			request_region(controller, 4, "Comtrol RocketPort");
-	} else {
-		controller = 0;
-	}
-
 	return 0;
 }
 
@@ -2736,7 +2527,6 @@ static void rp_cleanup_module(void)
 {
 	int retval;
 	int i;
-	int released_controller = 0;
 
 	del_timer_sync(&rocket_timer);
 
@@ -2754,14 +2544,9 @@ static void rp_cleanup_module(void)
 	for (i = 0; i < NUM_BOARDS; i++) {
 		if (rcktpt_io_addr[i] <= 0 || is_PCI[i])
 			continue;
-		if (rcktpt_io_addr[i] + 0x40 == controller) {
-			released_controller++;
-			release_region(rcktpt_io_addr[i], 68);
-		} else {
 		release_region(rcktpt_io_addr[i], 64);
 	}
-	}
-	if (controller && released_controller == 0)
+	if (controller)
 		release_region(controller, 4);
 }
 #endif

drivers/char/rocket.h

 /*
- * rocket.h --- the exported interface of the rocket driver to
- * its configuration program.
+ * rocket.h --- the exported interface of the rocket driver to its configuration program.
  *
  * Written by Theodore Ts'o, Copyright 1997.
- *
- * Copyright 1994, 1997, 2003 Comtrol Corporation.    All Rights Reserved.
- * 
- * The following source code is subject to Comtrol Corporation's
- * Developer's License Agreement.
- * 
- * This source code is protected by United States copyright law and 
- * international copyright treaties.
- * 
- * This source code may only be used to develop software products that
- * will operate with Comtrol brand hardware.
- * 
- * You may not reproduce nor distribute this source code in its original
- * form but must produce a derivative work which includes portions of
- * this source code only.
- * 
- * The portions of this source code which you use in your derivative
- * work must bear Comtrol's copyright notice:
- * 
- * 		Copyright 1994 Comtrol Corporation.
+ * Copyright 1997 Comtrol Corporation. 
  *
  */
 

drivers/char/rocket_int.h

@@ -2,26 +2,7 @@
  * rocket_int.h --- internal header file for rocket.c
  *
  * Written by Theodore Ts'o, Copyright 1997.
- *
- * Copyright 1994, 1997, 2003 Comtrol Corporation.    All Rights Reserved.
- * 
- * The following source code is subject to Comtrol Corporation's
- * Developer's License Agreement.
- * 
- * This source code is protected by United States copyright law and 
- * international copyright treaties.
- * 
- * This source code may only be used to develop software products that
- * will operate with Comtrol brand hardware.
- * 
- * You may not reproduce nor distribute this source code in its original
- * form but must produce a derivative work which includes portions of
- * this source code only.
- * 
- * The portions of this source code which you use in your derivative
- * work must bear Comtrol's copyright notice:
- * 
- * 		Copyright 1994 Comtrol Corporation.
+ * Copyright 1997 Comtrol Corporation.  
  * 
  */
 
@@ -98,17 +79,9 @@ static inline unsigned short sInW(unsigned short port)
 #define sInW(a) (inw_p(a))
 #endif				/* ROCKET_DEBUG_IO */
 
-/* This is used to move arrays of bytes so byte swapping isn't
- * appropriate.  On Linux 2.3 and above outsw is the same as
- * outsw_ns, but we use the old form for compatibility with
- * old kernels. */
-#if  defined(__BIG_ENDIAN) && (LINUX_VERSION_CODE < VERSION_CODE(2,3,0))
-#define sOutStrW(port, addr, count) if (count) outsw_ns(port, addr, count)
-#define sInStrW(port, addr, count) if (count) insw_ns(port, addr, count)
-#else
+/* This is used to move arrays of bytes so byte swapping isn't appropriate. */
 #define sOutStrW(port, addr, count) if (count) outsw(port, addr, count)
 #define sInStrW(port, addr, count) if (count) insw(port, addr, count)
-#endif
 
 #define CTL_SIZE 8
 #define AIOP_CTL_SIZE 4
@@ -1318,11 +1291,7 @@ struct r_port {
 /* Compact PCI device */ 
 #define PCI_DEVICE_ID_CRP16INTF		0x0903	/* Rocketport Compact PCI 16 port w/external I/F */
 
-/*  Taking care of some kernel incompatibilities... */
-#if LINUX_VERSION_CODE > VERSION_CODE(2,5,68)
-
 #define TTY_GET_LINE(t) t->index
-
 #define TTY_DRIVER_MINOR_START(t) t->driver->minor_start
 #define TTY_DRIVER_SUBTYPE(t) t->driver->subtype
 #define TTY_DRIVER_NAME(t) t->driver->name
@@ -1330,15 +1299,4 @@ struct r_port {
 #define TTY_DRIVER_FLUSH_BUFFER_EXISTS(t) t->driver->flush_buffer
 #define TTY_DRIVER_FLUSH_BUFFER(t) t->driver->flush_buffer(t)
 
-#else
 
-#define TTY_GET_LINE(t) minor(t->device) - TTY_DRIVER_MINOR_START(t)
-
-#define TTY_DRIVER_MINOR_START(t) t->driver.minor_start
-#define TTY_DRIVER_SUBTYPE(t) t->driver.subtype
-#define TTY_DRIVER_NAME(t) t->driver.name
-#define TTY_DRIVER_NAME_BASE(t) t->driver.name_base
-#define TTY_DRIVER_FLUSH_BUFFER_EXISTS(t) t->driver.flush_buffer
-#define TTY_DRIVER_FLUSH_BUFFER(t) t->driver.flush_buffer(t)
-
-#endif

drivers/ieee1394/dv1394.c

@@ -2289,16 +2289,15 @@ static void ir_tasklet_func(unsigned long data)
 			/* get the descriptor based on packet_buffer cursor */
 			f = video->frames[video->current_packet / MAX_PACKETS];
 			block = &(f->descriptor_pool[video->current_packet % MAX_PACKETS]);
-			xferstatus = le16_to_cpu(block->u.in.il.q[3] >> 16);
+			xferstatus = le32_to_cpu(block->u.in.il.q[3]) >> 16;
 			xferstatus &= 0x1F;
+			irq_printk("ir_tasklet_func: xferStatus/resCount [%d] = 0x%08x\n", i, le32_to_cpu(block->u.in.il.q[3]) );
 
 			/* get the current frame */
 			f = video->frames[video->active_frame];
 		
 			/* exclude empty packet */
 			if (packet_length > 8 && xferstatus == 0x11) {
-				irq_printk("ir_tasklet_func: xferStatus/resCount [%d] = 0x%08x\n", i, le32_to_cpu(block->u.in.il.q[3]) );
-			
 				/* check for start of frame */
 				/* DRD> Changed to check section type ([0]>>5==0) 
 				   and dif sequence ([1]>>4==0) */
@@ -2380,7 +2379,7 @@ static void ir_tasklet_func(unsigned long data)
 			} else {
 				prev->u.in.il.q[0] |= 3 << 20; /* enable interrupt */
 			}
-			prev->u.in.il.q[2] =  (cpu_to_le32(next_dma) | 1); /* set Z=1 */
+			prev->u.in.il.q[2] = cpu_to_le32(next_dma | 1); /* set Z=1 */
 			wmb();
 
 			/* wake up DMA in case it fell asleep */

drivers/ieee1394/eth1394.c

@@ -86,7 +86,7 @@
 #define TRACE() printk(KERN_ERR "eth1394:%s[%d] ---- TRACE\n", __FUNCTION__, __LINE__)
 
 static char version[] __devinitdata =
-	"$Rev: 945 $ Ben Collins <bcollins@debian.org>";
+	"$Rev: 951 $ Ben Collins <bcollins@debian.org>";
 
 struct fragment_info {
 	struct list_head list;
@@ -1424,6 +1424,12 @@ static int ether1394_tx (struct sk_buff *skb, struct net_device *dev)
 	struct packet_task *ptask;
 	struct node_entry *ne;
 
+	if (skb_is_nonlinear(skb)) {
+		ret = skb_linearize(skb, kmflags);
+		if(ret)
+			goto fail;
+	}
+
 	ptask = kmem_cache_alloc(packet_task_cache, kmflags);
 	if(ptask == NULL) {
 		ret = -ENOMEM;

drivers/ieee1394/ohci1394.c

@@ -164,7 +164,7 @@ printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args)
 printk(level "%s_%d: " fmt "\n" , OHCI1394_DRIVER_NAME, card , ## args)
 
 static char version[] __devinitdata =
-	"$Rev: 938 $ Ben Collins <bcollins@debian.org>";
+	"$Rev: 948 $ Ben Collins <bcollins@debian.org>";
 
 /* Module Parameters */
 static int phys_dma = 1;

drivers/pci/pci.ids

@@ -3752,6 +3752,8 @@
 	0005  Rocketport 8 port w/octa cable
 	0006  Rocketport 8 port w/RJ11 connectors
 	0007  Rocketport 4 port w/RJ11 connectors
+	0008  Rocketport 8 port w/ DB78 SNI (Siemens) connector
+	0009  Rocketport 16 port w/ DB78 SNI (Siemens) connector
 	000a  Rocketport Plus 4 port
 	000b  Rocketport Plus 8 port
 	000c  RocketModem 6 port

drivers/scsi/scsi_scan.c

@@ -619,12 +619,12 @@ static int scsi_add_lun(Scsi_Device *sdev, char *inq_result, int *bflags)
 	if (inq_result[7] & 0x10)
 		sdev->sdtr = 1;
 
-	scsi_device_register(sdev);
-
 	sprintf(sdev->devfs_name, "scsi/host%d/bus%d/target%d/lun%d",
 				sdev->host->host_no, sdev->channel,
 				sdev->id, sdev->lun);
 
+	scsi_device_register(sdev);
+
 	/*
 	 * End driverfs/devfs code.
 	 */

fs/fs-writeback.c

@@ -260,8 +260,21 @@ sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc)
 		struct address_space *mapping = inode->i_mapping;
 		struct backing_dev_info *bdi = mapping->backing_dev_info;
 
-		if (bdi->memory_backed)
+		if (bdi->memory_backed) {
+			if (sb == blockdev_superblock) {
+				/*
+				 * Dirty memory-backed blockdev: the ramdisk
+				 * driver does this.
+				 */
+				list_move(&inode->i_list, &sb->s_dirty);
+				continue;
+			}
+			/*
+			 * Assume that all inodes on this superblock are memory
+			 * backed.  Skip the superblock.
+			 */
 			break;
+		}
 
 		if (wbc->nonblocking && bdi_write_congested(bdi)) {
 			wbc->encountered_congestion = 1;

fs/namei.c

@@ -325,7 +325,7 @@ static inline int exec_permission_lite(struct inode *inode)
 
 	return -EACCES;
 ok:
-	return security_inode_permission_lite(inode, MAY_EXEC);
+	return security_inode_permission(inode, MAY_EXEC);
 }
 
 /*

include/asm-generic/vmlinux.lds.h

@@ -45,3 +45,9 @@
 		*(__ksymtab_strings)					\
 	}
 
+#define SECURITY_INIT							\
+	.security_initcall.init : {					\
+		__security_initcall_start = .;				\
+		*(.security_initcall.init) 				\
+		__security_initcall_end = .;				\
+	}

include/asm-i386/fixmap.h

@@ -107,6 +107,14 @@ extern void __set_fixmap (enum fixed_addresses idx,
 #define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
 #define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
 
+/*
+ * This is the range that is readable by user mode, and things
+ * acting like user mode such as get_user_pages.
+ */
+#define FIXADDR_USER_START	(__fix_to_virt(FIX_VSYSCALL))
+#define FIXADDR_USER_END	(FIXADDR_USER_START + PAGE_SIZE)
+
+
 extern void __this_fixmap_does_not_exist(void);
 
 /*

include/asm-x86_64/checksum.h

@@ -125,7 +125,7 @@ csum_tcpudp_magic(unsigned long saddr, unsigned long daddr,
  * Before filling it in it needs to be csum_fold()'ed.
  * buff should be aligned to a 64bit boundary if possible.
  */ 
-extern unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum);
+extern unsigned int csum_partial(const unsigned char *buff, unsigned len, unsigned int sum);
 
 #define  _HAVE_ARCH_COPY_AND_CSUM_FROM_USER 1
 #define HAVE_CSUM_COPY_USER 1
@@ -179,4 +179,14 @@ extern unsigned short
 csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
 		__u32 len, unsigned short proto, unsigned int sum);
 
+static inline unsigned add32_with_carry(unsigned a, unsigned b)
+{
+	asm("addl %2,%0\n\t"
+	    "adcl $0,%0" 
+	    : "=r" (a) 
+	    : "0" (a), "r" (b));
+	return a;
+}
+
 #endif
+

include/asm-x86_64/fixmap.h

@@ -35,6 +35,8 @@
 enum fixed_addresses {
 	VSYSCALL_LAST_PAGE,
 	VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
+	VSYSCALL_HPET,
+	FIX_HPET_BASE,
 #ifdef CONFIG_X86_LOCAL_APIC
 	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
 #endif

include/asm-x86_64/mc146818rtc.h

@@ -24,6 +24,11 @@ outb_p((addr),RTC_PORT(0)); \
 outb_p((val),RTC_PORT(1)); \
 })
 
+#ifndef CONFIG_HPET_TIMER
 #define RTC_IRQ 8
+#else
+/* Temporary workaround due to IRQ routing problem. */
+#define RTC_IRQ 0
+#endif
 
 #endif /* _ASM_MC146818RTC_H */

include/asm-x86_64/processor.h

@@ -313,7 +313,7 @@ extern inline void sync_core(void)
 #define ARCH_HAS_PREFETCH
 static inline void prefetch(void *x) 
 { 
-	asm volatile("2: prefetchnta %0\n1:\t" 
+	asm volatile("2: prefetcht0 %0\n1:\t" 
 		    ".section __ex_table,\"a\"\n\t"
 		    "  .align 8\n\t"
 		    "  .quad  2b,1b\n\t"

include/asm-x86_64/proto.h

@@ -54,6 +54,8 @@ extern void swap_low_mappings(void);
 extern void oops_begin(void);
 extern void die(const char *,struct pt_regs *,long);
 extern void __die(const char * str, struct pt_regs * regs, long err);
+extern void __show_regs(struct pt_regs * regs);
+extern void show_regs(struct pt_regs * regs);
 
 extern int map_syscall32(struct mm_struct *mm, unsigned long address);
 extern char *syscall32_page;

include/asm-x86_64/timex.h

@@ -30,6 +30,34 @@ static inline cycles_t get_cycles (void)
 
 extern unsigned int cpu_khz;
 
-extern struct hpet_data hpet;
+/*
+ * Documentation on HPET can be found at:
+ *      http://www.intel.com/ial/home/sp/pcmmspec.htm
+ *      ftp://download.intel.com/ial/home/sp/mmts098.pdf
+ */
+
+#define HPET_ID		0x000
+#define HPET_PERIOD	0x004
+#define HPET_CFG	0x010
+#define HPET_STATUS	0x020
+#define HPET_COUNTER	0x0f0
+#define HPET_T0_CFG	0x100
+#define HPET_T0_CMP	0x108
+#define HPET_T0_ROUTE	0x110
+
+#define HPET_ID_VENDOR	0xffff0000
+#define HPET_ID_LEGSUP	0x00008000
+#define HPET_ID_NUMBER	0x00000f00
+#define HPET_ID_REV	0x000000ff
+
+#define HPET_CFG_ENABLE	0x001
+#define HPET_CFG_LEGACY	0x002
+
+#define HPET_T0_ENABLE		0x004
+#define HPET_T0_PERIODIC	0x008
+#define HPET_T0_SETVAL		0x040
+#define HPET_T0_32BIT		0x100
+
+extern struct vxtime_data vxtime;
 
 #endif

include/asm-x86_64/vsyscall.h

@@ -15,7 +15,7 @@ enum vsyscall_num {
 
 #ifdef __KERNEL__
 
-#define __section_hpet __attribute__ ((unused, __section__ (".hpet"), aligned(16)))
+#define __section_vxtime __attribute__ ((unused, __section__ (".vxtime"), aligned(16)))
 #define __section_wall_jiffies __attribute__ ((unused, __section__ (".wall_jiffies"), aligned(16)))
 #define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16)))
 #define __section_sys_tz __attribute__ ((unused, __section__ (".sys_tz"), aligned(16)))
@@ -23,22 +23,24 @@ enum vsyscall_num {
 #define __section_xtime __attribute__ ((unused, __section__ (".xtime"), aligned(16)))
 #define __section_xtime_lock __attribute__ ((unused, __section__ (".xtime_lock"), aligned(L1_CACHE_BYTES)))
 
+#define VXTIME_TSC	1
+#define VXTIME_HPET	2
 
-struct hpet_data {
-	long address;		/* base address */
+struct vxtime_data {
+	long hpet_address;	/* HPET base address */
 	unsigned long hz;	/* HPET clocks / sec */
-	int trigger;		/* value at last interrupt */
 	int last;
-	int offset;
 	unsigned long last_tsc;
-	long ticks;
+	long quot;
+	long tsc_quot;
+	int mode;
 };
 
 #define hpet_readl(a)           readl(fix_to_virt(FIX_HPET_BASE) + a)
 #define hpet_writel(d,a)        writel(d, fix_to_virt(FIX_HPET_BASE) + a)
 
 /* vsyscall space (readonly) */
-extern struct hpet_data __hpet;
+extern struct vxtime_data __vxtime;
 extern struct timespec __xtime;
 extern volatile unsigned long __jiffies;
 extern unsigned long __wall_jiffies;
@@ -46,7 +48,7 @@ extern struct timezone __sys_tz;
 extern seqlock_t __xtime_lock;
 
 /* kernel space (writeable) */
-extern struct hpet_data hpet;
+extern struct vxtime_data vxtime;
 extern unsigned long wall_jiffies;
 extern struct timezone sys_tz;
 extern int sysctl_vsyscall;

include/linux/init.h

@@ -64,6 +64,7 @@ typedef int (*initcall_t)(void);
 typedef void (*exitcall_t)(void);
 
 extern initcall_t __con_initcall_start, __con_initcall_end;
+extern initcall_t __security_initcall_start, __security_initcall_end;
 #endif
   
 #ifndef MODULE
@@ -96,6 +97,9 @@ extern initcall_t __con_initcall_start, __con_initcall_end;
 #define console_initcall(fn) \
 	static initcall_t __initcall_##fn __attribute__ ((unused,__section__ (".con_initcall.init")))=fn
 
+#define security_initcall(fn) \
+	static initcall_t __initcall_##fn __attribute__ ((unused,__section__ (".security_initcall.init"))) = fn
+
 struct obs_kernel_param {
 	const char *str;
 	int (*setup_func)(char *);
@@ -143,6 +147,8 @@ struct obs_kernel_param {
 #define device_initcall(fn)		module_init(fn)
 #define late_initcall(fn)		module_init(fn)
 
+#define security_initcall(fn)		module_init(fn)
+
 /* These macros create a dummy inline: gcc 2.9x does not count alias
  as usage, hence the `unused function' warning when __init functions
  are declared static. We use the dummy __*_module_inline functions

include/linux/pci_ids.h

@@ -1399,6 +1399,8 @@
 #define PCI_DEVICE_ID_RP8OCTA		0x0005
 #define PCI_DEVICE_ID_RP8J		0x0006
 #define PCI_DEVICE_ID_RP4J		0x0007
+#define PCI_DEVICE_ID_RP8SNI		0x0008	
+#define PCI_DEVICE_ID_RP16SNI		0x0009	
 #define PCI_DEVICE_ID_RPP4		0x000A
 #define PCI_DEVICE_ID_RPP8		0x000B
 #define PCI_DEVICE_ID_RP8M		0x000C

include/linux/security.h

@@ -46,7 +46,6 @@ extern void cap_capset_set (struct task_struct *target, kernel_cap_t *effective,
 extern int cap_bprm_set_security (struct linux_binprm *bprm);
 extern void cap_bprm_compute_creds (struct linux_binprm *bprm);
 extern int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid, int flags);
-extern void cap_task_kmod_set_label (void);
 extern void cap_task_reparent_to_init (struct task_struct *p);
 extern int cap_syslog (int type);
 
@@ -328,16 +327,6 @@ struct swap_info_struct;
  *	@inode contains the inode structure to check.
  *	@mask contains the permission mask.
  *	Return 0 if permission is granted.
- * @inode_permission_lite:
- * 	Check permission before accessing an inode.  This hook is
- * 	currently only called when checking MAY_EXEC access during
- * 	pathname resolution.  The dcache lock is held and thus modules
- * 	that could sleep or contend the lock should return -EAGAIN to
- * 	inform the kernel to drop the lock and try again calling the
- * 	full permission hook.
- * 	@inode contains the inode structure to check.
- * 	@mask contains the permission mask.
- * 	Return 0 if permission is granted.
  * @inode_setattr:
  *	Check permission before setting file attributes.  Note that the kernel
  *	call to notify_change is performed from several locations, whenever
@@ -607,10 +596,6 @@ struct swap_info_struct;
  *	@arg4 contains a argument.
  *	@arg5 contains a argument.
  *	Return 0 if permission is granted.
- * @task_kmod_set_label:
- *	Set the security attributes in current->security for the kernel module
- *	loader thread, so that it has the permissions needed to perform its
- *	function.
  * @task_reparent_to_init:
  * 	Set the security attributes in @p->security for a kernel thread that
  * 	is being reparented to the init task.
@@ -1057,7 +1042,6 @@ struct security_operations {
 	int (*inode_readlink) (struct dentry *dentry);
 	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
 	int (*inode_permission) (struct inode *inode, int mask);
-	int (*inode_permission_lite) (struct inode *inode, int mask);
 	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
 	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
         void (*inode_delete) (struct inode *inode);
@@ -1111,7 +1095,6 @@ struct security_operations {
 	int (*task_prctl) (int option, unsigned long arg2,
 			   unsigned long arg3, unsigned long arg4,
 			   unsigned long arg5);
-	void (*task_kmod_set_label) (void);
 	void (*task_reparent_to_init) (struct task_struct * p);
 	void (*task_to_inode)(struct task_struct *p, struct inode *inode);
 
@@ -1471,12 +1454,6 @@ static inline int security_inode_permission (struct inode *inode, int mask)
 	return security_ops->inode_permission (inode, mask);
 }
 
-static inline int security_inode_permission_lite (struct inode *inode,
-						  int mask)
-{
-	return security_ops->inode_permission_lite (inode, mask);
-}
-
 static inline int security_inode_setattr (struct dentry *dentry,
 					  struct iattr *attr)
 {
@@ -1692,11 +1669,6 @@ static inline int security_task_prctl (int option, unsigned long arg2,
 	return security_ops->task_prctl (option, arg2, arg3, arg4, arg5);
 }
 
-static inline void security_task_kmod_set_label (void)
-{
-	security_ops->task_kmod_set_label ();
-}
-
 static inline void security_task_reparent_to_init (struct task_struct *p)
 {
 	security_ops->task_reparent_to_init (p);
@@ -2108,12 +2080,6 @@ static inline int security_inode_permission (struct inode *inode, int mask)
 	return 0;
 }
 
-static inline int security_inode_permission_lite (struct inode *inode,
-						  int mask)
-{
-	return 0;
-}
-
 static inline int security_inode_setattr (struct dentry *dentry,
 					  struct iattr *attr)
 {
@@ -2321,11 +2287,6 @@ static inline int security_task_prctl (int option, unsigned long arg2,
 	return 0;
 }
 
-static inline void security_task_kmod_set_label (void)
-{
-	cap_task_kmod_set_label ();
-}
-
 static inline void security_task_reparent_to_init (struct task_struct *p)
 {
 	cap_task_reparent_to_init (p);

init/main.c

@@ -439,8 +439,8 @@ asmlinkage void __init start_kernel(void)
 	pte_chain_init();
 	fork_init(num_physpages);
 	proc_caches_init();
-	security_scaffolding_startup();
 	buffer_init();
+	security_scaffolding_startup();
 	vfs_caches_init(num_physpages);
 	radix_tree_init();
 	signals_init();

kernel/sys.c

@@ -831,13 +831,11 @@ asmlinkage long sys_getresgid(gid_t *rgid, gid_t *egid, gid_t *sgid)
 asmlinkage long sys_setfsuid(uid_t uid)
 {
 	int old_fsuid;
-	int retval;
-
-	retval = security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
-	if (retval)
-		return retval;
 
 	old_fsuid = current->fsuid;
+	if (security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS))
+		return old_fsuid;
+
 	if (uid == current->uid || uid == current->euid ||
 	    uid == current->suid || uid == current->fsuid || 
 	    capable(CAP_SETUID))
@@ -850,9 +848,7 @@ asmlinkage long sys_setfsuid(uid_t uid)
 		current->fsuid = uid;
 	}
 
-	retval = security_task_post_setuid(old_fsuid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
-	if (retval)
-		return retval;
+	security_task_post_setuid(old_fsuid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
 
 	return old_fsuid;
 }
@@ -863,13 +859,11 @@ asmlinkage long sys_setfsuid(uid_t uid)
 asmlinkage long sys_setfsgid(gid_t gid)
 {
 	int old_fsgid;
-	int retval;
-
-	retval = security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS);
-	if (retval)
-		return retval;
 
 	old_fsgid = current->fsgid;
+	if (security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS))
+		return old_fsgid;
+
 	if (gid == current->gid || gid == current->egid ||
 	    gid == current->sgid || gid == current->fsgid || 
 	    capable(CAP_SETGID))

mm/memory.c

@@ -689,15 +689,16 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 
 		vma = find_extend_vma(mm, start);
 
-#ifdef FIXADDR_START
-		if (!vma && start >= FIXADDR_START && start < FIXADDR_TOP) {
+#ifdef FIXADDR_USER_START
+		if (!vma &&
+		    start >= FIXADDR_USER_START && start < FIXADDR_USER_END) {
 			static struct vm_area_struct fixmap_vma = {
 				/* Catch users - if there are any valid
 				   ones, we can make this be "&init_mm" or
 				   something.  */
 				.vm_mm = NULL,
-				.vm_start = FIXADDR_START,
-				.vm_end = FIXADDR_TOP,
+				.vm_start = FIXADDR_USER_START,
+				.vm_end = FIXADDR_USER_END,
 				.vm_page_prot = PAGE_READONLY,
 				.vm_flags = VM_READ | VM_EXEC,
 			};
@@ -705,6 +706,8 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 			pgd_t *pgd;
 			pmd_t *pmd;
 			pte_t *pte;
+			if (write) /* user fixmap pages are read-only */
+				return i ? : -EFAULT;
 			pgd = pgd_offset_k(pg);
 			if (!pgd)
 				return i ? : -EFAULT;
@@ -712,8 +715,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 			if (!pmd)
 				return i ? : -EFAULT;
 			pte = pte_offset_kernel(pmd, pg);
-			if (!pte || !pte_present(*pte) || !pte_user(*pte) ||
-			    !(write ? pte_write(*pte) : pte_read(*pte)))
+			if (!pte || !pte_present(*pte))
 				return i ? : -EFAULT;
 			if (pages) {
 				pages[i] = pte_page(*pte);

security/capability.c

@@ -248,12 +248,6 @@ int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid,
 	return 0;
 }
 
-void cap_task_kmod_set_label (void)
-{
-	cap_set_full (current->cap_effective);
-	return;
-}
-
 void cap_task_reparent_to_init (struct task_struct *p)
 {
 	p->cap_effective = CAP_INIT_EFF_SET;
@@ -278,7 +272,6 @@ EXPORT_SYMBOL(cap_capset_set);
 EXPORT_SYMBOL(cap_bprm_set_security);
 EXPORT_SYMBOL(cap_bprm_compute_creds);
 EXPORT_SYMBOL(cap_task_post_setuid);
-EXPORT_SYMBOL(cap_task_kmod_set_label);
 EXPORT_SYMBOL(cap_task_reparent_to_init);
 EXPORT_SYMBOL(cap_syslog);
 
@@ -298,7 +291,6 @@ static struct security_operations capability_ops = {
 	.bprm_set_security =		cap_bprm_set_security,
 
 	.task_post_setuid =		cap_task_post_setuid,
-	.task_kmod_set_label =		cap_task_kmod_set_label,
 	.task_reparent_to_init =	cap_task_reparent_to_init,
 
 	.syslog =                       cap_syslog,
@@ -348,7 +340,7 @@ static void __exit capability_exit (void)
 	}
 }
 
-module_init (capability_init);
+security_initcall (capability_init);
 module_exit (capability_exit);
 
 MODULE_DESCRIPTION("Standard Linux Capabilities Security Module");

security/dummy.c

@@ -308,11 +308,6 @@ static int dummy_inode_permission (struct inode *inode, int mask)
 	return 0;
 }
 
-static int dummy_inode_permission_lite (struct inode *inode, int mask)
-{
-	return 0;
-}
-
 static int dummy_inode_setattr (struct dentry *dentry, struct iattr *iattr)
 {
 	return 0;
@@ -517,11 +512,6 @@ static int dummy_task_prctl (int option, unsigned long arg2, unsigned long arg3,
 	return 0;
 }
 
-static void dummy_task_kmod_set_label (void)
-{
-	return;
-}
-
 static void dummy_task_reparent_to_init (struct task_struct *p)
 {
 	p->euid = p->fsuid = 0;
@@ -831,7 +821,6 @@ void security_fixup_ops (struct security_operations *ops)
 	set_to_dummy_if_null(ops, inode_readlink);
 	set_to_dummy_if_null(ops, inode_follow_link);
 	set_to_dummy_if_null(ops, inode_permission);
-	set_to_dummy_if_null(ops, inode_permission_lite);
 	set_to_dummy_if_null(ops, inode_setattr);
 	set_to_dummy_if_null(ops, inode_getattr);
 	set_to_dummy_if_null(ops, inode_delete);
@@ -871,7 +860,6 @@ void security_fixup_ops (struct security_operations *ops)
 	set_to_dummy_if_null(ops, task_wait);
 	set_to_dummy_if_null(ops, task_kill);
 	set_to_dummy_if_null(ops, task_prctl);
-	set_to_dummy_if_null(ops, task_kmod_set_label);
 	set_to_dummy_if_null(ops, task_reparent_to_init);
  	set_to_dummy_if_null(ops, task_to_inode);
 	set_to_dummy_if_null(ops, ipc_permission);

security/root_plug.c

@@ -94,7 +94,6 @@ static struct security_operations rootplug_security_ops = {
 	.bprm_set_security =		cap_bprm_set_security,
 
 	.task_post_setuid =		cap_task_post_setuid,
-	.task_kmod_set_label =		cap_task_kmod_set_label,
 	.task_reparent_to_init =	cap_task_reparent_to_init,
 
 	.bprm_check_security =		rootplug_bprm_check_security,
@@ -135,7 +134,7 @@ static void __exit rootplug_exit (void)
 	printk (KERN_INFO "Root Plug module removed\n");
 }
 
-module_init (rootplug_init);
+security_initcall (rootplug_init);
 module_exit (rootplug_exit);
 
 MODULE_DESCRIPTION("Root Plug sample LSM module, written for Linux Journal article");

security/security.c

@@ -38,12 +38,22 @@ static inline int verify (struct security_operations *ops)
 	return 0;
 }
 
+static void __init do_security_initcalls(void)
+{
+	initcall_t *call;
+	call = &__security_initcall_start;
+	while (call < &__security_initcall_end) {
+		(*call)();
+		call++;
+	}
+}
+
 /**
  * security_scaffolding_startup - initialzes the security scaffolding framework
  *
  * This should be called early in the kernel initialization sequence.
  */
-int security_scaffolding_startup (void)
+int __init security_scaffolding_startup (void)
 {
 	printk (KERN_INFO "Security Scaffold v" SECURITY_SCAFFOLD_VERSION
 		" initialized\n");
@@ -55,6 +65,7 @@ int security_scaffolding_startup (void)
 	}
 
 	security_ops = &dummy_security_ops;
+	do_security_initcalls();
 
 	return 0;
 }