Merge branch 'heads/soc2' into dt3-base

arch/arm/mach-shmobile/Kconfig

@@ -12,6 +12,7 @@ config ARCH_SHMOBILE_MULTI
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
+	select MIGHT_HAVE_PCI
 	select NO_IOPORT
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
@@ -96,6 +97,7 @@ config ARCH_R8A7790
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
@@ -104,6 +106,7 @@ config ARCH_R8A7791
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
@@ -112,6 +115,7 @@ config ARCH_EMEV2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select USE_OF
 	select AUTO_ZRELADDR
 
@@ -239,6 +243,7 @@ config MACH_KOELSCH
 	bool "Koelsch board"
 	depends on ARCH_R8A7791
 	select USE_OF
+	select MICREL_PHY if SH_ETH
 
 config MACH_KZM9G
 	bool "KZM-A9-GT board"

arch/arm/mach-shmobile/board-bockw.c

@@ -25,6 +25,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>

arch/arm/mach-shmobile/clock-r7s72100.c

@@ -178,7 +178,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
-	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
 };
 
 void __init r7s72100_clock_init(void)

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -292,9 +292,13 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
 	CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP931]),
 	CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP930]),
 	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP929]),
 	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP928]),
 	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),

arch/arm/mach-shmobile/clock-r8a7791.c

@@ -122,6 +122,7 @@ static struct clk *main_clks[] = {
 
 /* MSTP */
 enum {
+	MSTP813,
 	MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
 	MSTP719, MSTP718, MSTP715, MSTP714,
 	MSTP522,
@@ -132,6 +133,7 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
 	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
 	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
 	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
@@ -192,6 +194,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
 };
 
 #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -658,6 +658,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
+	CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
 	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -20,13 +20,30 @@
 #define __ASM_R8A7778_H__
 
 #include <linux/sh_eth.h>
-#include <linux/platform_data/camera-rcar.h>
 
 /* HPB-DMA slave IDs */
 enum {
 	HPBDMA_SLAVE_DUMMY,
 	HPBDMA_SLAVE_SDHI0_TX,
 	HPBDMA_SLAVE_SDHI0_RX,
+	HPBDMA_SLAVE_SSI0_TX,
+	HPBDMA_SLAVE_SSI0_RX,
+	HPBDMA_SLAVE_SSI1_TX,
+	HPBDMA_SLAVE_SSI1_RX,
+	HPBDMA_SLAVE_SSI2_TX,
+	HPBDMA_SLAVE_SSI2_RX,
+	HPBDMA_SLAVE_SSI3_TX,
+	HPBDMA_SLAVE_SSI3_RX,
+	HPBDMA_SLAVE_SSI4_TX,
+	HPBDMA_SLAVE_SSI4_RX,
+	HPBDMA_SLAVE_SSI5_TX,
+	HPBDMA_SLAVE_SSI5_RX,
+	HPBDMA_SLAVE_SSI6_TX,
+	HPBDMA_SLAVE_SSI6_RX,
+	HPBDMA_SLAVE_SSI7_TX,
+	HPBDMA_SLAVE_SSI7_RX,
+	HPBDMA_SLAVE_SSI8_TX,
+	HPBDMA_SLAVE_SSI8_RX,
 	HPBDMA_SLAVE_HPBIF0_TX,
 	HPBDMA_SLAVE_HPBIF0_RX,
 	HPBDMA_SLAVE_HPBIF1_TX,
@@ -45,6 +62,8 @@ enum {
 	HPBDMA_SLAVE_HPBIF7_RX,
 	HPBDMA_SLAVE_HPBIF8_TX,
 	HPBDMA_SLAVE_HPBIF8_RX,
+	HPBDMA_SLAVE_USBFUNC_TX,
+	HPBDMA_SLAVE_USBFUNC_RX,
 };
 
 extern void r8a7778_add_standard_devices(void);

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -319,6 +319,29 @@ void __init r8a7778_add_dt_devices(void)
 #define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
 #define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
 
+#define HPBDMA_SSI(_id)				\
+{						\
+	.id	= HPBDMA_SLAVE_SSI## _id ##_TX,	\
+	.addr	= 0xffd91008 + (_id * 0x40),	\
+	.dcr	= HPB_DMAE_DCR_CT |		\
+		  HPB_DMAE_DCR_DIP |		\
+		  HPB_DMAE_DCR_SPDS_32BIT |	\
+		  HPB_DMAE_DCR_DMDL |		\
+		  HPB_DMAE_DCR_DPDS_32BIT,	\
+	.port   = _id + (_id << 8),		\
+	.dma_ch = (28 + _id),			\
+}, {						\
+	.id	= HPBDMA_SLAVE_SSI## _id ##_RX,	\
+	.addr	= 0xffd9100c + (_id * 0x40),	\
+	.dcr	= HPB_DMAE_DCR_CT |		\
+		  HPB_DMAE_DCR_DIP |		\
+		  HPB_DMAE_DCR_SMDL |		\
+		  HPB_DMAE_DCR_SPDS_32BIT |	\
+		  HPB_DMAE_DCR_DPDS_32BIT,	\
+	.port   = _id + (_id << 8),		\
+	.dma_ch = (28 + _id),			\
+}
+
 #define HPBDMA_HPBIF(_id)				\
 {							\
 	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
@@ -371,8 +394,34 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 		.port	= 0x0D0C,
 		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
 		.dma_ch	= 22,
+	}, {
+		.id	= HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
+		.addr	= 0xffe60018,
+		.dcr	= HPB_DMAE_DCR_SPDS_32BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_32BIT,
+		.port	= 0x0000,
+		.dma_ch	= 14,
+	}, {
+		.id	= HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
+		.addr	= 0xffe6001c,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_32BIT |
+			  HPB_DMAE_DCR_DPDS_32BIT,
+		.port	= 0x0101,
+		.dma_ch	= 15,
 	},
 
+	HPBDMA_SSI(0),
+	HPBDMA_SSI(1),
+	HPBDMA_SSI(2),
+	HPBDMA_SSI(3),
+	HPBDMA_SSI(4),
+	HPBDMA_SSI(5),
+	HPBDMA_SSI(6),
+	HPBDMA_SSI(7),
+	HPBDMA_SSI(8),
+
 	HPBDMA_HPBIF(0),
 	HPBDMA_HPBIF(1),
 	HPBDMA_HPBIF(2),
@@ -385,24 +434,44 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 };
 
 static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
+	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX),   /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX),   /* ch. 28 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX),   /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX),   /* ch. 29 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX),   /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX),   /* ch. 30 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX),   /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX),   /* ch. 31 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX),   /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX),   /* ch. 32 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX),   /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX),   /* ch. 33 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX),   /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX),   /* ch. 34 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX),   /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX),   /* ch. 35 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX),   /* ch. 36 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX),   /* ch. 36 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
 };

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -63,6 +63,27 @@ R8A7790_GPIO(5);
 		&r8a7790_gpio##idx##_platform_data,			\
 		sizeof(r8a7790_gpio##idx##_platform_data))
 
+static struct resource i2c_resources[] __initdata = {
+	/* I2C0 */
+	DEFINE_RES_MEM(0xE6508000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(287)),
+	/* I2C1 */
+	DEFINE_RES_MEM(0xE6518000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(288)),
+	/* I2C2 */
+	DEFINE_RES_MEM(0xE6530000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(286)),
+	/* I2C3 */
+	DEFINE_RES_MEM(0xE6540000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(290)),
+
+};
+
+#define r8a7790_register_i2c(idx)		\
+	platform_device_register_simple(	\
+		"i2c-rcar", idx,		\
+		i2c_resources + (2 * idx), 2);	\
+
 void __init r8a7790_pinmux_init(void)
 {
 	platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
@@ -73,6 +94,10 @@ void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
+	r8a7790_register_i2c(0);
+	r8a7790_register_i2c(1);
+	r8a7790_register_i2c(2);
+	r8a7790_register_i2c(3);
 }
 
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/clk/shmobile.h>
 #include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -44,8 +45,10 @@ u32 __init rcar_gen2_read_mode_pins(void)
 
 void __init rcar_gen2_timer_init(void)
 {
-#ifdef CONFIG_ARM_ARCH_TIMER
+#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
 	u32 mode = rcar_gen2_read_mode_pins();
+#endif
+#ifdef CONFIG_ARM_ARCH_TIMER
 	void __iomem *base;
 	int extal_mhz = 0;
 	u32 freq;
@@ -78,14 +81,28 @@ void __init rcar_gen2_timer_init(void)
 	/* Remap "armgcnt address map" space */
 	base = ioremap(0xe6080000, PAGE_SIZE);
 
+	/*
+	 * Update the timer if it is either not running, or is not at the
+	 * right frequency. The timer is only configurable in secure mode
+	 * so this avoids an abort if the loader started the timer and
+	 * entered the kernel in non-secure mode.
+	 */
+
+	if ((ioread32(base + CNTCR) & 1) == 0 ||
+	    ioread32(base + CNTFID0) != freq) {
 		/* Update registers with correct frequency */
 		iowrite32(freq, base + CNTFID0);
 		asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
 
 		/* make sure arch timer is started by setting bit 0 of CNTCR */
 		iowrite32(1, base + CNTCR);
+	}
+
 	iounmap(base);
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
+#ifdef CONFIG_COMMON_CLK
+	rcar_gen2_clocks_init(mode);
+#endif
 	clocksource_of_init();
 }

include/dt-bindings/clock/r8a7790-clock.h

+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7790_H__
+#define __DT_BINDINGS_CLOCK_R8A7790_H__
+
+/* CPG */
+#define R8A7790_CLK_MAIN		0
+#define R8A7790_CLK_PLL0		1
+#define R8A7790_CLK_PLL1		2
+#define R8A7790_CLK_PLL3		3
+#define R8A7790_CLK_LB			4
+#define R8A7790_CLK_QSPI		5
+#define R8A7790_CLK_SDH			6
+#define R8A7790_CLK_SD0			7
+#define R8A7790_CLK_SD1			8
+#define R8A7790_CLK_Z			9
+
+/* MSTP1 */
+#define R8A7790_CLK_TMU1		11
+#define R8A7790_CLK_TMU3		21
+#define R8A7790_CLK_TMU2		22
+#define R8A7790_CLK_CMT0		24
+#define R8A7790_CLK_TMU0		25
+#define R8A7790_CLK_VSP1_DU1		27
+#define R8A7790_CLK_VSP1_DU0		28
+#define R8A7790_CLK_VSP1_RT		30
+#define R8A7790_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7790_CLK_SCIFA2		2
+#define R8A7790_CLK_SCIFA1		3
+#define R8A7790_CLK_SCIFA0		4
+#define R8A7790_CLK_SCIFB0		6
+#define R8A7790_CLK_SCIFB1		7
+#define R8A7790_CLK_SCIFB2		16
+#define R8A7790_CLK_SYS_DMAC0		18
+#define R8A7790_CLK_SYS_DMAC1		19
+
+/* MSTP3 */
+#define R8A7790_CLK_TPU0		4
+#define R8A7790_CLK_MMCIF1		5
+#define R8A7790_CLK_SDHI3		11
+#define R8A7790_CLK_SDHI2		12
+#define R8A7790_CLK_SDHI1		13
+#define R8A7790_CLK_SDHI0		14
+#define R8A7790_CLK_MMCIF0		15
+#define R8A7790_CLK_SSUSB		28
+#define R8A7790_CLK_CMT1		29
+#define R8A7790_CLK_USBDMAC0		30
+#define R8A7790_CLK_USBDMAC1		31
+
+/* MSTP5 */
+#define R8A7790_CLK_THERMAL		22
+#define R8A7790_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7790_CLK_EHCI		3
+#define R8A7790_CLK_HSUSB		4
+#define R8A7790_CLK_HSCIF1		16
+#define R8A7790_CLK_HSCIF0		17
+#define R8A7790_CLK_SCIF1		20
+#define R8A7790_CLK_SCIF0		21
+#define R8A7790_CLK_DU2			22
+#define R8A7790_CLK_DU1			23
+#define R8A7790_CLK_DU0			24
+#define R8A7790_CLK_LVDS1		25
+#define R8A7790_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7790_CLK_VIN3		8
+#define R8A7790_CLK_VIN2		9
+#define R8A7790_CLK_VIN1		10
+#define R8A7790_CLK_VIN0		11
+#define R8A7790_CLK_ETHER		13
+#define R8A7790_CLK_SATA1		14
+#define R8A7790_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7790_CLK_GPIO5		7
+#define R8A7790_CLK_GPIO4		8
+#define R8A7790_CLK_GPIO3		9
+#define R8A7790_CLK_GPIO2		10
+#define R8A7790_CLK_GPIO1		11
+#define R8A7790_CLK_GPIO0		12
+#define R8A7790_CLK_RCAN1		15
+#define R8A7790_CLK_RCAN0		16
+#define R8A7790_CLK_IICDVFS		26
+#define R8A7790_CLK_I2C3		28
+#define R8A7790_CLK_I2C2		29
+#define R8A7790_CLK_I2C1		30
+#define R8A7790_CLK_I2C0		31
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */

include/dt-bindings/clock/r8a7791-clock.h

+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7791_H__
+#define __DT_BINDINGS_CLOCK_R8A7791_H__
+
+/* CPG */
+#define R8A7791_CLK_MAIN		0
+#define R8A7791_CLK_PLL0		1
+#define R8A7791_CLK_PLL1		2
+#define R8A7791_CLK_PLL3		3
+#define R8A7791_CLK_LB			4
+#define R8A7791_CLK_QSPI		5
+#define R8A7791_CLK_SDH			6
+#define R8A7791_CLK_SD0			7
+#define R8A7791_CLK_Z			8
+
+/* MSTP1 */
+#define R8A7791_CLK_TMU1		11
+#define R8A7791_CLK_TMU3		21
+#define R8A7791_CLK_TMU2		22
+#define R8A7791_CLK_CMT0		24
+#define R8A7791_CLK_TMU0		25
+#define R8A7791_CLK_VSP1_DU1		27
+#define R8A7791_CLK_VSP1_DU0		28
+#define R8A7791_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7791_CLK_SCIFA2		2
+#define R8A7791_CLK_SCIFA1		3
+#define R8A7791_CLK_SCIFA0		4
+#define R8A7791_CLK_SCIFB0		6
+#define R8A7791_CLK_SCIFB1		7
+#define R8A7791_CLK_SCIFB2		16
+#define R8A7791_CLK_DMAC		18
+
+/* MSTP3 */
+#define R8A7791_CLK_TPU0		4
+#define R8A7791_CLK_SDHI2		11
+#define R8A7791_CLK_SDHI1		12
+#define R8A7791_CLK_SDHI0		14
+#define R8A7791_CLK_MMCIF0		15
+#define R8A7791_CLK_SSUSB		28
+#define R8A7791_CLK_CMT1		29
+#define R8A7791_CLK_USBDMAC0		30
+#define R8A7791_CLK_USBDMAC1		31
+
+/* MSTP5 */
+#define R8A7791_CLK_THERMAL		22
+#define R8A7791_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7791_CLK_HSUSB		4
+#define R8A7791_CLK_HSCIF2		13
+#define R8A7791_CLK_SCIF5		14
+#define R8A7791_CLK_SCIF4		15
+#define R8A7791_CLK_HSCIF1		16
+#define R8A7791_CLK_HSCIF0		17
+#define R8A7791_CLK_SCIF3		18
+#define R8A7791_CLK_SCIF2		19
+#define R8A7791_CLK_SCIF1		20
+#define R8A7791_CLK_SCIF0		21
+#define R8A7791_CLK_DU1			23
+#define R8A7791_CLK_DU0			24
+#define R8A7791_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7791_CLK_VIN2		9
+#define R8A7791_CLK_VIN1		10
+#define R8A7791_CLK_VIN0		11
+#define R8A7791_CLK_ETHER		13
+#define R8A7791_CLK_SATA1		14
+#define R8A7791_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7791_CLK_GPIO7		4
+#define R8A7791_CLK_GPIO6		5
+#define R8A7791_CLK_GPIO5		7
+#define R8A7791_CLK_GPIO4		8
+#define R8A7791_CLK_GPIO3		9
+#define R8A7791_CLK_GPIO2		10
+#define R8A7791_CLK_GPIO1		11
+#define R8A7791_CLK_GPIO0		12
+#define R8A7791_CLK_RCAN1		15
+#define R8A7791_CLK_RCAN0		16
+#define R8A7791_CLK_I2C5		25
+#define R8A7791_CLK_IICDVFS		26
+#define R8A7791_CLK_I2C4		27
+#define R8A7791_CLK_I2C3		28
+#define R8A7791_CLK_I2C2		29
+#define R8A7791_CLK_I2C1		30
+#define R8A7791_CLK_I2C0		31
+
+/* MSTP11 */
+#define R8A7791_CLK_SCIFA3		6
+#define R8A7791_CLK_SCIFA4		7
+#define R8A7791_CLK_SCIFA5		8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */