Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/Makefile

@@ -8,7 +8,7 @@
 # Copyright (C) 1995-2001 by Russell King
 
 LDFLAGS_vmlinux	:=-p --no-undefined -X
-CPPFLAGS_vmlinux.lds = -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR)
 OBJCOPYFLAGS	:=-O binary -R .note -R .comment -S
 GZFLAGS		:=-9
 #CFLAGS		+=-pipe
@@ -108,27 +108,19 @@ export CFLAGS_3c589_cs.o
 endif
 
 TEXTADDR := $(textaddr-y)
-ifeq ($(CONFIG_XIP_KERNEL),y)
-  DATAADDR := $(TEXTADDR)
-  xipaddr-$(CONFIG_ARCH_CO285) := 0x5f000000
-  xipaddr-y ?= 0xbf000000
-  # Replace phys addr with virt addr while keeping offset from base.
-  TEXTADDR := $(shell echo $(CONFIG_XIP_PHYS_ADDR) $(xipaddr-y) | \
-                      awk --non-decimal-data '/[:xdigit:]/ \
-                          { printf("0x%x\n", and($$1, 0x000fffff) + $$2) }' )
-endif
 
 ifeq ($(incdir-y),)
 incdir-y := $(machine-y)
 endif
 INCDIR   := arch-$(incdir-y)
+
 ifneq ($(machine-y),)
 MACHINE  := arch/arm/mach-$(machine-y)/
 else
 MACHINE  :=
 endif
   
-export	TEXTADDR DATAADDR GZFLAGS
+export	TEXTADDR GZFLAGS
 
 # Do we have FASTFPE?
 FASTFPE		:=arch/arm/fastfpe

arch/arm/kernel/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
+AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR)
 
 # Object file lists.
 

arch/arm/kernel/asm-offsets.c

@@ -94,7 +94,6 @@ int main(void)
   DEFINE(VM_EXEC,	       	VM_EXEC);
   BLANK();
   DEFINE(PAGE_SZ,	       	PAGE_SIZE);
-  DEFINE(VIRT_OFFSET,		PAGE_OFFSET);
   BLANK();
   DEFINE(SYS_ERROR0,		0x9f0000);
   BLANK();

arch/arm/kernel/entry-armv.S

@@ -15,6 +15,7 @@
  */
 #include <linux/config.h>
 
+#include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
 #include <asm/hardware.h>		/* should be moved into entry-macro.S */
@@ -310,7 +311,7 @@ __pabt_svc:
 
 #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 	@ make sure our user space atomic helper is aborted
-	cmp	r2, #VIRT_OFFSET
+	cmp	r2, #TASK_SIZE
 	bichs	r3, r3, #PSR_Z_BIT
 #endif
 

arch/arm/kernel/head.S

@@ -21,6 +21,7 @@
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
+#include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
@@ -33,52 +34,28 @@
 #define MACHINFO_PGOFFIO	12
 #define MACHINFO_NAME		16
 
-#ifndef CONFIG_XIP_KERNEL
 /*
- * We place the page tables 16K below TEXTADDR.  Therefore, we must make sure
- * that TEXTADDR is correctly set.  Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * TEXTADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that swapper_pg_dir is the virtual address of the page tables, and
- * pgtbl gives us a position-independent reference to these tables.  We can
- * do this because stext == TEXTADDR
+ * swapper_pg_dir is the virtual address of the initial page table.
+ * We place the page tables 16K below KERNEL_RAM_ADDR.  Therefore, we must
+ * make sure that KERNEL_RAM_ADDR is correctly set.  Currently, we expect
+ * the least significant 16 bits to be 0x8000, but we could probably
+ * relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000.
  */
-#if (TEXTADDR & 0xffff) != 0x8000
-#error TEXTADDR must start at 0xXXXX8000
+#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000
+#error KERNEL_RAM_ADDR must start at 0xXXXX8000
 #endif
 
 	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, TEXTADDR - 0x4000
+	.equ	swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000
 
-	.macro	pgtbl, rd, phys
-	adr	\rd, stext
-	sub	\rd, \rd, #0x4000
+	.macro	pgtbl, rd
+	ldr	\rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000))
 	.endm
-#else
-/*
- * XIP Kernel:
- *
- * We place the page tables 16K below DATAADDR.  Therefore, we must make sure
- * that DATAADDR is correctly set.  Currently, we expect the least significant
- * 16 bits to be 0x8000, but we could probably relax this restriction to
- * DATAADDR >= PAGE_OFFSET + 0x4000
- *
- * Note that pgtbl is meant to return the physical address of swapper_pg_dir.
- * We can't make it relative to the kernel position in this case since
- * the kernel can physically be anywhere.
- */
-#if (DATAADDR & 0xffff) != 0x8000
-#error DATAADDR must start at 0xXXXX8000
-#endif
-
-	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, DATAADDR - 0x4000
 
-	.macro	pgtbl, rd, phys
-	ldr	\rd, =((DATAADDR - 0x4000) - VIRT_OFFSET)
-	add	\rd, \rd, \phys
-	.endm
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
+#define TEXTADDR  KERNEL_RAM_ADDR
 #endif
 
 /*
@@ -279,7 +256,7 @@ __turn_mmu_on:
 	.type	__create_page_tables, %function
 __create_page_tables:
 	ldr	r5, [r8, #MACHINFO_PHYSRAM]	@ physram
-	pgtbl	r4, r5				@ page table address
+	pgtbl	r4				@ page table address
 
 	/*
 	 * Clear the 16K level 1 swapper page table
@@ -324,7 +301,7 @@ __create_page_tables:
 	/*
 	 * Then map first 1MB of ram in case it contains our boot params.
 	 */
-	add	r0, r4, #VIRT_OFFSET >> 18
+	add	r0, r4, #PAGE_OFFSET >> 18
 	orr	r6, r5, r7
 	str	r6, [r0]
 

arch/arm/kernel/vmlinux.lds.S

@@ -6,14 +6,23 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <linux/config.h>
 #include <asm/thread_info.h>
+#include <asm/memory.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
+
 #ifndef __ARMEB__
 jiffies = jiffies_64;
 #else
 jiffies = jiffies_64 + 4;
 #endif
+
+#ifdef CONFIG_XIP_KERNEL
+#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
+#define TEXTADDR  KERNEL_RAM_ADDR
+#endif
+
 SECTIONS
 {
 	. = TEXTADDR;
@@ -95,7 +104,7 @@ SECTIONS
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
-	. = DATAADDR;
+	. = KERNEL_RAM_ADDR;
 #else
 	. = ALIGN(THREAD_SIZE);
 	__data_loc = .;

arch/arm/mach-sa1100/generic.c

@@ -23,6 +23,7 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <asm/mach/flash.h>
 #include <asm/irq.h>
 
 #include "generic.h"
@@ -283,6 +284,7 @@ static struct platform_device sa11x0mtd_device = {
 void sa11x0_set_flash_data(struct flash_platform_data *flash,
 			   struct resource *res, int nr)
 {
+	flash->name = "sa1100";
 	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;

arch/arm/mach-sa1100/jornada720.c

@@ -8,6 +8,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/hardware.h>
 #include <asm/hardware/sa1111.h>
@@ -16,6 +18,7 @@
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
@@ -108,6 +111,66 @@ static void __init jornada720_map_io(void)
 	sa1100_register_uart(1, 1);
 }
 
+static struct mtd_partition jornada720_partitions[] = {
+	{
+		.name		= "JORNADA720 boot firmware",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "JORNADA720 kernel",
+		.size		= 0x000c0000,
+		.offset		= 0x00040000,
+	}, {
+		.name		= "JORNADA720 params",
+		.size		= 0x00040000,
+		.offset		= 0x00100000,
+	}, {
+		.name		= "JORNADA720 initrd",
+		.size		= 0x00100000,
+		.offset		= 0x00140000,
+	}, {
+		.name		= "JORNADA720 root cramfs",
+		.size		= 0x00300000,
+		.offset		= 0x00240000,
+	}, {
+		.name		= "JORNADA720 usr cramfs",
+		.size		= 0x00800000,
+		.offset		= 0x00540000,
+	}, {
+		.name		= "JORNADA720 usr local",
+		.size		= 0,  /* will expand to the end of the flash */
+		.offset		= 0x00d00000,
+	}
+};
+
+static void jornada720_set_vpp(int vpp)
+{
+	if (vpp)
+		PPSR |= 0x80;
+	else
+		PPSR &= ~0x80;
+	PPDR |= 0x80;
+}
+
+static struct flash_platform_data jornada720_flash_data = {
+	.map_name	= "cfi_probe",
+	.set_vpp	= jornada720_set_vpp,
+	.parts		= jornada720_partitions,
+	.nr_parts	= ARRAY_SIZE(jornada720_partitions),
+};
+
+static struct resource jornada720_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static void __init jornada720_mach_init(void)
+{
+	sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+}
+
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Michael Gernoth <michael@gernoth.net> */
 	.phys_ram	= 0xc0000000,
@@ -117,4 +180,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 	.map_io		= jornada720_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
+	.init_machine	= jornada720_mach_init,
 MACHINE_END

arch/arm/mm/init.c

@@ -363,20 +363,16 @@ static void __init bootmem_init(struct meminfo *mi)
 
 	memcpy(&meminfo, mi, sizeof(meminfo));
 
-#ifdef CONFIG_XIP_KERNEL
-#error needs fixing
-	p->pfn        = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PMD_MASK);
-	p->virtual    = (unsigned long)&_stext & PMD_MASK;
-	p->length     = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
-	p->type       = MT_ROM;
-	p ++;
-#endif
-
 	/*
 	 * Clear out all the mappings below the kernel image.
-	 * FIXME: what about XIP?
 	 */
-	for (addr = 0; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+	for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+#ifdef CONFIG_XIP_KERNEL
+	/* The XIP kernel is mapped in the module area -- skip over it */
+	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+#endif
+	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
 	/*
@@ -435,6 +431,18 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
+	/*
+	 * Map the kernel if it is XIP.
+	 * It is always first in the modulearea.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK);
+	map.virtual = MODULE_START;
+	map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK;
+	map.type = MT_ROM;
+	create_mapping(&map);
+#endif
+
 	/*
 	 * Map the cache flushing regions.
 	 */

drivers/mtd/maps/sa1100-flash.c

@@ -130,20 +130,21 @@ struct sa_subdev_info {
 	char name[16];
 	struct map_info map;
 	struct mtd_info *mtd;
-	struct flash_platform_data *data;
+	struct flash_platform_data *plat;
 };
 
 struct sa_info {
 	struct mtd_partition	*parts;
 	struct mtd_info		*mtd;
 	int			num_subdev;
+	unsigned int		nr_parts;
 	struct sa_subdev_info	subdev[0];
 };
 
 static void sa1100_set_vpp(struct map_info *map, int on)
 {
 	struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map);
-	subdev->data->set_vpp(on);
+	subdev->plat->set_vpp(on);
 }
 
 static void sa1100_destroy_subdev(struct sa_subdev_info *subdev)
@@ -187,7 +188,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r
 		goto out;
 	}
 
-	if (subdev->data->set_vpp)
+	if (subdev->plat->set_vpp)
 		subdev->map.set_vpp = sa1100_set_vpp;
 
 	subdev->map.phys = phys;
@@ -204,7 +205,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r
 	 * Now let's probe for the actual flash.  Do it here since
 	 * specific machine settings might have been set above.
 	 */
-	subdev->mtd = do_map_probe(subdev->data->map_name, &subdev->map);
+	subdev->mtd = do_map_probe(subdev->plat->map_name, &subdev->map);
 	if (subdev->mtd == NULL) {
 		ret = -ENXIO;
 		goto err;
@@ -223,13 +224,17 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r
 	return ret;
 }
 
-static void sa1100_destroy(struct sa_info *info)
+static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *plat)
 {
 	int i;
 
 	if (info->mtd) {
+		if (info->nr_parts == 0)
+			del_mtd_device(info->mtd);
+#ifdef CONFIG_MTD_PARTITIONS
+		else
 			del_mtd_partitions(info->mtd);
-
+#endif
 #ifdef CONFIG_MTD_CONCAT
 		if (info->mtd != info->subdev[0].mtd)
 			mtd_concat_destroy(info->mtd);
@@ -242,10 +247,13 @@ static void sa1100_destroy(struct sa_info *info)
 	for (i = info->num_subdev - 1; i >= 0; i--)
 		sa1100_destroy_subdev(&info->subdev[i]);
 	kfree(info);
+
+	if (plat->exit)
+		plat->exit();
 }
 
 static struct sa_info *__init
-sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash)
+sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
 {
 	struct sa_info *info;
 	int nr, size, i, ret = 0;
@@ -275,6 +283,12 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash
 
 	memset(info, 0, size);
 
+	if (plat->init) {
+		ret = plat->init();
+		if (ret)
+			goto err;
+	}
+
 	/*
 	 * Claim and then map the memory regions.
 	 */
@@ -287,8 +301,8 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash
 			break;
 
 		subdev->map.name = subdev->name;
-		sprintf(subdev->name, "sa1100-%d", i);
-		subdev->data = flash;
+		sprintf(subdev->name, "%s-%d", plat->name, i);
+		subdev->plat = plat;
 
 		ret = sa1100_probe_subdev(subdev, res);
 		if (ret)
@@ -309,7 +323,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash
 	 * otherwise fail.  Either way, it'll be called "sa1100".
 	 */
 	if (info->num_subdev == 1) {
-		strcpy(info->subdev[0].name, "sa1100");
+		strcpy(info->subdev[0].name, plat->name);
 		info->mtd = info->subdev[0].mtd;
 		ret = 0;
 	} else if (info->num_subdev > 1) {
@@ -322,7 +336,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash
 			cdev[i] = info->subdev[i].mtd;
 
 		info->mtd = mtd_concat_create(cdev, info->num_subdev,
-					      "sa1100");
+					      plat->name);
 		if (info->mtd == NULL)
 			ret = -ENXIO;
 #else
@@ -336,7 +350,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash
 		return info;
 
  err:
-	sa1100_destroy(info);
+	sa1100_destroy(info, plat);
  out:
 	return ERR_PTR(ret);
 }
@@ -346,16 +360,16 @@ static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 static int __init sa1100_mtd_probe(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	struct flash_platform_data *flash = pdev->dev.platform_data;
+	struct flash_platform_data *plat = pdev->dev.platform_data;
 	struct mtd_partition *parts;
 	const char *part_type = NULL;
 	struct sa_info *info;
 	int err, nr_parts = 0;
 
-	if (!flash)
+	if (!plat)
 		return -ENODEV;
 
-	info = sa1100_setup_mtd(pdev, flash);
+	info = sa1100_setup_mtd(pdev, plat);
 	if (IS_ERR(info)) {
 		err = PTR_ERR(info);
 		goto out;
@@ -372,8 +386,8 @@ static int __init sa1100_mtd_probe(struct device *dev)
 	} else
 #endif
 	{
-		parts = flash->parts;
-		nr_parts = flash->nr_parts;
+		parts = plat->parts;
+		nr_parts = plat->nr_parts;
 		part_type = "static";
 	}
 
@@ -387,6 +401,8 @@ static int __init sa1100_mtd_probe(struct device *dev)
 		add_mtd_partitions(info->mtd, parts, nr_parts);
 	}
 
+	info->nr_parts = nr_parts;
+
 	dev_set_drvdata(dev, info);
 	err = 0;
 
@@ -397,8 +413,11 @@ static int __init sa1100_mtd_probe(struct device *dev)
 static int __exit sa1100_mtd_remove(struct device *dev)
 {
 	struct sa_info *info = dev_get_drvdata(dev);
+	struct flash_platform_data *plat = dev->platform_data;
+
 	dev_set_drvdata(dev, NULL);
-	sa1100_destroy(info);
+	sa1100_destroy(info, plat);
+
 	return 0;
 }
 
@@ -421,9 +440,17 @@ static int sa1100_mtd_resume(struct device *dev)
 		info->mtd->resume(info->mtd);
 	return 0;
 }
+
+static void sa1100_mtd_shutdown(struct device *dev)
+{
+	struct sa_info *info = dev_get_drvdata(dev);
+	if (info && info->mtd->suspend(info->mtd) == 0)
+		info->mtd->resume(info->mtd);
+}
 #else
 #define sa1100_mtd_suspend NULL
 #define sa1100_mtd_resume  NULL
+#define sa1100_mtd_shutdown NULL
 #endif
 
 static struct device_driver sa1100_mtd_driver = {
@@ -433,6 +460,7 @@ static struct device_driver sa1100_mtd_driver = {
 	.remove		= __exit_p(sa1100_mtd_remove),
 	.suspend	= sa1100_mtd_suspend,
 	.resume		= sa1100_mtd_resume,
+	.shutdown	= sa1100_mtd_shutdown,
 };
 
 static int __init sa1100_mtd_init(void)

include/asm-arm/arch-aaec2000/memory.h

@@ -13,7 +13,7 @@
 
 #include <linux/config.h>
 
-#define PHYS_OFFSET	(0xf0000000UL)
+#define PHYS_OFFSET	UL(0xf0000000)
 
 #define __virt_to_bus(x)	__virt_to_phys(x)
 #define __bus_to_virt(x)	__phys_to_virt(x)

include/asm-arm/arch-cl7500/memory.h

@@ -17,7 +17,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0x10000000UL)
+#define PHYS_OFFSET	UL(0x10000000)
 
 /*
  * These are exactly the same on the RiscPC as the

include/asm-arm/arch-clps711x/memory.h

@@ -25,7 +25,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0xc0000000UL)
+#define PHYS_OFFSET	UL(0xc0000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-ebsa110/memory.h

@@ -19,7 +19,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0x00000000UL)
+#define PHYS_OFFSET	UL(0x00000000)
 
 /*
  * We keep this 1:1 so that we don't interfere

include/asm-arm/arch-ebsa285/memory.h

@@ -46,14 +46,14 @@ extern unsigned long __bus_to_virt(unsigned long);
 #if defined(CONFIG_ARCH_FOOTBRIDGE)
 
 /* Task size and page offset at 3GB */
-#define TASK_SIZE		(0xbf000000UL)
-#define PAGE_OFFSET		(0xc0000000UL)
+#define TASK_SIZE		UL(0xbf000000)
+#define PAGE_OFFSET		UL(0xc0000000)
 
 #elif defined(CONFIG_ARCH_CO285)
 
 /* Task size and page offset at 1.5GB */
-#define TASK_SIZE		(0x5f000000UL)
-#define PAGE_OFFSET		(0x60000000UL)
+#define TASK_SIZE		UL(0x5f000000)
+#define PAGE_OFFSET		UL(0x60000000)
 
 #else
 
@@ -64,7 +64,7 @@ extern unsigned long __bus_to_virt(unsigned long);
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET		(0x00000000UL)
+#define PHYS_OFFSET		UL(0x00000000)
 
 /*
  * This decides where the kernel will search for a free chunk of vm

include/asm-arm/arch-epxa10db/memory.h

@@ -23,7 +23,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0x00000000UL)
+#define PHYS_OFFSET	UL(0x00000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-h720x/memory.h

@@ -11,7 +11,7 @@
  * Page offset:
  *    ( 0xc0000000UL )
  */
-#define PHYS_OFFSET	(0x40000000UL)
+#define PHYS_OFFSET	UL(0x40000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-imx/memory.h

@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_MMU_H
 #define __ASM_ARCH_MMU_H
 
-#define PHYS_OFFSET	(0x08000000UL)
+#define PHYS_OFFSET	UL(0x08000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-integrator/memory.h

@@ -23,8 +23,8 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0x00000000UL)
-#define BUS_OFFSET	(0x80000000UL)
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x80000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-iop3xx/memory.h

@@ -12,9 +12,9 @@
  * Physical DRAM offset.
  */
 #ifndef CONFIG_ARCH_IOP331
-#define PHYS_OFFSET	(0xa0000000UL)
+#define PHYS_OFFSET	UL(0xa0000000)
 #else
-#define PHYS_OFFSET	(0x00000000UL)
+#define PHYS_OFFSET	UL(0x00000000)
 #endif
 
 /*

include/asm-arm/arch-ixp2000/memory.h

@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#define PHYS_OFFSET	(0x00000000UL)
+#define PHYS_OFFSET	UL(0x00000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-ixp2000/platform.h

@@ -15,40 +15,40 @@
 
 #ifndef __ASSEMBLY__
 
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
 /*
- * The IXP2400 B0 silicon contains an erratum (#66) that causes writes
- * to on-chip I/O register to not complete fully. What this means is
- * that if you have a write to on-chip I/O followed by a back-to-back
- * read or write, the first write will happen twice. OR...if it's
- * not a back-to-back transaction, the read or write will generate
- * incorrect data.
- *
- * The official work around for this is to set the on-chip I/O regions
- * as XCB=101 and then force a read-back from the register.
+ * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
+ * XCB=101 instead, but that makes all I/O accesses bufferable.  This
+ * is not a problem in general, but we do have to be slightly more
+ * careful because I/O writes are no longer automatically flushed out
+ * of the write buffer.
  *
+ * In cases where we want to make sure that a write has been flushed
+ * out of the write buffer before we proceed, for example when masking
+ * a device interrupt before re-enabling IRQs in CPSR, we can use this
+ * function, ixp2000_reg_wrb, which performs a write, a readback, and
+ * issues a dummy instruction dependent on the value of the readback
+ * (mov rX, rX) to make sure that the readback has completed before we
+ * continue.
  */
-#if defined(CONFIG_ARCH_ENP2611) || defined(CONFIG_ARCH_IXDP2400) || defined(CONFIG_ARCH_IXDP2401)
-
-#include <asm/system.h>		/* Pickup local_irq_ functions */
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
 {
 	unsigned long dummy;
-	unsigned long flags;
 
-	local_irq_save(flags);
 	*((volatile unsigned long *)reg) = val;
-	barrier();
+
 	dummy = *((volatile unsigned long *)reg);
-	local_irq_restore(flags);
-}
-#else
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
+	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
 }
-#endif	/* IXDP2400 || IXDP2401 */
-#define ixp2000_reg_read(reg)	(*((volatile unsigned long *)reg))
 
 /*
  * Boards may multiplex different devices on the 2nd channel of 

include/asm-arm/arch-ixp4xx/ixp4xx-regs.h

@@ -36,11 +36,11 @@
  *
  * 0x6000000	0x00004000	ioremap'd	QMgr
  *
- * 0xC0000000	0x00001000	0xffbfe000	PCI CFG 
+ * 0xC0000000	0x00001000	0xffbff000	PCI CFG
  *
- * 0xC4000000	0x00001000	0xffbfd000	EXP CFG 
+ * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
  *
- * 0xC8000000	0x0000C000	0xffbf2000	On-Chip Peripherals
+ * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
  */
 
 /*
@@ -52,22 +52,22 @@
  * Expansion BUS Configuration registers
  */
 #define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFD000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
 #define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
 
 /*
  * PCI Config registers
  */
 #define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFE000)
+#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
 #define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
 
 /*
  * Peripheral space
  */
 #define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBF2000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x0000C000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
 
 /*
  * Debug UART
@@ -121,9 +121,21 @@
 #define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
 #define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
 #define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_EthA_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthB_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
 #define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
+#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
+#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
+#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
+#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
+#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
+
 
 #define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
 #define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
@@ -131,9 +143,20 @@
 #define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
 #define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
 #define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_EthA_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthB_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
 #define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
+#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
+#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
+#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
+#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
+#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
 
 /*
  * Constants to make it easy to access  Interrupt Controller registers

include/asm-arm/arch-ixp4xx/memory.h

@@ -12,7 +12,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0x00000000UL)
+#define PHYS_OFFSET	UL(0x00000000)
 
 #ifndef __ASSEMBLY__
 

include/asm-arm/arch-l7200/memory.h

@@ -15,7 +15,7 @@
 /*
  * Physical DRAM offset on the L7200 SDB.
  */
-#define PHYS_OFFSET     (0xf0000000UL)
+#define PHYS_OFFSET     UL(0xf0000000)
 
 #define __virt_to_bus(x) __virt_to_phys(x)
 #define __bus_to_virt(x) __phys_to_virt(x)

include/asm-arm/arch-lh7a40x/memory.h

@@ -17,7 +17,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0xc0000000UL)
+#define PHYS_OFFSET	UL(0xc0000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-omap/memory.h

@@ -37,9 +37,9 @@
  * Physical DRAM offset.
  */
 #if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET		(0x10000000UL)
+#define PHYS_OFFSET		UL(0x10000000)
 #elif defined(CONFIG_ARCH_OMAP2)
-#define PHYS_OFFSET		(0x80000000UL)
+#define PHYS_OFFSET		UL(0x80000000)
 #endif
 
 /*
@@ -66,7 +66,7 @@
 /*
  * OMAP-1510 Local Bus address offset
  */
-#define OMAP1510_LB_OFFSET	(0x30000000UL)
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
 
 #define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
 #define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)

include/asm-arm/arch-pxa/memory.h

@@ -15,7 +15,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0xa0000000UL)
+#define PHYS_OFFSET	UL(0xa0000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/arch-rpc/memory.h

@@ -21,7 +21,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0x10000000UL)
+#define PHYS_OFFSET	UL(0x10000000)
 
 /*
  * These are exactly the same on the RiscPC as the

include/asm-arm/arch-s3c2410/memory.h

@@ -28,9 +28,9 @@
  * and at 0x0C000000 for S3C2400
  */
 #ifdef CONFIG_CPU_S3C2400
-#define PHYS_OFFSET	(0x0C000000UL)
+#define PHYS_OFFSET	UL(0x0C000000)
 #else
-#define PHYS_OFFSET	(0x30000000UL)
+#define PHYS_OFFSET	UL(0x30000000)
 #endif
 
 /*

include/asm-arm/arch-sa1100/memory.h

@@ -13,7 +13,7 @@
 /*
  * Physical DRAM offset is 0xc0000000 on the SA1100
  */
-#define PHYS_OFFSET	(0xc0000000UL)
+#define PHYS_OFFSET	UL(0xc0000000)
 
 #ifndef __ASSEMBLY__
 

include/asm-arm/arch-shark/memory.h

@@ -15,7 +15,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET     (0x08000000UL)
+#define PHYS_OFFSET     UL(0x08000000)
 
 #ifndef __ASSEMBLY__
 

include/asm-arm/arch-versatile/memory.h

@@ -23,7 +23,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0x00000000UL)
+#define PHYS_OFFSET	UL(0x00000000)
 
 /*
  * Virtual view <-> DMA view memory address translations

include/asm-arm/mach/arch.h

@@ -50,6 +50,7 @@ struct machine_desc {
  */
 #define MACHINE_START(_type,_name)			\
 static const struct machine_desc __mach_desc_##_type	\
+ __attribute_used__					\
  __attribute__((__section__(".arch.info.init"))) = {	\
 	.nr		= MACH_TYPE_##_type,		\
 	.name		= _name,

include/asm-arm/mach/flash.h

@@ -14,6 +14,7 @@ struct mtd_partition;
 
 /*
  * map_name:	the map probe function name
+ * name:	flash device name (eg, as used with mtdparts=)
  * width:	width of mapped device
  * init:	method called at driver/device initialisation
  * exit:	method called at driver/device removal
@@ -23,6 +24,7 @@ struct mtd_partition;
  */
 struct flash_platform_data {
 	const char	*map_name;
+	const char	*name;
 	unsigned int	width;
 	int		(*init)(void);
 	void		(*exit)(void);

include/asm-arm/mach/map.h

@@ -27,8 +27,8 @@ struct meminfo;
 #define MT_ROM			6
 #define MT_IXP2000_DEVICE	7
 
-#define	__phys_to_pfn(paddr)	(paddr >> PAGE_SHIFT)
-#define	__pfn_to_phys(pfn)	(pfn << PAGE_SHIFT)
+#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
+#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
 
 extern void create_memmap_holes(struct meminfo *);
 extern void memtable_init(struct meminfo *);

include/asm-arm/memory.h

@@ -12,6 +12,16 @@
 #ifndef __ASM_ARM_MEMORY_H
 #define __ASM_ARM_MEMORY_H
 
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#ifndef __ASSEMBLY__
+#define UL(x) (x##UL)
+#else
+#define UL(x) (x)
+#endif
+
 #include <linux/config.h>
 #include <linux/compiler.h>
 #include <asm/arch/memory.h>
@@ -21,20 +31,20 @@
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
-#define TASK_SIZE		(0xbf000000UL)
-#define TASK_UNMAPPED_BASE	(0x40000000UL)
+#define TASK_SIZE		UL(0xbf000000)
+#define TASK_UNMAPPED_BASE	UL(0x40000000)
 #endif
 
 /*
  * The maximum size of a 26-bit user space task.
  */
-#define TASK_SIZE_26		(0x04000000UL)
+#define TASK_SIZE_26		UL(0x04000000)
 
 /*
  * Page offset: 3GB
  */
 #ifndef PAGE_OFFSET
-#define PAGE_OFFSET		(0xc0000000UL)
+#define PAGE_OFFSET		UL(0xc0000000)
 #endif
 
 /*
@@ -58,6 +68,13 @@
 #error Top of user space clashes with start of module space
 #endif
 
+/*
+ * The XIP kernel gets mapped at the bottom of the module vm area.
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
+
 #ifndef __ASSEMBLY__
 
 /*