Commit be7ff1af authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

bnx2: Remove config access to non-standard registers

In KVM passthrough mode, the driver may not have config access to
non-standard registers.  The BNX2_PCICFG_MISC_CONFIG config register
access to setup mailbox swapping can be done using MMIO.

Update version to 2.0.20.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a5dac108
......@@ -56,8 +56,8 @@
#include "bnx2_fw.h"
#define DRV_MODULE_NAME "bnx2"
#define DRV_MODULE_VERSION "2.0.18"
#define DRV_MODULE_RELDATE "Oct 7, 2010"
#define DRV_MODULE_VERSION "2.0.20"
#define DRV_MODULE_RELDATE "Nov 24, 2010"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-6.0.15.fw"
#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-6.0.15.fw"
#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-6.0.17.fw"
......@@ -4683,7 +4683,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
val = BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, val);
REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val);
} else {
val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
......@@ -7924,16 +7924,16 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
goto err_out_release;
}
bnx2_set_power_state(bp, PCI_D0);
/* Configure byte swap and enable write to the reg_window registers.
* Rely on CPU to do target byte swapping on big endian systems
* The chip's target access swapping will not swap all accesses
*/
pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG,
REG_WR(bp, BNX2_PCICFG_MISC_CONFIG,
BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
bnx2_set_power_state(bp, PCI_D0);
bp->chip_id = REG_RD(bp, BNX2_MISC_ID);
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment