Commit bee008b7 authored by Wey-Yi Guy's avatar Wey-Yi Guy Committed by John W. Linville

iwlwifi: add bt full concurrency support

Adding the bluetooth full concurrency support for WiFi/BT combo devices.

Driver should configure uCode to operate in "full concurrency" mode (via
LUT) if both conditions are met:
 - Antenna Coupling is more than 35dB
 - WiFi Channel Inhibition Request is hornored by BT Core

Currently, there is no antenna coupling information provided by uCode;
use module parameter to specified the antenna coupling in dB.

When in "full concurrency" mode, driver need to download different LUT
to uCode while sending bt configuration command; also, driver need to
configure the device operate in 1x1 while in full concurrency mode.
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent bd6e2d57
......@@ -201,6 +201,21 @@ static const __le32 iwl6000g2b_def_3w_lookup[12] = {
cpu_to_le32(0xf0004000),
};
static const __le32 iwl6000g2b_concurrent_lookup[12] = {
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0xaaaaaaaa),
cpu_to_le32(0x00000000),
cpu_to_le32(0x00000000),
cpu_to_le32(0x00000000),
cpu_to_le32(0x00000000),
};
static void iwl6000g2b_send_bt_config(struct iwl_priv *priv)
{
struct iwl6000g2b_bt_cmd bt_cmd = {
......@@ -233,11 +248,17 @@ static void iwl6000g2b_send_bt_config(struct iwl_priv *priv)
bt_cmd.valid |= IWL6000G2B_BT_ALL_VALID_MSK;
}
if (priv->bt_full_concurrent)
memcpy(bt_cmd.bt3_lookup_table, iwl6000g2b_concurrent_lookup,
sizeof(iwl6000g2b_concurrent_lookup));
else
memcpy(bt_cmd.bt3_lookup_table, iwl6000g2b_def_3w_lookup,
sizeof(iwl6000g2b_def_3w_lookup));
IWL_DEBUG_INFO(priv, "BT coex %s\n",
bt_cmd.flags ? "active" : "disabled");
IWL_DEBUG_INFO(priv, "BT coex %s in %s mode\n",
bt_cmd.flags ? "active" : "disabled",
priv->bt_full_concurrent ?
"full concurrency" : "3-wire");
if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
IWL_ERR(priv, "failed to send BT Coex Config\n");
......@@ -435,6 +456,7 @@ static void iwl6000g2b_bt_traffic_change_work(struct work_struct *work)
static void iwl6000g2b_bt_coex_profile_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
unsigned long flags;
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
struct iwl6000g2b_bt_sco_cmd sco_cmd = { .flags = 0 };
......@@ -466,6 +488,10 @@ static void iwl6000g2b_bt_coex_profile_notif(struct iwl_priv *priv,
iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
sizeof(sco_cmd), &sco_cmd, NULL);
}
spin_lock_irqsave(&priv->lock, flags);
priv->bt_ci_compliance = coex->bt_ci_compliance;
spin_unlock_irqrestore(&priv->lock, flags);
}
void iwl6000g2b_rx_handler_setup(struct iwl_priv *priv)
......
......@@ -914,6 +914,10 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
* To be safe, simply mask out any chains that we know
* are not on the device.
*/
if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
/* operated as 1x1 in full concurrency mode */
active_chains &= first_antenna(priv->hw_params.valid_rx_ant);
} else
active_chains &= priv->hw_params.valid_rx_ant;
num_tx_chains = 0;
......
......@@ -1333,6 +1333,12 @@ void iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
if (priv->cfg->scan_tx_antennas[band])
scan_tx_antennas = priv->cfg->scan_tx_antennas[band];
if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
/* operated as 1x1 in full concurrency mode */
scan_tx_antennas =
first_antenna(priv->cfg->scan_tx_antennas[band]);
}
priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band],
scan_tx_antennas);
rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
......@@ -1351,6 +1357,11 @@ void iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
rx_ant = first_antenna(active_chains);
}
if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
/* operated as 1x1 in full concurrency mode */
rx_ant = first_antenna(rx_ant);
}
/* MIMO is not used here, but value is required */
rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
......
......@@ -758,6 +758,32 @@ static bool table_type_matches(struct iwl_scale_tbl_info *a,
(a->is_SGI == b->is_SGI);
}
static void rs_bt_update_lq(struct iwl_priv *priv,
struct iwl_lq_sta *lq_sta)
{
struct iwl_scale_tbl_info *tbl;
bool full_concurrent;
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
if (priv->bt_ci_compliance && priv->bt_ant_couple_ok)
full_concurrent = true;
else
full_concurrent = false;
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->bt_full_concurrent != full_concurrent) {
priv->bt_full_concurrent = full_concurrent;
/* Update uCode's rate table. */
tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC, false);
queue_work(priv->workqueue, &priv->bt_full_concurrency);
}
}
/*
* mac80211 sends us Tx status
*/
......@@ -940,6 +966,10 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
/* See if there's a better rate or modulation mode to try. */
if (sta && sta->supp_rates[sband->band])
rs_rate_scale_perform(priv, skb, sta, lq_sta);
/* Is there a need to switch between full concurrency and 3-wire? */
if (priv->bt_ant_couple_ok)
rs_bt_update_lq(priv, lq_sta);
}
/*
......@@ -1325,6 +1355,15 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
tbl->action > IWL_LEGACY_SWITCH_SISO)
tbl->action = IWL_LEGACY_SWITCH_SISO;
/* configure as 1x1 if bt full concurrency */
if (priv->bt_full_concurrent) {
if (!iwl_ht_enabled(priv))
tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
tbl->action = IWL_LEGACY_SWITCH_SISO;
}
start_action = tbl->action;
for (; ;) {
lq_sta->action_counter++;
......@@ -1484,6 +1523,12 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
/* stay in SISO */
tbl->action = IWL_SISO_SWITCH_ANTENNA1;
}
/* configure as 1x1 if bt full concurrency */
if (priv->bt_full_concurrent &&
tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
tbl->action = IWL_SISO_SWITCH_ANTENNA1;
start_action = tbl->action;
for (;;) {
lq_sta->action_counter++;
......@@ -1645,6 +1690,13 @@ static int rs_move_mimo2_to_other(struct iwl_priv *priv,
/* switch in SISO */
tbl->action = IWL_MIMO2_SWITCH_SISO_A;
}
/* configure as 1x1 if bt full concurrency */
if (priv->bt_full_concurrent &&
(tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
tbl->action > IWL_MIMO2_SWITCH_SISO_C))
tbl->action = IWL_MIMO2_SWITCH_SISO_A;
start_action = tbl->action;
for (;;) {
lq_sta->action_counter++;
......@@ -1810,6 +1862,13 @@ static int rs_move_mimo3_to_other(struct iwl_priv *priv,
/* switch in SISO */
tbl->action = IWL_MIMO3_SWITCH_SISO_A;
}
/* configure as 1x1 if bt full concurrency */
if (priv->bt_full_concurrent &&
(tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
tbl->action > IWL_MIMO3_SWITCH_SISO_C))
tbl->action = IWL_MIMO3_SWITCH_SISO_A;
start_action = tbl->action;
for (;;) {
lq_sta->action_counter++;
......@@ -2741,7 +2800,8 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
/* Fill 1st table entry (index 0) */
lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
if (num_of_ant(tbl_type.ant_type) == 1) {
if (num_of_ant(tbl_type.ant_type) == 1 ||
(priv && priv->bt_full_concurrent)) {
lq_cmd->general_params.single_stream_ant_msk =
tbl_type.ant_type;
} else if (num_of_ant(tbl_type.ant_type) == 2) {
......@@ -2752,8 +2812,12 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
index++;
repeat_rate--;
if (priv)
if (priv) {
if (priv->bt_full_concurrent)
valid_tx_ant = ANT_A;
else
valid_tx_ant = priv->hw_params.valid_tx_ant;
}
/* Fill rest of rate table */
while (index < LINK_QUAL_MAX_RETRY_NUM) {
......
......@@ -461,6 +461,11 @@ static void iwlagn_tx_cmd_build_rate(struct iwl_priv *priv,
rate_flags |= RATE_MCS_CCK_MSK;
/* Set up antennas */
if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
/* operated as 1x1 in full concurrency mode */
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
first_antenna(priv->hw_params.valid_tx_ant));
} else
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
priv->hw_params.valid_tx_ant);
rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
......
......@@ -87,6 +87,8 @@ MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_ALIAS("iwl4965");
static int iwlagn_ant_coupling;
/**
* iwl_commit_rxon - commit staging_rxon to hardware
*
......@@ -612,6 +614,33 @@ static void iwl_bg_beacon_update(struct work_struct *work)
iwl_send_beacon_cmd(priv);
}
static void iwl_bg_bt_full_concurrency(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, bt_full_concurrency);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv))
return;
IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
priv->bt_full_concurrent ?
"full concurrency" : "3-wire");
/*
* LQ & RXON updated cmds must be sent before BT Config cmd
* to avoid 3-wire collisions
*/
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv);
iwlcore_commit_rxon(priv);
priv->cfg->ops->hcmd->send_bt_config(priv);
}
/**
* iwl_bg_statistics_periodic - Timer callback to queue statistics
*
......@@ -2776,6 +2805,8 @@ static void __iwl_down(struct iwl_priv *priv)
/* reset BT coex data */
priv->bt_traffic_load = 0;
priv->bt_sco_active = false;
priv->bt_full_concurrent = false;
priv->bt_ci_compliance = 0;
/* Unblock any waiting calls */
wake_up_interruptible_all(&priv->wait_command_queue);
......@@ -3079,7 +3110,8 @@ static void iwl_bg_restart(struct work_struct *data)
return;
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
bool bt_sco;
bool bt_sco, bt_full_concurrent;
u8 bt_ci_compliance;
u8 bt_load;
mutex_lock(&priv->mutex);
......@@ -3096,11 +3128,15 @@ static void iwl_bg_restart(struct work_struct *data)
* command.
*/
bt_sco = priv->bt_sco_active;
bt_full_concurrent = priv->bt_full_concurrent;
bt_ci_compliance = priv->bt_ci_compliance;
bt_load = priv->bt_traffic_load;
__iwl_down(priv);
priv->bt_sco_active = bt_sco;
priv->bt_full_concurrent = bt_full_concurrent;
priv->bt_ci_compliance = bt_ci_compliance;
priv->bt_traffic_load = bt_load;
mutex_unlock(&priv->mutex);
......@@ -3856,6 +3892,7 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
......@@ -3898,6 +3935,7 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv)
cancel_delayed_work(&priv->alive_start);
cancel_work_sync(&priv->run_time_calib_work);
cancel_work_sync(&priv->beacon_update);
cancel_work_sync(&priv->bt_full_concurrency);
del_timer_sync(&priv->statistics_periodic);
del_timer_sync(&priv->ucode_trace);
}
......@@ -4078,6 +4116,11 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
priv->pci_dev = pdev;
priv->inta_mask = CSR_INI_SET_MASK;
/* is antenna coupling more than 35dB ? */
priv->bt_ant_couple_ok =
(iwlagn_ant_coupling > IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
true : false;
if (iwl_alloc_traffic_mem(priv))
IWL_ERR(priv, "Not enough memory to generate traffic log\n");
......@@ -4611,3 +4654,7 @@ module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
S_IRUGO);
MODULE_PARM_DESC(ucode_alternative,
"specify ucode alternative to use from ucode file");
module_param_named(antenna_coupling, iwlagn_ant_coupling, int, S_IRUGO);
MODULE_PARM_DESC(antenna_coupling,
"specify antenna coupling in dB (defualt: 0 dB)");
......@@ -780,6 +780,10 @@ EXPORT_SYMBOL(iwl_set_rxon_ht);
*/
static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
{
if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
/* operated as 1x1 in full concurrency mode */
return IWL_NUM_RX_CHAINS_SINGLE;
}
/* # of Rx chains to use when expecting MIMO. */
if (is_single_rx_stream(priv))
return IWL_NUM_RX_CHAINS_SINGLE;
......@@ -841,6 +845,11 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
else
active_chains = priv->hw_params.valid_rx_ant;
if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
/* operated as 1x1 in full concurrency mode */
active_chains = first_antenna(active_chains);
}
rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
/* How many receivers should we use? */
......
......@@ -736,5 +736,6 @@ static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
}
extern bool bt_coex_active;
extern bool bt_siso_mode;
#endif /* __iwl_core_h__ */
......@@ -1065,6 +1065,9 @@ struct iwl_event_log {
#define IWL_LONG_MONITORING_PERIOD (5000)
#define IWL_ONE_HUNDRED_MSECS (100)
/* BT Antenna Coupling Threshold (dB) */
#define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35)
enum iwl_reset {
IWL_RF_RESET = 0,
IWL_FW_RESET,
......@@ -1364,6 +1367,9 @@ struct iwl_priv {
u8 bt_traffic_load, notif_bt_traffic_load;
bool bt_sco_active;
bool bt_full_concurrent;
bool bt_ant_couple_ok;
u8 bt_ci_compliance;
struct work_struct bt_traffic_change_work;
struct iwl_hw_params hw_params;
......@@ -1384,6 +1390,7 @@ struct iwl_priv {
struct work_struct ct_exit;
struct work_struct start_internal_scan;
struct work_struct tx_flush;
struct work_struct bt_full_concurrency;
struct tasklet_struct irq_tasklet;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment