Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/i2c-2.6

Documentation/i2c/porting-clients

@@ -92,10 +92,7 @@ Technical changes:
   i2c_get_clientdata(client) instead.
 
 * [Interface] Init function should not print anything. Make sure
-  there is a MODULE_LICENSE() line. MODULE_PARM() is replaced
-  by module_param(). Note that module_param has a third parameter,
-  that you should set to 0 by default. See include/linux/moduleparam.h
-  for details.
+  there is a MODULE_LICENSE() line.
 
 Coding policy:
 

drivers/i2c/busses/i2c-parport.h

@@ -67,12 +67,13 @@ static struct adapter_parm adapter_parm[] = {
 		.getsda	= { 0x40, STAT, 1 },
 		.getscl	= { 0x08, STAT, 1 },
 	},
-	/* type 4: ADM 1032 evaluation board */
+	/* type 4: ADM1025 and ADM1032 evaluation boards */
 	{
 		.setsda	= { 0x02, DATA, 1 },
 		.setscl	= { 0x01, DATA, 1 },
 		.getsda	= { 0x10, STAT, 1 },
-		.init	= { 0xf0, DATA, 0 },
+		.init	= { 0xf0, DATA, 0 }, /* ADM1025 doesn't need this,
+						but it doesn't hurt */
 	},
 };
 
@@ -84,4 +85,4 @@ MODULE_PARM_DESC(type,
 	" 1 = home brew teletext adapter\n"
 	" 2 = Velleman K8000 adapter\n"
 	" 3 = ELV adapter\n"
-	" 4 = ADM 1032 evalulation board\n");
+	" 4 = ADM1025 and ADM1032 evaluation boards\n");

drivers/i2c/busses/i2c-philips-par.c

@@ -184,8 +184,8 @@ static void i2c_parport_attach (struct parport *port)
 		return;
 	}
 	/* reset hardware to sane state */
-	bit_lp_setsda(port, 1);
-	bit_lp_setscl(port, 1);
+	adapter->bit_lp_data.setsda(port, 1);
+	adapter->bit_lp_data.setscl(port, 1);
 	parport_release(adapter->pdev);
 
 	if (i2c_bit_add_bus(&adapter->adapter) < 0) {

drivers/i2c/busses/i2c-piix4.c

@@ -68,6 +68,9 @@ struct sd {
 #define SMBSLVEVT	(0xA + piix4_smba)
 #define SMBSLVDAT	(0xC + piix4_smba)
 
+/* count for request_region */
+#define SMBIOSIZE	8
+
 /* PCI Address Constants */
 #define SMBBA		0x090
 #define SMBHSTCFG	0x0D2
@@ -112,14 +115,13 @@ MODULE_PARM_DESC(fix_hstcfg,
 
 static int piix4_transaction(void);
 
-
 static unsigned short piix4_smba = 0;
 static struct i2c_adapter piix4_adapter;
 
 /*
  * Get DMI information.
  */
-static int ibm_dmi_probe(void)
+static int __devinit ibm_dmi_probe(void)
 {
 #ifdef CONFIG_X86
 	extern int is_unsafe_smbus;
@@ -129,9 +131,9 @@ static int ibm_dmi_probe(void)
 #endif
 }
 
-static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id)
+static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
+				const struct pci_device_id *id)
 {
-	int error_return = 0;
 	unsigned char temp;
 
 	/* match up the function */
@@ -144,8 +146,7 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id
 		dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
 			"may corrupt your serial eeprom! Refusing to load "
 			"module!\n");
-		error_return = -EPERM;
-		goto END;
+		return -EPERM;
 	}
 
 	/* Determine the address of the SMBus areas */
@@ -163,11 +164,10 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id
 		}
 	}
 
-	if (!request_region(piix4_smba, 8, "piix4-smbus")) {
+	if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
 		dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
 			piix4_smba);
-		error_return = -ENODEV;
-		goto END;
+		return -ENODEV;
 	}
 
 	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
@@ -214,8 +214,9 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id
 		} else {
 			dev_err(&PIIX4_dev->dev,
 				"Host SMBus controller not enabled!\n");
-			error_return = -ENODEV;
-			goto END;
+			release_region(piix4_smba, SMBIOSIZE);
+			piix4_smba = 0;
+			return -ENODEV;
 		}
 	}
 
@@ -231,8 +232,7 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id
 	dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp);
 	dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba);
 
-END:
-	return error_return;
+	return 0;
 }
 
 /* Another internally used function */
@@ -465,7 +465,8 @@ static struct pci_device_id piix4_ids[] = {
 	{ 0, }
 };
 
-static int __devinit piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit piix4_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
 {
 	int retval;
 
@@ -479,17 +480,24 @@ static int __devinit piix4_probe(struct pci_dev *dev, const struct pci_device_id
 	snprintf(piix4_adapter.name, I2C_NAME_SIZE,
 		"SMBus PIIX4 adapter at %04x", piix4_smba);
 
-	retval = i2c_add_adapter(&piix4_adapter);
+	if ((retval = i2c_add_adapter(&piix4_adapter))) {
+		dev_err(&dev->dev, "Couldn't register adapter!\n");
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+	}
 
 	return retval;
 }
 
 static void __devexit piix4_remove(struct pci_dev *dev)
 {
+	if (piix4_smba) {
 		i2c_del_adapter(&piix4_adapter);
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+	}
 }
 
-
 static struct pci_driver piix4_driver = {
 	.name		= "piix4-smbus",
 	.id_table	= piix4_ids,
@@ -502,15 +510,13 @@ static int __init i2c_piix4_init(void)
 	return pci_module_init(&piix4_driver);
 }
 
-
 static void __exit i2c_piix4_exit(void)
 {
 	pci_unregister_driver(&piix4_driver);
-	release_region(piix4_smba, 8);
 }
 
-MODULE_AUTHOR
-    ("Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+		"Philip Edelbrock <phil@netroedge.com>");
 MODULE_DESCRIPTION("PIIX4 SMBus driver");
 MODULE_LICENSE("GPL");
 

drivers/i2c/chips/lm75.c

@@ -104,9 +104,9 @@ static ssize_t set_##value(struct device *dev, const char *buf, size_t count)	\
 set(temp_max, LM75_REG_TEMP_OS);
 set(temp_hyst, LM75_REG_TEMP_HYST);
 
-static DEVICE_ATTR(temp_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
-static DEVICE_ATTR(temp_input, S_IRUGO, show_temp_input, NULL);
+static DEVICE_ATTR(temp_max1, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
+static DEVICE_ATTR(temp_hyst1, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp_input, NULL);
 
 static int lm75_attach_adapter(struct i2c_adapter *adapter)
 {
@@ -197,9 +197,9 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
 	lm75_init_client(new_client);
 	
 	/* Register sysfs hooks */
-	device_create_file(&new_client->dev, &dev_attr_temp_max);
-	device_create_file(&new_client->dev, &dev_attr_temp_hyst);
-	device_create_file(&new_client->dev, &dev_attr_temp_input);
+	device_create_file(&new_client->dev, &dev_attr_temp_max1);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
+	device_create_file(&new_client->dev, &dev_attr_temp_input1);
 
 	return 0;
 

drivers/i2c/chips/lm78.c

@@ -369,10 +369,10 @@ static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count)
 	return count;
 }
 
-static DEVICE_ATTR(temp_input, S_IRUGO, show_temp, NULL)
-static DEVICE_ATTR(temp_max, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp_input1, S_IRUGO, show_temp, NULL)
+static DEVICE_ATTR(temp_max1, S_IRUGO | S_IWUSR,
 		show_temp_over, set_temp_over)
-static DEVICE_ATTR(temp_hyst, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp_hyst1, S_IRUGO | S_IWUSR,
 		show_temp_hyst, set_temp_hyst)
 
 /* 3 Fans */
@@ -678,9 +678,9 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &dev_attr_in_input6);
 	device_create_file(&new_client->dev, &dev_attr_in_min6);
 	device_create_file(&new_client->dev, &dev_attr_in_max6);
-	device_create_file(&new_client->dev, &dev_attr_temp_input);
-	device_create_file(&new_client->dev, &dev_attr_temp_max);
-	device_create_file(&new_client->dev, &dev_attr_temp_hyst);
+	device_create_file(&new_client->dev, &dev_attr_temp_input1);
+	device_create_file(&new_client->dev, &dev_attr_temp_max1);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
 	device_create_file(&new_client->dev, &dev_attr_fan_input1);
 	device_create_file(&new_client->dev, &dev_attr_fan_min1);
 	device_create_file(&new_client->dev, &dev_attr_fan_div1);

drivers/i2c/chips/lm85.c

@@ -48,9 +48,6 @@ static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
 /* Insmod parameters */
 SENSORS_INSMOD_4(lm85b, lm85c, adm1027, adt7463);
 
-/* Enable debug if true */
-static int	lm85debug = 0;
-
 /* The LM85 registers */
 
 #define	LM85_REG_IN(nr)			(0x20 + (nr))
@@ -802,19 +799,15 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
 	company = lm85_read_value(new_client, LM85_REG_COMPANY);
 	verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
 
-	if (lm85debug) {
-		printk("lm85: Detecting device at %d,0x%02x with"
+	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
 		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
 		i2c_adapter_id(new_client->adapter), new_client->addr,
 		company, verstep);
-	}
 
 	/* If auto-detecting, Determine the chip type. */
 	if (kind <= 0) {
-		if (lm85debug) {
-			printk("lm85: Autodetecting device at %d,0x%02x ...\n",
+		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
 			i2c_adapter_id(adapter), address );
-		}
 		if( company == LM85_COMPANY_NATIONAL
 		    && verstep == LM85_VERSTEP_LM85C ) {
 			kind = lm85c ;
@@ -823,8 +816,8 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
 			kind = lm85b ;
 		} else if( company == LM85_COMPANY_NATIONAL
 		    && (verstep & 0xf0) == LM85_VERSTEP_GENERIC ) {
-			printk("lm85: Unrecgonized version/stepping 0x%02x"
-			    " Defaulting to LM85.\n", verstep );
+			dev_err(&adapter->dev, "Unrecgonized version/stepping 0x%02x"
+				" Defaulting to LM85.\n", verstep);
 			kind = any_chip ;
 		} else if( company == LM85_COMPANY_ANALOG_DEV
 		    && verstep == LM85_VERSTEP_ADM1027 ) {
@@ -834,19 +827,17 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
 			kind = adt7463 ;
 		} else if( company == LM85_COMPANY_ANALOG_DEV
 		    && (verstep & 0xf0) == LM85_VERSTEP_GENERIC ) {
-			printk("lm85: Unrecgonized version/stepping 0x%02x"
-			    " Defaulting to ADM1027.\n", verstep );
+			dev_err(&adapter->dev, "Unrecgonized version/stepping 0x%02x"
+				" Defaulting to ADM1027.\n", verstep);
 			kind = adm1027 ;
 		} else if( kind == 0 && (verstep & 0xf0) == 0x60) {
-			printk("lm85: Generic LM85 Version 6 detected\n");
+			dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
 			/* Leave kind as "any_chip" */
 		} else {
-			if (lm85debug) {
-				printk("lm85: Autodetection failed\n");
-			}
+			dev_dbg(&adapter->dev, "Autodetection failed\n");
 			/* Not an LM85 ... */
 			if( kind == 0 ) {  /* User used force=x,y */
-			    printk("lm85: Generic LM85 Version 6 not"
+				dev_err(&adapter->dev, "Generic LM85 Version 6 not"
 					" found at %d,0x%02x. Try force_lm85c.\n",
 					i2c_adapter_id(adapter), address );
 			}
@@ -879,12 +870,10 @@ int lm85_detect(struct i2c_adapter *adapter, int address,
 	data->valid = 0;
 	init_MUTEX(&data->update_lock);
 
-	if (lm85debug) {
-		printk("lm85: Assigning ID %d to %s at %d,0x%02x\n",
+	dev_dbg(&adapter->dev, "Assigning ID %d to %s at %d,0x%02x\n",
 		new_client->id, new_client->name,
 		i2c_adapter_id(new_client->adapter),
 		new_client->addr);
-	}
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
@@ -1021,31 +1010,24 @@ void lm85_init_client(struct i2c_client *client)
 	int value;
 	struct lm85_data *data = i2c_get_clientdata(client);
 
-	if (lm85debug) {
-		printk("lm85(%d): Initializing device\n", client->id);
-	}
+	dev_dbg(&client->dev, "Initializing device\n");
 
 	/* Warn if part was not "READY" */
 	value = lm85_read_value(client, LM85_REG_CONFIG);
-	if (lm85debug) {
-		printk("lm85(%d): LM85_REG_CONFIG is: 0x%02x\n", client->id, value );
-	}
+	dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
 	if( value & 0x02 ) {
-		printk("lm85(%d): Client (%d,0x%02x) config is locked.\n",
-			    client->id,
+		dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
 			    i2c_adapter_id(client->adapter), client->addr );
 	};
 	if( ! (value & 0x04) ) {
-		printk("lm85(%d): Client (%d,0x%02x) is not ready.\n",
-			    client->id,
+		dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
 			    i2c_adapter_id(client->adapter), client->addr );
 	};
 	if( value & 0x10
 	    && ( data->type == adm1027
 		|| data->type == adt7463 ) ) {
-		printk("lm85(%d): Client (%d,0x%02x) VxI mode is set.  "
+		dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set.  "
 			"Please report this to the lm85 maintainer.\n",
-			    client->id,
 			    i2c_adapter_id(client->adapter), client->addr );
 	};
 
@@ -1061,11 +1043,8 @@ void lm85_init_client(struct i2c_client *client)
 	value = lm85_read_value(client, LM85_REG_CONFIG);
 	/* Try to clear LOCK, Set START, save everything else */
 	value = (value & ~ 0x02) | 0x01 ;
-	if (lm85debug) {
-		printk("lm85(%d): Setting CONFIG to: 0x%02x\n", client->id, value );
-	}
+	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
 	lm85_write_value(client, LM85_REG_CONFIG, value);
-
 }
 
 void lm85_update_client(struct i2c_client *client)
@@ -1078,10 +1057,8 @@ void lm85_update_client(struct i2c_client *client)
 	if ( !data->valid ||
 	     (jiffies - data->last_reading > LM85_DATA_INTERVAL ) ) {
 		/* Things that change quickly */
+		dev_dbg(&client->dev, "Reading sensor values\n");
 		
-		if (lm85debug) {
-			printk("lm85(%d): Reading sensor values\n", client->id);
-		}
 		/* Have to read extended bits first to "freeze" the
 		 * more significant bits that are read later.
 		 */
@@ -1125,10 +1102,8 @@ void lm85_update_client(struct i2c_client *client)
 	if ( !data->valid ||
 	     (jiffies - data->last_config > LM85_CONFIG_INTERVAL) ) {
 		/* Things that don't change often */
+		dev_dbg(&client->dev, "Reading config values\n");
 
-		if (lm85debug) {
-			printk("lm85(%d): Reading config values\n", client->id);
-		}
 		for (i = 0; i <= 4; ++i) {
 			data->in_min[i] =
 			    lm85_read_value(client, LM85_REG_IN_MIN(i));
@@ -1234,8 +1209,6 @@ static void  __exit sm_lm85_exit(void)
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>");
 MODULE_DESCRIPTION("LM85-B, LM85-C driver");
-MODULE_PARM(lm85debug, "i");
-MODULE_PARM_DESC(lm85debug, "Enable debugging statements");
 
 module_init(sm_lm85_init);
 module_exit(sm_lm85_exit);