Skip to content

L
linux
Commit c1516b35 authored by Hangbin Liu's avatar Hangbin Liu Committed by Paolo Abeni
Browse files
Options

selftests/net: convert icmp_redirect.sh to run it in unique namespace 

Here is the test result after conversion.

 # ./icmp_redirect.sh

 ###########################################################################
 Legacy routing
 ###########################################################################

 TEST: IPv4: redirect exception                                      [ OK ]

 ...

 TEST: IPv4: mtu exception plus redirect                             [ OK ]
 TEST: IPv6: mtu exception plus redirect                             [ OK ]

 Tests passed:  40
 Tests failed:   0
 Tests xfailed:   0
Acked-by: default avatarDavid Ahern <dsahern@kernel.org>
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
parent baf37f21
Hide whitespace changes
Inline Side-by-side
Showing with 88 additions and 94 deletions
tools/testing/selftests/net/icmp_redirect.sh
View file @ c1516b35
......@@ -19,6 +19,7 @@
# Route on r1 changed to go to r2 via eth0. This causes a redirect to be sent
# from r1 to h1 telling h1 to use r2 when talking to h2.
source lib.sh
VERBOSE=0
PAUSE_ON_FAIL=no
......@@ -140,11 +141,7 @@ get_linklocal()
cleanup()
{
local ns
for ns in h1 h2 r1 r2; do
ip netns del $ns 2>/dev/null
done
cleanup_ns $h1 $h2 $r1 $r2
}
create_vrf()
......@@ -171,102 +168,99 @@ setup()
#
# create nodes as namespaces
#
for ns in h1 h2 r1 r2; do
ip netns add $ns
ip -netns $ns li set lo up
case "${ns}" in
h[12]) ip netns exec $ns sysctl -q -w net.ipv4.conf.all.accept_redirects=1
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.accept_redirects=1
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
;;
r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
esac
setup_ns h1 h2 r1 r2
for ns in $h1 $h2 $r1 $r2; do
if echo $ns | grep -q h[12]-; then
ip netns exec $ns sysctl -q -w net.ipv4.conf.all.accept_redirects=1
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.accept_redirects=1
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
else
ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
fi
done
#
# create interconnects
#
ip -netns h1 li add eth0 type veth peer name r1h1
ip -netns h1 li set r1h1 netns r1 name eth0 up
ip -netns $h1 li add eth0 type veth peer name r1h1
ip -netns $h1 li set r1h1 netns $r1 name eth0 up
ip -netns h1 li add eth1 type veth peer name r2h1
ip -netns h1 li set r2h1 netns r2 name eth0 up
ip -netns $h1 li add eth1 type veth peer name r2h1
ip -netns $h1 li set r2h1 netns $r2 name eth0 up
ip -netns h2 li add eth0 type veth peer name r2h2
ip -netns h2 li set eth0 up
ip -netns h2 li set r2h2 netns r2 name eth2 up
ip -netns $h2 li add eth0 type veth peer name r2h2
ip -netns $h2 li set eth0 up
ip -netns $h2 li set r2h2 netns $r2 name eth2 up
ip -netns r1 li add eth1 type veth peer name r2r1
ip -netns r1 li set eth1 up
ip -netns r1 li set r2r1 netns r2 name eth1 up
ip -netns $r1 li add eth1 type veth peer name r2r1
ip -netns $r1 li set eth1 up
ip -netns $r1 li set r2r1 netns $r2 name eth1 up
#
# h1
#
if [ "${WITH_VRF}" = "yes" ]; then
create_vrf "h1"
create_vrf "$h1"
H1_VRF_ARG="vrf ${VRF}"
H1_PING_ARG="-I ${VRF}"
else
H1_VRF_ARG=
H1_PING_ARG=
fi
ip -netns h1 li add br0 type bridge
ip -netns $h1 li add br0 type bridge
if [ "${WITH_VRF}" = "yes" ]; then
ip -netns h1 li set br0 vrf ${VRF} up
ip -netns $h1 li set br0 vrf ${VRF} up
else
ip -netns h1 li set br0 up
ip -netns $h1 li set br0 up
fi
ip -netns h1 addr add dev br0 ${H1_N1_IP}/24
ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
ip -netns h1 li set eth0 master br0 up
ip -netns h1 li set eth1 master br0 up
ip -netns $h1 addr add dev br0 ${H1_N1_IP}/24
ip -netns $h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
ip -netns $h1 li set eth0 master br0 up
ip -netns $h1 li set eth1 master br0 up
#
# h2
#
ip -netns h2 addr add dev eth0 ${H2_N2_IP}/24
ip -netns h2 ro add default via ${R2_N2_IP} dev eth0
ip -netns h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
ip -netns h2 -6 ro add default via ${R2_N2_IP6} dev eth0
ip -netns $h2 addr add dev eth0 ${H2_N2_IP}/24
ip -netns $h2 ro add default via ${R2_N2_IP} dev eth0
ip -netns $h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
ip -netns $h2 -6 ro add default via ${R2_N2_IP6} dev eth0
#
# r1
#
ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
ip -netns r1 addr add dev eth1 ${R1_R2_N1_IP}/30
ip -netns r1 -6 addr add dev eth1 ${R1_R2_N1_IP6}/126 nodad
ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24
ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
ip -netns $r1 addr add dev eth1 ${R1_R2_N1_IP}/30
ip -netns $r1 -6 addr add dev eth1 ${R1_R2_N1_IP6}/126 nodad
#
# r2
#
ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24
ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
ip -netns r2 addr add dev eth1 ${R2_R1_N1_IP}/30
ip -netns r2 -6 addr add dev eth1 ${R2_R1_N1_IP6}/126 nodad
ip -netns r2 addr add dev eth2 ${R2_N2_IP}/24
ip -netns r2 -6 addr add dev eth2 ${R2_N2_IP6}/64 nodad
ip -netns $r2 addr add dev eth0 ${R2_N1_IP}/24
ip -netns $r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
ip -netns $r2 addr add dev eth1 ${R2_R1_N1_IP}/30
ip -netns $r2 -6 addr add dev eth1 ${R2_R1_N1_IP6}/126 nodad
ip -netns $r2 addr add dev eth2 ${R2_N2_IP}/24
ip -netns $r2 -6 addr add dev eth2 ${R2_N2_IP6}/64 nodad
sleep 2
R1_LLADDR=$(get_linklocal r1 eth0)
R1_LLADDR=$(get_linklocal $r1 eth0)
if [ $? -ne 0 ]; then
echo "Error: Failed to get link-local address of r1's eth0"
exit 1
fi
log_debug "initial gateway is R1's lladdr = ${R1_LLADDR}"
R2_LLADDR=$(get_linklocal r2 eth0)
R2_LLADDR=$(get_linklocal $r2 eth0)
if [ $? -ne 0 ]; then
echo "Error: Failed to get link-local address of r2's eth0"
exit 1
......@@ -278,8 +272,8 @@ change_h2_mtu()
{
local mtu=$1
run_cmd ip -netns h2 li set eth0 mtu ${mtu}
run_cmd ip -netns r2 li set eth2 mtu ${mtu}
run_cmd ip -netns $h2 li set eth0 mtu ${mtu}
run_cmd ip -netns $r2 li set eth2 mtu ${mtu}
}
check_exception()
......@@ -291,40 +285,40 @@ check_exception()
# From 172.16.1.101: icmp_seq=1 Redirect Host(New nexthop: 172.16.1.102)
if [ "$VERBOSE" = "1" ]; then
echo "Commands to check for exception:"
run_cmd ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP}
run_cmd ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6}
run_cmd ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP}
run_cmd ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6}
fi
if [ -n "${mtu}" ]; then
mtu=" mtu ${mtu}"
fi
if [ "$with_redirect" = "yes" ]; then
ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
grep -q "cache <redirected> expires [0-9]*sec${mtu}"
elif [ -n "${mtu}" ]; then
ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
grep -q "cache expires [0-9]*sec${mtu}"
else
# want to verify that neither mtu nor redirected appears in
# the route get output. The -v will wipe out the cache line
# if either are set so the last grep -q will not find a match
ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
grep -E -v 'mtu|redirected' | grep -q "cache"
fi
log_test $? 0 "IPv4: ${desc}" 0
# No PMTU info for test "redirect" and "mtu exception plus redirect"
if [ "$with_redirect" = "yes" ] && [ "$desc" != "redirect exception plus mtu" ]; then
ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
grep -v "mtu" | grep -q "${H2_N2_IP6} .*via ${R2_LLADDR} dev br0"
elif [ -n "${mtu}" ]; then
ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
grep -q "${mtu}"
else
# IPv6 is a bit harder. First strip out the match if it
# contains an mtu exception and then look for the first
# gateway - R1's lladdr
ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
grep -v "mtu" | grep -q "${R1_LLADDR}"
fi
log_test $? 0 "IPv6: ${desc}" 1
......@@ -334,21 +328,21 @@ run_ping()
{
local sz=$1
run_cmd ip netns exec h1 ping -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP}
run_cmd ip netns exec h1 ${ping6} -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP6}
run_cmd ip netns exec $h1 ping -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP}
run_cmd ip netns exec $h1 ${ping6} -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP6}
}
replace_route_new()
{
# r1 to h2 via r2 and eth0
run_cmd ip -netns r1 nexthop replace id 1 via ${R2_N1_IP} dev eth0
run_cmd ip -netns r1 nexthop replace id 2 via ${R2_LLADDR} dev eth0
run_cmd ip -netns $r1 nexthop replace id 1 via ${R2_N1_IP} dev eth0
run_cmd ip -netns $r1 nexthop replace id 2 via ${R2_LLADDR} dev eth0
}
reset_route_new()
{
run_cmd ip -netns r1 nexthop flush
run_cmd ip -netns h1 nexthop flush
run_cmd ip -netns $r1 nexthop flush
run_cmd ip -netns $h1 nexthop flush
initial_route_new
}
......@@ -356,34 +350,34 @@ reset_route_new()
initial_route_new()
{
# r1 to h2 via r2 and eth1
run_cmd ip -netns r1 nexthop add id 1 via ${R2_R1_N1_IP} dev eth1
run_cmd ip -netns r1 ro add ${H2_N2} nhid 1
run_cmd ip -netns $r1 nexthop add id 1 via ${R2_R1_N1_IP} dev eth1
run_cmd ip -netns $r1 ro add ${H2_N2} nhid 1
run_cmd ip -netns r1 nexthop add id 2 via ${R2_R1_N1_IP6} dev eth1
run_cmd ip -netns r1 -6 ro add ${H2_N2_6} nhid 2
run_cmd ip -netns $r1 nexthop add id 2 via ${R2_R1_N1_IP6} dev eth1
run_cmd ip -netns $r1 -6 ro add ${H2_N2_6} nhid 2
# h1 to h2 via r1
run_cmd ip -netns h1 nexthop add id 1 via ${R1_N1_IP} dev br0
run_cmd ip -netns h1 ro add ${H1_VRF_ARG} ${H2_N2} nhid 1
run_cmd ip -netns $h1 nexthop add id 1 via ${R1_N1_IP} dev br0
run_cmd ip -netns $h1 ro add ${H1_VRF_ARG} ${H2_N2} nhid 1
run_cmd ip -netns h1 nexthop add id 2 via ${R1_LLADDR} dev br0
run_cmd ip -netns h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} nhid 2
run_cmd ip -netns $h1 nexthop add id 2 via ${R1_LLADDR} dev br0
run_cmd ip -netns $h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} nhid 2
}
replace_route_legacy()
{
# r1 to h2 via r2 and eth0
run_cmd ip -netns r1 ro replace ${H2_N2} via ${R2_N1_IP} dev eth0
run_cmd ip -netns r1 -6 ro replace ${H2_N2_6} via ${R2_LLADDR} dev eth0
run_cmd ip -netns $r1 ro replace ${H2_N2} via ${R2_N1_IP} dev eth0
run_cmd ip -netns $r1 -6 ro replace ${H2_N2_6} via ${R2_LLADDR} dev eth0
}
reset_route_legacy()
{
run_cmd ip -netns r1 ro del ${H2_N2}
run_cmd ip -netns r1 -6 ro del ${H2_N2_6}
run_cmd ip -netns $r1 ro del ${H2_N2}
run_cmd ip -netns $r1 -6 ro del ${H2_N2_6}
run_cmd ip -netns h1 ro del ${H1_VRF_ARG} ${H2_N2}
run_cmd ip -netns h1 -6 ro del ${H1_VRF_ARG} ${H2_N2_6}
run_cmd ip -netns $h1 ro del ${H1_VRF_ARG} ${H2_N2}
run_cmd ip -netns $h1 -6 ro del ${H1_VRF_ARG} ${H2_N2_6}
initial_route_legacy
}
......@@ -391,22 +385,22 @@ reset_route_legacy()
initial_route_legacy()
{
# r1 to h2 via r2 and eth1
run_cmd ip -netns r1 ro add ${H2_N2} via ${R2_R1_N1_IP} dev eth1
run_cmd ip -netns r1 -6 ro add ${H2_N2_6} via ${R2_R1_N1_IP6} dev eth1
run_cmd ip -netns $r1 ro add ${H2_N2} via ${R2_R1_N1_IP} dev eth1
run_cmd ip -netns $r1 -6 ro add ${H2_N2_6} via ${R2_R1_N1_IP6} dev eth1
# h1 to h2 via r1
# - IPv6 redirect only works if gateway is the LLA
run_cmd ip -netns h1 ro add ${H1_VRF_ARG} ${H2_N2} via ${R1_N1_IP} dev br0
run_cmd ip -netns h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} via ${R1_LLADDR} dev br0
run_cmd ip -netns $h1 ro add ${H1_VRF_ARG} ${H2_N2} via ${R1_N1_IP} dev br0
run_cmd ip -netns $h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} via ${R1_LLADDR} dev br0
}
check_connectivity()
{
local rc
run_cmd ip netns exec h1 ping -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP}
run_cmd ip netns exec $h1 ping -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP}
rc=$?
run_cmd ip netns exec h1 ${ping6} -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP6}
run_cmd ip netns exec $h1 ${ping6} -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP6}
[ $? -ne 0 ] && rc=$?
return $rc
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7